REPAIR REPLACEMENT OF FLOOR PLASTER SUNKEN FLOOR FOR TOILET BATHROOM AND KITCHEN PLUMBING SANITARY WIRE GUAGE GLASS PANES ALUMINUM AND MISC REPAIR IN ZONE I UNDER AGE BR II AT GE WEST BAREILLY

Amount

Demolition of cement concrete (un-reinforced) including terrazo of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling floor, hearth or wall tiling/terrazo including cement mortar bedding and removing rubbish off the premises complete all as specified and directed.

M&L for glazed coloured ceramic tiles 300 x 200mm x 7mm thick in vertical wall surfaces set and jointed in neat cement slurry and pointed in white cement using pigment to match the shade of tiles complete all as specified and directed.

M & L for colour glazed ceremic coloured tiles in vertical surface 300 x 450 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick screed bed or bedding layer of cement mortar 1:4 cement and dismantling of wall tile including cement mortar bedding complete all as specified or as directed. all as spfd or as directed.

M & L for non- skid ceremic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling of tiles and screed bed or bedding layer of mortar 20mm thick in cement mortar 1:6 for laying floor finishes all as specified and directed.

All as above but as in vertical surfaces

M & L for vetrified ceramic Dark shade coloured tiles 10 mm thick (Square/rectangular) area of each tile but not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling of tiles and screed bed or bedding layer of mortar 20mm thick in cement mortar 1:4 for laying floor finishes all as specified and directed.

All as above but as in vertical surfaces

M & L for vetrified ceramic Dark shade coloured tiles 10 mm thick (Square/rectangular) area of each tile 1200x600x10mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling of tiles and screed bed or bedding layer of mortar 20mm thick in cement mortar 1:4 for laying floor finishes all as specified and directed.

Ditto but in vertical surfaces including 10 mm thick backing coat or bedding layer of cement mortar 1:4 cement and dismantling of wall tile including cement mortar bedding complete all as specified or as

Dismantling of stone slabs and tiles of any description or thickness in floors aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed.

S&F 16 to 18 mm thick granite stone slabs mirror polished of colour and shade as approved by GE, machine cut bedded & jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of granite stone fixed as in steps, jambs, pillars window cills, cooking platforms & the like etc complete all as specified and directed

Rounding to edges of stone slabs one edge , such as in steps , cooking platform , and other similar situations complete all as specified and directed

S&F 14 to 16 mm thick makrana white/dholpur marble stone slabs machine cut bedded & jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade fixed as in floors ,steps jams ,pillars ,window,cupboards selfs, cills cooking platforms & the like etc all as specified and and pointed in white or including cutting rubbing polishing completed coloured cement to match incl dismantling of tiles and screed bed or bedding layer of mortar 20mm thick in cement mortar 1:4 for laying floor finishes all as specified and directed. directed by Engr-in-Charge

M&L PCC 1:2:4 type B-0 (using 12.50 mm stone aggregate) as in, levelling course with to be finished even and fair without using extra cement on roof surface / chajja (thickness of concrete will be provided as per site requirement and as directed by engr-in-charge) complete all as specified and directed.

M&L for 15mm thick screeding on fair faces of concrete surfaces in CM 1:4 with water proofing compound @ 200ml per 50 Kg of cement complete all as specified and directed.(NOTE:- WPC shall be measured and paid separatly), finished even and smooth with steel trowel without using extra cement.

M&L PCC 1:2:4 type B-0 (using 12.50 mm stone aggregate) as in roof kerbs, coping, benching etc including weathering slightly rounded or chamfered angles and throating, incl demo of old concrte complete all as specified and directed.

Supply only liquid water proofing compound (Make :Dr fixit)

Supply & providing water proofing treatment with polymeric standard water proofing membrane, Aquaflex manufactured by M/s Bengal Bitumen, MULTIPLAS STANDARD, manufactured by STP TEXAS Ltd/Hyperplas manufactured by IWL Ltd having 10 years guarantee for water tightness all as specified and described as under:- (a) Preparation of RCC roof surface and applying one coat of polymeric modified bitumen 85/25 @ 1.2 Kg/Sqm over a coat of polymeric primer @ 0.30 Kg/Sqm including cleaning surface, all as per manufacturer's specification complete all as specified and directed. (b) Supply & providing water proofing treatment with polymeric proofing membrane of 3Kg/Sqm HYPERPLAS STANDARD/MULTIPLAS STANDARD consisting of 100micron HMHDPE film centre core including coating the surface with the bitumen 85/25 @ 1.20 Kg/Sqm and torch application of membrane with 10cm overlaps and longitudinal edges 15 cm at the ends as required thereof, complete all as specified & directed.

M&L Aluminium paint one coat on APP membrane complete all as specified and directed.

M&L 250 x 250 x 15-18 mm thick PCC tiles fixed with neat cement slurry and joint filled with sealing compound over and including 20 mm thick screed bed in cement 1:4 incl demo of old tiles and existing water proofing treatment complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection ,path,finished even and smooth without using extra cement complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation bed of manhole etc all as specified and directed.

M& L for 30x30cm providing precast cement concrete rubber moulded chequered coloured tiles 20 to 25 mm thick even finished on top of approved design and pattern complete all as specified and directed

M& L for providing precast cement concrete rubber moulded coloured interlocking tiles 60 mm thick with grey cement and pigment of approved design and pattern laid over a layer of 25 mm thick sand cushion including filling the joint with sand complete all as specified and directed

M&L for PCC Kerb stone outer coloured surface machine pressed factory made of size 300 mm long 100mm wide and 350mm deep in PCC 1:2:4 type B-0 using 12.5 mm grade stone aggregate, jointed in CM 1:4 complete all as specified and directed.

M&L for 40 mm thick cement concrete type B1, 1:2:4 (using 20mm graded stone aggregate) finishing sufaces even and smooth without using extra cement complete all as specified and directed

S&F rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position capacity 500 ltrs including dismantling of existing unserviceable water tank capacity exceeding 250 ltr and not exceeding 500 ltr complete all as specified in SSR Part I and directed

S&F rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position capacity 1000 ltrs including dismantling of existing unserviceable water tank capacity exceeding 500 ltr and not exceeding 1000 ltr complete all as specified in SSR Part I and directed

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, aches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles all as spd and directed

Brick work with fly ash bricks, straight or curved on plan 6m mean radious built in CM (1:6) etc as directed .

M&L rendering 15mm thick in CM 1:6 on brick or concrete surfaces and finished even and smooth w/o using extra cement including taking down existing defective cement plaster on brick or stone masonary complete all as specified and directed.

M&L for 15mm thick cement plaster on brick surfaces or concrete surfaces in CM (1:4) including finishing the surface even and fair and including taking down existing defective cement plaster on brick or stone masonary complete all as specified and directed.

M&L preparation of newly plastered surfaces and applying two coats of cement base paint on walls all as specified & directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed

S & F GI wire mesh 0.48 mm nominal dia of wire and average width of aperature 1.4mm and fixed with tinned takes or galvanised Wire staples complete all as specified and directed

S & F in repairs GI wire mesh 0.48 mm nominal dia of wire and average width of aperature 1.4mm and fixed with tinned takes or galvanised Wire staples complete all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed

S&F sheet glass 3 mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed.

S&F 15mm bore tubes medium grade galvanised iron with all new fitting and fixed to walls and ceiling or laid in floors including taking down old unserviceable steel tubing complete all as specified and directed.

S&F 20 mm bore tubes medium grade galvanised iron with all new fitting and fixed to walls and ceiling or laid in floors including taking down old unserviceable steel tubing complete all as specified and directed.

S&F in repairs Vitreous china wash down water closet (pedestal pattern) white complete, including connection to drain pipe and to flushing pipe antisyphonage pipe etc complete all as specified and directed

S&F in repairs plastic water closet white seat cover closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed

S & F in repairs PVC low level flushing cistern of capacity 10 ltrs with inlet, ball valve, float and handle including brackets and flush pipe of PVC 32mm dia complete all as specified and directed.

S&F in repairs Vitreous china wash basin white flat back 550mm x 400mm excluding tap, waste, chain & plug but including brackets complete all as specified and directed

S&F in repairs centre hole basin mixture 15 mm dia chromium plated complete all as specified and directed.

S&F in repairs chromium plated fancy type stop vlave /angle valves with cup cast copper alloy screwed down high pressure, screwed both ends for iron pipes or for unions for 15 mm bore pipe complete all as specified and directed.

S&F in repairs chromium plated fancy type long body bib taps with cast copper alloy screwed down, screwed for iron pipe or for brass ferrule for 15 mm bore pipe complete all as specified and directed.

S&F in repairs 100 mm dia shower rose of Chromium plated brass for fixing 15 mm pipe with shower arm size 195 mm long with bend of 45 degree with flange complete all as specified and directed.

S&F in repairs chromium plated wall mixture with connection for shower arragement complete all as specified and directed.

S&F in repairs hand shower (health faucet) 1 mtr PVC tube with wall hook complete for ETWC complete all as specified and directed.

S&F in repairs PVC connections 15mm dia & 450mm long with PTMT nuts complete all as specified and directed.

S&F in repairs grating doom 100mm dia of PTMT (minimum weight 25gms) complete all as specified and directed.

S&F in repairs plate rack made out of 1 mm thick stainless steel sheet of size 75 cm x 90 cm x 25 cm with all internal fittings (as per sample) complete all as specified and directed

Demolition/Dismantling of breaking up drain pipes( AC or reinforced concrete )set in cement mortar for 100mm internal dia (and less) of pipes.

S&F PVC (SWR) pipes 110mm dia, single socketed in any length fixed to walls & floor ,jointed with solvent cement.

All as above but 75mm dia pipe

Taking down chowkhat or frame with shutter (without taking off shutter from the frame)exc 1.5 sqm and n exc 4.00 swm incl removing from the premises complete all as spd and directed

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n. exc 1.5 sqm incl removing from the premises complete all as spd and directed

Taking down shutter of any description n/exc 1 sqm each incl removing from the premises complete all as spd and directed

Taking down shutter of any description exc 1 sqm and n/exc 2 sqm each incl removing from the premises complete all as spd and directed

M&L for 2nd class hard wood plain solid straight chowkhats and frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints and any numbers of rebate all as spd and directed

Cutting holes into bricks walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1as required, depth of hold fast exceeding half brick and not exceeding one brick all as spd and directed

S&F Mild steel bands, straps, supports or stay, for rain water, ventilating pipes including bolts if required, hooks (stay) heavy for large gates hook and pintle large hasps and staple, chains hand made sliding bolts clamps, hold fasts wall ties etc etc hooks for hanging fans plain angle cleats for securing purlins to wood truss or rafter, knee piece inserts, two way and three way straps, plate washer and similar small articles confirming to Fe-290 Gde - E-165 all as spd and directed

S & F factory made solid PVC door frame size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per spacification and drawing all as spd and directed

S & F factory made solid pannel PVC door shutter 30mm thick style consisting of frame made out of MS tube, for top & bottom rail, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm wide struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, bottom rail & lock rail on either side & as gap insert for top rail and bottom rail. panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement as per spacification and drawingshown in SSR Pt -ll (rate ) - 2010.

S&F 35mm thick 2nd class hard wood glazed and skelton shutter open rebated and prepare to receive glass, gauge etc for window/ventilators divided into squares with plain chamfered mitred & rebated sash bars edges of framing plain, chamfered rounded fitted with cut and mitred beads for securing glass etc sizes of member as spd in SSR Part I sec 8 clause 8.24 (b) all as spd and directed

S&F factory made 32 mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed.

S&F factory made 25mm thick flush shutter solid core construction with block board core and plywood face panels ,cupboards ,shelves , drawers , pelmet boxes etc all as spd and directed.

S&F Factory made steel window /ventilator side hung shutters including box type hinges with Z section steel handle, 2 Nos 100mm MS tower bolt on each shutter and MS CP hook and eye stay, complete with glazing bars dovetailed or welded all as spd and directed.

Ditto as above but with out glazing bar and complete all as spd and directed .

S&F mild steel framed work such as grills grating etc with ends of bars shouldered and/or riveted or forged into spikes framed guard bars, barrel iron doors ladders framed balusters walk ways railing frame work of water tanks and similar work confirming to Fe -290 Gde-E-165 all as spd and directed .

S&F factory made PVC Cupboard frame of the size 75mm x 40mm with a wall thickness of 5mm, made out of extruded 5mm thick plain/prelam PVC sheet of density 600 kg/cbm, having bottom width of 50mm and thickness of 10mm. All four frame lengths reinforced with 15 mm x 15mm M. S. square tubes of 19 gauge thickness throughout the frame and mitre cut at two corners adjointed with 2 nos. of 15mm long brackets 0f 10mm x10mm M S square tubes. The door frame shall be fixed to the wall using 8/100 long M S screws through the frame by using PVC fasteners. A minimum of 4 nos. of screws to be provided for each vertical member and minimum of 2nos. of screws to be provided horizontal member etc. complete as per direction of Engr-in-Charge, manufacturer's specification and drawing.

S&F factory made PVC cupboard flush type shutter of 30mm thick consisting of frame made out M S tubes of 19 gauge thickness and size 19mm x 19mm for stiles and rails. The inside panel shall consist of 20 mm thick multichamber hollow PVC section of 1mm wall thickness, bonded using solvent cement/ cynoacrylate adhesive with 5mm thick plain/prelam PVC sheet, on both side of inside panel incliding necessary items to fix the shuter to frame such as 100mm stailess steel hinges, 100 mm long handles made of anodised aluminium and magnetic ball catch for each pair of shutter.All four edges of the panel to be sealed with lipping of 10mm thick and 20mm wide PVC sheet baton (made by sticking 2nos. PVC foam sheet of 5mm thickness using PVC solvent cement adhesive). complete as per direction of Engr-in-Charge.

S&F 16 to 18 mm th green marble stone slabs machine cut bedded & jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade fixed as in steps jams ,pillars ,window,cupboards selfs, cills cooking platforms & the like etc all as specified and directed by Engr-in-Charge

S&F PVC sheet wall panelling of thickness 5mm consisting panels of desired size stuck on inner frame work of 35mm wide strips of 5mm thick PVC sheet. The PVC strips shall be fixed to the wall using 65mm long MS Screws through the grrove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A strip of 5mm thick PVC sheet of width 75mm featherd at edges shall be stuck at the places where two panels are joined, using solvent cement Complete as per direction of Engr-in-Charge.( Note: Material will be of Rajshree/ Sintex/ Cactus and will be fabricated through authorised fabricators of the approved firm)

S&F in repairs 300mm mild steel ordinary rat tail rod pattern springs including roller & roller plate complete all as spd and directed

S&f in repair floor door stopper of aluminium alloy body and tounge, anodised with hard drawn steel spring, 140mm long complete all as spd and directed.

S&F in repairs cast iron body door closer hydrocally regulated designation No. 1 universal type for door shutters up to 700 mm in width and of weight not more than 35Kg and fixed all as spd and directed

S&F 100mm size butt hinges,satinless Steel complete all as specified and directed.

S&F 100mm size butt hinges, medium weight cold rolled mild steel complete all as specified and directed.

S&F 75mm size butt hinges, medium weight cold rolled mild steel complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 100mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 150mm size extruded aluminium alloy handle fabricated type anodised complete all as specified and directed.

S&F in repairs 100mm size extruded aluminium alloy handle fabricated type anodised complete all as specified and directed .

S&F in repair 300mm size aluminium alloy anodised sliding door bolt with hasp & staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolt and sliding bolt of extruded section or cast alluminium alloy complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description and applying two coat of synthetic enamel paintover one coat of pink primer complete all as spd and directed by Engr-in-Charge

M&L for painting to steel surface exc 10 cm width or girth with two coats of synethic enamel paint over a coat of red oxide primer including preparation of newly or previously untreated surface all as spd and directed

Dismantling of asbestos cement (corrugated, semicorrugated, etc) sheets in roof coverings

Dismantling timber scantling 40 Sqcm and over in sectionand in any position in unframed work.

S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc

Dismantling wall and ceiling board or insulation boards/ slabs/ blankets, any thickness, including cover fillets.

M&L for 4mm thick E-Board classic (everest or equivalent) tiles for insulation and accoustic purpose 60cm x 60cm with and including powder coated galvanised iron snap grid with 32x25x1.5mm thick Tee section and 32x25x1.5mm thick algle section with all hanging/supporting arrangements as in false ceiling and making good disturbed surface complete all as specified and directed.complete all as specified and directed.

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/clading to wall, fixed with self tapping screws as specified.

S&F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in ridges, roof covering/clading to wall, fixed with self tapping screws as specified.

M&L for 6mm thick asbestos cement, corrugated or semi corrugated sheets in roofs, walls etc fixed with L-type or J-type or cranked hook bolts

Ditto but fixing only.

S&Fin repair 6mm thick asbestos cement two piece serrated ridge for corrugated or semi corrugated sheets fixed with L-type or J- Type or cranked hooks bolts all as spd and directed

M&L PCC 1:2:4 type B-0 (using 12.50 mm stone aggregate) as in, levelling course with to be finished even and fair without using extra cement on roof surface / chajja (thickness of concrete will be provided as per site requirement and as directed by engr-in-charge) complete all as specified and directed.

Taking down hood covers of rolling shutters of area not exceeding 6 sqm loose brackets plates or guide properly greasing helical spring,shafts, and guide, channel for proper functioning of rolling shutter of any size and refixing covers in position after repairs complete all as specified and directed.

Taking down aluminiun door shutters ans refixing after necessary repairs, greesing etc to made the shutters functional, including all minor items like screw, rivet, washers, aluminium beads complete all as specified and directed.

S&F 1.5 mm thick aluminium power coated(colour) section as in window,ventilator,glazed with aluminium shutter(medium weght) not less than 0.95kg/sqm of suitable size, one or more rebate,cut to jointed together with cadmium plated steel screws including rubber bending or gasket for aluminium sections for fixing glass/Xpm jalli and necessary fittingd,screws, plugs for fixing screws, including partion board,glass and necessary fitting etc complete all as specified and directed by EIC (Aluminium section shall be of make Jindal/Hindalco/Indalco)

S & F Sheet glass ordinary quality 5.5 mm thick and glazing with oil putty in squares n exc 0.5 Sqm in each pane.

M&L for 6mm thick bakelite sheet prelaminated both side with decorative choice lamination frame work complete all as specified and directed.

S&F in repairs Vitreous china wash basin pedestal type white flat back 635mm x 430mmx 190mm excluding tap, waste, chain & plug but including brackets complete all as specified and directed

S&F in repairs PVC toilet cabinet with mirror of size 20"X16" of selecred quality complete as specified and directed .

S & F CP cover glass shelf with bracket jaquar cat part No 1173/ equivalent complete all specified and directed.

S & F CP toilet paper holder with flap Jaquar cat part No AKP-35741P/ equivalent complete all as specified and directed.

S & F single piece WC size 690x345x850 trap distance vitreous china ware coloured EWC pedestal patern alongwith and incl premoulded 10 ltrs vitrreous china ware cistern complete all as specified and directed Make : Jaquar cat part No SLS-WHT-0208/equivalent.

S & F CP single towel rail 60 cm long incl fittings complete all as specified and directed Make : Jaquar cat noAKP- 35711Por equivalent.

S & F CP towel ring square Cat No AKP-35721P of Jaguar or equivalent complete all as specified and directed.

S & F 450 mm long braided hoses with nut & rubber washer suitable for basin mixers Make Jaquar cat no 8038.

S & F CP towel rack size 24" Cat No 7781B of Jaquar or equivalent complete all as specified and directed.

S&F 32 mm dia curtain rod stainless steel fancy (CP) with fixing wooden brackets, stops and rollers all as specified and directed.

S & F fancy type viterous china counter top, wash hand basin oval shaped colours of size130 x 420 x420 mm with granite inserted in 25 mm thick mounted granite stone slab platform by cutting on oval shaped etc incl CP bottle trap completed all as specified and ditected. (Granite cuttings shall be measured and paind separately Make Jaquar ARS- WHT-5038,Cers, Parryware

S & F CP pillar cock central hole basin mixer without popup waste system with 450mm long braided hoses hot and cold water screwed down for iron pipe and fixed bore of pipe 15 mm Make- Jaguar cat no 23167B/Ess Ess

S & F 6 mm thick looking mirror fixed on 12 mm thick marine plywood with power coated aluminium frame alround the mirror incl mounted on wall size 1.5 x 60 complete all as specified and directed.

M&L for POP false ceilig includng GI framing, main member C shaped spacing not exc 1m c/c having weight 300 to 350 gm per rm and cross member U shaped spacing exc 500 mm c/c having weight 250 to 300 gm/RM and C section fixed on parameter wall with screws and rawl plug including hanging arrateement to RCC slab wth L shape member exc 105 m (wieght not less tha 120 gm/RM) and wire mesh of dia 0.50 to 0.56 mm weight not less than 350 gm/sqm fixed with steel screws of GI framing and applying two coat of luxury emulsion (Royal) complete all as specified and directed.

M&L for plaster of paris fancy moulding pattern in corners of ceiling in triangula shape of size 75 mm x 75 mm including finished upto the required mark complete all as specified and directed.

Supply only floor springs suitable for aluminium doors, any type and size, complete all as specified and directed.

Notes:-

N N ENTERPRISES

M/S Alam Construction Co

SIDDHIDATI CONSTRUCTION

M/S Harshri Nath Enterprises

novell engineers

RIYASAT ALI KHAN