REPAIR TO SIGN BOARD ROAD FURNITURE AND PARAPET WALL UNDER AGE (I) LANSDOWNE

Amount

S&F in repair direction sign board of any size with 4 mm thick aluminum composite panel comprising both side high intensity prismatic grade retro reflective sheeting as base and with cut out message (legends borders letters / numerals/logo etc) ht.of letters up to 150 mm & letters up to 40 nos./sqm as directed with high intensity prismatic grade retro reflective sheeting both side of boards with epoxy powder coating, including fixed over framed work of stainless steel square hollow section including excavation and PCC (1:3:6) of size 450x450x450 mm completed all as specified and directed. Note:-Rate of pedestal (vertical stand is not included in this item and same will be paid saperately under Item No 9)

S& F in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm ia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed

S&F in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed.

S&F in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions all as specified and directed.

M&L for preparation of existing bituminous surfaces, removing, dust, dirt grease and other foregion matters etc to receive the markign and M&L for thermo plastic (Reflective) line, dashes, arrows, letters etc of following size wide marking, having 2.5 mm thickness (average) of uniform surface finish conforming to BS 3262 (Part 1) 1989 read in conjunction with the MOST specification 803 clause 4.2.2 on bituminous surfaces in white/yelow clour and super imposed with glass beads confirming to BS 6088 read in conjuction with and MOST specification 803 clause 4.3.3 complete all as specified and directed:- Note: - MOST specification 803 shall be followed strictly for execution of work & suitable machine shall be used for the marking as approved by the GE. Shape & size/ patterns of marking shall be as approved by the GE.

width exc 10cm wide.

S&F in repair Plastic Speed Bump which are highly resistant to severe impacts and harsh weather condition. Its interlocking sub units make it bind perfectly into a one firm bump.the per-colored material (Black/Yellow) and UV stabilizers keep them perpetually colorful, Studded with reflectors on either side, they are clearly visible to the motorists during night. It is made of PE plastic material. Its fixing with metallic bolts/MS stud/Anchor fashner and suitable adheshive are used for installation on road . Available in Yellow and Black colours. (model No.DA 1006) Dimensions: L 730 mm, width 245 mm & Height 70 mm to be installed as per the directions of Engineer -in-charge complete all as specified and directed.

S&F convex mirror 1200 mm size made of PC material & FRP material is used in making brim & back holding plates with suitable corrosion free with necessary fixing arrangement including fix the mirror at necessary height as per site requirement, meant for road turning, intersections, curves, "T" junctions, parking lots etc. ideal for surveillance, have clear and definite mirror image, complete all as specified & directed. Note:-Rate of pedestal (vertical stand is not included in this item and same will be paid saperately under Item No 9)

Dismantling wrought iron or mild steel work or stainless steel of any description not otherwise provided for complete all as specified and directed.

M & L Stainless steel (Grade 304) railing, vertical post made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

M&L for preparation of old painted surface of brick or concrete or plastered surface of wall of any description over 10 cm width or girth and applying one coat of synthetic enamel paint of approved different tint and pattern complete all as specified and as directed.

S&F retro-reflective tape, at designated roadside locations ensuring proper alignment and secure adhesive 100 mm wide in different colour complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for walling of random rubble, uncoursed well bonded, bedded and solidly hearted, stone masonary work built in CM (1:6) complete all as specified and as directed. Note :- Only quantity of PCC bond stone to be deducted from quantity of random rubble masonary.

Description same all as item No. 13 above but except stone complete all as specified and directed. Note :- Old retreived serviceable stone under demolition item shall be used.

M&L for PCC (1:2:4) type B-1, using 20mm graded stone aggregates, as in kerb/ benching/ coping, bed plates, for fixing of hold fast, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.

Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surfacae not exceeding 20mm to face stone for Lime or sand stone and dressing of face beds and joints, as specified of random rubble walling, uncoursed or brought upto course complet all as specified and directed.

M&L for raised pointing in cement mortar (1:4) to random rubble masonary uncoursed or brought upto course complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surface in cement plaster (1:6) finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for Precast PCC (1:3:6) type C-1, using 20mm graded crushed stone aggregate as in bond stones in lieu of stone bond stones, set in cement mortar (1:6), complete all as specified and directed.

Supply Only PVC Raod Barrier 1000 mmx 800 mm x 500mm durable red colour to fill water/ sand and interlock system complete all as specified and directed.

ANANYA CONSTRUCTION CO. (BID ID -3283901)

sunshine engineering (BID ID -3279219)