Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.1 CrAccepted-Finance VILL PO BANURI TEHSIL PALAMPUR DISTT KANGRA HP | KANGRA | HIMACHAL PRADESH | 175013 | ₹1.1 Cr | L1 | Accepted-Finance Bidder is found L1 |
| 2 | L2₹1.1 Cr+₹1.9 L (1.68%)Rejected-Finance VILL DAK P O DAHAB TEHSIL FATEHPUR DISTT KANGRA HP | KANGRA | HIMACHAL PRADESH | 176001 | ₹1.1 Cr+₹1.9 L (1.68%) | L2 | Rejected-Finance Bidder is found L2 |
| 3 | Rejected-Technical HIMACHAL PRADESH | - | - | Rejected-Technical Non-Responsive |
| 4 | Rejected-Technical HPSEBL THALOUT | - | - | Rejected-Technical Non-Responsive |
| Sl No | Description | Qty | Unit | CHANDER MOHAN RANA L2 | SHARMILA L1 |
|---|---|---|---|---|---|
| 1.00 | Earth work in excavation by mechanical means (Hydraulic excavator) over area( exceedig 30 cm in depth 1.50 mts in width as well as 10 sqm in plan) including getting out and disposal of excavated earth lead up to 50 mts and lift up to 1.50 mts as directed by Engineer-in-incharge (In all kinds of soil) including entire carriage of material within all leads, lifts up to all floor level and heights. The rate is inclusive of octrai,royality malkana toll tax,GST and all type of other taxes imposed by the Government. | 210.76 | Per cubic metre | 400 ₹84,304 | 395 ₹83,250.2 Lowest |
| 2.00 | Excavation in foundations, trenches etc.in earth work in all kind of soil such as pick work, jumper work including blasting/ chiseling/wedging work in dry or saturated conditions up to any depth including stacking the excavated soil serviceable and unserviceable materials separately and then in fifteen centimeters layers when required into plinth side of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil unserviceable material and stacking the serviceable materials as directed by the Engineer-in-charge within all leads & lifts and all disposed materials to be neatly leveled. including entire carriage of material within all leads, lifts up to all floor level and heights. The rate is inclusive of octrai,royality malkana toll tax,GST and all type of other taxes imposed by the Government. | 96.82 | Per cubic metre | 425 ₹41,148.5 | 410 ₹39,696.2 Lowest |
| 3.00 | Providing and laying cement concrete 1:6:12(1cement:6sand:12 graded crushed stone aggregate 40mm.Nominal size) and curing complete excluding cost of centring and shuttering in foundation and plinth by using mechanical mixer including entire carriage of material within all leads & lifts . The rate is inclusive of octrai,royality malkana toll tax,GST and all type of other taxes imposed by the Government. | 49.81 | Per cubic metre | 4,900 ₹2,44,069 Lowest | 5,000 ₹2,49,050 |
| 4.00 | Stone soling properly hand-packed filling interstices with spalls and consolidating with power road roller to the requested gradient and comber including spreading watering and rolling of binding materials moorum or earth etc. complete as per HP.PWD specification. 100 mm spread thickness (finished work including materials and labour) including entire carriage of material within all leads & lifts. | 26.63 | Per cubic metre | 1,950 ₹51,928.5 | 1,900 ₹50,597 Lowest |
| 5.00 | Providing and Laying cement concrete 1:4:8 and curing complete including the cost of formwork for plain/reinforced concrete in retaining walls, breast walls, as per drawing and HP.PWD technical specifications P.C.C nominal mix 1:4:8 (40 mm aggregates) including entire carriage of material within all leads & lifts. | 228.34 | Per cubic metre | 5,700 ₹13,01,538 | 5,500 ₹12,55,870 Lowest |
| 6.00 | Stone Filling behind retaining walls including entire carriage of material within all lead & lifts. The rate is inclusive of octrai,royality malkana toll tax,GST and all type of other taxes imposed by the Government. | 38.9 | Per cubic metre | 1,490 ₹57,961 Lowest | 1,500 ₹58,350 |
| 7.00 | Providing weapholes in brick masonry / stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100 mm dia PVC pipe extending through the full with of the structures with slop of 1(v):20(H) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7 including entire carriage of material within all leads & lifts.The rate is inclusive of octrai,royality malkana toll tax,GST and all type of other taxes imposed by the Government. | 132 | Each | 298 ₹39,336 | 290 ₹38,280 Lowest |
| 8.00 | Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm.so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4 mtr. and removal of the same for insitu-reinforced concrete & plain concrete work Foundation, footings basis of columns etc. and mass concrete including entire carriage of material within all leads, lifts up to all floor level and heights. The rate is inclusive of octrai,royality malkana toll tax,GST and all type of other taxes imposed by the Government. | 127.41 | Per square metre | 400 ₹50,964 | 300 ₹38,223 Lowest |
| 9.00 | Providing and laying cement concrete 1:2:4 (1 cement:2 Sand:4 graded crushed stone aggregate 20mm nominal size) and curing complete excluding cost of form work in Foundation and plinth including entire carriage of material within all leads and lifts.The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government. | 24.91 | Per square metre | 7,200 ₹1,79,352 | 6,800 ₹1,69,388 Lowest |
| 10.00 | Providing and laying granite stone in flooring steps 20mm (average)thickness base of cement mortar 1:3(1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone 20mm.thick including rubbing and polishing complete including entire carriage of material within all leads, lifts up to all floor level and heights. The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government. | 119.03 | Per square metre | 4,790 ₹5,70,153.7 Lowest | 4,900 ₹5,83,247 |
Tender Value
₹71.3 L
EMD Value
₹1.4 L
Closing Date
25 Nov 2025, 5:00 pmClosed
Executive Engineer (C)
Executive Engineer (C) CSKHPKV Palampur
Construction of Labs and Examination Hall for Under Graduate Students COA CSKHPKV,Palampur. (SH Construction of Balance Civil work, Retaining Walls, Drains, Approach Road and W.S and S.I)
2025_HPKV_120013_1
EE CSKHPKV NIT No. 4092-4108 dt 03/11/2025
Open Tender
Construction Works
Item Rate
CSKHPKV, Palampur
Please refer Tender documents.
7 documents required · 7 mandatory
₹2,000
EE(C) CSKHPKV , Palampur
₹1.4 L
4 Dec 2025
11 Nov 2025
26 Nov 2025
11 Nov 2025
25 Nov 2025
11 Nov 2025
Amount
Earth work in excavation by mechanical means (Hydraulic excavator) over area( exceedig 30 cm in depth 1.50 mts in width as well as 10 sqm in plan) including getting out and disposal of excavated earth lead up to 50 mts and lift up to 1.50 mts as directed by Engineer-in-incharge (In all kinds of soil) including entire carriage of material within all leads, lifts up to all floor level and heights. The rate is inclusive of octrai,royality malkana toll tax,GST and all type of other taxes imposed by the Government.
Excavation in foundations, trenches etc.in earth work in all kind of soil such as pick work, jumper work including blasting/ chiseling/wedging work in dry or saturated conditions up to any depth including stacking the excavated soil serviceable and unserviceable materials separately and then in fifteen centimeters layers when required into plinth side of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil unserviceable material and stacking the serviceable materials as directed by the Engineer-in-charge within all leads & lifts and all disposed materials to be neatly leveled. including entire carriage of material within all leads, lifts up to all floor level and heights. The rate is inclusive of octrai,royality malkana toll tax,GST and all type of other taxes imposed by the Government.
Providing and laying cement concrete 1:6:12(1cement:6sand:12 graded crushed stone aggregate 40mm.Nominal size) and curing complete excluding cost of centring and shuttering in foundation and plinth by using mechanical mixer including entire carriage of material within all leads & lifts . The rate is inclusive of octrai,royality malkana toll tax,GST and all type of other taxes imposed by the Government.
Stone soling properly hand-packed filling interstices with spalls and consolidating with power road roller to the requested gradient and comber including spreading watering and rolling of binding materials moorum or earth etc. complete as per HP.PWD specification. 100 mm spread thickness (finished work including materials and labour) including entire carriage of material within all leads & lifts.
Providing and Laying cement concrete 1:4:8 and curing complete including the cost of formwork for plain/reinforced concrete in retaining walls, breast walls, as per drawing and HP.PWD technical specifications P.C.C nominal mix 1:4:8 (40 mm aggregates) including entire carriage of material within all leads & lifts.
Stone Filling behind retaining walls including entire carriage of material within all lead & lifts. The rate is inclusive of octrai,royality malkana toll tax,GST and all type of other taxes imposed by the Government.
Providing weapholes in brick masonry / stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100 mm dia PVC pipe extending through the full with of the structures with slop of 1(v):20(H) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7 including entire carriage of material within all leads & lifts.The rate is inclusive of octrai,royality malkana toll tax,GST and all type of other taxes imposed by the Government.
Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm.so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4 mtr. and removal of the same for insitu-reinforced concrete & plain concrete work Foundation, footings basis of columns etc. and mass concrete including entire carriage of material within all leads, lifts up to all floor level and heights. The rate is inclusive of octrai,royality malkana toll tax,GST and all type of other taxes imposed by the Government.
Providing and laying cement concrete 1:2:4 (1 cement:2 Sand:4 graded crushed stone aggregate 20mm nominal size) and curing complete excluding cost of form work in Foundation and plinth including entire carriage of material within all leads and lifts.The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government.
Providing and laying granite stone in flooring steps 20mm (average)thickness base of cement mortar 1:3(1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone 20mm.thick including rubbing and polishing complete including entire carriage of material within all leads, lifts up to all floor level and heights. The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government.
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 cousre sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent as specified and as directed by the Engineer-in-Charge including entire carriage of material within all leads, lifts up to all floor level and heights. The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government.
Providing edge moulding to 18 mm thick granite/ marble/ stone/ kota stone venties furniture etc(for pre finished nosing in Granite for shelves /steps) including machine polishing to edge to give high class finish complete as per design approved by Engineer in charge for pre finished nosing in Granite for shelves /steps including entire carriage of material within all leads, lifts up to all floor level and heights. The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government.
Providing & fixing Homogeneous vitrified tiles (600x600mm x10mm) (Double charge jointless) antiskid water proof stain and impact resistant heavy duty manufactured of approved shade and colour in flooring, treads of steps and landing laid over 12mm thick cement mortar 1:3(1cement:3sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including entire carriage of material within all leads, lifts up to all floor level and heights. The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government. (Nitco/Kajaria/ Somany make)
Providing and laying coloured glazed digital tiles of approved make 6mm thick (300x450mm or 300x600mm size ) in skirting ,risers of steps on 12mm thick cement mortar 1:3 (1cement:3 sand) and jointed with cement slurry of white cement including entire carriage of material within all leads, lifts up to all floor level and heights. The rate is inclusive of octrai,royality malkana toll tax,GST and all type of other taxes imposed by the Government ( Nitco/ Kajaria / Somany make)
Providing and laying Coloured printed jointless antiskid floor tiles 6 mm thick in flooring (300 x300mm. size)treads of steps laid on a bed of 12mm. thick cement mortar 1:3(1cement: 3 sand) finished with flush pointing in white cement including entire carriage of material within all leads, lifts up to all floor level and heights. The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government ( Nitco/ Kajaria / Somany make)
Providing and laying Duro stone vetrified tiles (300x300mmx10mm) in grey/coloured or of approved shade in flooring, treads of steps and riser landing laid on a bed of 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including entire carriage of material within all leads and lifts.(Nitco/Kajaria/Somany make)
Providing and laying heavy duty precast cement concrete inter locking paver blocks vibro compacted upto M-50 grade including border or kurb block grey or coloured over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing & polishing complete (Sub base concrete floor to be paid for separately) 80 mm thick inter locking blocks including entire carriage of material within all lead & lifts. The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government.
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular and other section of approved make conforming to IS-733 and IS-1285 anodised transparent or dyed to required shade according to IS-1858 (Minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips or with expansioin hold fastners including necessary filling up of junctions at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth ,rust free, straight mitred and jointed mechanically where ever required including cleat angle, aluminium snap glazing/paneling, C.P. brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge (aluminium shall be Jindal aluminium of specified sections) including entire carriage of material within all leads, lifts up to all floor level and heights. The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government.
For doors windows and ventilators & glazed partition frames.
For shutters of doors, windows & ventilators including providing and fixing hinges/privets and making for fixing of fittings where ever required including the cost of PVC neoprene gaskets required(fittings & glazing/paneling shall be paid for separately.
Providing and fixing board partitions with butt jointing & nails (frame work & cover fillets to be measured and paid for seperately). Prelaminated board bwp phenol bonded exterior/interior grade both sides.12mm thick including entire carriage of material within all leads and lifts. The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government.
Providing and fixing glazing in aluminium door, window, ventilators shutters and partition etc. with PVC/neoprene complete as per the architectural drawings and the directions of Engineer-in-charge(cost of aluminium snap beading shall be paid in basic item). With glass panes of 5.50mm. thickness(weight not less than 13.75 kg/sqm) including entire carriage of material within all leads, lifts up to all floor level and heights. The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government.
Providing and fixing aluminium anodised powder coated grill of required pattern to existing window/ ventilatior with 80mmx80mm panels holes with 25x8mm thick aluminium flat in windows and ventilators including fixing with aluminium screws or bolts and nuts complete in alluminium channels base frames (Aluminiumchannels base frames to be measured and paid for separtely including entire carriage of material within all leads and lifts. The rate is inclusive of octrai,royality malkana toll tax,GST and all type of other taxes imposed by the Government.
Providing and fixing double action hydraulic floor spring of approved brand and manufacture (conforming to IS 6315) for aluminium door including cost of cutting floor as required embedding in floors and cover plates etc. complete as per the direction of Engineer-In-Charge including making good the floors including entire carriage of material within all leads, lifts up to all floor level and heights. The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government.
Filling the gap in between aluminium frame and adjacent RCC/brick/stone work by providing weather silicon sealent cover backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete Upto 5mm depth and 5 mm width including entire carriage of material within all leads, lifts up to all floor level and heights. The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government.
Providing and fixing stainless steel ( Grade 304) railing upto 90 cm height made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge,( for payment purpose only weight of stainless steel members shall be econsidered excluding fixing accessories such as nuts, bolts, fasteners etc.) including entire carriage of material within all leads, lifts up to all floor level and heights. The rate is inclusive of octrai,royality malkana toll tax,GST and all type of other taxes imposed by the Government.
Providing and fixing anodized aluminium, sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete of superior brand as approved by the Engineer-in-charge including entire carriage of material within all leads, lifts up to all floor level and heights. The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government.
300x16mm size
250X16mm size
Providing and fixing aluminium tower bolts(berrel type) anodized transparent or dyed to required shade and colour with screws etc. complete of superior brand as approved by the Engineer-in-charge including entire carriage of material within all leads, lifts up to all floor level and heights. The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government.
200x10mm size
100x10mm size
Providing and fixing aluminium handles anodized transparent or dyed to required colour of shade with necessary screws etc. complete of superior brand as approved by the Engineer-in-charge including entire carriage of material within all leads, lifts up to all floor level and heights. The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government.
125mm size
100mm size
Providing and fixing 100mm bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete including entire carriage of material within all lead & lifts.The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government
Providing and fixing oxidized M.S hooks and eyes 150mm including entire carriage of material within all leads, lifts up to all floor level and heights. The rate is inclusive of octrai, royality malkana toll tax,GST and all type of other taxes imposed by the Government
Providing and fixing 8mm thick Cement bonded partical board ceiling of approved quality with butt jointing and nail (frame work and cover fillets to be paid for separately including entire carriage of material within all leads, lifts up to all floor level and heights. The rate is inclusive of octrai, royality malkana toll tax,GST and all type of other taxes imposed by the Government
Applying priming coat on new concrete/masonry/asbestos cement/plastered surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter and sand papering as required with Readymixed primer including entire carriage of material within all leads, lifts up to all floor level and heights. The rate is inclusive of octrai,royality malkana toll tax,GST and all type of other taxes imposed by the Government. (Nerolac/Asian make 1st quality)
Painting two coats (excluding priming coat) on new steel and other metal surfaces with ready mixed paint brushing to give an even shade including cleaning the surface of all dirt,dust and other foregin matters With white enamel paint other than white including entire carriage of material within all leads, lifts up to all floor level and heights. The rate is inclusive of octrai,royality malkana toll tax,GST and all type of other taxes imposed by the Government. (Nerolac/Asian make 1st quality)
Providing and fixing floor mounted,white vitreous china single piece closets,double trap syphonic water closet of approved brand/make,shape,size and pattern including integrated white vitreous china cistern of capacity 10 liters with dual flushing system,including all fittings and fixtures with soft close seat cover,cistern fittings,nuts,bolts and gasket etc including making connection with the existing P/S trap complete in all respect as per the direction of Engineer-in-Charge (Hindware/ Jaguar SOLO SLS-WHT-6851S110PP ) size:360x640x685 mm S trap :110 mm including entire carriage of material within all leads, lifts up to all floor level and heights. The rate is inclusive of octrai,royality malkana toll tax,GST and all type of other taxes imposed by the Government.
Providing and fixing CP brass bib tap with capstan head: 15mm.dia ( Hindware contesa/ Jaquar Continental / C-Zar/Nova-Specturm make) Short Body including entire carriage of material within all leads, lifts up to all floor level and heights. The rate is inclusive of octrai,royality malkana toll tax,GST and all type of other taxes imposed by the Government
Providing and fixing C.P Brass pillar tap with Capstan head 15mm dia ( Hindware contesa/ Jaquar Continental / C-Zar/Nova-Specturm make) including entire carriage of material within all leads, lifts up to all floor level and heights. The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government
Providing and fixing C.P. brass angle valve 15mm without Nuts and pipe ( Hindware contesa/ Jaquar Continental / C-Zar/Nova-Specturm make) including entire carriage of material within all leads, lifts up to all floor level and heights. The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government
Providing and fixing CP soap dish with CP brass bracket to wooden cleats with CP brass screws of superiour quality including entire carriage of material within all leads & lifts.
Providing and fixing P.V.C connection with brass unions 300/450mm length 15mm nominal bore of superiour quality including entire carriage of material within all leads, lifts up to all floor level and heights. The rate is inclusive of octrai,royality malkana toll tax,GST and all type of other taxes imposed by the Government.
Providing and fixing 100mm stainless steel grating for gully, floor or Nahni trap of superiour quality including entire carriage of material within all leads, lifts up to all floor level and heights. The rate is inclusive of octrai, royality malkana toll tax, GST and all type of other taxes imposed by the Government
Providing and fixing 600X450 mm.beveled edge mirror of superior glass mounted on 6mm. thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers including entire carriage of material within all leads, lifts up to all floor level and heights. The rate is inclusive of octrai,royality malkana toll tax,GST and all type of other taxes imposed by the Government. (Exotia/Modiguard make)
Providing and fixing flexible (coil shaped) PVC waste pipe for wash basin 32 mm dia complete in all respects including entire carriage of material within all leads, lifts up to all floor level and heights. The rate is inclusive of octrai,royality malkana toll tax,GST and all type of other taxes imposed by the Government.
Providing and fixing vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings 550mmx400mm including entire carriage of material within all leads, lifts up to all floor level and heights. The rate is inclusive of octrai,royality malkana toll tax,GST and all type of other taxes imposed by the Government (Hindware/ Parryware/ Jaguar make)
Providing and fixing C.P. Brass waste for wash basin or sink 32mm dia including entire carriage of material within all lead & lifts.(Hindware /Nova/ESS ES make)
Providing and fixing CPVC ball valve with wheel:-Heavy duty complete in all respect including entire carriage of material within all lead & lifts.
20 mm dia
25 mm dia
Providing and fixing CPVC union (Where not included in the item) including entire carriage of material within all lead & lifts.
20 mm dia
25 mm dia
Providing and fxing vitreous china bowl pattern Large urinal including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp (waste) pipe to be measured and paid for seperatly) including entire carriage of material within all lead & lifts. Flat back Large type of size 610mm x 410mmx380mm including CP spreader for flushing with C.P. Connection ( Hindware) code60002/Jaguar/
Providing and fixing vitreous China pedestal for wash basin complete recessed at the back for the reception of pipes and fittings including entire carriage of material within all leads & lifts. (Hindware/ Parryware/ Jaguar make)
Providing & fixing CP brass toilet paper holder (Hindware contesa/ Jaquar Continental / C-Zar/Nova-Specturm make) including entire carriage of material within all leads & lifts.
Providing and fixing health faucet thumb operated with bracket and flexible pipe 15 mm complete in all respect including entire carriage of material within all lead & lifts. (Hindware /Jaguar ALD - 565 make)
Providing and fixing Grab bar 450 mm long Jaguar AHS- 1503 stainless steel complete in all respect including entire carriage of material within all lead & lifts.
Providing and fixing Division Plate for Urinals 600mm x 300. Vitreous China including entire carriage of material within all leads, lifts up to all floor level and heights. The rate is inclusive of octrai,royality malkana toll tax,GST and all type of other taxes imposed by the Government (Hindware/ Parryware/ Jaguar make)
CHANDER MOHAN RANA (BID ID -585360)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.23 MB
sbd.pdf
Tender Documents • 20.61 MB
BOQ_175702.xls
BOQ • 1.44 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .