KIIFB-Construction of Regulator Cum Bridge at Kankakkadavu across Bharatappuzha in Kuttippuram Panchayat, Malappuram District Deposit work - Utility shifting of pipeline in Anakkara Pt -Pipeline Work

cost of materials

OD129300/2024-2025:Supply of 100mm GI pipe Medium

100.98.224:Supply of PVC Pipe, 8kg/cm2, 110mm Dia.

100.98.220:Supply of PVC Pipe, 8kg/cm2, 50mm Dia.

100.98.223:Supply of PVC Pipe, 8kg/cm2, 90mm Dia.

OD180327/2024-2025:Cost of Specials for 100 mm GI pipe (M) (5% cost of pipe)

OD181190/2024-2025:Cost of 110 mm PVC pipe 8 kg/cm2 specials (3% of cost of pipes)

OD90205/2025-2026:Cost of 90mm PVC 8kg/cm2 specials (3% cost of pipes)

OD90219/2025-2026:Cost of specials for 50mm PVC Pipe (3% cost of pipes)

100.98.458:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 100mm.

100.98.440:Supply of CI Air Valve, Conforming to IS 14848 - 2000, Single Orifice, Small Orifice Type S1, Size 25mm.

100.98.457:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 80mm.

Working Charges

100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.

100.1.5:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50 m, in Ordinary Rock.

100.8.1:Fencing one side of trenches, 1.50m height with two rows of 10cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2m intervals.

100.9.9:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 110 mm nominal outside diameter pipes.

100.9.5:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 50 mm nominal outside diameter pipes.

100.9.8:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 90 mm nominal outside diameter pipes.

100.12.9:Conveying and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc., but excluding cost of pipes and fittings for External work: 100mm diameter nominal bore.

18.12.8:Providing and fixing G.I. pipes complete with G.I fittings including trenching and refilling etc. External work80 mm dia nominal bore

18.17.6:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :80 mm nominal bore

100.31.1.2:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 100mm diameter, Class I.

OD137408/2024-2025:Cutting 100 mm (ID) GI Pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc

OD90264/2025-2026:Welding 80 mm (ID) G.I. pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc. complete: as per directions.

OD90265/2025-2026:Cutting 80 mm (ID) G.I. pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc. complete: as per directions.

OD137414/2024-2025:Welding 100mm (ID) GI pipes for making bends and other specials by gas cutting including cost of gas,all labour and hire charges of tools etc

100.37.5.2:Fabricating M.S. flanges of diameter 100mm using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.32.1:Conveying and fixing C. I. Single Acting Air Valve of approved quality with bolts, nuts, rubber insertions etc., complete, but excluding the cost of air valve (tail pieces, if required, will be paid separately): 25mm Single Acting Air Valve.

100.31.1.1:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 80mm diameter, Class I.

OD133657/2024-2025:Interconnecting the existing 50 m.m to 110 PVC pipe line /40 m.m to 100 GI/90mm to 110mm HDPE pipe line with newly laid 90 to 160 PVC pipe line with Tee and suitable specials required for the inter connection

OD137554/2024-2025:Providing and fixing MS bracket for supporting GI pipes in the retaining wall side by using ISA 50x50x8mm bolted to the retaining wall and pipe shall be clamped to the bracket by using U Bolt, etc complete to the satisfaction of the Engineer In -charge

100.60.8.1:Replacing the chocked / damaged 15mm (1/2 inch) house connection with 15mm (1/2 inch) water meter from existing mains, up to a length of 5m using 20mm Indian Standard Class 6 uPVC pipe and uPVC / Brass specials viz. brass ferrule, Elbow, MTA, FTA, couplers etc. and connecting with the mains, testing the joints etc. complete including trenching and refilling in all kinds of soil up to a depth of 1.50m for main line tracing and trench of average cross section 0.3m x 0.75m for laying connection pipe and service pipe, safely removing & re-fixing existing water meter, lighting, watching, providing caution boards, traffic control etc. complete including cost of materials, hire for tools, cost of consumables and labour charges but excluding cost of water meter and meter box and excluding charges for cutting the concrete / tarred / bituminous roads and as per the directions of the department officers

Please Enable Macros to View BoQ information