Tender For Fabrication of various Items From various M S Raw materials for Rajpipla (O&M) Division

Schedule -B for Fabrication of various Item From M S Round Bar, M S Channel

& M S Flat for Rajpipla(O&M) Division.

Name of Item Unit RATES

Fabrication of Anchor Rod from 16 SQ.mm MS Roundbar & 65 mm x 65 mm x

1 6 mm / 50 mm x 50 mm x 6 mm M.S. angle as per approved drawing and No.

requirement of the company.

Fabrication of Eye Bolt from 16 SQ.mm MS Roundbar with supplying of

2 (two) nuts of suitable size as per approved drawing and requirement of the No.

Fabrication of Turn Buckle from 16 SQ.mm MS Roundbar & 65 mm x 65 mm x

3 6 mm / 50 mm x 50 mm x 6 mm M.S. angle as per approved drawing and No.

requirement of the company.

Fabrication of 11' (feet) long Top/Bottom/D.O. angle from 65 mm x 65 mm x

6 mm M.S. angle as per approved drawing and requirement of the company.

Fabrication of 9' (feet) long Top/Bottom/D.O. angle from 65 mm x 65 mm x

6 mm M.S. angle as per approved drawing and requirement of the company.

Fabrication of 4'.6" (feet) long Tapping / bracing angle from 65 mm x 65 mm

6 x 6 mm M.S. angle as per approved drawing and requirement of the No.

Fabrication of 2'.3" (feet) long bracing/ suuport angle from 65 mm x 65 mm

7 x 6 mm M.S. angle as per approved drawing and requirement of the No.

Fabrication of 11KV HT 'V' Cross Arm from 65 mm x 65 mm x 6 mm M.S.

angle as per approved drawing and requirement of the company.

Fabrication of 11KV HT Top fitting from 65 mm x 65 mm x 6 mm M.S. angle

9 and 50mm x 6 mm M.S. flat as per approved drawing and requirement of the No.

Fabrication of 22KV HT Top fitting from 65 mm x 65 mm x 6 mm M.S. angle

10 and 50mm x 6 mm M.S. flat as per approved drawing and requirement of the No.

Fabrication of 22KV HT 'V' Cross Arm from 65 mm x 65 mm x 6 mm M.S.

angle as per approved drawing and requirement of the company.

Fabrication of Guy Clamp pair suitable for PSC pole from 50mm x 6 mm M.S.

flat as per approved drawing and requirement of the company.

Fabrication of Guy Clamp pair suitable for RSJ GIRDER pole from 50mm x

mm M.S. flat as per approved drawing and requirement of the company.

Fabrication of 'U' Clamp from 50mm x 6 mm M.S. flat as per approved

drawing and requirement of the company.

Fabrication of 'C' clamp suitable for PSC pole from 50mm x 6 mm M.S. flat as

per approved drawing and requirement of the company.

Fabrication of 'C' clamp suitable for RSJ GIRDER pole from 50mm x 6 mm

M.S. flat as per approved drawing and requirement of the company.

Name of Item Unit RATES

Fabrication of Three hole patti from 50mm x 6 mm M.S. flat as per

approved drawing and requirement of the company.

Fabrication of 11' (feet) long Top/Bottom channel from 100 mm x 50 mm x

mm M.S. channel as per approved drawing and requirement of the company.

Fabrication of 9' (feet) long Top/Bottom channel from 100 mm x 50 mm x

mm M.S. channel as per approved drawing and requirement of the company.

Fabrication of 11'(feet) long angle bracing from 50 mm x 50 mm x 6 mm

M.S. angle as per approved drawing and requirement of the company.

Fabrication of 9'(feet) long angle bracing from 50 mm x 50 mm x 6 mm M.S.

angle as per approved drawing and requirement of the company.

Fabrication of 11' (feet) long channel welded from assorted length of scrap

channel as per approved and requirement of the company

Fabrication of 9' (feet) long channel welded from assorted length of scrap

channel as per approved and requirement of the company

Fabrication of Guy Clamp pair suitable for 10 mtr PSC pole from 50mm x

mm M.S. flat as per approved drawing and requirement of the company.

Fabrication of Guy Clamp pair suitable for 9/11 mtr RSJ GIRDER pole from

25 50mm x 6 mm M.S. flat as per approved drawing and requirement of the PAIR

Fabrication of 5' (feet) long Tapping angle from 65 mm x 65 mm x 6 mm

M.S. angle as per approved drawing and requirement of the company.

Fabrication of H.T. Ext'n suitable for 11/22KV system from 65 x 65 x 6 mm

M.S. angle as per approved drawing and requirement of the company.

Total Estimate Amount Rs.

Twenty Five Lakhs Only

1 All fabricated items shall be fabricated by using weilding rods confirming to the relevant ISI

specifications and as directed by Engineer In-charge.

2 All fabricated items shall be painted with good quality (ISI Marked) of red oxide paint.

3 Necessary electricity connectionshall be provided by DGVCL on payment of required charges for

connection & electiricity bill of the same shall be paid by the agency.

4 The rates are inclusive of PF & Works Contract Tax and Exclusive of GST.

Signature of Contractor

EXECUTIVE ENGINEER (O&M)