SPECIAL REPAIRS TO INTERNAL WATER SUPPLY AT SMA AND CERTAIN OTHER SANCTIONED WORKS UNDER GE (NW) KOCHI AT NAVAL BASE KOCHI

Amount

Taking down old unserviceable GI tubing of size 40, 25, 20 mm complete all as specified and as directed.

Supply and fix on wall/concealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessay fittings, solvents of size 40 mm dia including taking down old one complete all as specified and directed. Make: Supreme/Eurotech /Astral/SFMC

All as per item No 2 here-in-before but of size 25 mm dia

All as per item No 2 here-in-before but of size 20 mm dia

Supply and fixing of Bib cock , CP quarter turn with flange and areator, fancy type short body cast copper alloy with crutch or butterfly handle screwed for GI/ CPVC pipe of size 15 mm and taking down old, complete all as specified and as directed by the Engineer-in-charge.(Make : Model No- F2004151 of Cera or hindware/Jaguar

Supply and fixing of Bib cock, CP quarter turn with flange and areator, fancy type long nose with wall flange cast copper alloy with crutch or butterfly handle screwed for GI/ CPVC pipe of size 15 mm and taking down old, complete all as specified and as directed by the Engineer-in-charge. Model No- F2004152 of Cera /hindware/Jaguar)

Supply and fixing of CP Bib cock short body with flange and nozzle for garden/wahing machine of size 15 mm including necessary fixing accessories with GI/CPVC pipes and taking down old unserviceble tape of any make , complete all as specified and as directed by the Engineer-in-charge. Model No -2003153 of Cera /hindware/Jaguar)

Supply and fixing of two way bib cock ,quarter turn with flange and areator of size 15 mm and taking down old unserviceble cock of any make , complete all as specified and as directed by the Engineer-in-charge Model No : F2004162 of Cera /hindware/Jaguar)

Supply and fix concealed stop cock regular body,Quarter turn with adjustable wall flange chromium plated with CP cup fancy type of size 20 mm and taking down old unserviceble one, complete all as specified and as directedby the Engineer-in-charge.Model No: F2002362 of Cera /hindware/Jaguar)

Supply and fixing 15 mm angle valve, half turn with flange, with flange type chromium plated for fixing accessories for for CPVC pipe and taking down old one, complete specified and as directed by the Engineer-in-charge.Model No: F2004201 of Cera / hindware/Jaguar)

S & F swivel overhead shower (minimum weight 40grams) of PTMT any colour with shower arm (minimum weight 40 grams) 15mm size, 195mm long with bend of 45 degree with flange for fixing with CPVC pipe and taking down old one,complete and all as specified and as directed by the Engineer-in-charge.(Make : Cera or prayag/hindware).

M/L for cutting chasses on walls floor etc not exceeding 20cm girth and making good the disturbed surface to match with the existing after removing the existing concealed pipe/laying new pipe, complete all as specified and directed by the Engineer-in-charge.

Demolition of cement concrete in ground floors and pavings n exc 15cm thickness, above ground level in the foundation

Material and labour for cement concrete in foundations, filling and mass concrete type 1:3:6(40mm graded aggregate).

S & F Rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted & fixed in position of capacity 1000 liters incl taking out u/s old one Make : Sintex (ISI)/ Aquatech

All as per item No.15 above but 500 ltr cap.

S & F CPVC Ball Valve of size 40 mm dia suitable for CPVC pipe incl necessary fittings and taking down old one complete all specified and directed. Make: Supreme/Eurotech /Astral/SFMC

S & F CPVC Ball Valve of size 25 mm dia suitable for CPVC pipe incl necessary fittings and taking down old one complete all specified and directed. Make: Supreme/Eurotech /Astral/SFMC

S & F CPVC Ball Valve of size 20 mm dia suitable for CPVC pipe incl necessary fittings and taking down old one complete all specified and directed. Make: Supreme/Eurotech /Astral/SFMC

S&F Mono block pump & motor of 1 HP, 230 Volt complete all as specified and directed.

Taking down old Tube light fitting of any wattage, type , model or make incl making good wall surfaces and removing to store yard.

Supply and fix LED tube rod 20W, both side connections on existing box type fittings including making necessary connections all as specified & directed. Make : Crompton Cat Part No. LGT8-20-865-2 , Luker Cat Part No. LT1818T-5Y, Wipro Cat Part No. D622065, Havells Cat Part No. Crystal 1213T8DSTL20WLED865SGLASS.

S&F Tubelight fitting 1 x20 w ,with T 8 LED tube with aluminium Extrusion heat sink for optimum performance with high luminous efficiency and batten pre wired suitable for use with LED tube with concealed accessories complete. including taking down old one complete all as specified and directed. Make: Philips Cat part No;TMC501 P1XT- LED 22W P3241+ESSENTIAL LED TUBE 1200MM 20W 865 T8 INDI-2100 lm/Crompton/WIPRO

Supply and fix in repair, LED security street light fitting with 25 watts, P66 protection, min 100 lumens per watt light output, 5KV external drive and 4KV internal drive surge protection, power factor 0.95, THD less than 10%. Potted driver with RoHs and CE marking, fitting comprises of unique fitting arm tilting option, die cast aluminium housing and heat resistant toughened glass including taking down existing old unserviceable MH/HPSV fittings. Make Crompton Cat Part no. LSTS-25CDL, Philips Cat Part No. BRP020LEDHP/CW240V25, Crompton Cat Part No. LSTS-25-CDL

Supply and fix LED Mini mirror light 1 x 14 Watt Wall/Surface mounted luminaries with engineering plastic housing, wired with all accessories complete incl provn of flexible copper wire from ceiling rose to light fitting terminal. Make- Make :Crompton Cat No. LCL-14-CDL or cromton/bajaj.

S&F ceiling light fitting 30W, fully diffused recessed mounted LED luminaire extruded aluminium housing, edge lit LED panel with light out put of 3000/m complete with add accessories, fixed to wall/ ceiling including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed. Cat Part No. RC375B LED 305 865 PSU of Philips

S&F LED fitting 1x18 W, 230V, round indoor mounted LED edge lit slim down light with die-cast aluminium housing finished in premium white powder coating efficiency 100 lm/W complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed. Cat Part No. LSCRM-18W-CDL of Crompton or Philips/Wipro

S&F 2 x 18 W LED batten industrial box type luminaire with CRCA body ,pre coated in white and pre wired for LED tube ,double lamp housing including RETRO LED T8 tubular lamp with extruded aluminium body and PC diffuser complete with external driver including all electrical connection all as specified and as directed. Box Frame Cat Part No. IGP162 LT8-16, Tube Cat Part No. LGT8-20-865-2 of Crompton/ Philips/ Havells

Taking out existing LT panel board with main switches, change over switch etc. after disconnecting the incoming and out going cables, earthing strips with angle iron frame etc and removing tpo store including transportation, loading, unloading etc.

All as per item No 29 above high frequency LT panel with one income and 2 x out going and busbar etc. (wall mounted type)

All as per item No 29 above but change over panel (wall mounted type).

Supply, design, erection and commissioning of LT panel board indoor type platform mounted fabricated through CPRI approved factory manufacturers, totally enclosed dust and vermin proof openable from both front and rear side made out of self supported 3.15 mm thick CRCA (Cold Rolled Cold Annealed) MS sheet of suitable length, width and height as per IE rule to accomodate all the items and conforming to IS-8623 and built upon 40 x 40 x 6 mm size angle frame work and lugs fixed on existing cable trenches having fron t and rear hinged doors with neoprene rubber gasket, danger plate, GI earthing strips at rear side, bottom detachable gland plate complete with suitable size single plated and passivated nuts, bolts, spring washers. The cabinet and all members shall be chemically treated with MSR solution for aircorrosive treatment and powder coated (shade RAL - 7032) with 9 tank process and shall be with IP-65 grade protection. The panel shall be suitable for 415 volts, 50 Hz 3 phase 4 wire system and internal connections which shall be provided with aluminium strips of suitable size and comprising of the following accessories.

Painting and servicing of existing LT panel of size 5 mtr x 2 mtr x 0.50 mtrs including all steel structure by spray painting and marking of all feeders all as specified and directed after servicing / replacing the following : (i) Replacemnet of all worn out gaskets with neoprene rubber gaskets (ii) Replacemnt of worn out nuts, bolts, cable lugs, thimbles etc. as per requirement

Supply, design, erection and commissioning of LT panel board indoor type wall mounted fabricated through CPRI approved factory manufacturers, totally enclosed dust and vermin proof openable from front side made out of self supported 3.15 mm thick CRCA (Cold Rolled Cold Annealed) MS sheet of suitable length, width and height as per IE rule to accomodate all the items and conforming to IS-8623 having front hinged doors with neoprene rubber gasket, danger plate, GI earthing strips at rear side, bottom detachable gland plate complete with suitable size single plated and passivated nuts, bolts, spring washers and fixed on wall. The cabinet and all members shall be chemically treated with MSR solution for aircorrosive treatment and powder coated (shade RAL - 7032) with 9 tank process and shall be with IP-65 grade protection. The panel shall be suitable for 415 volts, 50 Hz 3 phase 4 wire system and internal connections which shall be provided with aluminium strips of suitable size and comprising of the following accessories.

BUS BAR CHAMBER : (i) Sheet steel bus bar chamber having front hinged covers with a set of electrolytic grade high conductivity TP&N solid Aluminium bus bars, rated 400 Amps supported at required intervals sleeved with heat shrinkable PVC sleevings. The bars shall be colour coded at required intervals for identification - 01 No (Set of 04) (i) MCCB, 4 pole, 415 volts, 250 Amps thermal magnetic release, breaking capacity 36 KA - 01 No. (Make : LEGRAND Cat No. 420259 DPXᶟ series or equivalent model in ABB / SCHNEIDER) for incoming. (ii) MCCB, 4 pole, 415 volts, 200 Amps thermal magnetic release, breaking capacity 36 KA - 02 Nos. (Make : LEGRAND Cat No. 420258 DPXᶟ series or equivalent model in ABB / SCHNEIDER) for outgoing.

S&F on load manual change over switch disconnector confirms to IEC - 60947-3, IS/IEC 60947-3 with sheet metal enclosure of 315 Volts, 415 Volts for wire system wall mounted, connecting of existing cables with necessary thimbles glands etc all as specified and directed. Make : L&T Cat Part No. CO33150OSOO or equivalent Legrand / Schneider.

M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60cm x6 mm thick, buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meters below normal ground level, connected to GI earth strip 32X6 mm upto length 7.5 mtr by means of bolts, nuts and washers of galvanised steel all as shown in electrical plate No. 3 connected to earthing test point complete all as specified and indicated including testing on completion.

S&F aluminium strip 25 x 3.15mm with porcelain insulators,saddles and fixing screws etc for roof conductor and down conductor above ground all as specified and directed.

S&F 32 x 6 mm GI strip with saddles and screws etc complete all as specified and directed burried in ground /wall all as specified and as directed.

S&Fair termination single pointed aluminium rod 12mm dia and 300mm long all as specifed and directed.

Taking down old aluminium strip 25 x 3.15 mm with porcelain insulators,saddles and fixing screws and refixing the same etc for roof conductor and down conductor above ground all as specified and directed.

Taking down old GI strip 32 x 6 mm with saddles and screws and refixing same complete all as specified and directed burried in ground /wall all as specified and as directed.

M&L for test point terminal block made of gunmetal of size 75x75x25mm drilled and screened including all fixing arrangements with hexagonal headed screws all as specified.

M&L for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mmx6 mm thick burried directly in ground(earth pit not less than 2.25 metrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below ground level connected to galvanized iorn strip 32 X 6mm as earth lead by means of bolts, nuts, check nuts and washers of galvanized iron steel all shown in electric plate No.3 ( of SSR Part-i connected to earthing test pit all as specified or indicated including provn of necessery excavation and earth work in any type of soil, PCC pit ,RCC cover and frame, 20 mm bore medium grade watering pipe , water funnel, 40 mm bore GI medium grade protection pipe , common salt, charcol dust,returning, filling in of soil, removal of soil to a distance not exceding 50 mtr etc including testing on completion complete all as specified.

Taking down old air Termination from existing position all as specified and as directed.

Taking down old Test point from existing position all as specified and as directed.

Taking down old U/s Earthing from existing position all as specified and as directed.

M&L for point wiring with 1.5 Sqmm PVC insulated unsheathed multistranded single core copper conductor cable in PVC concealed conduit except beam, column and RCC roof and chases cutting incl 2mm thick MS sheet pressed terminal box (recessed) with 3 mm thick laminated hylem top cover incl 1.5 Sqmm PVC insulated copper conductor earth continuity wire for one light/fan point contolled by one switch.

All as per item No. 47 above but for one 5 pin 5 amps socket outlet on the same the same board.

All as per item No. 47 above but for one 5 pin 5 amps socket outlet on the independent board.

All as per item No. 47 above but with 2.5 Sqmm copper conductor including 2.5 Sqmm copper cable on earth wire for one 6 Pin 16 Amps Socket outlet

M&L for point wiring 4 Sqmm copper conductor including 1.5 Sqmm copper cable on earth wire and including concealed PVC conduit wiring complete all as specified and directed.

S&F switch piano flush type 5 Amps SP

S&F switch piano flush type 15 Amps SP

S&F ceiling rose surface bakelite 65 x 50 mm 3 terminals

S&F socket multipurpose, 230 Volts, Single Phase 5 Pin 5 Amp flush type

S&F socket multipurpose, 230 Volts single phase, 6 Pin 16 Amp flush type

S&F fan regulator electronic socket step type

Supply & fix Regal Batten for LED tube lights, both side connection type and LED tube rod 1 x 20 Watt, both side connection all as specified and as directed. Make : Havells Cat Part No. REGALBATTENT8 upto 1x22W SSBSWH for Regal Batten & CRYSTAL 1213T8DSTL20W LED 8655 GLASS for tube rod or Surya/ Luker

Supply and fix surface mounted LED 1 x 18 W down light with high laminous LED for indoor application complete with all accessories and connection to the electric conduit connected accessories complete. Make : Crompton Model No. LCTLRNE-18-CDL(1/1)

S&F sheet metal enclosures with socket plug top and MCB single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 A MCB

S&F SPN sheet metal enclosure for DB 8 ways double door

S&F MCB SP 5 to 40 A

S&F MCB TPN 63 A complete all as specified and directed.

S&F Sheet metal enclosure MCB TPN DB 8 way double door IP 43 type suitable for 200 amp including all electrical connection all as specified and as directed. Make: Schneider Cat Part No. A9HVTD08 / Legrand series XLᶟ6300 enclosure / L&T Cat Part No. DBPSG008DD

S&F MCB SPN 40 Amps

Taking down copper / aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and amking good disturbed surfaces of walls, floors etc.

Taking down old sub main wiring of any size

Taking down old u/s DB main switch of any size

M&L for submain wiring with 2 single core 4 Sqmm PVC insulated unsheathed multistranded copper conductor cable 1100 volt grade drawn throgh and including PVC rigid conduit concealed wiring inculding necessary PVC conduit specials including chases cutting complete exceapt beam and RCC roof and one run of 4Sqmm PVC insulated unshearthed single core 1100 volts grade multistranded copper conductor cable as earth continuity conduto9r and connceting with suitable size thimble complete allas specified and as directed. Note: Two run of 4 sqmm size PVE cable , one run of 4 Sqmm size PVC cable as earth wire and one run of PVC conduit shall be measured as one unit length

S&F 250mm sweep, PVC body exhaust fan heavy duty, single phase 230 Volts, all as specified & directed. Make: Havells Cat Part No. Ventil Air-DX white or Bajaj/ Crompton

ANIE JOHN CONTRACTORS

Green Ray Enterprises