8382 MAINT AND REPAIR/ REPLACEMENT AND CLEANING OF SEWAGE LINE, MANHOLES, SEPTIC TANKS SOAKAGE WELLS, WATER TANK CLEANING, CLEANING OF DRAIN PIPES ETC AT STN BAREILLY UNDER GE (EAST) BAREILLY

Amount

Removing existing man hole cover and cleaning/ de-sludging, descaling, de-chocking of existing Manhole/Septic tank/ Soakage well of any description, size and depth with combined high pressure water jetting cum suction (vacuum) type machine minimum 2000 ltr capacity tank mounted on LCV/HCV and having facilities of high pressure vacuum and provn of hydraulic through high pressure thermo plastic fiber based jetting hose and conical round shape nozzle pipe and flushing after cleaning including removing the same in the tank to place outside MOD land all as per existing rules and regulations of civil authorities and flushing the same with fresh water etc complete all as specified and directed. Note : Log book for above T&P properly maintained by Contractor and verified by Engr-in-Charge before process of payment.

Removing existing man hole cover and cleaning of existing sewage line of any dia and any depth and size including manholes upto 1.5mtr depth by mechanical Jetting/rodding machine with sufficient pressure and rodding to clear the line without damaging the pipes by removing from sludge chambers (PVC/ SGSW/RCC hume pipe ) gully trap of any size and shape up to any depth by pumping out /removing liquid waste / sewage , plugging the ends pipe or diverting the flow into drains if necessary , removing silt ,sludge etc , sprinkling bleaching powder on the silt to avoid bad smell including all precautionary and safety measures such as safety belts , lighting arrangements face mask etc and removing the same (silt , sludge & other waste material ) leak proof trucks covered with tarpo line to outside of MD land all as per existing rules and regulations of civil authorities and flushing the sewer line with fresh water etc complete all as specified and directed Note : (i). After Commencement of work the Contractor should start the cleaning of Sewage line without any delay. (ii) At the time of cleaning the sewage line the contractor will intimate this office on daily basis for supervision of work and kept the record of cleaned sewage line length on register duly signed by User complete. (iii) The Contractor is liable for maintaining once cleaned sewage line till completion date of Contact and payment shall be made once during the Contract period.

Cleaning & de-silting of manholes depth exc 1.5 mtr but not exc 6.00 by pumping out /removing liquid waste / sewage & plugging the ends sewer pipes or diverting the flow into drains if necessary removing silt , sludge etc sprinkling bleaching powder on the silt to avoid bad smell including all precautionary and safety measures , such as safety belts ,lighting arrangements face mask etc and removing the same (silt ,sludge & other waste material ) in leak proof trucks covered with tarpaulin to outside of MD land all as per existing rules and regulations of civil authorities and cleaning the manholes with fresh water etc complete all as specified and directed.

Clearing blockages and removal of sludge/mud and other accumulated materials and cleaning gully traps/nahani traps, Bends with any dia pipes by opening doors of bends and refixing the same and manhole chambers of any description and size. Including disposal sludge materials in closed filth carts and depositing all as directed by Engr-in-charge, including sprinkling of antibiotic powder on affected area complete all as specified and directed by Engineer-in-charge. Note : (i) Contractor/ supervisor with sufficient Nos (ie minimum Two person of each zone) of sewer cleaning personals will report to AGE B/R III Office (Zone A, B,C & D) for collecting day to day sewage complaint at 8.00 AM and completed the complaint within 48 hrs in AGE B/R III Office (Zone A, B,C & D) and necessary E- Rickshaw shall be provided by contractor Zone wise for transportation of sewage personals with dress code as per directed by Engr-in-Charge. (ii) Necessary arrangement of tools for clearing the sewage line/blockage beared by contractor including complaint slip duly printed. (iii) In case, fail to attend the complaint within 48 hrs, the recovery amount will be Rs 300.00 for each complaint. (iv) If any blockage is at any height upto 4 storey bldg the contractor will remove the blockage by using ladder or other mechanical means to clear the blockage , including puncture the vertical lines and making good the same with hassion cloth with CM , The rates are deemed to include this provision and payment will be made under this item.

Pumping out of liquid sludge etc, from septic tank/soakage well any depth and removing the settled sludge/ materials and depositing beyond A1 defence land by contractors own arrangement complete all as specified and directed. Note- The unit rate quoted under this item shall deemed to include the arrangements of Sewage pump and delivery pipe minimum 60 mtr length and all necessary T&P with man and material and safety equipment etc. for measurement purpose internal dimension of well upto sludge height to be measured.

De watering of well up to 12 Mtr deep and up to 8 mtr dia by portable pumping set and taking out manually waste material like sludge , mud ,soil , sanitary material and other dirts etc from inner sump and outer housing sump by using labour/ equipment and depositing the same waste material at low lying area by digging pits all as , cleaning and washing the surface area of sump well with wire brush and removing the algae growth including removal of grass/tree roots including one coat brush of bleaching powder at wall of sump etc complete all as specified and directed.

Demolition and breaking up of drain pipe 150 mm internal dia of pipe (salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed.

Demolition and breaking up of drain pipe 200mm internal dia of pipe (salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed.

Demolition and breaking up of drain pipe 300 mm internal dia of pipe (salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed.

Demolition of cement concrete un-reinforced of any description and in any portion not otherwise specifically provided for sewage line bed and manhole complete all as specified and directed.

Demolition of reinforced cement concrete (reinforced cut as required to facilitate to demolition) of any sescription and in any portion not otherwise specified complete all as specified and directed.

Demolition of brickwork built in cement mortar including all quoins, arches, pillars, etc,and rubbish off the premisses complete all as specified and directed.

Taking down cement plaster of any description on brick walls including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Dismantling water storage tank exceeding 250 litre and not exceeding 500 litre capacity and removing from site complete all as specified and directed.

Dismantling water storage tank exceeding 500 litre and not exceeding 1000 litre capacity and removing from site complete all as specified and directed.

Taking down eaves gutters and rain water pipes(any size or pattern) including all fittings heads shoes, bends necks, etc including removal from site (measured overall fixed along the centre line over fittings and accessories) complete all as specified and directed.

Dismantling of 75mm bore cast iron/ PVC drain pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Taking up or down15 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed.

Taking up or down 20 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed.

Excavating in trenches, n exc 1.5m wide and n exc 1.5 m depth; for foundation, etc. or for shafts, wells, cesspits, manholes,pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in Soft /Loose soil complete all as specified and directed. Note : Cutting of scrubs, plants, bushes, small tress etc including deemed in quoted rates and and nothing shall be paid extra in this account.

All as per above item No 21 but depth exc 1.5m and n.exc 3m complete all as specified and directed.

All as per above item No 21 but depth exc 3 m and n.exc 4.5 m complete all as specified and directed.

All as per above item No 21 but depth exc 4.5 m and n.exc 6 m complete all as specified and directed.

Returning filling in, Including spreading, levelling,. Watering and well ramming soil in layers not exceeding 25 cm thick, complete all as specified and directed.

Removal of excavated soils n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed

M&L for cement concrete 1:4:8 type D2 using 40mm graded crushed stone aggregate in foundation filling as bedding, haunching,mass concrete complete all as specified and directed.

M&L for brick work with fly ash bricks with sub class B old size brick, straight or curved on plan exc. 6 m mean radius, built in CM 1:4 complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4, including finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for 150 mm bore dia reinforced concrete pipes, class NP2, laid and jointed complete with collars laid in trenches and jointes complete all as specified and directed.

M&L for 150 mm dia HDPE DWC pipe SN 8 (As per 16098) laid and jointed complete with collars laid in trenches and jointes complete all as specified and directed.

M&L for 200 mm dia reinforced concrete pipes, class NP2, laid and jointed complete with collars laid in trenches and jointes complete all as specified and directed.

M&L for 300 mm dia reinforced concrete pipes, class NP2, laid and jointed complete with collars laid in trenches and jointes complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required (internal dia of pipe 150mm )Complete all as specified and directed.

All as per item No.34 above but internal dia of pipe 200 mm complete all as specified and directed.

All as per item No.34 above but internal dia of pipe 300mm complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate ) as in coping/ benching/ bed plate including necessary form work complete all as specified and directed.

M&L for RCC (Nominal Mix) 1:2:4 Type B-1 (using 20mm graded crushed stone aggregate) for slab supported on walls, beams and column in floors, roofs, landings, balconies, canopies, deck slab, manhole cover and in shelves and the like complete all as specified and directed.

M&L for rormwork to soffits of suspended slab such as roof slab, floor slab, landing and similar work n.exe 200mm thick (horizontal or slooping for rough finished surface of concrete complete all as specified and directed.

M&l for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizintal or sloping and similar work exc 10cm but n exc 20cm wide with fair finished surfaces complete all as specified and directed.

M&L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F in replacement vitreous china water closet pan (Pedestal pattern), white with and including plastic water closet seat, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device, (excluding fixing bolts, flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flush pipe, anti syphonage pipe, etc. complete all as specified and directed.

S&F in replacement vitreous China squatting pan 'Orissa pattern', size 580 x 440 mm white, with integral foot rests and chinaware 'P' or 'S' trap , front or back inlet including connections to flush pipe including making good to floor with existing finish complete all as specified and directed.

S&F in replacement Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe including fixing plugs , bedding urinal against wall in cement mortar (1:2) etc. including CP Waste fitting and PVC waste pipe completed all as specified and directed.

S&F in replacement viterous china wash hand basin of size 550 x 400 mm white colour flat back excluding taps, chain and plug and porcelean stopper but including brackets and CP waste fitting complete all as specified and directed.

S&F in replacement 10 litres capacity PVC Valveless symphonic action type flushing cistern high / low level white complete with inlet , ball valve float and handle including brackets and telescopic down pipes and jointing with WC complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D2 (40mm graged aggregate) as sub base of floor complete all as specified and directed.

M&L for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.09sqm but not exceeding 0.16 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6 complete all as specified and directed.

M&L for gazed ceramic coloured tiles of size 300x450x7mm thick on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed with white or coloured cement and pigment to match the shade of tile over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

S&F in replacement PVC (SWR) pipe 110mm bore single socketed with rubber ring joint fixed to walls including mild steel Stack clamps made out of 50mmx 5mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof surface complete all as specified and directed.

S&F in replacement PVC (SWR) pipe 75mm bore single socketed with rubber ring joint fixed to walls including mild steel stack clamps made out of 50mmx 5mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof surface complete all as specified and directed.

S&F 15 mm dia steel water tubing galvanized medium grade concealed in all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed.

S&F 20 mm dia steel water tubing, galvanized, medium gradeconcealed in all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed.

S&F in replacement bend PVC (SWR) with oval excess door 110mm bore complete all as specified and directed.

S&F in replacement bend PVC (SWR) with excess door 75mm bore complete all as specified and directed.

S&F PVC (SWR) 75 mm bore junction single (Single 'T') equal or unequal with access door complete all as specified and directed.

S&F PVC (SWR) 110 mm bore junction single (Single 'T') equal or unequal with access door complete all as specified and directed.

Cleaning of old PVC water tank of capacity exc.250 & n. exc. 500 litre removing all scale and dirt using detergent powder and bliching powder etc from tanks and from mouth of pipe etc, and hoisting if required and reconnecting to the pipe and writting of cleaning date on tank with paint after removing the old cleaning date complete all as specified and directed.

Cleaning of old PVC water tank of capacity exc.500 & n. exc. 1000 litre removing all scale and dirt using detergent powder and bliching powder etc from tanks and from mouth of pipe etc, and hoisting if required and reconnecting to the pipe and writting of cleaning date on tank with paint after removing the old cleaning date complete all as specified and directed. Note : Tank after cleaning shall be shown to the user and got signed by the user and put up to Engr-in-Charge weekly for verification. Any damage to ball cock, float valve, cheaknuts and any leakage/ any interpution in water supply occured to to negligence by Contractor the same shall be rectified by the Contractor and nothing shall be paid extra on this account.

S&F in replacement 15 mm bore dia gun metal, globe or gate valve complete all as specified and directed.

S&F in replacement 20 mm bore dia gun metal, globe or gate valve complete all as specified and directed.

S&F in replacement 15 mm bore dia float valve of high pressure PTMT with epoxy coated aluminuim rod and high density plastic ball screwed for iron pipe and fixed in tank which situated up to 15 m height building including necessary ladder for climbing if required complete all as specified and directed.

All as per item No. 61 above but 20 mm bore complete all as specified and directed.

M&L for removing of tree roots of any girth and height, shrubs and bushes from wall surface/roof top/chajjas up to 15 M height including repairing of cracks and filling the tree roots dismantel portion with chemical/ Acid not to grow of tree again making good in cement mortor 1:3 and to match the surface with existing finishes including all T&P required and considering all saftey measures upto carry out work of upto ht 15 mtrs of bldg etc. completed and removal of shrubs up to 50 m distance.

S&F in replacement service tank lid / cover of size 0.45 m dia and 0.20 m height made with 0.9mm thick GI sheet shaped into hollow semi sphere fixed to over head PVC service tank of 250 ltrs to 1000 ltrs capacity incl necessary nut, bolts washers and locking arrangement complete all as specified and directed.

S&F in replacement rotational moulded polythene water tank of 500 Ltrs capacity 3 layer (cylindrical, vertical with close top) hoisted and fixed in position complete all as specified and directed.

S&F in replacement 1000 litres rotational moulded polyethylene water storage tanks 3 layer (cylindrical vertical with closed top) triple layer ISI marked hoisted and fixed in position complete all as specified and directed.

M&L for factory made RCC manhole covers of concrete M30 reinforced with steel fiber, provided with mild steel rims for protected edges from damage with carrying handle,size 600x600x75 mm thick square shape , heavy duty factory made confirmig to IS - 12592 including removing of existing broken manhole cover of any description from site beyond A1 defence land with own arrangment of Contractor complete all as specified and directed.

M&L for factory made RCC manhole covers of concrete M30 reinforced with steel fiber,provided with mild steel rims for protected edges from damage with carrying handle,size 700x700x75 mm thick square shape , heavy duty factory made confirmig to IS - 12592 including removing of existing broken manhole cover of any description from site beyond A1 defence land with own arrangment of Contractor complete all as specified and directed.

M&L for factory made RCC manhole covers of concrete M30 reinforced with steel fiber,provided with mild steel rims for protected edges from damage ,with carrying handle size 1200x400x75 mm thick rectrangular shape , heavy duty factory made confirmig to IS - 12592 including removing of existing broken manhole cover of any description from site beyond A1 defence land with own arrangment of Contractor complete all as specified and directed.

M&L for factory made RCC manhole covers of concrete M30 reinforced with steel fiber,provided with mild steel rims for protected edges from damage with carrying handle,size 1000 x 500x75 mm thick rectrangular shape , heavy duty factory made confirmig to IS - 12592 including removing of existing broken manhole cover of any description from site beyond A1 defence land with own arrangment of Contractor complete complete all as specified and directed.

M&L for factory made RCC manhole covers of concrete M30 reinforced with steel fiber,provided with mild steel rims for protected edges from damage with carrying handle,size 900x600x75 mm thick rectrangular shape , heavy duty factory made confirmig to IS - 12592 including removing of existing broken manhole cover of any description from site beyond A1 defence land with own arrangment of Contractor complete complete all as specified and directed.

M&L for factory made RCC manhole covers of concrete M30 reinforced with steel fiber,provided with mild steel rims for protected edges from damage with carrying handle,size 350x350x75 mm thick square shape , heavy duty factory made confirmig to IS - 12592 including removing of existing broken manhole cover of any description from site beyond A1 defence land with own arrangment of Contractor complete complete all as specified and directed.

S&F in replacement stainless steel plate rack of size 31'' x 30'' x 10'' with using stainless steel sheet of 0.63mm thickness Fixed with Rawl plug and screw complete all as specified and directed.

S&F in replacement stainless steel sinks with drainage board made of 1mm thick stainless steel sheet for kitchen or laboratory with plugs washers and waste pipe including fixing cantilever brackets and connecting union to pipe overall size not less than 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed.

M/S MAHIRA ENTERPRISES (BID ID -3188822)

SHRI BALA JI STORE (BID ID -3184741)