MISC REPAIR TO PLUMBING, JOINERY, TILING, BRICKWORK, PLASTERING, STONE WORK, DRAIN, SECURITY WALLS, SECURITY GATES, SECURITY FENCING, CULVERT, KERB STONES, INTERLOCKING TILES, RCC CHAJJA, FINS AND FASCIA AND PERIODICAL SERVICES TO RESIDENTIAL AREA AT

Amount

S&F in repair PTMT ball valve high pressure with polyethylene float ball and fly nut complete screwed for iron pipe and fixed 20mm bore complete all as specified and as directed.

S&F in repair PTMT ball valve high pressure with polyethylene float ball and fly nut complete screwed for iron pipe and fixed 25mm bore complete all as specified and as directed.

S&F in repair rotational moulded polyethylene water storage tanks, triple layers 750 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I complete all as specified and as directed.

All as per ser item No 3.00 above but 1000 ltrs capacity complete all as specified and as directed.

Disconnecting existing tanks, setting aside (or lowering if required) for cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc of capacity exc. 500 ltrs but n. exc. 1000 ltrs. and hoisted, if required reconnecting and re-fixing in position complete all as specified and directed.

All as per Srl No. 5.00 above but capacity of tank exc. 1000 ltrs but n. exc. 2000 ltrs.

S&F in repair 25mm nipple suitable for HDPE water tanks complete all as specified and directed.

S&F in repair 20mm stop valve of PTMT any colour high pressure screwed for iron pipe complete all as specified and directed.

S&F in repair 10 litres capacity, PVC valveless with syphon action type flushing cistern low level white with inlet, ball valve float, incl bracket, flush pipe fixed complete all as specified and directed.

S&F in repair 10 ltrs capacity vitreous China valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repair 110mm dia outlet PVC (SWR) floor trap, plain with grating including jointing with solvent, complete all as specified and directed.

S&F in repair 15mm bore Unplasticized PVC pipes of pressure rating 10 Kgf /Sqcm complete all as specified and directed.

S&F in repair 20mm bore Unplasticized PVC pipes of pressure rating 10 Kgf /Sqcm complete all as specified and directed.

S&F in repair 25mm bore Unplasticized PVC pipes of pressure rating 10 Kgf /Sqcm complete all as specified and directed.

S&F in repair 15mm dia stop valves, fancy type chromium plated with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for pipe or for unions complete all as specified and directed.

S&F in repair vitreous china squatting pan, Orissa pattern size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) complete including provn of lime concrete bedding, complete all as specified and as directed.

S&F in repair vitreous china water closet Pedestal pattern white complete all as specified and directed.

S&F in repairs for 250mm long sliding door bolts Aluminium alloys with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts complete all as specified.

S&F in repairs butt hinges 100mm long medium weight cold rolled mild steel complete all as specified and as directed.

S&F in repairs for continuous (Piano) hinges mild steel, bright finish or electro galvanised complete width of flaps 40mm complete all as specified and as directed.

S&F in repairs 125mm extruded Aluminium alloys handles, fabricated type, anodised complete all as specified and directed.

S&F in repairs brass 2 levers cupboards lock of size 50mm Grade I complete all as specified and directed.

S&F in repairs waste fitting CP Brass 40mm dia for sink, basins complete all as specified and as directed.

S&F in repair PVC connection 450mm long with PTMT nuts complete all as specified and as directed.

S&F in repairs 32mm bore unplasticed PVC pipes of pressure rating 6Kgf/sqcm complete all as specified and directed.

S&F in repairs seat covers any colour for pedestal pan with hinges complete all as specified and as directed.

S&F in repairs brass chromium plated tubular towel rails 20mm dia, D type 60 cm long complete all as specified and as directed.

S&F in repairs stainless steel brackets for curtain rod/ towel rails complete all as specified and as directed.

S&F in repairs 140mm floor door stoppers of aluminium alloy body and tounge, anodised with hard drawn steel springs, fixed in floors complete all as specified and as directed.

S&F in repairs Plywood 4mm thick, grade BWP, type BB fixed with screws to timber framework complete all as specified and directed.

S&F in repairs block board 18-19mm thick fixed to timber framework / shelves complete all as specified and directed.

S&F ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed in wooden cabinets complete all as specified and directed.

S&F in repair 50 mm dia brass polished, cupboard knobs fixed with nut, screw and washers complete all as specified and as directed.

S&F in repair 100 mm hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate complete all as specified and directed.

S&F in repairs 20mm dia MS CP curtain rods with fixing brackets, stops, etc complete all as specified and as directed.

S&F in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to wall complete all as specified and as directed.

S&F PVC (SWR) bends any radius 110mm dia complete all as specified and as directed.

S&F in repairs stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 110mm dia pipe complete all as specified and as directed.

All as per Srl No 38.00 above but 150mm dia.

M&L, Brick work with subclass 'B' bricks, in one brick thick walling, straight or curved on plan exc. 6M mean radius built in cement mortar (1:6) complete all as specified and as directed.

All as per item No 40.00 but except bricks.

M&L for plastering 15mm thick on fair faces of brick work in cement mortar (1:6) finish even and smooth without using extra cement all as specified and as directed.

M&L for plastering 10mm thick on fair faces of brick work in cement mortar (1:4) finish even and smooth without using extra cement complete all as specified and as directed.

M&L for 5mm thick rendering in cement mortar 1:3 on fair faces of ceiling such as balconies, chajjas, etc or concrete surfaces complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paaint over a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of chalk whiting of walls complete all as specified and as directed.

S&F in repairs 4mm thick sheet glass any thickness and glazing with oil putty / wooden beads in square n.exc. 0.5 Sqm in each pane complete including hacking out old broken glass and cutting of new glass in required size complete all as specified and as directed.

All as per ser item No 45.00 above but exc. 0.5 Sqm in each pane.

M&L for 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc fixed with L-type or J-type or cranked hook bolts in lieu of screw complete all as specified and directed.

S&F in repairs wash hand basins vitreous china flat back 550x400mm size white, first quality, with and including CP waste grating 32mm size, PVC waste pipe 25mm bore heavy duty, chain and plug and porcelain stopper , brackets of MS angle 35x35x6mm size complete all as specified and directed.

S&F in repair sinks with drainage board made of stainlessness steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F pressed steel frames of size 100x60mm for door with one or more rebates including necessary fixing lugs hinges, lock strike plate, etc complete complete all as specified and as directed.

S&F pressed steel frames of size 125x60mm for door with one or more rebates including necessary fixing lugs hinges, lock strike plate, etc complete all as specified and as directed.

M&L for PCC 1:3:6, type C1 (20mm graded stone aggregate) as in PCC bed block complete all as specified and as directed.

S&F 35mm thick flush shutter solid core construction with block board and plywood face panels, commercial type on both side complete all as specified and as directed.

S&F 35 mm thick 2nd class hard wood factory made glazed and Skelton shutters, open rebated and prepared to receive glass gauze (without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze , etc size of shutters as specified in SSR part I, section 8, clause 8.20(a) complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint on wooden surfaces over a coat of pink primer complete all as specified and as directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specification and drawing in SSR complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consulting of frame MS tubes for top or bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strips of 20mm with stick in side with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on other side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded sealed to be sides and rails with suitable PVC sheet beading and joined together with solvent cement as per specification and drawing in SSR complete all as specified and as directed.

S&F 100 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S&F 100mm butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F 250mm size aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.

S&F 150mm size aluminium handles, cast type anodised complete all as specified and as directed.

M&L kota stone slab 20-25 mm thick as in flooring over 20 mm thick cement screed base in cement 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L kota stone slab 20-25 mm thick in stair case riser/tread/skirting dado etc laid over & including 10mm thick cement screed in CM 1:4 and jointed with grey cement and polishing complete all as specified and as directed.

M&L 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs pillars, window, cill cooking platforms, shelves and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

M&L for 1st quality non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc. 0.06 sqm but n.exc. 0.11 sqm, in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles and laid over & including 20mm thick screed bed or bedding layer of CM (1:6) complete all as specified and as directed.

M&L glazed ceramic coloured tiles of 1st quality 300x200x6-7mm in vertical surfaces i.e skirting, dado etc set and jointed in neat cement slurry and pointed in coloured cement to match laid over & including 10mm thick plastering in CM (1:4) complete all as specified and as directed.

M&L for fully vitrified tiles double charged n.exc. 0.36 sqm 9 to 10 mm thick polished, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 20mm thick cement screed bed in CM (1:6) complete all as specified and directed.

Demolition of stone slab as in floor/dado of any description and in any thickness and removing the demolished material out side MoD land complete all as specified and as directed.

Demolition of brickwork or stone/bolder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings dressed stonework and precast concrete articles complete all as specified and as directed.

Taking down cement plaster on brick or stone wall etc including racking joints, hacking for key, scrubbing down with water etc in any position complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame area exc. 1.50 sqm but n.exc. 4 sqm each including making holes as required for receiving PCC and to match with the existing surface complete all as specified and as directed.

All as per Srl item No 74.00 above but n. exc. 1.50 Sqm.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

S&F in repairs Toilet paper Holder CP Brass complete all as specified and as directed.

S&F in repairs angle/stop valve CP brass ,15 mm dia, fancy type, chromium plated screwed for iron pipe and fixed in repairs complete all as specified and as directed.

S&F in repairs brass CP bottle trap with casted body 32mm with 190mm and 125mm long connecting pipes and wall flange complete all as specified and as directed.

S&F in repair chromium plated brass bib taps short body with wall flange, fancy type 15mm size screwed for iron pipe, not less than 0.575 Kg in weight complete all as specified and as directed.

S&F in repairs chromium plated brass single lever basin mixer without pop up waste with 450mm long braided hoses size 15mm size screwed for iron pipe, complete all as specified and as directed.

S&F in repairs chromium plated brass bib taps long body, fancy type 15mm size screwed for pipe, not less than 0.575 Kg in weight complete all as specified and as directed.

S&F in repairs flush pipe PVC for low level flushing cistern including jointing to WC complete all as specified and as directed.

S&F in repairs CP grating 125 mm dia with or without hole for waste pipe fixed on floor / nahani trap fixed with cement mortar complete all as directed.

S&F in repair 250ml capacity stainless steel wall mounted glass liquid soap dispenser (having anti-rust and corrosion resistant properties) complete all as specified and as directed.

S&F in repairs 150mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to wall complete all as specified and as directed.

S&F PVC (SWR) bends any radius 150mm dia complete all as specified and as directed.

S&F in repair hand shower (health faucet)(ABS body) with 8mm dia, 1.2 meter long flexible tube & wall hook fixed to 15mm bore pipe complete all as specified and as directed.

S&F in repair chromium plated shower rose with or without swivel joints, any size, including arm & fixing or union complete all as specified and as directed.

M&L for grinding polishing the terrazzo tile/kota stone flooring/marble stone flooring and wall complete including wax polishing all as specified. Note: Standard size machine shall be used for grinding floor and hand grinding machine shall be used for vertical surface i.e. dado/skirting etc complete all as specified and as directed.

M&L for renewing terrazzo tiles in patches, area n exc 2 Sqm including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new tiles complete all specified and directed.

M&L for renewing glazed ceramic tiles in patches, area n exc 2 Sqm including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new tiles complete all specified and directed.

Demolition of cement concrete in ground floors and pavings etc not exc 15 cm thick above or below ground level complete all as specified and directed.

M&L 40mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in floors etc finishing even and smooth without using extra cement complete all as specified and directed.

M&L for PCC type B1 1:2:4 (using 20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers apex stone, bed plates, including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L for Stone kerb of roughly squared stones dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 6mm for top and exposed surfaces of sides and 20mm for the rest of surfaces jointed in cement mortar1:6 and struck flush complete all as specified and directed.

M&L for racking out old joints of roof tiles including flush pointing in cement mortar (1:3) upto depth of 20 mm complete including cutting removing vegetation complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for machine pressed precast concrete interlocking coloured paver block any shape and size conforming to IS-15658-2006 of 80mm thickness M-40 Gde fixed with grey cement and no pigment complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

M&L for structural steel Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

S&F for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F in repairs galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth and applying 2 coats of synthetic enamel paint over a coat of red oxide primer, not otherwise described complete all as specified and directed.

M&L for raised pointing to random or polygonal rubble, uncoursed or brought upto courses in CM 1:4 complete all as specified and directed.

M&L for Guniting to RCC Column, beam, slab etc by removing/taking down concrete or plaster, cleaning surface and fixing wire mesh 2-3mm dia, applying epoxy paint 40-50 micron thick AMATEC, derusting reinforcement by grit blasting agent on old concrete surfaces both SIKADUR-32@ 2% by weight of poly create and providing gunniting 30 mm thick in atches/straight in CM 1:2 at a min pressure 2.5 kg/cm and making surface even and smooth by rendering 20mm thick in CM 1:3 over gunniting including padding (scaffolding) and shuttering complete all as specified and directed.

Demolition of cement concrete (reinforced) in ground floors and pavings etc not exc 15 cm thick above or below ground level complete all as specified and directed.

M&L for type B1, 1:2:4 (20mm graded stone aggregate) Nominal Mix for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. Note-Reinforcement shall be measured and paid separately.

M&L for TMT bars of 10mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for 100mm thick cement concrete type D2 1:4:8 (40mm graded stone aggregate) as in flooring complete all as specified and as directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs landings and similar works (horizontal or sloping) complete all as specified and as directed.

S&F cement concrete paving tiles with polish & coatings 20mm thick set jointed and pointed in neat cement slurry using pigmnets laid over 20 mm thick screed bed in CM 1:6 all as specified and directed.

S&F in repair factory made precast heavy duty drain/mahole covers including MS frame of 25x3mm and including reinforcement (the volume of steel fibres shall not be less than 0.5 percent of concrete volume) as per IS 12592:2002 with specified thickness complete all as specified and directed.

M&L for cement concrete type C-2 1:4:8 (40mm graded stone aggregate) in surface channels and drains complete all as specified and directed.

M&L for cement concrete type C-2 1:3:6 (40mm graded stone aggregate) in surface channels and drains complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings including taking down plaster complete all as specified. Note: Payment for providing grooves shall be made separately.

M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications complete all as specified and directed.

Removing Debris/ demolished materials to a distance exc 1.5 Km but n exc 5 KM outside MoD Land complete all as specified and directed.

M&L for preparation of old decorated surfaces including brooming down or steel wire brushing, scrabing down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots complete and applying one coat of white wash on walls all as specified and as directed.

All as per item No. 122.00 above but one coat of white wash on ceiling.

M&L for applying one coat of oil emulsion distemper on walls including preparation of old decorated surfaces shall include brooming down or steel wire brushing, scrabing down smoke soot, moulds, moss and efforescent salts and trading oil and greasy spots complete all as specified and as directed.

All as per item No 124.00 above but two coats of oil emulsion distemper on walls

All as per item No 124.00 above but one coats of oil emulsion distemper on ceiling

Complete removal of existing treatment from walls, fins, chajja etc shall include brooming down or steel wire brushing, scrabing down smoke soot, moulds, moss and efforescent salts and trading oil and greasy spots applying 1.5mm thick wall care putty on wall surfaces and applying 2 coats of oil emulsion distemper complete all as specified and as directed.

M&L for applying one coat of synthetic enamel paint over old painted wooden surfaces of any description over 10cm width or girth including preparation of surfaces complete all as specified and as directed.

M&L for applying one coat of synthetic enamel paint over old painted steel surfaces of any description over 10cm width or girth including preparation of surfaces complete all as specified and as directed.

M&L for preparation of old painted concrete surface (as a kerb stone) and apply one coat of synthetic enamel (ordinary tint) of any description over 10cm girth and width, not otherwise described.

-BLANK-

Complete removal of existing treatment from walls, fins, chajja etc shall include brooming down or steel wire brushing, scrabing down smoke soot, moulds, moss and efforescent salts and trading oil and greasy spots applying 3mm thick wall care putty on wall surfaces & two coats of acrylic exterior emulsion (weather proof) paint complete all as specified and directed. Note:- (a) Above work shall be executed in bldgs of height G+7. Rates for necessary scaffolding, tools, plants and safety equipments for workers must be included. Nothing extra on this account is payable for above work.

Flint India

ASHISH GARG AND COMPANY

V.V CONSTRUCTIONS

LR Mendiratta and Sons