ARMO of EM Installations at Tirupati Airport for the year 2021 to 22. Sub Head Supply of Ground Lighting Facility Spares

Amount

Supply of 200W, 6.6A, Bi-pin Halogen lamp for Airfield ground lighting facilities as per ICAO/CAR compliance and AAI specifications. OSRAM make Cat no. 64386 or equivalent

Supply of Lamp holder suitable for Bi-pin Halogen lamp for Airfield ground lighting facilities as per ICAO/CAR compliance and AAI specifications

Supply of 5KV grade plug and receptacle of type I class "B" connector suitable for field attachment with 5KV grade PVC insulated PVC sheathed single core 6 mm2 copper conductor cable as per ICAO/CAR compliance and AAI specifications etc. complete as required.

Supply of 5KV grade plug and receptacle of type I class "B" connector suitable for field attachment with 5KV grade PVC insulated PVC sheathed single core 16 mm2 copper conductor cable as per ICAO/CAR compliance and AAI specifications etc. complete as required.

Supply of Rubber gasket for base plate of runway and taxiway fittings

Supply of 15 Watts 6.6/6.6 Amps 5KV grade 50Hz isolating transformer series type encapsulated in polyster resin finally moulded in neoprene type rubber with primary and secondary connections as specified in particular specifications.

Supply of 105W, 6.6A, Halogen lamp for Inset fittings Airfield ground lighting facilities as per ICAO/CAR compliance and AAI specifications. OSRAM make Cat no. 64339A or equivalent.

Supply of HT Tape (Water resistant self fusing/sealing tape) roll of 38mm x 9.1mtr size suitable for U/G cable application etc.

Supply of 2x2.5 sq. mm Cu conductor, 1100V grade Two pin Secondary plug assembly of length 0.3Mtr. with male connector, suitable for AUN, ALN and ALD type fitting of M/s AMA make.

Supply of 2x2.5 sq. mm Cu conductor, 1100V grade Two pin Secondary plug assembly of length 2.5Mtr., suitable for PAPI assembly of M/s AMA make.

Supply of 180° Filter - Red for AMA AUN Runway Fitting

Supply of 180° Filter - Yellow for AMA AUN Runway Fitting

Supply of converter suitable for NASU make Guidance Signage Boards having input from CCR current 2.8 A to 6.6A & output 35 Volt DC, and not less than 72 watts for board having height 800mm and suitable for entire length of board from 0.8m to 3m.

Supply of converter for existing signage board with dual input and in-built change over suitable for Make POSHDECOR ( Sign board having length from 800mm up to 3000mm and should be illuminated by a single driver. The driver should work on runway current varying from 2.8 to 6.6 Amp & should have uniform brightness across the entire range of current variation from 2.8 Amp to 6.6 Amp. output 35 Volt DC, and not less than 72 watts

Supply of converter for existing signage board. of Make: Electro System (Suitable for sign board having length from 800mm up to 3000mm and should be illuminated by a single driver. The driver should work on runway current varying from 2.8 to 6.6 Amp & should have uniform brightness across the entire range of current variation from 2.8 Amp to 6.6 Amp. output 25 Volt DC, and not less than 72 watts

Supply of converter for existing signage board. of Make: Electro System (Suitable for sign board having length from 800mm up to 3000mm and should be illuminated by a single driver. The driver should work on runway current varying from 2.8 to 6.6 Amp & should have uniform brightness across the entire range of current variation from 2.8 Amp to 6.6 Amp. output 20 Volt DC, and not less than 72 watts

Bafna Electric Corp

electromach sales agencies

Techno Electricals

AMA Private Limited