1. Improvement of drinking water supply to Mir Mohalla and Handam Mohalla Habak Shanpora 2. WSS Hadoora. 3. WSS Danihama. 4. WSS Mulphaq (CDF Grants)

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: 1 meter from cutting edge

All kinds of soil

Ordinary Rock

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work)

100 mm dia. nominal bore (Light)

65 mm dia. nominal bore (Light)

40 mm dia. nominal bore (Light)

25 mm dia. nominal bore (Light)

20 mm dia. nominal bore (Light)

Providing, supply, lowering, laying, jointing hydraulic testing and commissioning of PE-100, PN-10 HDPE pipes in standard length confirming to IS 4984/14151/12788/13488-1 with necessary jointing material and all kinds of pipe specials including transportation, freight charges, inspection charges, loading, unloading charges conveying to departmental store jointing procedure as per relevant IS code complete with material to jointing procedure with all labour as directed by Engineer in-charge as per IS 7634 PArt II, hydraulic testing to specified pressures (including cost of all materials, labour and water) for specified length inclusive all kinds of taxes and carriages complete.

50mm HDPE pipe

40mm HDPE pipe

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete

25 to 40 mm nominal bore

50 to 80 mm nominal bore

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge :

Above 40 mm nominal bore

Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately).

50 mm dia.

Providing/ fixing of gun metal Gate valves including cost of nuts, bolts, rubber insulation etc. of ISI marked standard make all carriages upto site of work, complete and providing of check certificate from the standard manufacturer (above 50mm dia)

65 mm dia Gate valve

40 mm dia Gate valve

Providing and fixing of pipe specials from open market (if not available at divisional stores) Nike/Link or equivalent make.

20 mm dia GI elbow

25 mm dia GI elbow

40 mm dia GI elbow

50 mm dia GI elbow

65 mm dia GI elbow

80 mm dia GI elbow

100 mm dia GI elbow

20 mm to any smaller size GI sockets (reducing)

25 mm to any smaller size GI sockets (reducing)

40 mm to any smaller size GI sockets (reducing)

50 mm to any smaller size GI sockets (reducing)

65 mm to any smaller size GI sockets (reducing)

20 mm GI Tee (equal/ reducing)

25 mm GI Tee (equal/ reducing)

50 mm GI Tee (equal/ reducing)

65 mm GI Tee (equal/ reducing)

40 mm GI Tee (equal/ reducing)

65x20mm GI equal Tee

100 mm nominal bore GI Union

65 mm nominal bore GI Union

50 mm nominal bore GI Union

40 mm nominal bore GI Union

25 mm nominal bore GI Union

20 mm nominal bore GI Union

100 mm dia GI Nipple of length 3", 4" and 6"

100 mm dia GI Bend

65 mm dia GI Bend

50 mm dia GI Bend

65 mm dia GI Nipple of length 3", 4" and 6"

50 mm dia GI Nipple of length 3", 4" and 6"

40 mm dia GI Nipple of length 3", 4" and 6"

25 mm dia GI Nipple of length 3", 4" and 6"

20 mm dia GI Nipple of length 3", 4" and 6"