Construction of Market Complex at Attabira NAC

Earth work in excavation, loading, up loading and carriage by "Mechanical means" of all kinds of soil including stoney earth, gravels and murrom etc. interspread with boulders upto 1/2 cum size with all lifts and delifts including trimming of slopes and bed to design section and depositing the excavated materials away from work site as per the specifications and as directed by the Engineer in charge within an initial lead of 1 km from the place of excavation complete.

Carriage of Excavated earth upto 5km Including cost of all labour wirh T & P required for the work etc, all complete in all respect as per the Direction of the Engineer in charge.

Supply & filling in foundation and plinth with course river sand including watering and ramming cost conveyances, royalties & taxes of all materials & cost of all labour with T & P required for the work etc. all complete in all respect as per the Direction of the Engineer in charge.

Cement concrete (1:3:6) in foundation and floors using 40 mm.size hard Crusher broken granite stone metal of approved quality & from approved quarry including lowering, laying the concrete, watering and curing complete to required levels laid in layers including cost conveyance, royalties & taxes of all materials & cost of all labour with T & P required for the work etc all complete in all respect as per Direction of the Engineer in charge.

Fly Ash. Brick masonry using Fly Ash. Bricks having crushing strength not less than 75Kg. / cm2 in cement mortar (1:6) after immersing the brick for six hours in water before use in "Foundation & Plinth" including splays, cutting circular moulding, corbelling, chamfering and similar such type of works, watering & curing including cost, conveyances, royalties taxes of all materials and cost of all labour with T&P required for the work etc. all complete in all respect as per the Direction of Engineer in charge.

Fly Ash. Brick masonry using Fly Ash. Bricks having crushing strength not less than 75Kg. / cm2 in cement mortar (1:6) after immersing the brick for six hours in water before use in "superstructure" including splays, cutting circular moulding, corbelling, chamfering and similar such type of works, watering & curing including cost, conveyances, royalties taxes of all materials and cost of all labour with T&P required for the work etc. all complete in all respect as per the Direction of Engineer in charge.

Fly Ash. Brick masonry using Fly Ash. Bricks having crushing strength not less than 75 Kg. / cm2 in cement mortar (1:4) after immersing the brick for six hours in water before use in "superstructure" including splays, cutting circular moulding, corbelling, chamfering and similar such type of works, watering & curing including cost, conveyances, royalties taxes of all materials and cost of all labour with T & P required for the work etc. all complete in all respect as per the Direction of Engineer in charge.

R.C.C. works (M-20) in foundation, footing, beams,plinth band,footing,base of columns,lintels, roofs, chhajas mass concrete etc. using 10 mm & 20 mm size black hard granite crusher broken chips including hoisting, lowering, laying and compacting, watering, curing for 28 days including centering and shuttering and finished the exposed surface smooth including all cost, conveyances, royalties and taxes of all materials and cost of labour with T & P required for the work etc. all complete in all respect but excluding cost of Steel and labour charges for bending and binding as per the Direction of the Engineer in charge.Lintel Band:

Plinth Band:

All kinds of Beams & Columns:

Roof slab, Landing, Balcony & Chajjas:

Staircase excluding Landing:

Foundation,Footing Base of Columns:

Cutting ,Straightening coiled or bent up TOR steel (SAIL Make) bending, binding, welding and jointing if necessary and tying the grills and placing in position including cost of binding wire 18 to 20 gauge as required for R.C.C. works and providing fan hooks ,hoisting,lowering, and laying the grills in floors and others etc.including cost of steel ,conveyances, labour,royalities, taxes with T & P etc.all complete in all respect as per the Direction of the Engineer in charge.

16mm (5/8") thick cement plaster (1:6) over brick walls in all floors after racking out joints including watering & curing etc. complete with cost, conveyance royalties & taxes of all materials & cost of all labour with T & P required for the work etc. all complete in all respect as per the Direction of the Engineer in charge.

12mm (1/2") thick cement plaster (1:6) over brick massonary after racking out the joints watering and curing etc. complete with cost, conveyance royalties and taxes of all materials & all labour with T & P required for the work etc. all complete in all respect as per the Direction of the Engineer in charge.

6 mm thick cement plaster (1:4) to R.C.C. Surfaces finished smooth including closed deep chipping and slurry treatment to Ceiling including watering and curing complete with cost, conveyance, royalties, and taxes of all materials and cost of all labour with T & P required for the work etc. all complete in all respect as per the Direction of the Engineer in charge.

Providing & fixing Tiles in Floors, steps, landings etc. on 25 mm thick bed of cement mortar 1:1 jointed with neat cement slurry mixed with pigment to match the shades of the Tiles including rubbing & pulishing etc. all complete including cost of materials,labour,T & P,royality,taxes etc. all complete in all respect as per the Direction of the Engineer in charge. Kota Stone

Providing & fixing Tiles in Dados / skirting etc. on 12 mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost of all materials, labour,T & P, royality,taxes etc. all complete in all respect as per the Direction of the Engineer in charge. Kota Stone

Providing & fixing Vitrified Tiles & Ceramic Glazed Tiles in Floors, steps, landings and Dados /Skirtings etc. on 20 mm joints with white cement of approved quality including all complete including cost of materials,labour,T & P,royality,taxes etc. required in all respect as per the Direction of the Engineer in charge. Ceramic Glazed Floor Tile:

Ceramic Glazed Wall Tile:

25mm (0'-1") thick A. S. Flooring with cement concrete of Proportion (1:2:4) with black hard crusher broken 12 mm size granite stone chips of approved quality & from approved quarry in Floors and after chipping & clearing the top of floors slabs in upper floors laid to proper slopes including punning, rounding of corner watering & curing with cost, conveyances, royalties & taxes of all materials and cost of all labour with T&P required for the work etc. complete in all respect as per the Direction of the Engineer in charge.

12mm (1/2") thick cement plaster (1:4) over brick work with neat cement punning in dados/skirting including watering and curing complete with cost, conveyance, royalties, and taxes of all materials and cost of all labour with T&P. required for the work etc. all complete in all respect as per the Direction of the Engineer in charge.

Wall Painting two Coats with Plastic Emulsion Paint of approved shade on new work to give an even shade including cost,conveyence and taxes all materials including cost of all labour and T & P etc.required for new work complete in all respect as per the Direction of the Engineer in charge.

Painting Two coats to Outside Surface of Walls etc.of Approved Shade & color using Weather Coat to the surface of Walls after cleaning the surface including cost,conveyence and taxes all materials including cost of all labour and T & P etc.required for the work complete in all respect as per the direction of the Engineer in Charge.

Finishing suface of Walls with Cement based wall Putty (Water based) of approved make and fiinished smooth and even suface to recive painting including cost of scaffolding staging charges with cost of all materials taxes,labour T & P etc complete.

Painting one coat with any approved Cement primer (Water Bound) to after cleaning the surface including watering & curing etc. complete including cost, conveyance, and taxes of all materials including cost of cement primer, labour & T & P etc. required for the work all complete in all respect as per the Direction of the Engineer in charge.

Supplying, fitting, fixing up window (sliding type) made up Aluminum section 9778 as window frame,section no.4095,4096 & 9777,3994 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangements including all fitting all cost of labour,T & P required for the work all complete in all respect as per the Direction of the Engineer in Charge.

Supplying and Fixing Rolling Shutters of Approved make,made of required size M.S. laths inter locked together through their entire length and jointed together at the end by end locks mounted on specially designed pipes shaft with brackets,side guides and arrangements for inside and out side locking with push and pull operation complete including the cost of providing and fixing necessary 27.5 cm long wire springs grade no.2 and M.S. top cover of required thickness for rolling shutters all complete in all respect as per the direction of the Engineer in charge.(80x1.25 mm M.S. Laths with 1.25 mm thick top cover.) including Providing and Fixing Ball Bearing for Rolling Shutters as required including all cost, conveyance, taxes, labour T & P required for the work all complete in all respect as per the direction of the Engineer in Charge.

Providing, fitting and fixing T-Iron frame for doors , windows, shutters, frame & Grill with sheet of mild steel Tee sections, jointes, mitered and welded with 15x3 mm lugs embedded in cement concrete blocks 15x10x10 cm in CM 1:3:6 with wooden plugs,screws or with rawl plugs and screws with fixing clips, bolts and nuts as required including fixing of necessary butt hinges and screws and applying priming coat of approved steel primer including all cost, conveyances, royalities, taxes, labour, T&P required for the work all complete in all respect as per the Direction of the Engineer in charge.

Painting two coats of Enamel paints to Iron work including sand papering & polishing the surface with cost, conveyance and taxes of all materials labour & T & P required for the work etc. complete in all respect as per the Direction of the Engineer in charge.

Providing, fitting, fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipes with Balustrade of size 32mmx32mmx2mm @ 0.90 mtrs.C/C and stainless square pipe bracing of size 32mmx32mmx2mm in three rows in stair case as per approved design & specifications, buffing, polishing etc. with cost, conveyance, taxes of all materials, labour, T & P required for the work, all complete in all respect as per the direction of the Engineer in Charge.

Providing Fitting & Fixing Bitumenous Expansion Joint Boards (I.S.I.) in Expansion Joints including cost of all materials,conveyance,taxes,labour, T & P required for the work all complete in all respect as per the Direction of the Engineer in charge.

Anti Termite Treatment: Diluting & Injecting Chemical Emulsion (Chlorpyriphus Emulsifiable concentrate 20% with 1% concentration) for "Pre-Construction Anti-Termite Treatment" & creating a continues chemical barrier & around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of walls & floors along external perimeter of building, expansion joint, over the top surface of consolidated earth on which apron is to be laid, surroundings of pipes & conduits etc. Complete including cost of all materials, labour, taxes etc. in all respect as per the Direction of the Engineer in charge.

Fly Ash. Brick masonry using Fly Ash. Bricks having crushing strength not less than 75Kg. / cm2 in cement mortar (1:6) after immersing the brick for six hours in water before use in "superstructure" including splays, cutting circular moulding, corbelling, chamfering and similar such type of works, watering & curing including cost, conveyances, royalties taxes of all materials and cost of all labour with T&P required for the work etc. all complete in all respect as per the Direction of Engineer in charge.

Fly Ash. Brick masonry using Fly Ash. Bricks having crushing strength not less than 75 Kg. / cm2 in cement mortar (1:4) after immersing the brick for six hours in water before use in "superstructure" including splays, cutting circular moulding, corbelling, chamfering and similar such type of works, watering & curing including cost, conveyances, royalties taxes of all materials and cost of all labour with T & P required for the work etc. all complete in all respect as per the Direction of Engineer in charge.

R.C.C. works (M-20) in foundation, footing, beams,plinth band,footing,base of columns,lintels, roofs, chhajas mass concrete etc. using 10 mm & 20 mm size black hard granite crusher broken chips including hoisting, lowering, laying and compacting, watering, curing for 28 days including centering and shuttering and finished the exposed surface smooth including all cost, conveyances, royalties and taxes of all materials and cost of labour with T & P required for the work etc. all complete in all respect but excluding cost of Steel and labour charges for bending and binding as per the Direction of the Engineer in charge. Lintel Band:

All kinds of Beams & Columns:

Roof slab, Landing, Balcony & Chajjas:Single Stage

Roof slab, Landing, Balcony & Chajjas: Double Stage

Staircase excluding Landing:

Cutting ,Straightening coiled or bent up TOR steel (SAIL Make) bending, binding, welding and jointing if necessary and tying the grills and placing in position including cost of binding wire 18 to 20 gauge as required for R.C.C. works and providing fan hooks ,hoisting,lowering, and laying the grills in floors and others etc.including cost of steel ,conveyances, labour,royalities, taxes with T & P etc.all complete in all respect as per the Direction of the Engineer in charge.

16mm (5/8") thick cement plaster (1:6) over brick walls in all floors after racking out joints including watering & curing etc. complete with cost, conveyance royalties & taxes of all materials & cost of all labour with T & P required for the work etc. all complete in all respect as per the Direction of the Engineer in charge.

12mm (1/2") thick cement plaster (1:6) over brick massonary after racking out the joints watering and curing etc. complete with cost, conveyance royalties and taxes of all materials & all labour with T & P required for the work etc. all complete in all respect as per the Direction of the Engineer in charge.

6 mm thick cement plaster (1:4) to R.C.C. Surfaces finished smooth including closed deep chipping and slurry treatment to Ceiling including watering and curing complete with cost, conveyance, royalties, and taxes of all materials and cost of all labour with T & P required for the work etc. all complete in all respect as per the Direction of the Engineer in charge.

Providing & fixing Tiles in Floors, steps, landings etc. on 25 mm thick bed of cement mortar 1:1 jointed with neat cement slurry mixed with pigment to match the shades of the Tiles including rubbing & pulishing etc. all complete including cost of materials,labour,T & P,royality,taxes etc. all complete in all respect as per the Direction of the Engineer in charge. Kota Stone

Providing & fixing Tiles in Dados / skirting etc. on 12 mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost of all materials, labour,T & P, royality,taxes etc. all complete in all respect as per the Direction of the Engineer in charge. Kota Stone

Providing & fixing Vitrified Tiles & Ceramic Glazed Tiles in Floors, steps, landings and Dados /Skirtings etc. on 20 mm joints with white cement of approved quality including all complete including cost of materials,labour,T & P,royality,taxes etc. required in all respect as per the Direction of the Engineer in charge. Ceramic Glazed Floor Tile:

Ceramic Glazed Wall Tile:

Wall Painting two Coats with Plastic Emulsion Paint of approved shade on new work to give an even shade including cost,conveyence and taxes all materials including cost of all labour and T & P etc.required for new work complete in all respect as per the Direction of the Engineer in charge.

Painting Two coats to Outside Surface of Walls etc.of Approved Shade & color using Weather Coat to the surface of Walls after cleaning the surface including cost,conveyence and taxes all materials including cost of all labour and T & P etc.required for the work complete in all respect as per the direction of the Engineer in Charge.

Finishing suface of Walls with Cement based wall Putty (Water based) of approved make and fiinished smooth and even suface to recive painting including cost of scaffolding staging charges with cost of all materials taxes,labour T & P etc complete.Internal

External

Painting one coat with any approved Cement primer (Water Bound) to after cleaning the surface including watering & curing etc. complete including cost, conveyance, and taxes of all materials including cost of cement primer, labour & T & P etc. required for the work all complete in all respect as per the Direction of the Engineer in charge.Internal

External

Supplying, fitting, fixing up window (sliding type) made up Aluminum section 9778 as window frame,section no.4095,4096 & 9777,3994 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangements including all fitting all cost of labour,T & P required for the work all complete in all respect as per the Direction of the Engineer in Charge.

Supplying and Fixing Rolling Shutters of Approved make,made of required size M.S. laths inter locked together through their entire length and jointed together at the end by end locks mounted on specially designed pipes shaft with brackets,side guides and arrangements for inside and out side locking with push and pull operation complete including the cost of providing and fixing necessary 27.5 cm long wire springs grade no.2 and M.S. top cover of required thickness for rolling shutters all complete in all respect as per the direction of the Engineer in charge.(80x1.25 mm M.S. Laths with 1.25 mm thick top cover.) including Providing and Fixing Ball Bearing for Rolling Shutters as required including all cost, conveyance, taxes, labour T & P required for the work all complete in all respect as per the direction of the Engineer in Charge.

Providing, fitting and fixing T-Iron frame for doors , windows, shutters, frame & Grill with sheet of mild steel Tee sections, jointes, mitered and welded with 15x3 mm lugs embedded in cement concrete blocks 15x10x10 cm in CM 1:3:6 with wooden plugs,screws or with rawl plugs and screws with fixing clips, bolts and nuts as required including fixing of necessary butt hinges and screws and applying priming coat of approved steel primer including all cost, conveyances, royalities, taxes, labour, T&P required for the work all complete in all respect as per the Direction of the Engineer in charge.

Painting two coats of Enamel paints to Iron work including sand papering & polishing the surface with cost, conveyance and taxes of all materials labour & T & P required for the work etc. complete in all respect as per the Direction of the Engineer in charge.

Providing, fitting, fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipes with Balustrade of size 32mmx32mmx2mm @ 0.90 mtrs.C/C and stainless square pipe bracing of size 32mmx32mmx2mm in three rows in stair case as per approved design & specifications, buffing, polishing etc. with cost, conveyance, taxes of all materials, labour, T & P required for the work, all complete in all respect as per the direction of the Engineer in Charge.

Providing 2.5 cm thick Grading Concrete (1:2:2) on roof slab with required slope with 6 mm size hard granite chips including cost,conveyance, taxes, labour T&P required for the work all complete in all respect as per the Direction of the Engineer in charge.

Providing Fitting & Fixing Bitumenous Expansion Joint Boards (I.S.I.) in Expansion Joints including cost of all materials,conveyance,taxes,labour, T & P required for the work all complete in all respect as per the Direction of the Engineer in charge.

Fly Ash. Brick masonry using Fly Ash. Bricks having crushing strength not less than 75Kg. / cm2 in cement mortar (1:6) after immersing the brick for six hours in water before use in "superstructure" including splays, cutting circular moulding, corbelling, chamfering and similar such type of works, watering & curing including cost, conveyances, royalties taxes of all materials and cost of all labour with T&P required for the work etc. all complete in all respect as per the Direction of Engineer in charge.

R.C.C. works (M-20) in foundation, footing, beams,plinth band,footing,base of columns,lintels, roofs, chhajas mass concrete etc. using 10 mm & 20 mm size black hard granite crusher broken chips including hoisting, lowering, laying and compacting, watering, curing for 28 days including centering and shuttering and finished the exposed surface smooth including all cost, conveyances, royalties and taxes of all materials and cost of labour with T & P required for the work etc. all complete in all respect but excluding cost of Steel and labour charges for bending and binding as per the Direction of the Engineer in charge. Lintel Band:

All kinds of Beams & Columns:

Roof slab, Landing, Balcony & Chajjas:

Cutting ,Straightening coiled or bent up TOR steel (SAIL Make) bending, binding, welding and jointing if necessary and tying the grills and placing in position including cost of binding wire 18 to 20 gauge as required for R.C.C. works and providing fan hooks ,hoisting,lowering, and laying the grills in floors and others etc.including cost of steel ,conveyances, labour,royalities, taxes with T & P etc.all complete in all respect as per the Direction of the Engineer in charge.

16mm (5/8") thick cement plaster (1:6) over brick walls in all floors after racking out joints including watering & curing etc. complete with cost, conveyance royalties & taxes of all materials & cost of all labour with T & P required for the work etc. all complete in all respect as per the Direction of the Engineer in charge.

12mm (1/2") thick cement plaster (1:6) over brick massonary after racking out the joints watering and curing etc. complete with cost, conveyance royalties and taxes of all materials & all labour with T & P required for the work etc. all complete in all respect as per the Direction of the Engineer in charge.

6 mm thick cement plaster (1:4) to R.C.C. Surfaces finished smooth including closed deep chipping and slurry treatment to Ceiling including watering and curing complete with cost, conveyance, royalties, and taxes of all materials and cost of all labour with T & P required for the work etc. all complete in all respect as per the Direction of the Engineer in charge.

Wall Painting two Coats with Plastic Emulsion Paint of approved shade on new work to give an even shade including cost,conveyence and taxes all materials including cost of all labour and T & P etc.required for new work complete in all respect as per the Direction of the Engineer in charge.

Painting Two coats to Outside Surface of Walls etc.of Approved Shade & color using Weather Coat to the surface of Walls after cleaning the surface including cost,conveyence and taxes all materials including cost of all labour and T & P etc.required for the work complete in all respect as per the direction of the Engineer in Charge.

Finishing suface of Walls with Cement based wall Putty (Water based) of approved make and fiinished smooth and even suface to recive painting including cost of scaffolding staging charges with cost of all materials taxes,labour T & P etc complete.Internal

External

Painting one coat with any approved Cement primer (Water Bound) to after cleaning the surface including watering & curing etc. complete including cost, conveyance, and taxes of all materials including cost of cement primer, labour & T & P etc. required for the work all complete in all respect as per the Direction of the Engineer in charge.Internal

External

Supplying, fitting, fixing up window (sliding type) made up Aluminum section 9778 as window frame,section no.4095,4096 & 9777,3994 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangements including all fitting all cost of labour,T & P required for the work all complete in all respect as per the Direction of the Engineer in Charge.

Providing, fitting and fixing T-Iron frame for doors , windows, shutters, frame & Grill with sheet of mild steel Tee sections, jointes, mitered and welded with 15x3 mm lugs embedded in cement concrete blocks 15x10x10 cm in CM 1:3:6 with wooden plugs,screws or with rawl plugs and screws with fixing clips, bolts and nuts as required including fixing of necessary butt hinges and screws and applying priming coat of approved steel primer including all cost, conveyances, royalities, taxes, labour, T&P required for the work all complete in all respect as per the Direction of the Engineer in charge.

Painting two coats of Enamel paints to Iron work including sand papering & polishing the surface with cost, conveyance and taxes of all materials labour & T & P required for the work etc. complete in all respect as per the Direction of the Engineer in charge.

Providing 2.5 cm thick Grading Concrete (1:2:2) on roof slab with required slope with 6 mm size hard granite chips including cost,conveyance, taxes, labour T&P required for the work all complete in all respect as per the Direction of the Engineer in charge.

Earth work in excavation, loading, up loading and carriage by "Mechanical means" of all kinds of soil including stoney earth, gravels and murrom etc. interspread with boulders upto 1/2 cum size with all lifts and delifts including trimming of slopes and bed to design section and depositing the excavated materials away from work site as per the specifications and as directed by the Engineer in charge within an initial lead of 1 km from the place of excavation complete.

Carriage of Excavated earth upto 5km Including cost of all labour wirh T & P required for the work etc, all complete in all respect as per the Direction of the Engineer in charge.

Supply & filling in foundation and plinth with course river sand including watering and ramming cost conveyances, royalties & taxes of all materials & cost of all labour with T & P required for the work etc. all complete in all respect as per the Direction of the Engineer in charge.

Cement concrete (1:3:6) in foundation and floors using 40 mm.size hard Crusher broken granite stone metal of approved quality & from approved quarry including lowering, laying the concrete, watering and curing complete to required levels laid in layers including cost conveyance, royalties & taxes of all materials & cost of all labour with T & P required for the work etc all complete in all respect as per Direction of the Engineer in charge.

Fly Ash. Brick masonry using Fly Ash. Bricks having crushing strength not less than 75Kg. / cm2 in cement mortar (1:6) after immersing the brick for six hours in water before use in "Foundation & Plinth" including splays, cutting circular moulding, corbelling, chamfering and similar such type of works, watering & curing including cost, conveyances, royalties taxes of all materials and cost of all labour with T&P required for the work etc. all complete in all respect as per the Direction of Engineer in charge.

Fly Ash. Brick masonry using Fly Ash. Bricks having crushing strength not less than 75Kg. / cm2 in cement mortar (1:6) after immersing the brick for six hours in water before use in "superstructure" including splays, cutting circular moulding, corbelling, chamfering and similar such type of works, watering & curing including cost, conveyances, royalties taxes of all materials and cost of all labour with T&P required for the work etc. all complete in all respect as per the Direction of Engineer in charge.

Fly Ash. Brick masonry using Fly Ash. Bricks having crushing strength not less than 75 Kg. / cm2 in cement mortar (1:4) after immersing the brick for six hours in water before use in "superstructure" including splays, cutting circular moulding, corbelling, chamfering and similar such type of works, watering & curing including cost, conveyances, royalties taxes of all materials and cost of all labour with T & P required for the work etc. all complete in all respect as per the Direction of Engineer in charge.

R.C.C. works (M-20) in foundation, footing, beams,plinth band,footing,base of columns,lintels, roofs, chhajas mass concrete etc. using 10 mm & 20 mm size black hard granite crusher broken chips including hoisting, lowering, laying and compacting, watering, curing for 28 days including centering and shuttering and finished the exposed surface smooth including all cost, conveyances, royalties and taxes of all materials and cost of labour with T & P required for the work etc. all complete in all respect but excluding cost of Steel and labour charges for bending and binding as per the Direction of the Engineer in charge. Plinth Band:

All kinds of Beams & Columns:

Roof slab, Landing, Balcony & Chajjas:

Foundation,Footing Base of Columns:

Cutting ,Straightening coiled or bent up TOR steel (SAIL Make) bending, binding, welding and jointing if necessary and tying the grills and placing in position including cost of binding wire 18 to 20 gauge as required for R.C.C. works and providing fan hooks ,hoisting,lowering, and laying the grills in floors and others etc.including cost of steel ,conveyances, labour,royalities, taxes with T & P etc.all complete in all respect as per the Direction of the Engineer in charge.

16mm (5/8") thick cement plaster (1:6) over brick walls in all floors after racking out joints including watering & curing etc. complete with cost, conveyance royalties & taxes of all materials & cost of all labour with T & P required for the work etc. all complete in all respect as per the Direction of the Engineer in charge.

12mm (1/2") thick cement plaster (1:6) over brick massonary after racking out the joints watering and curing etc. complete with cost, conveyance royalties and taxes of all materials & all labour with T & P required for the work etc. all complete in all respect as per the Direction of the Engineer in charge.

6 mm thick cement plaster (1:4) to R.C.C. Surfaces finished smooth including closed deep chipping and slurry treatment to Ceiling including watering and curing complete with cost, conveyance, royalties, and taxes of all materials and cost of all labour with T & P required for the work etc. all complete in all respect as per the Direction of the Engineer in charge.

25mm (0'-1") thick A. S. Flooring with cement concrete of Proportion (1:2:4) with black hard crusher broken 12 mm size granite stone chips of approved quality & from approved quarry in Floors and after chipping & clearing the top of floors slabs in upper floors laid to proper slopes including punning, rounding of corner watering & curing with cost, conveyances, royalties & taxes of all materials and cost of all labour with T&P required for the work etc. complete in all respect as per the Direction of the Engineer in charge.

12mm (1/2") thick cement plaster (1:4) over brick work with neat cement punning in dados/skirting including watering and curing complete with cost, conveyance, royalties, and taxes of all materials and cost of all labour with T&P. required for the work etc. all complete in all respect as per the Direction of the Engineer in charge.

Wall Painting two Coats with Plastic Emulsion Paint of approved shade on new work to give an even shade including cost,conveyence and taxes all materials including cost of all labour and T & P etc.required for new work complete in all respect as per the Direction of the Engineer in charge.

Painting Two coats to Outside Surface of Walls etc.of Approved Shade & color using Weather Coat to the surface of Walls after cleaning the surface including cost,conveyence and taxes all materials including cost of all labour and T & P etc.required for the work complete in all respect as per the direction of the Engineer in Charge.

Finishing suface of Walls with Cement based wall Putty (Water based) of approved make and fiinished smooth and even suface to recive painting including cost of scaffolding staging charges with cost of all materials taxes,labour T & P etc complete.

Painting one coat with any approved Cement primer (Water Bound) to after cleaning the surface including watering & curing etc. complete including cost, conveyance, and taxes of all materials including cost of cement primer, labour & T & P etc. required for the work all complete in all respect as per the Direction of the Engineer in charge.

Supplying, fitting, fixing up window (sliding type) made up Aluminum section 9778 as window frame,section no.4095,4096 & 9777,3994 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangements including all fitting all cost of labour,T & P required for the work all complete in all respect as per the Direction of the Engineer in Charge.

Supplying and Fixing Rolling Shutters of Approved make,made of required size M.S. laths inter locked together through their entire length and jointed together at the end by end locks mounted on specially designed pipes shaft with brackets,side guides and arrangements for inside and out side locking with push and pull operation complete including the cost of providing and fixing necessary 27.5 cm long wire springs grade no.2 and M.S. top cover of required thickness for rolling shutters all complete in all respect as per the direction of the Engineer in charge.(80x1.25 mm M.S. Laths with 1.25 mm thick top cover.) including Providing and Fixing Ball Bearing for Rolling Shutters as required including all cost, conveyance, taxes, labour T & P required for the work all complete in all respect as per the direction of the Engineer in Charge.

Providing, fitting and fixing T-Iron frame for doors , windows, shutters, frame & Grill with sheet of mild steel Tee sections, jointes, mitered and welded with 15x3 mm lugs embedded in cement concrete blocks 15x10x10 cm in CM 1:3:6 with wooden plugs,screws or with rawl plugs and screws with fixing clips, bolts and nuts as required including fixing of necessary butt hinges and screws and applying priming coat of approved steel primer including all cost, conveyances, royalities, taxes, labour, T&P required for the work all complete in all respect as per the Direction of the Engineer in charge.

Painting two coats of Enamel paints to Iron work including sand papering & polishing the surface with cost, conveyance and taxes of all materials labour & T & P required for the work etc. complete in all respect as per the Direction of the Engineer in charge.

Providing 2.5 cm thick Grading Concrete (1:2:2) on roof slab with required slope with 6 mm size hard granite chips including cost,conveyance, taxes, labour T&P required for the work all complete in all respect as per the Direction of the Engineer in charge.

Anti Termite Treatment: Diluting & Injecting Chemical Emulsion (Chlorpyriphus Emulsifiable concentrate 20% with 1% concentration) for "Pre-Construction Anti-Termite Treatment" & creating a continues chemical barrier & around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of walls & floors along external perimeter of building, expansion joint, over the top surface of consolidated earth on which apron is to be laid, surroundings of pipes & conduits etc. Complete including cost of all materials, labour, taxes etc. in all respect as per the Direction of the Engineer in charge.

Earth work in excavation of foundation in Ordinary soil within 50 mts initial lead and 1.5 mts initial lift including rough dressing and breaking of clods to maximum 5 cm to 7 cm and laying in layers not exceeding 0.3 mts in depth etc. all complete in all respect as per the Direction of the Engineer in charge.

Carriage of Excavated earth upto 5km Including cost of all labour wirh T & P required for the work etc, all complete in all respect as per the Direction of the Engineer in charge.

Supply & filling in foundation and plinth with course river sand including watering and ramming cost conveyances, royalties & taxes of all materials & cost of all labour with T & P required for the work etc. all complete in all respect as per the Direction of the Engineer in charge.

Cement concrete (1:3:6) in foundation and floors using 40 mm.size hard Crusher broken granite stone metal of approved quality & from approved quarry including lowering, laying the concrete, watering and curing complete to required levels laid in layers including cost conveyance, royalties & taxes of all materials & cost of all labour with T & P required for the work etc all complete in all respect as per Direction of the Engineer in charge.

Supplying,Fitting & Fixing of 80 mm thick cement concrete Interlocking Paver Block of M-40 grade of approved make,design,colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP-63:2018 as per the Direction of the Engineer in charge.

Fixing water closet (Orissa type ) 500 mm x 440mm size white glazed Vitreous China Orissa Pattern squatting pan conforming to IS:2556,Part.3-2004 duly embeded in cement conrete (1:4:8) all complete as per specification.

Fixing Wash Down water closet (European type W.C. pan) conforming to IS 2556: PART 8-2004 ,to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification:

Fixing Bowl Pattern Urinal conforming to IS 2556: PART 6-1996 including connecting the urinal of 430x260x350mm or 340x410x265mm size respectively with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification:

Fixing glazed earthenware Squatting Plate of size 600mm x 350mm conforming to IS 2556: PART 6-1995 with integral longitudinal Flushing pipe including embedding the plate in 25mm Cement mortar (1:8) laid over 150mm cement concrete (1:4:8) using 40mm hard granite metal all complete as per specification:

Fixing automatic flushing cistern with a pair of Cast Iron or M.S brackets complete with fittings including Cast iron siphonic apparatus, mosquito proof lead, chromium plated brass couplings for connections with inlet, outlet and overflow pipes, making connection with suply main with 12mm dia pvc inlet pipe including cutting holes and making good the same all complete as per specification.

Fixing Vitreous china Flat back wash basin 550x400 mm with hole for pillar taps conforming to IS 2556 : Part 4-2004 with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification

Fixing Bevelled edge mirror of superior glass mounted on 6mm thick AC sheet or ply wood sheetand fixed to wooden plugs with CP brass screws and washers etc complete as per specification.

Fixing standard sized CP brass Towel Rail complete with CP brass brackets fixed to wooden plugs with CP brass screws etc complete as per specification.

Fixing CP brass soap holder complete with CP brass brackets fixed to wooden plugs with CP brass screws etc complete as per specification.

Fixing PVC Waste pipe of the following diameter for Wash Basin and Sink including brass check nut etc complete as per specification.32mm dia

Fixing cp brass Waste coupling of following diameter for wash basin/Sink including brass check nut etc complete as per specification.32mm dia

Providing & fixing in position following approved quality CP fittings / Fixtures of 15 mm nominal dia. with ISI mark / approved make of following type including providing & fixing specials, wall flanges and fixing to concealed / exposed pipe line with leak proof threaded joints using tephlon tapes, testing the joints hydraulically to a pressure of 10 kg./ sq.cm, rectifying the leaky joints. if any, including cleaning etc. complete all as per specifications.

Fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of the following nominal bore as per specification

Fixing15mm dia CP Brass Short Body Bib Cock with long screws, shanks and back nuts of the following nominal bore as per specification

Fixing15mm dia CP Brass long body Bib Cock with long screws, shanks and back nuts of the following nominal bore as per specification

Fixing of 15mm C.P brass Angular Stop Cock conforming to IS781/1995 of following nominal sizes as per specification

Fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin complete as per specification

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge.Concealed work, including cutting chases and making good the wall etc.

20 mm nominal dia

25 mm nominal dia

32 mm nominal dia

40 mm nominal dia

Providing and fixing of Brass or Gun metal Full Way valve conforming to IS :71-1995 of the following nominalsized with wheel as per specification complete.50mm

Fixing Cast iron floor traps of the following nominal diameter of outlet of self cleaning design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors all comlete as per specification

Door bend

Y Junction

O.H.T. 1.Fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of the Engineer in charge

2000 litre capacity Double Layer Cylinderical Vertical water storage tanks (On Second Floor)

Providing and fixing under ground unplasticized rigid PVC soil waste & rain water pipes conforming to IS:13592 Type-A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion single socketed pipes with nails,bobbins and wooden plugs as per specification or laying in trenches including earth work in exavation in all kind of soil & refilling of trenches as er specification.(Jointing to be measured & paid for separately) including fitting and fixtures.110mm

Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking GI/PVC pipes and fittings etc all complete as per specification.

Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per specification complete.

Providing and fixing under ground unplasticized rigid PVC Soil pipes conforming to IS:13592 Type-A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion single socketed pipes with nails,bobbins and wooden plugs as per specification or laying in trenches including earth work in exavation in all kind of soil & refilling of trenches as er specification.(Jointing to be measured & paid for separately) including fitting and fixtures.160mm dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge.Concealed work, including cutting chases and making good the wall etc.40 mm nominal dia

50 mm nominal dia

Providing and fixing of Brass or Gun metal Full Way valve conforming to IS :71-1995 of the following nominalsized with wheel as per specification complete.50mm

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design

Supplying all materials and constructing "50 user Septic Tank" of Chamber size 5000 x 1600 x 1700 mm with C.C. 1:3:6 using 40m size hard granite metal (C.B) on bed, Fly Ash Bricks in CM (1:4) including moulding and shaping the chamber in side with cement punning,constructing 50mm thick R.C.C. baffle wall with provision of inlet and outlet chamber S.W pipes,iron steps,vent pipe,R.C.C cover slab of 100mm thick in (1:2:4) with M.H covers & earth work in excavction in ordinary soil and refilling the cavity around chamber including curing, conveyance of all materials to work site, royalty ,taxes etc.all complete as per P.H dwg. & Specification and direction of Engineer-in-charge.

Supplying all materials and constructing M.H / I.C. Chamber of size 600 x 600 x 600 mm with C.C. 1:3:6 using 40m size hard granite metal (C.B) on bed, Fly Ash Bricks in CM (1:4) including moulding and shaping the chamber inside and benching with C.C (1:2:4) using 12mm size hard granite C.B chips with R.C.C M.H Cover & 12mm CP (1:4) with punning & Earth Work in excavation in ordinary soil and refilling the cavity around chamber including curing, conveyance of all materials to work site, royalty taxes etc.All complete as per P.H dwg. & Specification and direction of Engineer-in-charge.

Bore Well: Sinking of 200 mm Dia (46 Mtr. Depth) production well through D.T.H. or combination drilling rigs in hard rock areas with PVC/ GI casing pipes etc. all complete as per specification and direction of Engineer-in-charge.(As per Detailed Estimate Enclosed)

Construction of Circular soakpit size 1.20mdiax2.00mdepth

Recessed wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6 Amp, 250 V clip in type switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of Wires- Finolex/Anchor/Polycab/HAVELLS/RR KABEL/KEI) or equivalent) (Make of Conduit-AKG/Anchor/Polycab or equivalent reputed make A catagory ISI marked as approved) (Make of switch/socket- Schneider(Zencelo)/Legrand( myrius) /Panasonic (Europa)/Havells(Equivalent model) or equivalent) (Make of accessories- Anchor/Havells) (Make of G.I box, face plate & cover-Schneider(Zencelo)/Legrand( myrius) /Panasonic (Europa) or equivalent reputed make & model A catagory ISI marked as approved) Group C

Recessed wiring to secondary light point looped from primary light point with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including 3 plate ISI marked Ceiling rose with all accessories & connection as per direction of Engineer in charge.(Make of Wires- Finolex/Anchor/Polycab/HAVELLS/RR KABEL/KEI) or equivalent) (Make of Conduit-AKG/Anchor/Polycab or equivalent reputed make A catagory ISI marked as approved) (Make of switch/socket- Schneider(Zencelo)/Legrand( myrius) /Panasonic (Europa)/Havells(Equivalent model) or equivalent) (Make of accessories- Anchor/Havells) (Make of G.I box, face plate & cover-Schneider(Zencelo)/Legrand( myrius) /Panasonic (Europa) or equivalent reputed make & model A catagory ISI marked as approved) Average Length: 3 mtr

Recessed wiring for 5 / 6 amp socket outlet with 6Amp, 250 V clip in type modular switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection on same switch board as per direction of Engineer in Charge. (Make of switch/socket- Schneider(Zencelo)/Legrand( myrius) /Panasonic (Europa)/Havells(Equivalent model) or equivalent)

Recessed wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6Amp, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection on separate board as per direction of Engineer in Charge. (Make of Wires- Finolex/Anchor/Polycab/HAVELLS/RR KABEL/KEI) or equivalent) (Make of Conduit-AKG/Anchor/Polycab or equivalent reputed make A catagory ISI marked as approved) (Make of switch/socket- Schneider(Zencelo)/Legrand( myrius) /Panasonic (Europa)/Havells(Equivalent model) or equivalent) (Make of accessories- Anchor/Havells) (Make of G.I box, face plate & cover-Schneider(Zencelo)/Legrand( myrius) /Panasonic (Europa) or equivalent reputed make & model A catagory ISI marked as approved)

Recessed wiring for 2 x 6 amp socket outlet controlled by 2 nos 6Amp, 250 V clip in type switch ISI marked mounted on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer in Charge. (Make of switch/socket- Schneider(Zencelo)/Legrand( myrius) /Panasonic (Europa)/Havells(Equivalent model) or equivalent)

Recessed wiring for 6 pin 16 amp socket outlet with 16Amp, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer in Charge. (Make of switch/socket- Schneider(Zencelo)/Legrand( myrius) /Panasonic (Europa) / Havells (Equivalent model) or equivalent)

Supplying and fixing of 25Amp socket & 25Amp, 250 V moular type starter ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer in Charge.

Recessed wiring to submain in 4 x 6sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 4.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.

Recessed wiring to submain in 2 x 6 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 25 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 4.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire- Finolex/Anchor/Polycab/ HAVELLS/RR KABEL or equivalent) (Make of conduit-AKG/Anchor/Kinjal or equievalant)

Recessed wiring to submain in 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire- Finolex/Anchor/Polycab/ HAVELLS/RR KABEL or equivalent) (Make of conduit-AKG/Anchor/Kinjal or equievalant)

Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire- Finolex/Anchor/Polycab/ HAVELLS/RR KABEL or equivalent) (Make of conduit-AKG/Anchor/Kinjal or equievalant)

Recessed wiring to submain in 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire- Finolex/Anchor/Polycab/ HAVELLS/RR KABEL or equivalent) (Make of conduit-AKG/Anchor/Kinjal or equievalant)

Supply and fixing of following way three pole and neutral, sheet steel, MCB distribution, 415 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required ( But with out MCB/ RCCB/ Isolator) (Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/Panasonic(Equivalent model) 6 way (4 + 18 ), TPN , MCB DB double door horizontal type/ABB(Equivalant model) or equievalant.

Supply and fixing of single pole MCB with sheet steel enclosure, distribution board, on surface /recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphate and powder painted including earthing etc. as required ( But with out MCB/ RCCB/ ISOLATOR) (Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/Panasonic(Equivalent model) /ABB(Equivalant model) or equievalant.8 way SPN , MCB DB double door

Supply and fixing of following rating 240 V Minature Circuit Breaker (MCB) having a sensitivity current up to 10kA in the existing MCB DB ISI marked complete with connection testing and commissioning etc as required. (Make-LEGRAND- DX3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/Panasonic(Equivalant model) /ABB(Equivalant model) or equievalant.6 amp to 32 amp rating SP MCB , "c" series, 10KA breaking capacity

Supply and fixing of following rating 240 V Residual Current Breaker with Overcurrent protection (RCBO) having a sensitivity current up to 100mA in the existing MCB DB ISI marked complete with connection testing and commissioning etc as required. (Make-LEGRAND- DX3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/Panasonic(Equivalant model) /ABB(Equivalant model) or equievalant.

25 to 40 amp rating DP RCBO, 30mA

40 amp rating FP RCBO, 100/300 mA

Supply of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of following sizes of cable as required. (Make- POLYCAB / FINOLEX / HAVELLS) or equievalant reputed ISI MARKED MAKE

3.5 C x 185 sq.mm Al

3.5 C x70sq.mm Al

Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade ofsize exceeding 25 sq.mm but not exceeding 400 sq.mm in the existing RCC/HUME/STONEWARE/METAL pipe as required.

Laying and fixing of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm on surface as required.

Laying and fixing of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size exceeding 120 sq.mm but not exceeding 400 sq.mm on surface as required.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accesories like socket , bend, couplers etc conforming to IS 14930, part II complete with fitting and cutting jointing etc direct in ground (75mm below ground level) inciuding excavation and refilling the trench but excluding sand cushioning and protective covering etc complete as required.120 mm dia (OD -120mm & ID- 103mm nominal)

Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required. 3.5 C x 185 sq.mm Al

3.5 C x70sq.mm Al

Supply, installation,testing & commissioning of floor mounting front operated front access extensible type cubicle panel totally enclosed, dust and vermin proof with IP-42 /55 protection with hinged and lockabale doors.CRCA sheets including Busbars, interconnections,tinned copper crimping lugs, bonding to earth and painting suitable for use at 415 V, 3phase 4 wire 50 Hz system, and to withstand a fault level of 35KA symmetrical for 1 sec at 415 V complete as per specifications, as required and as below : All switchboards shall have provision for entry of cables from the bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The bus bars shall be insulated with heat shrinkable sleeves.SMC/DMC shrouds and busbar supports shall be used. ( Make of switchgear - LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/model) /ABB(Equivalant model) ISI marked) or equievalant make with proper model

MAIN PANEL with 400A 4P MCCB as incomer,5-30A Digital 1 phase energy Meter -43 nos followed by 32A 2P MCB-43 Nos,5-30A Digital 3 phase energy Meter -1 no followed by 40A 4P MCB-1 No, as Outgoing. and 3nos 400/5A CT, 0-400A Digital Ammeter, 400A aluminium Bus Bars and 50kA Type-I+II 3P+N SPD with back up MCB -1 set in the Incomer.

METER PANEL-1 with 125A 4P MCCB as incomer,5-30A Digital 1 phase energy Meter -11 nos followed by 32A 2P MCB-11 Nos, as Outgoing. and 3nos 150/5A CT, 0-400A Digital Ammeter, 150A aluminium Bus Bars and 50kA Type-I+II 3P+N SPD with back up MCB -1 set in the Incomer.

METER PANEL-2 with 125A 4P MCCB as incomer,5-30A Digital 1 phase energy Meter -09 nos followed by 32A 2P MCB-09 Nos, as Outgoing. and 3nos 150/5A CT, 0-400A Digital Ammeter, 150A aluminium Bus Bars and 50kA Type-I+II 3P+N SPD with back up MCB -1 set in the Incomer.

METER PANEL-3 with 125A 4P MCCB as incomer,5-30A Digital 1 phase energy Meter -10 nos followed by 32A 2P MCB-10 Nos, as Outgoing. and 3nos 150/5A CT, 0-400A Digital Ammeter, 150A aluminium Bus Bars and 50kA Type-I+II 3P+N SPD with back up MCB -1 set in the Incomer.

METER PANEL-4 with 125A 4P MCCB as incomer,5-30A Digital 1 phase energy Meter -13 nos followed by 32A 2P MCB-13 Nos, as Outgoing. and 3nos 150/5A CT, 0-400A Digital Ammeter, 150A aluminium Bus Bars and 50kA Type-I+II 3P+N SPD with back up MCB -1 set in the Incomer.

Supply and fixing of chemical Earthing of with 3mtr long 40mm dia chemical filled comound and GI earth electrode including excavation of earth pit with highly conductive back filled chemical compund of 2 x 25kg , brick work in cement mortar masonary work with removable cover for Earth pit chamber of suitable size including all accessories, labour cost, T&P etc complete work as per Direction of EIC.

Supplying and laying 25 mm x 6 mm G.I earth strip ISI marked at 0.5 meter below grond level as strip earth electrode including soldering etc. as required

Supplying and laying 25 mm x 5 mm copper strip on surface or in recess for connection etc as required.

Providing and fixing of lightning conductor finial made of 25mm dia 300 mm long, G.I tube,having single prong at top,with 85mm dia 6 mm thick G.I base plate including holes etc. complete as required

Providing and fixing of G.I. tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run)

Providing and fixing of G.I. tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For vertical run)

Providing and fixing of testing joint, made of 20 mm x 3 mm thick G.I. strip, 125 long with 4 nos of G.I. bolts, check nuts and spring washer etc complete as required.

Reveting, sweating and soldering of copper / G.I. tape ( with another copper / G.I. tape, base of the finial or any other metallic object) as required

Providing and laying of G.I. tape 32 mm x 6 mm from earth electrode directly in ground as required.

Earthing with G.I. earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (But wih out charcoal and salt) as required.

Extra for using salt and charcoal for G.I or copper plate earth as required

Supply and installation of Rubber Mats 12mm thick of size 2000mm x 1000mm x 12 mm thick Electrical tested with test certificate.

Supply and fixing of fire buckets with angular fabricated stand to fix 4 buckets in each stand for Electrical fire protection as per standards of Electrical Inspectorate.

Supply and fixing of 5Kg Dry Powder type fire extinguisher with mounting clamps with pressure test certificate .

Supply and fixing of shock treatement charts duly laminated along with separate colour single line diagram laminated, to be fixed in Electrical control panel room.

Supply and handing over 11KV Tested Rubber hand gloves to be used on LT supply with Test certificate.

Supply and Fixing of 250X200mm Danger Notice Plate as per direction of EIC.

Supply and fixing of first aid box with medicines complete with medicine with three years expiry date to be fixed in Electrical control panel room.

Recessed wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6 Amp, 250 V clip in type switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of Wires- Finolex/Anchor/Polycab/HAVELLS/RR KABEL/KEI) or equivalent) (Make of Conduit-AKG/Anchor/Polycab or equivalent reputed make A catagory ISI marked as approved) (Make of switch/socket- Schneider(Zencelo)/Legrand( myrius) /Panasonic (Europa)/Havells(Equivalent model) or equivalent) (Make of accessories- Anchor/Havells) (Make of G.I box, face plate & cover-Schneider(Zencelo)/Legrand( myrius) /Panasonic (Europa) or equivalent reputed make & model A catagory ISI marked as approved) Group C

Recessed wiring for 5 / 6 amp socket outlet with 6Amp, 250 V clip in type modular switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection on same switch board as per direction of Engineer in Charge. (Make of switch/socket- Schneider(Zencelo)/Legrand( myrius) /Panasonic (Europa)/Havells(Equivalent model) or equivalent)

Recessed wiring for 6 pin 16 amp socket outlet with 16Amp, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer in Charge. (Make of switch/socket- Schneider(Zencelo)/Legrand( myrius) /Panasonic (Europa) / Havells (Equivalent model) or equivalent)

Recessed wiring to submain in 2 x 6 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 25 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 4.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire- Finolex/Anchor/Polycab/ HAVELLS/RR KABEL or equivalent) (Make of conduit-AKG/Anchor/Kinjal or equievalant)

Recessed wiring to submain in 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire- Finolex/Anchor/Polycab/ HAVELLS/RR KABEL or equivalent) (Make of conduit-AKG/Anchor/Kinjal or equievalant)

Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire- Finolex/Anchor/Polycab/ HAVELLS/RR KABEL or equivalent) (Make of conduit-AKG/Anchor/Kinjal or equievalant)

Recessed wiring to submain in 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire- Finolex/Anchor/Polycab/ HAVELLS/RR KABEL or equivalent) (Make of conduit-AKG/Anchor/Kinjal or equievalant)

Supply and fixing of single pole MCB with sheet steel enclosure, distribution board, on surface /recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphate and powder painted including earthing etc. as required ( But with out MCB/ RCCB/ ISOLATOR) (Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/Panasonic(Equivalent model) /ABB(Equivalant model) or equievalant.4 way SPN , MCB DB double door

Supply and fixing of following rating 240 V Minature Circuit Breaker (MCB) having a sensitivity current up to 10kA in the existing MCB DB ISI marked complete with connection testing and commissioning etc as required. (Make-LEGRAND- DX3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/Panasonic(Equivalant model) /ABB(Equivalant model) or equievalant. 6 amp to 32 amp rating SP MCB , "c" series, 10KA breaking capacity

Supply and fixing of following rating 240 V Residual Current Breaker with Overcurrent protection (RCBO) having a sensitivity current up to 100mA in the existing MCB DB ISI marked complete with connection testing and commissioning etc as required. (Make-LEGRAND- DX3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/Panasonic(Equivalant model) /ABB(Equivalant model) or equievalant. 25 to 40 amp rating DP RCBO, 30mA

Supply of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of following sizes of cable as required. (Make- POLYCAB / FINOLEX / HAVELLS) or equievalant reputed ISI MARKED MAKE . 4 C x 16 sq.mm Al

Laying and fixing of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface as required.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accesories like socket , bend, couplers etc conforming to IS 14930, part II complete with fitting and cutting jointing etc direct in ground (75mm below ground level) inciuding excavation and refilling the trench but excluding sand cushioning and protective covering etc complete as required.120 mm dia (OD -120mm & ID- 103mm nominal)

Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required.4 C x16sq.mm Al

Supply, installation,testing & commissioning of floor mounting front operated front access extensible type cubicle panel totally enclosed, dust and vermin proof with IP-42 /55 protection with hinged and lockabale doors.CRCA sheets including Busbars, interconnections,tinned copper crimping lugs, bonding to earth and painting suitable for use at 415 V, 3phase 4 wire 50 Hz system, and to withstand a fault level of 35KA symmetrical for 1 sec at 415 V complete as per specifications, as required and as below : All switchboards shall have provision for entry of cables from the bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The bus bars shall be insulated with heat shrinkable sleeves.SMC/DMC shrouds and busbar supports shall be used. ( Make of switchgear - LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/model) /ABB(Equivalant model) ISI marked) or equievalant make with proper model

METER PANEL-1 with 63A 4P MCCB as incomer,5-30A Digital 1 phase energy Meter -12 nos followed by 32A 2P MCB-12 Nos, as Outgoing. and 3nos 100/5A CT, 0-100A Digital Ammeter, 100A aluminium Bus Bars and 50kA Type-I+II 3P+N SPD with back up MCB -1 set in the Incomer.

Supply and fixing of chemical Earthing of with 3mtr long 40mm dia chemical filled comound and GI earth electrode including excavation of earth pit with highly conductive back filled chemical compund of 2 x 25kg , brick work in cement mortar masonary work with removable cover for Earth pit chamber of suitable size including all accessories, labour cost, T&P etc complete work as per Direction of EIC.

Supplying and laying 25 mm x 6 mm G.I earth strip ISI marked at 0.5 meter below grond level as strip earth electrode including soldering etc. as required

Supplying and laying 25 mm x 5 mm copper strip on surface or in recess for connection etc as required.