81293/E8

Amount

M & L for plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundation filling & mass concreting etc as specified and directed by Engineer in charge.

Returning filling in for soft /loose soil including spreading, levelling watering & well ramming in layers nexc. 25 Cm thick in each layers complete all as specified and directed.

Removing excavated material (soil) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified & directed.

Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed complete all as specified & directed.

M & L for providing reinforced cement concrete M-25 (Design Mix), using 20 mm graded crushed stone aggregate as in foundation including rafts, footing, foundation beams, plinth beams, base of columns and the like complete all as specified and directed.

M & L for providing reinforced cement concrete M-25 (Design Mix), using 20 mm graded crushed stone aggregate, as in columns, pillars, piers, posts, struts and the like complete all as specified and directed.

M & L for providing reinforced cement concrete M-25 (Design Mix), using 20 mm graded crushed stone aggregate, as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, shelves and the like complete all as specified and directed.

M & L for providing reinforced cement concrete M-25 (Design Mix), using 20 mm graded crushed stone aggregate, as in beams, cantilevers, bressummers, lintels over 1.50 m span and the like complete all as specified and directed.

M & L for providing reinforced cement concrete M-25 (Design Mix), using 20 mm graded crushed stone aggregate, as in chajjas and the like complete all as specified and directed.

M & L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in fair finished surface of concrete complete all as specified and directed.

M & L for form work to edges of concrete flats, treads, breaks in floor, window cills, concrete railing, opening in concrete wall, sides of RCC slab, RCC / PCC bends in walls or similar work thickness exc. 10 cm and not exc. 20 cm in fair finished surfaces complete all as specified and directed.

M & L for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc. 200 mm thick horizontal or slopping in fair finished surface of concrete complete all as specified and directed.

M & L for providing cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed.

M & L for form work to chullah hoods, chajjas, troughs and similar items including edges in fair finished surface of concrete complete all as specified and directed.

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth , for foundation, etc or for shafts, wells, cesspits, manholes, pier holes,etc. n exc 10sqm on plan and n exc 1.5m in depth and getting out in soft/disintegrated soil complete all as specified and directed.

Excavation in trenches n exc 1.5m wide n exc 1.5m deep and getting out in soft /loose complete all as specified and directed.

M & L for 20 mm thick screed in cement mortar 1:6 as in sub base of floor complete all as specified and directed.

M & L for 10 mm thick screed in cement mortar 1:4 as in sub base of floor complete all as specified and directed.

S & F mild steel framed work such as grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe – 290 Grade – E 165 complete all as specified and directed.

M & L for 15 mm thick cement plaster in C M 1:3 with using WPC as in screed bed of roof slab complete all as specified and directed. Note : WPC shall be measured and paid seperately under respective item.

M & L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg/Sqm including cleaning surfaces complete all as specified and directed.

M & L for applying one coat of hot blown bituminous primer @ 0.40 Kg Per Sqm on plastered surfaces complete all as specified and directed.

M & L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed.

M & L for Cement concrete tiles 20cm x 20cm x 20mm thick, m a c h i n e pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished with grey cement and no pigment inlcuding 20 mm thck screed bed in CM 1:4 complete all as specified and directed.

M & L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified.

M & L for brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified.

M & L for brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified.

M & L for 40 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in damp proof course to horizontal or vertical surfaces including necessary form work and mixing of water proofing compound as per manufacturer’s instructions complete all as specified and directed. NOTE: - WATER PROOFING COMPOUND WILL BE MEASURED AND PAID SEPARATELY.

M & L for one coat of blown bituminous of grade 85/25 @ 1.50 Kg/Sqm over DPC complete all as szpecified and directed.

M & L for polythene film, 50 micron laid on PCC surface in DPC complete all as specified and directed.

M & L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment, in floors complete all as specified and directed.

M & L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment, on vertical surface in skirting, dados and riser of steps, over 10 mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

M & L for hardcore of gauge of broken boulders n exc 63 mm deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface as complete all as specified and directed.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/disintegrated rock complete all as specified and directed.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in hard /dense soil complete all as specified and directed.

M & L for 10 mm thick rendering in cement mortar (1:4) on brick surface and finising plastered surface fair and even, complete all as specified and directed.

M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces with cement mortar 1:6 finished even and fair complete all as specified and directed.

M & L for 15 mm thick rendering in CM 1:4 on external surfaces other than fair faces of brick work or concrete surfaces with WPC as per manufacturers instructions complete all as specified and directed.

M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces with cement mortar 1:4 finished even and fair complete all as specified and directed.

M & L for 5 mm thick rendering on concrete surfaces of ceiling in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and directed.

Supply only WPC complete all as specified and directed.

M & L for preparation of new plastered or previously untreated surfaces of walls and applying two coats of oil bound distemper over a coat of primer and one coat of Birla white putty complete all as specified and directed.

M & L for preparing newly plastered or previously untreated wall surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

M & L for preparation of newly plastered or un-plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M & L for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified an directed.

M & L for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed.

M & L for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed.

M & L for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings n.exc 15cm thickness(below or above GL) complete all as specified and directed.

Demolition of brick work or stone/boulder masonary,built in cement mortar including all quions,arches,pillars etc complete all as specified and directed.

Taking down cement or cement lime plaster from brick or stone walls etc. including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed.

Dismantling of wrought iron or mild steel work any description and fixed in any position complete all as specified and directed.

Dismantling of fencing wire mesh or barbed wire fencing, any type complete all as specified and directed.

Fixing only chain link fencing incuding line wires any mesh size & type to any type of standards, rais, straining bolts etc. including provision of binding wire complete all as specified and directed.

Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed.

S & F in repair galvanised concertina coil 610 mm dia asin fencing on the top of angle iron including GI plain wire 3 mm dia for holding coil complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed.

M & L for plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in foundation filling &mass concreting etc as specified and directed by Engineer in charge.

S & F for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed

S & F for pre-painted Trapezoidal profile galvalume or Zincalume profiled coloured coated steel sheet 0.60mm total thickness (with coting and painting) as in roof covering/cladding, fixed with self tapping screws (make Hilti/Fischer), neoprene and EPDM washers class 3 of AS-3566(5.5-14X5 for crest and 5.5-14X25 for valley fixed) with 150mm end lap and one corrogation side lap whereever required penetrations and lap in sheet shall be sealed by using proper sealant profile/HDPE fillers shall be provided whereever required to close voids between sheets and fastners etc. as in roof covering/ cladding in straight or curved surface in any height complete all as specified and directed. Note : 1. The colour of sheet for bldg shall be approved by GE. 2. Sheeting shall be fixed of any height. Make : Tata Bluescope/ JSW Steel /Llyod Insulation/Everest Industries

S & F Pre- painted factory made profiled galvalume aluminum zinc coating GI based ridges of 0.60 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and complete all as specified and directed.

Surface dressing not exc. 15 cm deep as in soft / loose soil complete all as specified and directed.

Formwork to sides of concrete foundations , footings, bases of columns, raft & raft beams, sides & soffits (if any) of foundation and plinth beams and similar work vertical or batter complete all as specified and directed.

Formwork to side of pillars,posts,struts, piers,columns etc etc vertical or to batter complete all as specified & directed.

M&L 10mm dia & over TMT bars cut to length bent to shape required, including cranking, bending spirally or hooking for columns and binding with M.S wire annealed not less than 0.9 mm dia or securing with clips complete all as specified and directed.

All as per item No.65 here in before but 5mm dia and over upto and including 10mm dia as in stirrups,spacers and binders

M & L for TMT bars 6 to 8 mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for 75 mm thick PCC 1:2:4 type B-2 (using 40mm graded stone aggregate) as in floor/paving finish even and smooth without extra cement complete all as specified and directed.

M&L for 100 mm thick PCC 1:2:4 type B-2 (using 40mm graded stone aggregate) as in floor/hard standing surface finish even and fair without extra cement complete all as specified and directed.

Removing excavated /demolished materials/ soils .n exc 50m & deposting where directed at a level exc 1.5 Km but n exc 5 Km complete all as specified & directed.

M&L for mild steel plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, but with riveted,welded or boalted with attachment of grade Fe-450 W complete all as specified and directed.

M & L for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 10cm long, dia of neck 5 to 10 mm complete all as specified and directed.

M& L for preparation of new steel surfaces of any description, over 10cm in width or girth,not otherwise described , applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

M & L for one coat of black bituminous paint including preparation of new steel surfaces of any description, over 10 cm in width or girth complete all as specified and directed.

S & F galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, straining bolts at ends, staples or steel pins etc. complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base finished to receive floor treatment etc complete all as specified and directed.

M & L for 75 mm thick cement concrete 1:3:6 type C-2, using 40 mm graded crushed stone aggregate as in plinth protectionand finished the surface even and smooth without using extra cement complete all as specified and directed.

M & L for Machine pressed precast concrete interlocking paver block with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and directed.

M&L for two coats of painting floors with ready mixed paint, for use on floors complete all as specified and directed.

M&L for Forming contraction (Dummy) joints 75 mm deep x 10 mm wide, filled with sealing compound Grade 'A' complete all as specified and directed.

M&L for Forming contraction (Dummy) joints 65 mm deep x 10 mm wide, filled with sealing compound Grade 'A' complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base finished to receive floor treatment etc complete all as specified and directed.

M & L for 40 mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate) as in sub floor of floor finishes, finished with extra cement complete all as specified and directed.

M & L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick cement screed bed in CM 1:6 complete all as specified and directed.

M & L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in vertical surfaces ie skirting/Dado etc etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat in CM 1:3 complete all as specified and directed.

S & F for aluminium powder coated of colour as approved openable sliding type three track windows/ventlators with sliding shutter and frame made with frame of aluminium section of size including 5 mm thick tinted glass and mosquito proofing net as indicated below complete all as specified and directed : (a) frame 76.20 x 44.46 x 2mm (b) Shutter top bottom and side rails 83.50X14.45X2mm (c) Grill : Aluminium grill 7.5 mm dia design No. DG-102 make DEDO grill or design No. AL-103 make fixed to aluminum section 50X20X1.5 mm in existing opening. (d) Glass 5 mm thick one side reflective glass and other side visible of with rubber gasket with clips and hold fast 04 Nos. for each window including necessary handles, tower bolt etc complete (e) Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm fixed with tinned tacks or galvanised wire staples complete Make : Jindal/ Hindalco/Indalco

S & F for aluminium section powder coated of colour as approved door with frame and shutter partially glazing 5.5 mm thick one side reflective glass and PVC composite board 5 mm thick fixed with aluminum clip section door section No. 4407 of aluminum door shutter as under complete and all as specified and directed. (i) Frame : 100x40x2MM SECTION No. 2420 (ii) Shutter style 85X44.45X3mm thick section No. 4526 (iii) Top rail 95.25X44.45X1.7mm thick section No. 4553 (iv) middle rail 83.50X44.75X1.7 mm thick section No. 4565 (v) Bottom rail : 114.30X44.15X1.7 mm thick section 4529 (vi) Glazing clip 0.7 mm thick section No. 4407 (vii) 02 Nos Handle Powder coated Alumniuym 200 mm long as approved (viii) Tower Bolt 9.90 mm dia and 200 mm long Section No. 4002 (ix) Mortice Lock 100 mm 7 liver make Godrej (x) Hold fast aluminum 100 mm long (xi) 01 Nos. floor door spring each shutters (xii) 01 No 300 mm long sliding door bolt. Make : Jindal/ Hindalco/Indalco

M&L for 75 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in floor/hard standing, surface finished even & smooth with using extra cement complete all as specified and directed.

M & L for preparation of old painted steel and iron surfaces not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for point wiring for one light point, fan point, bell point, 5 Ampere socket outlet point on independent board, controlled by one, one way switch with 1.50 sqmm size, PVC insulated, unsheathed 1100 volts grade single core multi-stranded copper conductor cable (FRLS) drawn into and including PVC conduit medium grade (not less than 20 mm dia) with and including its all necessary fittings and accessories fixed concealed with and including necessary chase cutting on brick / stone masonry walls and making good as per existing and sunk cast iron or 1.2 mm thick pressed steel terminal boxes for mounting fittings like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm size stranded copper conductor cable (FRLS) as in earth wire and connecting all metal parts to common earth dolly complete all as specified and directed.

All as per item No. 90 hereinbefore but wiring for one 3 / 5 pin 5 Ampere socket outlet point on the same board, controlled with other switches complete all as specified and directed.

All as per item No. 90 hereinbefore but wiring for one 3 / 6 pin 15 Ampere socket outlet point on independent board and wiring using with 2.50 sqmm size cables complete all as specified and directed.

S & F of Socket outlet 3 pin, 5A, flush type, 2 Modules complete all as specified and directed.

M/L for Switch piano flush type AC 230 volts 5 Amps single pole one way complete all as specified and directed by Engineer in charge.

M/L for Switch socket combination 5 pin 15 Amps AC 230 volts flush type complete all as specified and directed.

M & L of ceiling rose surface bakelite, 65 X 50 mm, three terminals, PVC / polycarbonate insulated body complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-Charge

S & F of flush mounting factory made SPN DB's Double door, 4 way with 200 amps rated bus bar , IP-43 Protection, IK-09 with metal door, with neutral bar, Earth bar and cables ties for cable management fully insulated bus bar with and including taking down old unserviceable one complete all as specified and directed.

S & F of isolator, double pole, 40 Ampere breaking capacity 10 KA, 240 volts with and including taking down old unserviceable one complete all as specified and directed.

S & F of MCB single pole 240 volts, 6 to 32 Ampere 50 Hz, 10 KA, ‘B’ series with and including taking down old unserviceable one complete all as specified and directed.

M & L for earthing complete with galvanised steel earth plate electrode 600 mm X 600 mm X 6 mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of earth plate not less than 1.50 m below normal ground level, connected to galvanised earth lead 4 mm dia all as shown on electrical plate No. 3 of MES schedule 2009, Part–I (Specifications) and connected to main switch board / main DB’s / earthing test point including all necessary excavation and earth work in any type of soil, adequate quantity of charcoal dust & common salt all around the earth plate minimum 150 mm in all directions with & including watering pipe 20 mm dia GI medium grade, GI funnel made out of 0.63 mm thick GI sheet, wire gauge, 50 mm thick RCC cover in PCC 1:2:4, type B-1, duly reinforced with 6 mm dia mild steel TMT bars @ 150 mm both ways center to center with suitable lifting handle to cover, earth pit of PCC 1:2:4 type B-1, GI protection pipe light grade 15 mm bore including testing on completion of job complete all as specified and directed. NOTE: - ON TESTING AFTER COMPLETION OF JOB, IF DESIRED EARTH RESISTANCE (i.e. LESS THAN ONE OHM) IS NOT OBTAINED, THE EARTHING SHALL BE REDONE BY THE CONTRACTOR WITHOUT ANY EXTRA COST TO GOVT.

M/L for XLPE/PVC insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 4 core 25 Sqmm complete all as specified and directed by Engineer in charge.

M & L for laying of course sand free from sharp materials as in filling in trenches for cable protection, laid to a uniform thickness of 23 cm (15 cm under the cable and 8 cm over the cable) and gently punned down to 18 cm thickness as required complete all as specified and directed.

M&L for sub class 'B' old size brick for covering to under ground cable laid dry flat transversally width equal to the length of the cable all as specified and directed.

M & L for GI Tubes, of size 40mm dia light grade, galvanised , with fitting fixed to wall/pole/ceiling or laid in floors complete all as specified and as directed.

S&F for 4 pole MCCB 40A 415V,16 KA to be fixed in existing panel complete all as specified and directed.

aditya construction