WB/SPRCE/NIT-01/ 2022-23

Amount

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. In Ground Floor: (a) One Coat

Add extra for each additional floor over the rate for ground floor on items item (8)of subhead A External surface (i) Upto 4th floor

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat) Super Protective 100% Acrylic Emulsion

Add extra for each additional floor over the rate for ground floor on items (15 to17) of subhead A External surface (i) Upto 4th floor

Scraping of moss, blisters etc.thoroughly from exterior surface of walls necessitating the use of scraper, wire brush etc.(Payment against this item will be made only when this has been done on the specific direction of the Engineer-in-charge)

Rounding corners with cement mortar (1:3) for crack repairs.

Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.

Renewing cornice (with mouldings but without floral or similar intricate patterns) including necessary masonry work and 15 mm. thick cement plaster(1:4) complete : In ground floor. (i) Projection (75 to 150) mm. (a) Depth (100 to 150) mm (Cement 4.3Kg/Mtr.)

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (ii) With 1:4 cement mortar (a) 20 mm thick plaster

Extra for each additional floor over the rate for ground floor items 1 to 3 of subhead A : (i) External plaster (a) Upto 4th floor

Extra for Rusticated plaster (over rate of corresponding item of plaster) (b) With stone chips (Cement 0.086 Cu.m/100Sq.m)

(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary (b) On steel or other metal surface : With super gloss (hi-gloss) - (ii) Two coats (white in shade)

Removing loose scales, blisters etc. from old painted surface and thoroughly smoothening the surface to make the same suitable for receiving fresh coat of paint.

Supplying, fitting and fixing in position fibre glass panes of approved quality with resin, nail, clip etc. as per IS:12866-1989. (In all floors for internal wall & upto 6 m height for external wall)floors for internal wall & upto 6 m height for external wall) e) 4.0 mm thick (6.72 Kg/Sq.m)

Renewing worn out putty of glass panes : (a) Panes not exceeding 0.2 Sq.m

M/S.BHATTACHARJEE CONSTRUCTION

SHANKAR DEBNATH