Restoration of Kanjari Village Tank Ta.Halol Dist. Panchmahal.

Name of Work:- Restoration of Kanjari Village Tank Ta.Halol Dist. Panchmahal.

BILL OF QUANTITIES

Item Description of Item (with brief Qty. Unit Rates In Amount

No. specification and reference to Figures (Without GST)

book of specifications) (Without GST)

Cleaning the slope of dam within the

dam boundry by removing the

bushes,shrubs girth and small trees

including depositing the materials as

and where directed up to 50 mt. and

all lift etc completed.

Deepening of tank in all type of soil

with yellow, sandy, gravelly soil

including wet and slushy condition

of soil including soft murrum & hard

2 murrum by machinery including 70000.00 Cum 82.60

conveying and spreading excavated

stuff as & where directed with lead

up to 1.00 km and all lift etc.

Providing & Placing in position

reinforcement bars including

cutting, bending, welding joints

where necessary, hooking etc.

complete as per drawing for all lead

and lifts. TMT / CRS (FE 500 D).

Providing & Laying in position

"DESIGN MIX" cement concrete

using cement sand and crushed

aggregate for C.C./ R.C.C work by

"FLORI" including necessary

formwork, centering, scaffolding,

compaction by vibrator, curing as

4 directed with all lead & lift etc 5980.88 Cum 4457.00

complete without dewatering and

excluding the cost of steel

reinforcement. (B) For Pier and

Abutments / Wing wall / Head wall

/ Return wall / Dowel Wall etc. (g)

Concrete grade M-15 and MSA-20

Item Description of Item (with brief Qty. Unit Rates In Amount

No. specification and reference to Figures (Without GST)

book of specifications) (Without GST)

Providing and laying dry rubble

pitching of various thickness to

required grade including trimming

5 of earth work , hand packing the 30858.30 m2 455.50

interstices with spauls, filling earth

in interstices panneling complete for

all leads and lifts. (a) 300mm thick.

Drilling holes 35 mm dia. Staggered

in all formations including rock for

6 low pressure grouting as per pattern 237.24 Rmt 512.30

shown on the drawing. For 0 to

Providing fabricating and erecting in

position service gate and emergency

gate including finishing, hoisting

arrangement embaded parts as per

approved design and drawing with

painting as directed etc. complete.

i.e. Rupees Seven Crores Forty One Lacs Fifty Nine Thousand Seventy Four and Seventy

Seven Paisas Only

I/We am/are willing to carry out the work at… .......................…..................................% above/below

percent (Should be written in figures and words) of the estimated rate mentioned above. Amount of

my /our tender works out as under.

*Estimated amount *Estimated amount

put to tender Rs._____________________ put to tender Rs. ________________

In words Rupees ____________________ In words Rupees _________________

(*Please strike out whichever is not applicable)

Above all items of BOQ" with Item Description, Unit, Qty, Rate & Amount have verified by me

and found order.

1 The Contractor shall exhibit a board with detailed specification and details of work as directed

by the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

Item Description of Item (with brief Qty. Unit Rates In Amount

No. specification and reference to Figures (Without GST)

book of specifications) (Without GST)

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.

G.R.: MIS102010/17/K1 Date:30/07/2018 as stated in S.O.R. therefore in R.C.C. items where

there is a change as per actual mix design the cost of difference of cement consumption have

been deducted from the rate of original item at the rate of input rate mentioned in all the

Deputy Executive Engineer Divisional Accounts Officer Executive Engineer

Minor Irrigation Sub Division Minor Irrigation Division Minor Irrigation Division

Halol Godhra Godhra