Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.9 LAccepted-AOC | ₹7.9 L | L1 | Accepted-AOC Lowest |
| 2 | L2₹7.7 L−₹19,994.93 (2.53%)Rejected-AOC | ₹7.7 L−₹19,994.93 (2.53%) | L2 | Rejected-AOC Second Lowest |
| Sl No | Description | Qty | Unit | azahrudeen L1 | Ezhukone LCCS Ltd No Q1495 L2 |
|---|---|---|---|---|---|
| 1.00Detailed estimate | |||||
| 1.00 | 15.41:Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. | 30.01 | sqm | 53 ₹1,590.69 Lowest | 55 ₹1,650.72 |
| 1.00 | 15.36:Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. | 30 | kg | 35 ₹1,050 Lowest | 36 ₹1,080 |
| 1.00 | 50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete | 2.66 | cum | 7,120 ₹18,946.32 Lowest | 7,296 ₹19,414.66 |
| 1.00 | 13.4.2:12 mm cement plaster of mix:1:6 ( 1 cement : 6 coarse sand) | 36.59 | sqm | 340 ₹12,440.6 Lowest | 349 ₹12,769.91 |
| 1.00 | 9.156.1:Providing and fixing Pre-laminated medium density fibre board exterior grade (Grade-I) IS:14587:1998 marked, to backing or studding with screws etc. complete (Frames, backing or studding to be paid separately).Pre-laminated with decorative lamination on both side exterior Grade -I MDF Board 12 mm thick confirming to IS:14587. | 32.14 | sqm | 1,066 ₹34,261.24 Lowest | 1,093 ₹35,129.02 |
| 1.01 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 424.47 | kg | 539 ₹2,28,790.95 Lowest | 552 ₹2,34,309.1 |
| 1.01 | 21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) | 12.89 | kg | 653 ₹8,417.17 Lowest | 670 ₹8,636.3 |
| 1.01 | 21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides | 153.91 | sqm | 1,100 ₹1,69,306.5 Lowest | 1,128 ₹1,73,616.12 |
| 1.01 | 21.3.2:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm) | 15.04 | sqm | 1,534 ₹23,071.36 Lowest | 1,572 ₹23,642.88 |
Tender Value
₹8.4 L
EMD Value
₹20,882
Closing Date
7 Aug 2026, 5:00 pmClosed
Assistant Executive Engineer
Assistant Executive Engineer, Buildings Sub division, kollam
DEPOSIT Renovation of new office space at Civil Station for Kudumbasree District Mission Kollam General Civil Work
2026_PWD_862856_1
ET-30/AEE/KLM/2026-2027
Open Tender
Civil Works - Buildings
Item Rate
180 days
Kollam
Please refer Tender documents.
9 documents required · 9 mandatory
₹1,845
Yes
₹20,882
Yes
17 Sept 2026
28 Jul 2026
11 Aug 2026
28 Jul 2026
7 Aug 2026
28 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Detailed estimate | |||||
| 1.001 | 15.41:Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. | - | sqm | - | - |
| 1.002 | 15.36:Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. | - | kg | - | - |
| 1.003 | 50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete | - | cum | - | - |
| 1.004 | 13.4.2:12 mm cement plaster of mix:1:6 ( 1 cement : 6 coarse sand) | - | sqm | - | - |
| 1.005 | 9.156.1:Providing and fixing Pre-laminated medium density fibre board exterior grade (Grade-I) IS:14587:1998 marked, to backing or studding with screws etc. complete (Frames, backing or studding to be paid separately).Pre-laminated with decorative lamination on both side exterior Grade -I MDF Board 12 mm thick confirming to IS:14587. | - | sqm | - | - |
| 1.006 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 0.2 | kg | - | - |
| 1.007 | 21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) | - | kg | - | - |
| 1.008 | 21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides | 1 | sqm | - | - |
| 1.009 | 21.3.2:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm) | 1 | sqm | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1459453.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.05 MB
bid.pdf
Tender Documents • 1.67 MB
BOQ_1459453.xls
BOQ • 0.25 MB
affidavit.pdf
Other Document • 0.26 MB
epayment.pdf
Additional Documents • 0.07 MB
Formoftender.pdf
Other Document • 0.76 MB
preliminary.pdf
Additional Documents • 0.35 MB
integritycertifcte.pdf
Additional Documents • 0.14 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .