Augmentation/Stabilization of 33 KV Nehalpora-Gulmarg Line from Nehalpora upto Tangmarg

Amount

Supply, Carriage upto site (including Loading/Unloading),Testing and Erection of Steel Tubular Pole, 13 Mtr. Long Pole (ST-410 SP 69) with planting depth of 1/6 th of the height of the pole, (13 mtr. Long ) as per approved drawings/standards

Supply, Carriage upto site (including Loading/Unloading),Testing and Erection of Steel Tubular Pole, 11 Mtr. Long Pole(ST-410 SP-56) with planting depth of 1/6 th of the height of the pole, (11 mtr. Long ) as per approved drawings/standards

Supply, Carriage upto site (including Loading/Unloading), Laying ,Stringing, Tensioning & Binding of ACSR Conductor, (200 Sqmm ACSR Conductor) as per approved drawings/standards

Supply, Carriage upto site (including Loading/Unloading),Testing & Fixing of GI Channel/ GI V X Arms/Extension Top/Angle Iron/Flat/Belting Angle/Anti Skidding Clamps/Fuse plates of various sizes including clamps as per approved drawings/standards

Supply, Carriage upto site (including Loading/Unloading),Testing & Fixing of PG/T Clamps suitable for 200 Sqmm ACSR as per approved drawings/standards

Supply, Carriage upto site (including Loading/Unloading),Testing & Fixing of 33kV Polymeric composite Pin Insulator 36kV, 10kN, Lighting Impulse 170kV Positive and 180kV Negative, creepage distance 900mm (reputed make)as per approved drawings/standards

Supply, Carriage upto site (including Loading/Unloading),Testing & Fixing of 33kV Polymeric composite Disc Insulator 36kV,min failing load 70kN, Lighting Impulse 170kV Positive and 180kV Negative, creepage distance 900mm with disc fitting (reputed make) as per approved drawings/standards

Supply, Carriage upto site (including Loading/Unloading),Testing & Fixing of Galvinized Nuts and Bolts as per approved drawings/standards

Supply, Carriage upto site (including Loading/Unloading),Testing ,Fixing & Commissioning of 33 kV Isolator with Earthing Blade (36kV,800A, Outdoor,3 poles, 25 kA) as per approved drawings/standards

Supply, Carriage upto site (including Loading/Unloading),Testing & Fixing of Spike Earthing Rod 20mm 2.5 Mtr long with GI strip (25x3)mm as per approved drawings/standards

Supply & Laying of Cement bottoming for 11 Mtr ST Pole in 1:2:4 mix as per Standards 0.66 cum / pole including the Loading/Carriage/Unloading of required material.

Supply & Laying of Cement bottoming for 13 Mtr ST Pole in 1:2:4 mix as per Standards 0.78 cum / pole including the Loading/Carriage/Unloading of required material.

Supply, Carriage upto site (including Loading/Unloading),Testing & Fixing of Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2No.), anchor plate (300x 300 x 8 mm), nut-bolts, 2No.turnbuckles, 1.8m long,20 mm diameter solid GS stay rod & 7/4 mm dia GI stranded wire complete as per approved drawings/standards

Supply,Testing,Loading,Carriage,Unloading and fixing of Guard Netting as per approved drawings/standards

Supply,Testing,Loading,Carriage,Unloading and fixing of Danger Plates with Clamps as per approved drawings/standards

Supply,Testing,Loading,Carriage,Unloading and fixing of Anti-Climbing Device with Clamps as per approved drawings/standards

Providing & Painting of Poles with one coat of Red Oxide and two coats of aluminium paint and as per approved drawings/standards

Engagement of skilled labour along with necessary machinery(power saw) for cutting and clearance of tree branches interfering with electrical lines (whereever required), including proper disposal/stacking of cut material, complete with all tools, tackles, machinery, and safety equipment, as per directions of the Engineer-in-Charge

Dismantalling of Existing Old ST/Wooden/PCC/Lattice Poles and subsequent transportation of dismantalled material to divisional stores

Dismantalling of Existing Old ACSR including Insulators/Fittings and subsequent transportation of dismantalled material to divisional stores

Dismantalling of Existing Old Channnels/X Arms and subsequent transportation of dismantalled material to divisional stores

CONTENGENCIES /T&P

Hiring of Vehicle (Scorpio/Bolero/Innova/Tavera or equivalent) to be used by the Engineer Incharge for supervision of the project including Fuel/Toll Tax/ Driver/ any other maintenace charges of the vehicle. The max. Kms to be driven per day is 120 Km. In case the vehicle is utilized less than 120 km on any given day, the payment shall be subject to deduction on account of actual fuel savings. Such deduction shall be worked out proportionately based on the approved mileage (km per litre) of the vehicle and the prevailing fuel rate.

Supply and installation of Foundation Board and Inaugural Board of size 4 ft × 3 ft, made of high-quality acrylic sheet with suitable framing, mounting arrangement, and decorative curtains, including printing/engraving of approved text, logos, Government emblem, department name, and project details, complete in all respects as per directions of the Engineer-in-Charge.

Supply of heavy-duty petrol engine–operated power saw suitable for cutting wood complete with standard accessories, safety guards, robust base, and precision cutting arrangement, equipped with petrol engine of not less than 52 CC capacity, with 18–20 inch guide bar and chain, of approved make and quality, as per directions of the Engineer-in-Charge

Supply of ISI-marked Safety Helmet made of high-quality, impact-resistant HDPE/ABS material, equipped with adjustable headband, chin strap, ventilation system, and sweat-absorbent inner lining, conforming to IS:2925 standards, of approved make and colour, as per directions of the Engineer-in-Charge

Supply of ISI-marked Safety Belt / Full Body Harness made of high-strength polyester webbing with adjustable shoulder and thigh straps, equipped with double lanyard, shock absorber, and forged steel snap hooks, conforming to IS:3521 standards, of approved make and quality, as per directions of the Engineer-in-Charge

Supply of ISI-marked industrial Safety Shoes made of genuine leather with steel toe cap, oil/acid/slip resistant PU sole, shock-absorbing heel, and padded ankle support, conforming to IS:15298 (Part 2) standards, of approved make, size, and quality, as per directions of the Engineer-in-Charge

Supply of Electrical Rubber Insulating Gloves suitable for working up to 33 kV, made of high-dielectric natural rubber, seamless, ergonomically designed, conforming to IS:4770 / IEC 60903 standards, duly tested and certified, complete with manufacturer’s test certificate, of approved make and quality, as per directions of the Engineer-in-Charge.

Supply of Earthing Discharge Rod suitable for safely discharging high-voltage lines/equipment up to 33 kV, made of high-quality epoxy/fiberglass insulating rod with metallic clamp, complete with 16 sqmm multi-strand copper earthing cable of adequate length and earthing terminal, conforming to relevant IS/IEC standards, complete with carrying case, of approved make and quality, as per directions of the Engineer-in-Charge

Supply of High Voltage Detector suitable for outdoor/indoor use, capable of detecting multiple voltage levels ranging from 3.3 kV to 33 kV (or higher as specified), provided with clear audible and visual indication, telescopic epoxy/fiberglass insulating rod, battery-operated electronic circuit, and complete with carrying case, conforming to relevant IS/IEC standards, of approved make and quality, as per directions of the Engineer-in-Charge

Supply of heavy-duty rechargeable LED Search Light with high-intensity beam, minimum 10 W power, dual-mode operation (strong and dim light), beam range not less than 500 meters, backup time of minimum 6–8 hours, housed in robust weatherproof casing, complete with charger and accessories, of approved make and quality, as per directions of the Engineer-in-Charge.

Supply of waterproof Rain Coat made of high-quality PVC/Nylon fabric with heat-sealed seams, full sleeves, adjustable hood with drawstring, front zipper with flap, and matching waterproof trousers, complete with carrying pouch, of approved make, size, and quality, as per directions of the Engineer-in-Charge.

Supply of heavy-duty Ratchet Type ACSR Conductor Cutter suitable for cutting Aluminum Conductor Steel Reinforced (ACSR) up to 200 sqmm size, made of high-grade alloy steel with hardened and tempered cutting blades, equipped with insulated handles and ratchet mechanism for smooth operation, conforming to relevant IS/IEC standards, of approved make and quality, as per directions of the Engineer-in-Charge

Supply of heavy-duty Aluminium Extension Ladder of size 2 × 20 feet (two-section), fabricated from high-tensile aluminium ‘C’ section, with minimum 3 mm wall thickness, complete with rope and pulley arrangement for smooth extension, anti-skid steps, rubber shoes at the base, and safety locking arrangement, of approved make and quality, as per directions of the Engineer-in-Charge

Supply of heavy-duty Telescopic Aluminium Ladder of maximum extended height 18 ft, made of high-tensile aluminium alloy sections with minimum 3 mm wall thickness, equipped with slip-resistant steps, rubber shoes at the base, safety locking mechanism at each stage, lightweight and portable design, conforming to IS standards, of approved make and quality, as per directions of the Engineer-in-Charge

Supply of Manila Rope of natural fibre, 3-strand twisted, minimum 20 mm diameter, high tensile strength, durable, weather resistant, and suitable for heavy-duty outdoor/industrial use, of approved make and quality, as per directions of the Engineer-in-Charge.

Supply of Polypropylene (PP) Rope, 3-strand twisted, minimum 20 mm diameter, high tensile strength, lightweight, UV and abrasion resistant, waterproof, and suitable for outdoor/industrial use, supplied in standard coil length (100 m or as specified), of approved make and quality, as per directions of the Engineer-in-Charge

Supply of A4 size Copier Paper (210 mm × 297 mm), 75–80 GSM, 500 sheets per ream, smooth finish, suitable for high-speed photocopiers and printers, packed in moisture-proof ream wrappers, of approved make and quality, as per directions of the Engineer-in-Charge.

Supply of Original Printer Cartridge/Ink Toner-Canon 071 compatible with Canon MF 275 dw , high-yield type ensuring clear and smudge-free printing, duly packed and sealed, with manufacturer’s warranty, of approved make and quality, as per directions of the Engineer-in-Charge.

Supply of Original Printer Cartridge/Ink Toner-HP 110 A compatible with HP Laserjet 136 A , high-yield type ensuring clear and smudge-free printing, duly packed and sealed, with manufacturer’s warranty, of approved make and quality, as per directions of the Engineer-in-Charge.

UMAR ELECTRICALS (BID ID -2559956)