Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.9 LAccepted-Finance B S ROAD KOLIBARI TEZPUR 784 001 DIST SONITPUR ASSAM | SONITPUR | ASSAM | 784001 | L1 | Accepted-Finance Lowest bidder | |
| 2 | L2₹37.0 L+₹13,139 (0.36%)Rejected-Finance MAHABHAIRAB PO TEZPUR DISTT SONITPUR ASSAM PIN 784 001 | SONITPUR | ASSAM | 784001 | L2 | Rejected-Finance Unsuccessful bidder | |
| 3 | L3₹37.0 L+₹13,716.50 (0.37%)Rejected-Finance | L3 | Rejected-Finance Unsuccessful bidder | |
| 4 | L4₹37.2 L+₹29,415 (0.80%)Rejected-Finance | L4 | Rejected-Finance Unsuccessful bidder | |
| 5 | L5₹38.1 L+₹1.2 L (3.22%)Rejected-Finance | L5 | Rejected-Finance Unsuccessful bidder |
Tender Value
Refer Docs
EMD Value
₹7,600
Closing Date
30 Oct 2021, 6:00 pmClosed
GE (North) Tezpur
GE (North) Tezpur C/o 99 APO
REPAIR/REPLACEMENT OF STREET LIGHTS AT CERTAIN LOCS IN ZONE 7, 8 AND 9 AND REPAIR/MAINT OF LIGHTENING CONDUCTORS, PATH/GARDEN LIGHTS AND ALLIED WORKS AT CERTAIN LOCS IN NAA UNDER GE (N) TEZPUR
2021_MES_480746_1
GE(N)/TEZ/2021-22/8537
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE (North) Tezpur
As per tender documents
8 documents required · 8 mandatory
₹500
Yes
GE (North) Tezpur
₹7,600
Yes
16 Dec 2021
9 Oct 2021
1 Nov 2021
9 Oct 2021
30 Oct 2021
23 Oct 2021
Amount
Note 1: (Applicable for all parts/items) : The biidders/contractors are advised to read tender document, all drawings & all corrigendum/amendments and general condition of contracts before entry/quoting the rates. Note 2:- Attention to bidder is hereby invited to upload revised BOQ if published during their bid submission. Uploading of incorrect/ pre-revised BOQ shall be treated as non bonafide and rejected. Fixed credit has been given in technical documents which shall be taken into account during acceptance of bid/tender.
Dismantaling & taking down unserviceable light fittings LED Fittings/ HPSV Fittings, Pin /Holder type from pole/Bldgs/ground/post for repairs including replacement of unserviceable Lamp, holder,driver, integral wiring with appropriate gauge copper conductor and refixing the same after repairs in original position properly using PVC insulation tape or where directed complete including replacement of any spares,cable connections from OH conductors, or from junction boxes to light fitting complete all as specified and as directed. Note -Spares items such as LED driver and cable etc, will be measured and paid separately under respective items.
S&F in replacement of the following spare parts in LED light fittings complete all as specified and as directed :-
PVC insulated weather proof sheated alluminium cable 2.5 Sqmm 2 core with aluminium 2.5 Sqmm single core for earting complete all as specified and directed.
LED Driver 25 Watt complete all as specified and directed. Make-i) Philips ii) Surya Roshni Ltd iii)Bajaj iv )Havells v) Crompton Greaves vi) Orient.
LED Driver 30 Watt complete all as specified and directed. Make-i) Philips ii) Surya Roshni Ltd iii)Bajaj iv )Havells v) Crompton Greaves vi) Orient.
LED Driver 45 Watt complete all as specified and directed. Make-i) Philips ii) Surya Roshni Ltd iii)Bajaj iv )Havells v) Crompton Greaves vi) Orient.
LED Driver 60 Watt complete all as specified and directed. Make-i) Philips ii) Surya Roshni Ltd iii)Bajaj iv )Havells v) Crompton Greaves vi) Orient.
LED Driver 70 Watt of flood light complete all as specified and directed. Make-i) Philips ii) Surya Roshni Ltd iii)Bajaj iv )Havells v) Crompton Greaves vi) Orient.
LED Driver 150 Watt of flood light complete all as specified and directed. Make-i) Philips ii) Surya Roshni Ltd iii)Bajaj iv )Havells v) Crompton Greaves vi) Orient.
LED 10 Watt bulb of bollard light complete all as specified and directed. Make-i) Philips ii) Surya Roshni Ltd iii)Bajaj iv )Havells v) Crompton Greaves vi) Orient.
S&F in replacement for path light LED bollard 10W in cylindrical shape with opal acrylic diffuser and IP 65 & IK-10 protection with silent observer and giving light, diffuser at the upper portion acts a beacon of path guidance in a landscape enironment fixed on PCC 1:4:8 type D2 40mm graded complete all as specified and directed. Make-Crompton Greaves Cat Prt No-LBLTW-10-WW(Twister) or equivalent of i) Philips ii) Surya Roshni Ltd iii)Bajaj iv )Havells v) Century LED Ltd vi) Orient.
S&F Thermoplastic Cable Junction Boxes IP66/67 "weather proof" , for outdoor installation with knockouts for cable entry for streetlight with terminals suitable for 10-16 sqmm cable of Size 155 X 210 X 92 mm incl aluninium busbar and MCB SP 6 amps 1 No, for street light, including necessary clamps for fixing with street light pole, and connecting all incoming and outgoing cables with AL lugs of appropiate sizes complete all as specified and directed. Make-Hensel Cat Part No-KF1616G or equivalent in sintex.
S&F in replacement new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 flood luminaire with high power LEDs as light source with secondary optics & exclusively designed polycarbonate cover along with electronic driver of rating 70W LED Flood light including connecting with 2 core aluminium conductor 2.5 Sqmm & single core aluminium conductor 2.5 Sqmm for earthing with Overhead conductors/UG Cables/Junction box complete all as specified and directed. Make-Havells Cat No- JETA PROFL70WLED757LT G of Havells or equivalent of i) Philips ii) Surya Roshni Ltd iii) Bajaj iv )Havells v) Century LED Ltd vi) Orient Note:- . Note:- i) 5 years manufacturer's Warranty and test certificate shall be provided for LED fittings. (ii) Driver and luminaire shall be of same make
S&F in replacement new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP65 flood luminaire with high power LEDs as light source with secondary optics & exclusively designed polycarbonate cover along with electronic driver of rating 150W LED Flood light including connecting with 2 core aluminium conductor 2.5 Sqmm & single core aluminium conductor 2.5 Sqmm for earthing with Overhead conductors/UG Cables/Junction box complete all as specified and directed. Make-Havells Cat No-JETAIRISFLS 150WLED757PSYMLT G or equivalent of i) Philips ii) Surya Roshni Ltd iii) Bajaj iv )Havells v) Century LED Ltd vi) Orient Note:- i) 5 years manufacturer's Warranty and test certificate shall be provided for LED fittings. (ii) Driver and luminaire shall be of same make
S&F LED Post Top Lantern of new generation, energy, saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape Luminaris with high power LEDs as light source of 25 Watt LED including fixing on 40 mm dia grouted post complete all as specified and directed. Make-Havells Cat No-RUBYPT25WLED757PSYMTOPC or equivalent of i) Philips ii) Surya Roshni Ltd iii) Bajaj iv )Havells v) Century LED Ltd vi) Orient
S&F for fabrication of Sheet metal enclosure, powder coated of Timelite Distribution Boards for automatic Switching of street lights internally pre wired by using suitable copper lugs including fixing with MS Clamp 40X5 mm to steel/RCC poles incl connection consisting of the following complete all as specified and directed.: (i) ASTRONOMICAL time switch 24 hrs operation 240 Volts Cat Part No.AUTS02AST00 of L&T or Equivalent of Legrand/Schneider (ii)3 pole contactor 40Amps Cat Part No.Cat No. CS 94190 of L&T or Equivalent of Legrand/Schneider (iii) MCB FP 32 Amps Cat Part No. Cat No. BB40320C of L&T or Equivalent in Legrand/Schneider
S&F in replacement of Time Switch, Digital control,Astronomical type suitable for daily operation in 230 volts AC supply complete all as specified and directed. Make-L&T Cat No-AUTS02AST00 or Equivalent in Legrand/Schneider.
S&F in replacement of three pole power contactor with control relay with AC Coil suitable for operation in 415 volts AC supplywith 230 volt relay coil and current rating 40Amps complete all as specified and directed. Make-L&T Cat No-CS 94190 or Equivalent in Legrand/Schneider.
S&F in replacement of MCB FP 32A 'C' Type for operation in 230/415 volts AC supply complete all as specified and directed. Make-L&T Cat No-BB40320C or Equivalent in Legrand/Schneider.
M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground (earth pit not less than 2.25 metre below ground level) with top edge of the earth plate not less than 1.5 metre below ground level, connected to GI earth wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part I connected to earth test point all as specified or indicated including excavation and connected earth work, in soft/loose soil, removing soil upto 50m, PCC 1:3:6 type C1 as in pit, 20mm dia GI pipe medium grade for watering pipe, 15mm bore GI medium grade earth lead protection pipe, 50mm thick RCC 1:2:4 type B1 cover slab of earth pit reinforced with 8 mm dia TMT Bars @ 10cm C/C both ways and with handle made out of 20mm dia bars, funnel, strainer, alternate layer of charcoal dust and common salt and testing on completion, complete all as specified and directed.
Taking down LT UG Cables of any size from trenches/poles complete after disconnection complete all as specified and directed.
Supply, laying, jointing and testing LT cable in trenches or on poles / walls, XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm, 2 core complete all as specified and directed.
Supply, laying, jointing and testing LT cable in trenches or on poles / walls, XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm, 2 core complete all as specified and directed.
Supply, laying, jointing and testing LT cable in trenches or on poles / walls, XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm, 4 core complete all as specified and directed.
S&F PVC conduit along with RCC/Steel tubular pole, medium grade ISI marked not less than 20mm dia fixed with ms clamp or by ms wire complete all as specified and directed.
S&F 40 mm dia GI tubing light grade with all necessary fittings laid in trenches, fixed to walls/ poles/ under road/ floor etc for cable protection, complete all as specified and directed.
S&F 50 mm dia GI tubing light grade with all necessary fittings laid in trenches, fixed to walls/ poles/ under road/ floor etc for cable protection, complete all as specified and directed.
Taking down old unsv Earthing of any type including all its accessories complete all as specified and directed.
Taking down old unsv GI iron strip of any size including all its accessories complete all as specified and directed.
Taking down old unsv Alluminium strip of any size including all its accessories complete all as specified and directed.
M&L Earthing complete with GI earth plate electrode 60cmX60cmX6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connecting to galvanized earth strip 32 x 6 mm as earthing conductor by means of bolts, nuts, check nuts and washers of GI and all as shown in Electrical plate No.5 of SSR Part I and including testing on completion all as specified locations and as directed by the Engineer-in-Charge complete all as specified and directed. Note: 1.The above quoted rate shall include cost of main earthing lead of 32 x 6mm GI earth strip, charcoal, salt, excavation and earth work in any type of soil CI cover, funnel with 20mm dia light grade GI water pipe including GI protection pipe 40mm dia light grade for earth strip etc. 2. The cost of earth pit is deemed to be included in the unit rate.
S&F in repairs Air termination, single pointed, copper rod 12mm dia and 300mm long icluding necessary fixing arrangement using MS clamps,nuts & bolts complete all as specified and directed.
S&F Alluminium strip 25 x 3.15 mm with procelain saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and directed.
S & F in repairs Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all as specified and directed
S & F in repairs Galvanised iron strip 32 x 6mm buried in ground or fixed to Roof, Walls by using appropriate insulating Boxes with screws complete all as specified and directed.
Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundations etc, or for shafts, wells, cesspits, man holes, pier holes etc not exc 10 sq m on plan and getting out in soft / loose soil complete all as specified and directed.
Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft / loose soil complete all as specified and directed.
Removing excavated materials (soil) not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.
M&L for sand cushioning for cable protection using clean dry sand complete all as specified and directed.
Supply and laying in trenches brick common burnt clay building brick, sub class 'B' designated- 75 with width equal to length of brick for cable protection complete all as specified and directed.
M&L for PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as in foundations of Poles and filling of mass concrete complete all as specified and directed.
Taking down down/dismantling old/rusted/deshaped cross arms/MS channel or angle for reuse complete all as specified and directed.
Dismantling insulators any type, any size including setting aside serviceable and removal of rubbish material complete all as specified and directed.
Dismantling of ACSR conductors of any description,stacking serviceable conductor aside for reuse and removing unsv/broken conductor complete all as specified and directed.
Taking down down/dismantling old/broken stay assembly complete including demolition of concrete, etc. and excavation complete all as specified and directed.
Dismantling /taking down old rusted /broken GI earth wire from feeder or distributor span complete all as specified and directed.
Taking down down/dismantling old broken RCC poles/struts,removing from site and making good disturbed surface complete all as specified and directed.
Taking down down/dismantling old/rusted/broken steel poles/struts,removing from site and making good disturbed surface complete all as specified and directed.
S&F in replacement New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66 roadway luminaire with high power LEDs as light source with secondary optics & exclusively designed polycarbonate cover alongwith electronic driver suitable for upto 40 mm dia bracket size of rating 25 W LED including connecting with 2 core aluminium conductor 2.5 Sqmm & single core aluminium conductor 2.5 Sqmm for earthing with Overhead conductors or UG Cables complete all as specified and directed. Make-Havells Cat No-ENDURAPEARLSL25WLED757SASYTOPCMP or equivalent of i) Philips ii) Surya Roshni Ltd iii) Bajaj iv )Havells v) Century LED Ltd vi) Orient
Supply and Fixing in replacement New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66 roadway luminaire with high power LEDs as light source with secondary optics & exclusively designed polycarbonate cover alongwith electronic driver suitable for upto 40 mm dia bracket size of rating 35 W LED including connecting with 2 core aluminium conductor 2.5 Sqmm & single core aluminium conductor 2.5 Sqmm for earthing with Overhead conductors or UG Cables complete all as specified and directed. Make-Havells Cat No-ENDURACITYLITEPLAT PLUSSL35WLED757SASYBOPC or equivalent of i) Philips ii) Surya Roshni Ltd iii) Bajaj iv )Havells v) Century LED Ltd vi) Orient
Supply and Fixing in replacement New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP65 roadway luminaire with high power LEDs as light source with secondary optics & exclusively designed polycarbonate cover alongwith electronic driver suitable for 40 mm dia bracket size of rating 45 W LED including connecting with 2 core aluminium conductor 2.5 Sqmm & single core aluminium conductor 2.5 Sqmm for earthing with Overhead conductors or UG Cables complete all as specified and directed. Make-Havells Cat No-ENDURAPEARLNEOSL45WLED757PASYTOPC or equivalent of i) Philips ii) Surya Roshni Ltd iii) Bajaj iv )Havells v) Century LED Ltd vi) Orient
S&F in replacement New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP65 roadway luminaire with high power LEDs as light source with secondary optics & exclusively designed polycarbonate cover alongwith electronic driver suitable for 40 mm dia bracket size of rating 60 W LED including connecting with 3 core aluminium conducor 2.5 Sqmm with Overhead conductors or UG Cables complete all as specified and directed. Make-Havells Cat No-ENDURAPEARLNEOSL60WLED757PASYTOPC or equivalent of i) Philips ii) Surya Roshni Ltd iii) Bajaj iv )Havells v) Century LED Ltd vi) Orient.
S&F for street light bracket made out of 32 mm dia GI pipe medium grade 120 cm long cut to size and bend to shape , fixing for LT steel poles with flat iron clamps 40mm x 6 mm – 02 sets including nuts, bolts and washers including one coat of aluminium pait over acoat of red oxide primer including taking down of old unserviceable complete all as specified and directed.
S&F in replacement for cross arms, bracings, supports, clamps, straps D-clamps, back plates and MS frames fabricated from structural steel sections such as MS channel, angle iron and flats etc including nuts, ,bolts, washers eye hooks, welding, bending cold or hot drilling holes for bolts in any shape or size including two coats of synthetic aluminium paint over a coat of red oxide primer after preparation of steel surface complete all as specified and directed.
S&F in replacement of shackle type Insulator porcelain vitreous white/ brown or green, 75 mm high and 90mm dia suitable for working pressure of 1100 Volt including Galvanized mild steel straps of size 31x3 mm , nut, bolt of dia 12 mm and washers of suitable size, complete all as specified and directed.
S&F in replacement of pin Insulators Porcelain vitreous white or green including Galvanized mild steel spindle, two GI washers and one GI nut of size suitable for 1100 Volt electric pressure complete all as specified and directed.
Supply & Erecting Steel Tubular Swaged Pole Type 410-SP-31 (9.0 mtrs long) including Cast Iron Base Plate, Finial Taper Plug, Cap, Mild Steel Bolts, Nuts, Screws including applying two coats of Black Bituminous paint from bottom End of Pole upto PCC Coping and applying with two coats of Aluminium Paint over a coat of Primer (Externally from Top of Coping), including necessary earth work, excavation, PCC 1:3:6 using 40mm graded sone aggregate for foundation and coping with PCC 1:2:4 using 20mm stone aggregate and smooth finish complete all as specified and as directed complete all as specified and directed.
S&F 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor served with inner sheathing of PVC tap and over all PVC sheadthed in service connection 6 Sqmm flat twin core to be fixed on RCC/Steel pole to building connection through GI clamp/pipe complete all as specified and directed.
S&F 1100 volts grade PVC insulated weather proof sheated alluminium cable 2.5 Sqmm 2 core with 2.5 Sqmm single core for earting including PVC conduite medium grade not less than 19/20mm dia fixed with RCC/steel tubular pole clamp or by any other means complete all as specified and directed. Note PVC conduite will be measured and paid seperately.
D G Corporation
M/S Deep-Jeet
M/S Barua Enterprise
M/S Inder SINGH SABARWALL
M/S S.K. Sharma
DRISTEE ASSOCIATES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .