Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.3 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹39.6 L+₹23,373.80 (0.59%)Rejected-Finance | L2 | Rejected-Finance Not lowest bidder | |
| 3 | L3₹44.0 L+₹4.7 L (12.0%)Rejected-Finance | L3 | Rejected-Finance Not lowest bidder |
Tender Value
₹45.0 L
EMD Value
₹89,980
Closing Date
5 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer, Banar
Garrison Engineer, Banar, Jodhpur-342027
REPAIR TO ROOF PROJECTIONS, CHAJJAS, FACIAS, COLUMN, BEAM, CANTILEVER BEAM, CGI SHEETING CANTILEVER AND IRON WORK INSIDE DEPOT AREA AT ARMY AREA AT BANAR, JODHPUR
2023_MES_601536_1
8823/06/E8
Open Tender
Civil Works
Item Rate
180 days
Banar
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Garrison Engineer, Banar
₹89,980
Yes
2 Aug 2023
6 Jun 2023
7 Jul 2023
6 Jun 2023
5 Jul 2023
21 Jun 2023
Amount
Demolition of RCC roofs, floors (other than ground floors), beams, staircase, landing, chajjas, balconies, roof projection and similar suspended work complete all as specified.
Taking down cement plaster on brick or stone walls or concrete surface etc including raking out joints, hacking for key, scrubbing down with water etc and its removal from site complete all as specified.
M & L for RCC (Nominal Mix) Type B1, 1:2:4 (20 mm graded stone aggregate) in Chhajja, balconies, roof projection and similar suspended work complete all as specified.
M&L for RCC type B-1 nominal mix (20mm graded aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified.
M&L for RCC type B-1 nominal mix (20mm graded aggregate) as Columns, pillars, piers, posts and struts complete all as speicified.
M&L formwork to fins, louvers, fascia, chajjas, roof projection in D/S bldgs, stair case fair finished surfaces complete all as specified.
M&L formwork to sides of pillars, posts, struts, piers, columns and stanchions fair finished surface complete all as specified.
M&L formwork to sides and soffits of floor or roof beams, beam haunch?ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified.
M & L for rendering 10 mm thick in cement mortar 1:4 with WPC on fair faces of brick work or concrete or stone surface in any position and in any location finished the surface even and smooth without using extra cement complete all as specified. Note : WPC will be paid separtely.
Supply only water proofing compound complete all as specified.
Material and labour for preparation of newly plastered surface of walls and applying two coats of cement base paint over one coat of alkali resistance primer complete all as specified.
M&L for two coats of cement base paint on old plastered/pointed surfaces of walls including necessary preparation of surfaces all as specified.
M&L for preparation of newly plastered or unplastered surfaces of ceilings and applying three coats of white wash complete all as specified.
M&L for preparation of old plastered or unplastered surfaces of ceilings and applying two coats of white wash complete all as specified.
M & L for TMT Bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping fr columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 dia or securing with clips and welding to existing reinforcement with flat iron of size 100x25x4mm complete all as specified.
All as per item Ser No 15.00 but 6mm to 8mm dia. Note applicable for Ser item No 1.00 to 16.00 :- Rates quoted by the contractor shall deemed the scope of work up to height of 7.00 metre from Ground Level.
Material and labour for providing and fixing stainless steel (Grade 304) railling made of hollow tubes, channels plates etc, including welding grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete all and including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bots etc, of required size on the top of floor or the side of waist slab with suitable arrangement complete all as specified.
S&F stainless steel dome 50mm dia including polishing complete all as specified.
S&F stainless steel cap 40mm dia complete all as specified and directed.
Demolition of cement concrete (un-reinforced) in ground floors and paving n. exc 15cm thickness (below or above ground level) complete all as specified.
M & L for 50 mm thick plain cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) in alternate bays finished even and smooth without using extra cement complete all as specified.
M&L for 50mm thick PCC 1:3:6 type C2 (Using 40 mm graded stone aggregate) as in plinth protection, concrete shall be laid in alternate bays n'exc 3.00 m in length, finished even and smooth without using extra cement complete all as specified.
M & L for 75 mm thick PCC 1:4:8, type D2 (using 40 mm graded stone aggregate) as in sub-base complete all as specified.
M & L for sand cushion under interlocking paver tiles including watering and consolidation complete all as specified.
M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness in grey cement and pigment with glossy finish, M-35 Grade complete all as specified.
Dismantling of stone slabs and tiles of any description or thickness in floor, apron etc laid bedded and pointed in any mortar complete all as specified.
M&L machine cut Kota stone 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (mirror face) as in flooring/treads of steps over and including 15 mm thick screed bed in CM 1:6 as approved and directed by Engineer-in-Charge.
M&L machine cut Kota stone 15-18 mm thick in riser of steps, skirting dado and pillar laid over and including 10 mm thick screed in CM (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (mirror face) as approved and directed by Engineer-in-Charge.
Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified.
M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, modular bricks in cement mortar built in CM 1:6 complete all as specified.
M&L for square rubble walling Jodhpur type regular course well bonded bedded and solidly hearted built in cement mortar (1:6) complete all as specified.
All as per item Ser No 31.00 above but except stone complete all as specified.
Extra over on stone walling for hammer dressing to face stone with maximum depression on face from straight edge n.exc. 20mm and dressing faces beds and joints as specified to square rubble walling regular course Jodhpur type complete all as specified.
M&L keyed pointing to stone squared coursed masonry in cement mortar (1:4) complete all as specified.
M & L 15 mm thick rendering in CM 1:4 on stone masonary surfaces with WPC and finishing the surface even and smooth without using extra cement complete all as specified. Note; WPC shall be paid separately.
M & L 15 mm thick rendering in CM 1:4 on brick masonary surfaces with WPC and finishing the surface even and smooth without using extra cement complete all as specified. Note; WPC shall be paid separately.
M & L for Precast cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate), block masonry with solid blocks as in kerbs, exc 10 cm in width and setting in cement mortar 1:4 complete all as specified.
M & L extra over rendering or plastering for work in Isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirting, drips moulds and similar work exc 15 cm but n.exc 30 cm in width or girth including cutting to edges, all miters and stopped ends,etc as per direction of Engr-in-Charge.
M&L PCC (1:2:4) type B1 using 20mm graded stone agg as in coppings, benching, kerbs, edges etc including necessary form work complete all as specified.
Dismantling plain or corrugated steel sheeting, any gauge thickness including Nainital or similar pattern roof covering complete all as specified.
S & F Pre painted galvalume aluminium zinc coating GI Based semi corrugated steel sheet of 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding to wall fixed with self tapping screws complete all as specified.
S & F Pre painted galvalume aluminium zinc coating GI Based plain steel sheet of 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding to wall fixed with self tapping screws complete all as specified.
M&L 6mm thick asbestos cement, corrugated or semi corrugated sheets in roofs, walls etc. fixed with L or J type or cranked hook bolts complete all as specified.
S&F 0.80 plain galvanised mild steel sheeting, on wall clading and ridges, valley gutters,drips and straight flashing complete all as specified.
Dismantiling wrought iron or mild steel work including of any description not otherwise provided complete all as specified.
S&F Rolled section as in main and cross beams, hips and Jack rafters, purlins where connected to common rafters and running rails and guides for sliding door, fixed with angle cleats or other connecting plates confirming to Fe-410-W Gde E-250 quality A complete all as specified.
S & f steel work in tubular trusses/post including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1998 grade St-240.complete all as specified.
S & f Fe 410 W (Gde-250) roof trusses(framed) trussed, purlins crane gantries, rails and fastenings and heavy bracket framing (beams,tee angle,channel or flat sections) including distance pieces,cleats etc, complete all as specified.
M & L for supply and application of single componenet, shrinkage controlled, polymer modified, fibre reinforced cementitious repair mortar REDEROC SP 40 of FOSROC or equivalent of Dr. Fixit/BASF/PIDILITE having compressive strength minimum 45MPa in 28 days and Flexural Strength 7 MPa in 28 days, for replacing the damaged part of concrete. The item includes cost towards all complete. (thickness of 15mm- upto 20mm).
M & L for supply and application of single componenet, shrinkage controlled, polymer modified, fibre reinforced cementitious repair mortar REDEROC SP 40 of FOSROC or equivalent of Dr. Fixit/BASF/PIDILITE having compressive strength minimum 45MPa in 28 days and Flexural Strength 7 MPa in 28 days, for replacing the damaged part of concrete. The item includes cost towards all complete. (thickness of more than 20mm - upto 30mm).
Supply only REBAKLENS of FOSROC or equvalent of Dr. FiXIT/BASF/PIDITILE need to be applied on the steel bars complete all as specified.
M&L for application of Rust remover Rebakens of FOSROC (coverage - 2.0 - 2.5 Sqm/ltr) or equivalent of Dr FIXIT/BASF/PIDITILE incl clening the rebars which has not lost their life properly with mechanical means to remove the loose rust and to achieve complete removal of dust before the application of REBAKELNS
Supply and apply anticorrosive treatment to reinforcement by applying zinc Rich apoxy based protective coating with Zinc Rich epoxy coating like Nitozinc Primer STD of Fosroc or equivalent of Dr. Fixit/BASF/PIDILITE on the dry Surface of the rebars (existing and additional rebarbs if provided). Application of the products shall be by manufacturer's authorised applicator and as per manufacturer's specifications.
M&L for applying Nito Zinc primer over RCC surfaces @ 0.20 Ltr/Sqm complete all as specified. Note:- The scope of work against item Ser No 49.00 to 54.00 shall be executed through authorised applicater of the manufactures.
S&F rolled mild steel of Fe 410-W (Gde?E- 250) quality A stairs (framed) including stringers, treades, landing, balusters, hand rails etc. in?cluding cleats, brackets, etc. complete all as specified .
Demoliton of cement concrete of any description & in any position not otherwise specifically provided complete all as specified.
M&L average 40 mm thick cement concrete 1:2:4 mix type B-0 (12.5 mm graded stone aggregate) in roof as padding finishing surface of concrete topping even and fair (without using extra cement) including cutting of grooves in panel n.exec 4.00 sqm each on PCC padding and including filling with bituminus fillar complete all as specified
M&L for 10mm thick plastering in CM(1:3) on concrete roof surfaces with water proofing compound @ 3% by weight of cement and finishing the surface even and fair without using extra cement including taking down existing plaster and APP membrane complete all as specified. Note :- WPC shall be measured and paid separately.
M & L painting roof surfaces with one coat of bitumen primer T-10/ polymerised grade conforming to IS-3384 @ 0.30kg /Sqm and one coat of bonding material using blown type bitumen confirming to IS-702 grade 85/25 @ 1.20 Kg/Sqm laying of 3mm thick APP membrance weight not less than 3.50 Kg/Sqm with 10cm side overlap having centre core of 100 micron HMHDPE, outer film is 20 micron each and applying one coat of bonding material using blown type bitumen confirming to IS-702 of grade 85/25 @ 1.20 Kg/Sqm over APP membrane complete all as specified.
M/S PIYUSH CONSTRUCTION COMPANY
Bhawani Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .