Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹6.8 LAccepted-AOC | ₹6.8 L | L-1 | Accepted-AOC Tender accepted due to lowest and quoted reasonable rates |
| 2 | L-2₹7.8 L+₹95,309 (14.0%)Rejected-Finance HOUSE NO 102 LANE NO 4 C ANAND NAGAR BOHRI JAMMU 180002 J K | JAMMU | JAMMU AND KASHMIR | 180002 | ₹7.8 L+₹95,309 (14.0%) | L-2 | Rejected-Finance Higher side quoted amount |
| 3 | L-3₹8.7 L+₹1.9 L (28.0%)Rejected-Finance | ₹8.7 L+₹1.9 L (28.0%) | L-3 | Rejected-Finance Higher side quoted amount |
| 4 | L-4₹8.9 L+₹2.1 L (30.3%)Rejected-Finance H NO 01 MADINA BAGH MEHJOOR NAGAR NEAR HOTEL RAFADA SRINAGAR 190015 J K | BUDGAM | JAMMU AND KASHMIR | 190015 | ₹8.9 L+₹2.1 L (30.3%) | L-4 | Rejected-Finance Higher side quoted amount |
| 5 | L-5₹9.0 L+₹2.2 L (32.7%)Rejected-Finance 361 BEHIND DAV SCHOOL JAWAHAR NAGAR SRINAGAR 190008 | SRINAGAR | JAMMU AND KASHMIR | 190008 | ₹9.0 L+₹2.2 L (32.7%) | L-5 | Rejected-Finance Higher side quoted amount |
Tender Value
Refer Docs
EMD Value
₹46,000
Closing Date
15 Apr 2023, 6:00 pmClosed
CWE Khumbathang
CWE Khumbathang
REPAIR AND MAINT OF INTERNAL ELECTRIFICATION AND ALLIED WORKS IN VARIOUS UNIT AT THASGAM UNDER GE KARGIL
2023_MES_586418_1
80051/164/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
Kargil
As per tender and NIT doc
8 documents required · 8 mandatory
₹500
GE Kargil
₹46,000
6 May 2023
20 Mar 2023
17 Apr 2023
20 Mar 2023
15 Apr 2023
3 Apr 2023
Amount
Taking down carefully copper or aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, sockets bulk, head fitting, tube light fitting by unscrewing carefully from boards etc and making good, distrubed surface of walls floors etc.
M&L for Point wiring with multi-stranded copper conductor PVC insulated and unsheathed cable in PVC casing and capping, 1.5 Sqmm with all fittings/accessories and including 1.5 Sqmm PVC insulated copper earth wire connected to common earth including closed recessed wooden terminal Boxes of suitable size made of 2nd class hard wood for mounting switches, sockets etc with 3mm thick laminated sheet cover for one light point or bell/buzzer point controlled by one switch, complete.
All as per Srl item No 02 here in before but for one 3 pin 5 Amps switch socket on same board.
All as per Srl item No 02 here in before but for one 3 pin socket outlet 5 Amps on independent board.
All as per item No 2 here-in-before but for point wiring for power point with 2.5 Sqmm FRLS PVC insulated unsheathed copper cable 1100 Volt grade drawn through and including PVC casing caping heavy duty ISI marked /heavy duty conduit ISI marked as required at site alongwith accessories with 2.5 Sq mm FRLS PVC insulated unsheathed copper conductor cable as earthing and connected to common earth all as specified.
S&F Switch piano flush type 5 Amps, single pole one way.
S&F Switch socket combination 2 in 1, and 3 and 2 pin, 5 Amps flush type.
S&F Switch socket combination 2 in 1, 5 and 15 Amps flush type.
S&F wall mounted LED light fitting 1x18 watts AC decorative box type with driver holder including LED tube light , energy efficient type 4 feet long including neccessary conection prewired and making connection with 3 core copper flexible cable of appropriate size from ceilling rose.
S&F in Ceiling rose surface bakelite 65x50mm, two to three terminals.
S&F Bell push, flush type, 5 Amp
S&F Electronic Ding Dong Bell, AC 240 volts single pole, complete all as specified.
S&F in replacement Switch piano flush type 5 Amps, single pole one way.
S&F in replacement Switch socket combination 2 in 1, and 3 and 2 pin, 5 Amps flush type.
S&F in replacement Switch socket combination 2 in 1, 5 and 15 Amps flush type.
S&F in replacement Lamp holder, insulated body with back plate suitable for batten fittings
S&F in replacement Ceiling rose surface bakelite 65x50mm, two to three terminals.
S&F in replacement Modular socket 6A-2/3 pin combined 2 module
S&F in replacement Modular socket 6A/16 A -2/3 pin combined 2 module
S&F in replacement Modular switch 1 way 6A, 1 module
S&F in replacement Modular switch 1 way 16A, 1 module
S&F in replacement LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.
S&F in replacement plug top 15 Amp 230 Volt AC.
S&F in replacement Sheet metal enclosure for DB's Single door, single pole and neutral, 240V, 8 way with 200 Amp rated bus bar including blanking plates where required. Complete all as specified and directed.
S&F in replacement Sheet metal enclosure for DB's single door, single pole and neutral, 240V, 4 way with 200 Amp rated bus bar including blanking plates where required, complete all as specified and directed.
S&F in replacement Sheet metal enclosure for DB's single door, single pole and neutral, 240V, 2 way including blanking plates where required, complete all as specified and directed.
S&F in replacement 240 V 10 KA C curve miniature circuit breaker (MCB) SPN 40 to 63 Amp in the MCB DB complete with connection testing and commissioning.
S&F in replacement 240 V 10 KA C curve miniature circuit breaker (MCB) SPN 32 Amp in the MCB DB complete with connection testing and commissioning.
S&F in replacement 240 V 10 KA C curve miniature circuit breaker (MCB) SP 5 to 32 Amp in the MCB DB complete with connection testing and commissioning.
S&F in repair PVC rectangular block for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover of size 200x150x50 mm deep
M&L for House Service bracket (hook type) complete with 3.0 m long G.I pipe 40 mm dia (medium grade), two numbers 90° bends, M.S hook and stay including taking down the existing unserviceable bracket. NOTE :- The unit rate shall to include for :- (a) Cutting holes in walls etc. of any description, grouting rag bolts and making good with cement mortar 1:3 including making good finishing to match the existing work and removing rubbish off the premises as directed (in case of bracket being fixed to masonry wall). (b) G.I pipe house service bracket hook type fabricated out of 3.0m long screwed G.I pipe of medium grade and comprising of two number 90° bend (pipe dia) screwed tight to the top ends of the service vertical limb, the two ends of the service provided with two number of turned spit tight fit, well seasoned teak wood bushing and the bracket fixed plumb vertical against the wall with two number flat iron clamps (fabricated out of 50 x 6mm flat iron with 4 No. 16 mm dia ragged bolts of appropriate size with screwed ends, tightened with 16 mm dia nuts with 6 mm thick washer against the clamp tightening collar.
S&f in replacement two single core 4 sq mm for sub Main wiring with copper conductor multistranded PVC insulated and unsheathed 1100Volts grade in and including PVC casing capping/ pvc conduit with fixing accessories including one run of 4.0 Sq mm copper conductor. complete including taking out of existing wiring all as specified (Note - Two runs of 04 Sq mm cable, one run of 4.0 Sq mm earth cable and one run of PVC casing Capping shall be measured as one running meter.)
S&f in replacement two single core 6 sq mm for Sub Main wiring with copper conductor multistranded PVC insulated and unsheathed 1100Volts grade in and including PVC casing capping/ pvc conduit with fixing accessories including one run of 6 Sq mm copper conductor.complete including taking out of existing wiring all as specified (Note - Two runs of 06 Sq mm cable, one run of 6 Sq mm earth cable and one run of PVC casing Capping shall be measured as one running meter.)
Dismentling of existing earthing and replacemet of Earthing complete with galvanised steel earth plate electrode 600mm x 600mm and 6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connected to the Galvanized iron earth wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel as shown in electrical plate No. 3 conected to earth test point as specified or indicated including testing on completion.
S&F in replacement1100 volts grade heavy duty 6 sqmm 2 core flat cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 01 metre apart including 4 mm suspension complete all as specified.
S&F in replacement 1100 volts grade heavy duty 10 sqmm 2 core flat cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 01 metre apart including 4 mm suspension complete all as specified.
Supply and fixing in replacement LED bulb 9 watt, 230 volts.
S&F in repair wall mounted LED light fitting 1x18 watts AC decorative box type with driver holder including LED tube light , energy efficient type 4 feet long including neccessary conection prewired and making connection with 3 core copper flexible cable of appropriate size from ceilling rose.
S&F in replacement round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.
S&F in replacement LED recess swivel down light fitting 3 Watt 3000 K complete all as specified.
S&F in replacement LED light fitting 1x9W/1x10W bulkhead luminaries including LED light driver holder connecting up three core flexible copper conductor cable of suitable size.
Supply and fixing in replacement square shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.
Supply and fixing in replacement LED luminarie 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete 6000K/3000K with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.
S&F in replacement 3 Phase ON LOAD change over switch with side handle in sheet metal enclosure 4 pole of capacity 63 A.
Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 34,098.00 and any other reduction if any from quoted amount.
SUMEET TRADING CORPORATION
Ms Salaria Builders
M/S BALI CONSTRUCTIONS
M/S TRADE LINK
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .