Tripura

Active

Works

Civil Works - Roads

Improvement of road from Thalibari Manaipathar road to Dakshin Taisama via Thalibari Dakshin para(L 1.90 KM) under the jurisdiction of Kathalia PWD(RandB) Sub Division

Chief Engineer, PWD (R and B)

Sonamura | Sepahijala, Tripura

Amount: ₹1.4 CrCloses: 29 Oct 2026

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published13 Oct 2026
Closes29 Oct 2026
Bid Opening29 Oct 2026

Tender Value

₹1.4 Cr

EMD Value

₹2.8 L

Closing Date

29 Oct 2026, 3:00 pm

Tender Inviting Organisation

Name

Executive Engineer Sonamura Division PWD(RandB)

Address

O/o the Executive Engineer Sonamura Division PWD(RandB) Sonamura Sepahijala Tripura

Work Description

SH Earth work RCC Box culvert RCC drain and toe wall etc GrII

Tender Information

Tender ID

2026_CEPWD_78115_1

Reference Number

128/RDNIeT/SE-IV/PWD (RandB) /2026-27

Tender Type

Open Tender

Product Category

Civil Works - Roads

Form of Contract

Percentage

Period of Work

150 days

Location

Sonamura

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

10 documents required · 10 mandatory

Fee/PreQual/Technical/Finance

RequiredAppendix I Tenderers Contractor Certificate (.pdf)

RequiredAppendix II Detail Structure of the Organization (.pdf)

RequiredAppendix III Declaration of the Bidder (.pdf)

RequiredAppendix IV Undertaking by the Bidder (for Composite Bid only) (.pdf)

RequiredAppendix V DetailsofKeyTechnicalPersonneloftheContractorentrustedfortheproposedtenderedwork duringex (.pdf)

RequiredGeneral Condition of Contract Tripura PWD -7 (.pdf)

RequiredAnnexure I (Format of the letter tobe issued by theExecutiveEngineer(EE) regarding the IntegrityPact (.pdf)

RequiredAnnexure II (Format of the letter for acknowledging by the Bidder regarding the Integrity Pact) (.pdf)

RequiredAnnexure- III (Format of Integrity Pact) (.pdf)

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹4,000

EMD Fee Amount

₹2.8 L

Important Dates

Last Activity

13 Oct 2026

Published

13 Oct 2026

Bid Opening

29 Oct 2026

Download Starts

13 Oct 2026

Download Ends

29 Oct 2026

Submission Starts

13 Oct 2026

Clarification Period

13 Oct 2026 - 28 Oct 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (12 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Excavation in Soil using Hydraulic Excavator and Tippers with Disposal upto 1000 metres. Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections and transporting to the embankment location with all lifts and lead upto 1000 m as per MoRD Technical Specification Clause 302.3.	29,978.6	Cum	44.1	₹13,22,056.26
2	Construction of Embankment with Material obtained from Roadway Cutting. Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per MoRD Technical Specification Clause 301.5. (A) For spreading beyond 100 m	9,242.78	Cum	81.1	₹7,49,589.05
3	Excavation for Structures (A) Without dewatering.Earthwork in excavation for structures as per drawing and MoRD technical specifications Clause 305.1 including setting out, construction of shoring & bracing, removal of stumps & other deleterious material and disposal upto a lead of 50 m, dressing of sides & bottom and backfilling in trenches with excavated suitable material. I. Ordinary Soil i) upto 3 m depth.	1,335.17	Cum	458.2	₹6,11,772.6
4	Filling in foundation trenches as per drawing & MoRD technical specification Clause 305.3.9, 1200 (I) Sand filling	125.85	Cum	1,392.25	₹1,75,214.66
5	Providing concrete for plain concrete ( using jhama brick aggregate ) in open foundations complete including formwork as per drawings & MoRD technical specifications Clauses 802, 803, 900, 1202 and 1203. (including centring, shuttering, staging etc. but excluding reinforcement ) I. P.C.C grade M 10 ( using jhama brick aggregate ) (i)Nominal mix 1:3:6	123.69	Cum	9,448.65	₹11,68,703.52
6	Providing concrete for Plain/reinforced cement concrete in open foundation complete including formwork as per drawings & MoRD technical specification Clauses 802, 804, 805, 806, 807, 900, 1202 & 1204. (including centering, shuttering, staging etc. but excluding reinforcement) VI) R.C.C grade M-25 i)upto 5 m height	455.44	Cum	12,655.95	₹57,64,063.84
7	Providing & laying reinforced cement concrete in substructure as per drawings & MoRD technical specifications Clauses 800, 900, 1205.4 & 1205.5 (including centring, shuttering, staging etc. but excluding reinforcement ) II R.C.C M 25 1. For height upto 5 m	4.86	Cum	13,326.85	₹64,768.49
8	Supplying, fitting & placing Termo-Mechanical treated bar/Cold twisted deformed steel bar in open foundation complete as per drawings & MoRD technical specification Clauses 1002, 1005, 1010 and 1202	36.44	Ton	91,691.15	₹33,40,767.05
9	Supplying, fitting, & placing Termo-Mechanical treated bar/Cold twisted deformed steel bar reinforcement in substructure complete as per drawing & MoRD technical specifications Clauses 1002, 1010 & 1202	0.53	Ton	91,933.45	₹49,147.62
10	Providing weepholes in brick masonry/ stone masonry, plain/ reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe or uPVC pipe (110 mm OD of 6.0 Kg/cm2 pressure) extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and MoRD technical specification clauses 614, 709, 1204.3.7.	355.2	Mtr	393.75	₹1,39,860

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 2.20 MB

Work Item Documents

128R.pdf

Tender Documents • 3.19 MB

BOQ_79525.xls

BOQ • 0.29 MB

Addl128R.pdf

Additional Documents • 0.44 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Excavation in Soil using Hydraulic Excavator and Tippers with Disposal upto 1000 metres. Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections and transporting to the embankment location with all lifts and lead upto 1000 m as per MoRD Technical Specification Clause 302.3.

29,978.6

Cum

44.1

₹13,22,056.26

Construction of Embankment with Material obtained from Roadway Cutting. Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per MoRD Technical Specification Clause 301.5. (A) For spreading beyond 100 m

9,242.78

Cum

81.1

₹7,49,589.05

Excavation for Structures (A) Without dewatering.Earthwork in excavation for structures as per drawing and MoRD technical specifications Clause 305.1 including setting out, construction of shoring & bracing, removal of stumps & other deleterious material and disposal upto a lead of 50 m, dressing of sides & bottom and backfilling in trenches with excavated suitable material. I. Ordinary Soil i) upto 3 m depth.

1,335.17

Cum

458.2

₹6,11,772.6

Filling in foundation trenches as per drawing & MoRD technical specification Clause 305.3.9, 1200 (I) Sand filling

125.85

Cum

1,392.25

₹1,75,214.66

Providing concrete for plain concrete ( using jhama brick aggregate ) in open foundations complete including formwork as per drawings & MoRD technical specifications Clauses 802, 803, 900, 1202 and 1203. (including centring, shuttering, staging etc. but excluding reinforcement ) I. P.C.C grade M 10 ( using jhama brick aggregate ) (i)Nominal mix 1:3:6

123.69

Cum

9,448.65

₹11,68,703.52

Providing concrete for Plain/reinforced cement concrete in open foundation complete including formwork as per drawings & MoRD technical specification Clauses 802, 804, 805, 806, 807, 900, 1202 & 1204. (including centering, shuttering, staging etc. but excluding reinforcement) VI) R.C.C grade M-25 i)upto 5 m height

455.44

Cum

12,655.95

₹57,64,063.84

Providing & laying reinforced cement concrete in substructure as per drawings & MoRD technical specifications Clauses 800, 900, 1205.4 & 1205.5 (including centring, shuttering, staging etc. but excluding reinforcement ) II R.C.C M 25 1. For height upto 5 m

4.86

Cum

13,326.85

₹64,768.49

Supplying, fitting & placing Termo-Mechanical treated bar/Cold twisted deformed steel bar in open foundation complete as per drawings & MoRD technical specification Clauses 1002, 1005, 1010 and 1202

36.44

Ton

91,691.15

₹33,40,767.05

Supplying, fitting, & placing Termo-Mechanical treated bar/Cold twisted deformed steel bar reinforcement in substructure complete as per drawing & MoRD technical specifications Clauses 1002, 1010 & 1202

0.53

Ton

91,933.45

₹49,147.62

Providing weepholes in brick masonry/ stone masonry, plain/ reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe or uPVC pipe (110 mm OD of 6.0 Kg/cm2 pressure) extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and MoRD technical specification clauses 614, 709, 1204.3.7.

355.2

Mtr

393.75

₹1,39,860