Loading…
Loading…
Tender Value
₹3.7 Cr
EMD Value
₹3.4 L
Closing Date
9 Mar 2026, 12:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
DEN SDG
15 conditions · 3 needing a document upload
Financial Eligibility Criteria (Clause 10.2 of part-I GCC-2022): The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. (Important Instruction: "The balance sheet and all other financial documents attested/certified by the Chartered Accountants (CA) to substantiate fulfillment of Financial Eligibility Criteria should be with UDIN, failing which the offer shall be considered as incomplete and will be summarily rejected without any further reference" Vide letter no. CE/Works/ECR/HJP's letter No.ECR-HQ0ENGG (CONT)/ 0009/2025 dtd. 18.11.2025 (ii) Gazette Notification No.1-CA (7)/192/2019, dated 02.08.2019 of the Institute of Chartered Accountants of India, published in the Gazette of India).
Technical Eligibility Criteria (Clause 10.1 of GCC-2022): (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b)(1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2) In such cases, what constitutes a component in a composite work shall be clearly pre- defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b)(3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract.
Note: for subletting of work costing up to Rs.50 lakh, no previous work experience of subcontractor shall be asked for by the Railway. In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract, with prior approval of Chief Engineer in writing. Note for Item 10.1: (Clause 10.1 of part-I GCC-2022): Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Similar Nature of Work:- Any P.Way Works.
13 conditions · 7 needing a document upload
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be.
If it is NOT mentioned in the submitted tender that tender is being submitted on behalf of a Sole Proprietorship firm / Partnership firm / Joint Venture / Registered Company etc., then the tender shall be treated as having been submitted by the individual who has signed the tender.
After opening of the tender, any document pertaining to the constitution of Sole Proprietorship Firm / Partnership Firm / Registered Company/ Registered Trust / Registered Society / HUF/LLP etc. shall be neither asked nor considered, if submitted. Further, no suo moto cognizance of any document available in public domain (i.e., on internet etc.) or in Railway's record/office files etc. will be taken for consideration of the tender, if no such mention is available in tender offer submitted.
The tenderer whether sole proprietor / a company or a partnership firm / joint venture (JV) / registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association/Board resolution, failing which tender shall be summarily rejected. A separate power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, shall be submitted after award of work, specifically authorizing him/them to deal with all other contractual activities subsequent to signing of agreement, if required. Note: A Power of Attorney executed and issued overseas, the document will also have to be legalized by the Indian Embassy and notarized in the jurisdiction where the Power of Attorney is being issued. However, the Power of Attorney provided by Bidders from countries that have signed the Hague Legislation Convention 1961 are not required to be legalized by the Indian Embassy if it carries a conforming Appostille certificate.
(a) The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / HUF etc. as the case may be. Following documents shall be submitted by the tenderer: - (b) Following documents shall be submitted by the tendeerer in case of Sole Proprietorship Firm; (i) An undertaking that he is not blacklisted or debarred by Railway or any othr Ministry/ Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which he was /is a partner/member. Concealment /wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract. (ii) All other documents in terms of Para 10 of the Tender Form (Second Sheet) of GCC-2022. (c) Following documents shall be submitted by the tenderer in case of HUF; (i) A copy of notarized affidavit on stamp paper declaring that he who is submitting the tender on behalf of HUF is in the position of Karta of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) An undertaking that the HUF is not blacklisted or debarred by Railway or any other Ministry /Department f Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member f the partnership firm or JV in which HUF was / is a partner/member. Concealment/wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract. (iii) All other documents in terms of Para 10 of the Tender Form (Second Sheet) of GCC-2022. (d) Following documents shall be submitted by the tenderer in case of Company registered under Companies Act 2013; (i) The copies of MOA(Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate o Incorporation (iii) A copy of Authorization /power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sing the tender on behalf of the company and create liability against the company. (iv) An undertaking that the Company is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which the Company was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract. (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet) of GCC-2022. Society/Trust. (iv) All other documents in terms of Para 10 of the Tender Form (Second Sheet) of GCC-2022.
(e) Following documents shall be submitted by the tenderer in case of LLP (Limited Liability Partnership): If the tender is submitted on behalf of a LLP registered under LLP Act-2008, the tenderer shall submit along with the tender: (i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking that the LLP is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of JV in which the LLP was / is a member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 6 2 o f t h e General Conditions o f Contract. ( v ) All other documents in terms of Para 10 of the Tender Form (Second Sheet) of GCC2022. (f) Following documents shall be submitted by the tenderer in case of Partnership Firm: The tenderer shall clearly specify that the tender is submitted on behalf of a partnership firm. (i) A notarized copy of partnership deed. (ii) A notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. (iii) An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of opening of bids, either in their individual capacity or in any firm in which they were / are partners. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract. (iv) All other documents in terms of Para 10 of the Tender Form (Second Sheet) of GCC-2022 and clause 18 of GCC-2022. (g) Following documents shall be submitted by the tenderer in case of Registered Society & Registered Trust (i) A copy of the Certificate of Registration (ii) A copy of Deed of Formation (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) All other documents in terms of Para 10 of the Tender Form (Second Sheet) of GCC-2022.
An undertaking that the Proprietary firm /Partnership firm/Company /Joint venture (JV) Registered society /Registered Trust /HUF/LLP ect. He is not blacklisted or debarred by Railway or any other Ministry/Department of Gov. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of JV in which the LLP was / is a member .Concealment/ wrong information in determination under Clause 62 of the General Conditions of Contract. For detail refer para 5 & 5.1 as above and GCC-2022 .
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
A copy of Documents against eligibility criteria must be submitted along with the E-tender. No any documents against the same will be entertained in the office of Divisional Railway Manager, Dhanbad or anywhere else at any time. Tender will be decided purely on the basis of documents available/attached with the E-tender irrespective of whether tenderer is working contractor or new. However Railway may ask clarification with respect to document available/attached with the E-tender, if required.
In case, submission of Bid Security in the form of Bank Guarantee, the original Bank Guarantee should be delivered to COS/Bill&Tender/Dhanbad (Official Nominated) before closing date for submission of bids. (i.e. excluding the last date of submission of bids) as per Para 3 (ii) of Sl. No.13 (Bid Security) of the tender document.
Dhanbad Division - TTR - 36 Sets ( TWS + CMSC-28 & CS + CMSC-8) under ADEN/KQR in connection with the work Dhanbad Division - TTR - 118 Sets (CS+CMSC - 24, TWS+CMSC - 60, TWS+WCMSC- 16, WCMSC - 5, TWS - 11, DS - 2).
316-DHN-2025-26~ECR
316-DHN-2025-26
Open
Works - General
12 Months
Dhanbad, Jharkhand
₹0
₹3.4 L
9 Mar 2026
11 Feb 2026
23 Feb 2026
72 items across 1 schedule · ₹3,72,68,356.25 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Up to 40 m long rail panel | RM | 4500.00 | 8.15 | 36,675 |
| 2 | For Casual/Scattered Rail Renewal work | RM | 4500.00 | 31.36 | 1,41,120 |
| 3 | For Casual/Scattered Rail Renewal work | RM | 4500.00 | 33.22 | 1,49,490 |
| 4 | Locations other than Ballasted Deck Bridge | Each | 1500.00 | 421.38 | 6,32,070 |
| 5 | Ballasted Deck Bridge | Each | 625.00 | 497.89 | 3,11,181.25 |
| 6 | For 1.00m long fishplates | Joint | 500.00 | 123.91 | 61,955 |
| 7 | Lubrication of ERCs and its liner contact area by removal of ERCs and Metal / GFN liners in rail panel, cleaning of rust / scale of ERC, Metal / GFN liners & SGCI insert by using wire brush, scrapper / sand emery paper etc supply and application of graphite grease, as prescribed by Railway for under side of liners & corresponding area of rail foot & SGCI insert with ERCs and re- fixing the same as per procedure prescribed in latest edition of IRPWM with contractors grease and all other tools & plants complete and as directed. Note: Each ERC in this item shall constitute 1 ERC and its Liner Contact area. | ERC | 50000.00 | 6.39 | 3,19,500 |
| 8 | By using Contractor's Grease Graphite | Each | 7500.00 | 37.25 | 2,79,375 |
| 9 | Renewal of seized Plate/Rail screws on PSC Sleepers by using gas or any approved methods, duly drilling holes in broken screw and removing existing screw pieces from the holes along with existing dowels and fixing new contractor's dowels (procured from RDSO approved sources) and grouting around dowel with Epoxy materials of approved specification and refixing new Railway's rail/Plate screws duly greasing the screw with specified grease with all contractor's materials, consumables, tools & plants, labour with all lead, lift. Note: 1.Seized screws shall be identified and marked by JE/P.Way and verified at minimum SSE/P.Way In charge) level. 2. Due care shall be taken to avoid any damage to the sleeper 3.A penalty of 50% of the basic cost of new sleeper in nearest sleeper factory shall be levied on each, if sleeper gets damaged in the process. | Each | 5000.00 | 329.3 | 16,46,500 |
| 10 | Rail section of 52Kg and above | Each | 200.00 | 123.11 | 24,622 |
| 11 | 1 in 12 Turnout | Set | 36.00 | 38,550.91 | 13,87,832.76 |
| 12 | 1 in 12 Points & Crossing | Set | 36.00 | 16,211.07 | 5,83,598.52 |
| 13 | Sleepers up to 2.85 m length | Each | 200.00 | 541.35 | 1,08,270 |
| 14 | Sleepers of length more than 2.85 m and up to 4.20 m | Each | 500.00 | 746.26 | 3,73,130 |
| 15 | Sleepers of more than 4.20 m length | Each | 200.00 | 1,176.8 | 2,35,360 |
| 16 | 1 in 12 Turnout | Set | 36.00 | 3,658.38 | 1,31,701.68 |
| 17 | 1 in 12 Switch Assembly | Set | 8.00 | 13,179.08 | 1,05,432.64 |
| 18 | For 1 in 12 Turnouts | Set | 28.00 | 27,030.76 | 7,56,861.28 |
| 19 | For 1 in 12 Turnouts | Set | 50.00 | 7,393.72 | 3,69,686 |
| 20 | Depth of 300 mm below bottom of sleeper - For Plain Track : | TRM | 6500.00 | 517.22 | 33,61,930 |
| 21 | Depth of 300 mm below bottom of sleeper for Turnouts | TRM | 6700.00 | 827.55 | 55,44,585 |
| 22 | Lifting and packing for regrading the existing PSC sleeper track to required height / level in stages not exceeding 75mm or part thereof at a time, providing permissible ramp for the track, insertion of moorum / sand / stone ballast uniformly under the existing track and placing the same to safe approved gradient, gauge, cushion including levelling and one round of through packing to allow train movement at restricted speed of 30 kmph for a specified length with all leads & lifts and fixing, marking, painting rail level pegs at every 30m interval. Note: Lifting of track shall be done in stages as per procedure prescribed in latest edition of IRPWM to get the proposed final level as per approved working profile, as directed by Engineer in-charge. | TRM | 20000.00 | 159.09 | 31,81,800 |
| 23 | Boxing and profiling of ballast as per procedure prescribed in latest edition of IRPWM including cess dressing on both sides of track. The work will include removing excess ballast from track and putting the same in crib and shoulder by leading to a maximum of 50m including crossing of track, deweeding on ballast section etc and as directed by Engineer-In charge. | TRM | 50000.00 | 23.36 | 11,68,000 |
| 24 | Under Traffic Block Conditions: | cum | 8000.00 | 46.52 | 3,72,160 |
| 25 | 25mm gap 'in-situ' welding during traffic block using Railway's welding portion & Welder and finishing of weld to meet the prescribed tolerances and pass all stipulated tests with all required labour, materials, consumables, tools, equipments etc. to complete the work in all respect as per IR's "Manual for Fusion Welding of Rails by Alumino - Thermic Process" with latest correction slips, including marking of welded joint, painting weld collar with anticorrosive paint, restoration of track near weld joint to original position and fixing of joggled fish plate at new weld, to be removed after passing of weld in USFD test as directed by Engineer in charge. Note: 1. Only welding portion and related accessories as per Annexure - I and Welder shall be supplied by Railways. 2. Hydraulic Weld trimmer shall be used for chipping and profile Grinder for finishing. 3. Required nos. of Joggled fish plates shall be supplied by Railway at nearest P. Way Stores and the same shall be returned at nearest P. Way Store or at other location as per direction of Engineer-in-Charge after release from track. | Each | 1250.00 | 1,454.36 | 18,17,950 |
| 26 | Rail length up to 13m - Under Traffic Block | RM | 3000.00 | 17.74 | 53,220 |
| 27 | For rails/panels of more than 13m and up to 40m length - Under Traffic Block | RM | 1500.00 | 26.22 | 39,330 |
| 28 | For PSC Sleeper Track with Sleeper Density of 1660 | TRM | 8300.00 | 122.61 | 10,17,663 |
| 29 | For PSC Sleeper Track with Sleeper Density of 1660 | TRM | 8300.00 | 94.31 | 7,82,773 |
| 30 | 1 in 8½ PSC layout | Set | 20.00 | 10,186.64 | 2,03,732.8 |
| 31 | 1 in 12 PSC layout | Set | 120.00 | 13,267.04 | 15,92,044.8 |
| 32 | Slack picking of joint sleepers and 3 approach sleepers on either sides giving required lift to make up general track level, packing and profiling as directed. | Each | 1000.00 | 501.22 | 5,01,220 |
| 33 | For PSC sleeper Track with Sleeper Density of 1540 sleepers/Km or more | TRM | 4000.00 | 158.27 | 6,33,080 |
| 34 | For PSC sleeper Track with Sleeper Density less than 1540 sleepers/Km | TRM | 1000.00 | 120.08 | 1,20,080 |
| 35 | Without Rail tensor | TRM | 15000.00 | 49.22 | 7,38,300 |
| 36 | Replacing existing glued joint rail with cut rails or with glued joint rail or insertion of glued joint by cutting existing track under traffic condition by cutting rails, refixing with all rail sleeper fastenings and providing required gaps for carrying out welding as an alternative to drilling holes or joining rails with fish plates duly drilling holes as required including stacking of released material and as directed by engineer in-charge. Note: (1) Drilling holes & rail cutting will be paid separately. (2) Transportation of materials to the site of work from supply points, if more than 250m, shall be paid separately. | Each | 230.00 | 1,576.35 | 3,62,560.5 |
| 37 | With Contractor's hard wood block. | Each | 500.00 | 2,510.39 | 12,55,195 |
| 38 | Drilling holes of 16mm to 22mm dia. on all types of PSC sleepers and fixing the dowels with adhesive of RDSO approved quality for fixing check rails & guard rails, as directed by Engineer in-charge. | Each | 2500.00 | 309.95 | 7,74,875 |
| 39 | Cleaning of side drains along the track including disposing of muck beyond Railway boundary as per instructions of Engineer in-charge to keep drains clean and clear in cuttings etc. | RM | 50000.00 | 28.77 | 14,38,500 |
| 40 | Removing weeds & bushes in ballast section and cess up to 3.95m from centre line of track in mid section & station yard, as specified by Engineer in-charge including disposal of branches, bushes outside cess/yard. | TRM | 50000.00 | 13.23 | 6,61,500 |
| 41 | For 60 Kg Rails | RM | 4500.00 | 73.04 | 3,28,680 |
| 42 | For 60 Kg Rails | TRM | 5700.00 | 100.43 | 5,72,451 |
| 43 | 1 in 12 Turnout | Set | 36.00 | 1,093.42 | 39,363.12 |
| 44 | 60 Kg - 110/90 UTS - Outside Track | Each | 1000.00 | 311.53 | 3,11,530 |
| 45 | 60 Kg - 110/90 UTS - On Running Line | Each | 1500.00 | 390.78 | 5,86,170 |
| 46 | On Running Line | Each | 2500.00 | 66.12 | 1,65,300 |
| 47 | I n Wagon where mechanical handling is possible and traffic block is not required or in Truck/trailer. | MT | 300.00 | 116.98 | 35,094 |
| 48 | For lead up to 500 metre. | MT | 280.00 | 340.23 | 95,264.4 |
| 49 | For lead beyond 500 metre and up to 1 Km. | MT | 220.00 | 439.46 | 96,681.2 |
| 50 | Extra to Items no. 171032 for lead beyond 1 Km for every subsequent Km or part thereof and up to 10 Km | MT | 100.00 | 52.69 | 5,269 |
| 51 | For lead up to 500m | MT | 60.00 | 385.05 | 23,103 |
| 52 | For lead beyond 500 metre and up to 1 Km | MT | 60.00 | 560.83 | 33,649.8 |
| 53 | Extra to Items no. 171042 for lead beyond 1 Km for every subsequent Km or part thereof and up to 10 Km | MT | 20.00 | 70.18 | 1,403.6 |
| 54 | During period of traffic block | MT | 271.53 | 25.84 | 7,016.34 |
| 55 | I n Wagon where mechanical handling is possible and traffic block is not required or in Truck / trailer | MT | 500.00 | 93.71 | 46,855 |
| 56 | I n Wagon/Truck / trailer where mechanical handling is possible a n d traffic block is not required. | MT | 452.00 | 116.55 | 52,680.6 |
| 57 | For lead up to 500 metres | MT | 200.00 | 264.82 | 52,964 |
| 58 | For lead beyond 500 metre and up to 1 Km | MT | 300.00 | 393.45 | 1,18,035 |
| 59 | Extra to Items no. 172032 for lead beyond 1 Km for every subsequent Km or part thereof and up to 10 Km | MT | 1500.00 | 41.09 | 61,635 |
| 60 | Lead beyond 100 Km and up to 150 Km | MT | 10.00 | 1,035.3 | 10,353 |
| 61 | Lead up to 5 Km | MT | 20.00 | 53.62 | 1,072.4 |
| 62 | Lead beyond 5 Km and up to 10 km | MT | 80.00 | 98.89 | 7,911.2 |
| 63 | Lead beyond 10 Km and up to 20 km | MT | 80.00 | 161.28 | 12,902.4 |
| 64 | Lead beyond 20 Km and up to 30 km | MT | 90.00 | 238.25 | 21,442.5 |
| 65 | Lead beyond 30 Km and up to 50 km | MT | 100.00 | 346.4 | 34,640 |
| 66 | Lead beyond 100 Km and up to 150 Km | MT | 800.00 | 938.48 | 7,50,784 |
| 67 | From Truck / Trailer | MT | 500.00 | 85.14 | 42,570 |
| 68 | From Truck / Trailer | MT | 452.00 | 89.68 | 40,535.36 |
| 69 | From Truck / Trailer | MT | 300.00 | 121.57 | 36,471 |
| 70 | Rails, switches, crossings, SEJ, Glued Joints, Check Rails etc. | MT | 565.00 | 337.04 | 1,90,427.6 |
| 71 | All type of PSC sleepers | MT | 550.00 | 368.44 | 2,02,642 |
| 72 | P.Way fittings of all types and other similar loose items | MT | 25.00 | 343.98 | 8,599.5 |
| Schedule total | ₹3,72,68,356.25 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .