Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1st₹60.6 LAccepted-Finance | 1st | Accepted-Finance accepted | |
| 2 | 2nd₹61.3 L+₹63,891.05 (1.05%)Rejected-Finance VPO PATLANDER TEHSIL SUJANPUR DISTT HAMIRPUR H P | HAMIRPUR | HIMACHAL PRADESH | 174304 | 2nd | Rejected-Finance refund | |
| 3 | 3rd₹61.5 L+₹86,164.99 (1.42%)Rejected-Finance | 3rd | Rejected-Finance refund | |
| 4 | 4th₹61.5 L+₹92,612.71 (1.53%)Rejected-Finance | 4th | Rejected-Finance refund |
Tender Value
₹58.6 L
EMD Value
₹1.2 L
Closing Date
15 Feb 2026, 6:00 pmClosed
Executive Engineer
PWD
P/L 30mm thick Bituminous Concrete on Torri nallah to Bheri Road Km. 0/00 to 2/650 and Cholthra to Kothi Road Km. 0/00 to 2/0)
2026_PWD_128034_3
PW-DPD-CB-Tender2025-26- 16802-04-dt-04.02.2026
Open Tender
Civil Works - Roads
Percentage
90 days
Dharampur
Please refer Tender documents.
13 documents required · 13 mandatory
₹2,000
Yes
₹1.2 L
Yes
16 Jul 2026
9 Feb 2026
16 Feb 2026
9 Feb 2026
15 Feb 2026
9 Feb 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing, laying, spreading and compacting stone aggregate of specific sizes 53-22.4mm (fifty three to twenty two point four millimetres) to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN (eighty by hundred Kilo Newton) in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading-III by manual means as per technical Specification Clause 405 including hauling of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. | - | Per Cubic Metre | 2,528.5 | - |
| 2 | Providing and applying primer coat with BITUMEN emulsion SS-1 using emulsion distributor @ 0.70 to 1.00 Kg per Sqmtr on the prepared bitumens surface cleaned with Hydraulic broom as per Technical Specfication. Clause 503.including carriage of materials within all leads and lifts and as per direction of Engineer -In -charge and other incidentials. The rates are inclusive of royality, GST or other taxes imposed by the Government. | 1 | Per Square Metre | 65.5 | ₹65.43 |
| 3 | Providing and applying tack coat with bitumen emulsion (RS-1) made of HPCL/ BPCL using emulsion distributor including use of Organo silane Nanotechnology of approved brand nanotac or equivalent at the rate of 0.25 Kg to 0.30 Kg per sqm (Zero point two five to zero point three zero kilogram). including carriage of materials within all leads and lifts and as per direction of Engineer -In -charge and other incidentials. The rates are inclusive of royality, GST or other taxes imposed by the Government. | 1 | Per Square Metre | 15.85 | ₹15.83 |
| 4 | Providing and laying compacted 30 mm (Thirty millimeter) thick bituminous concrete using VG-30, with the approved Organo-silane based warm mix additive (Nanotechnology) such as zycotherm or equivalent (0.1%/per tonne of bitumen) including repair of existing potholes and damaged patches with penetration macadam, over prepared base with 100-120 TPH batch type HMP producing an average out put of 75 Tonne per hours using crushed aggregate of specified grading ,premixed with bituminous binder 5.4 to 5.6% of mix including mineral filler as required transporting the Hot mix to work site laying with a hydostic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandom roller to achieve the desired compaction as per job mix formula & as per MORTH Specification No. 506, 509 complete in all respect bituminous concrete including carriage of materials within all leads and lifts and as per direction of Engineer -In -charge and other incidentials. The rates are inclusive of royality, GST or other taxes imposed by the Government. | - | Per Cubic Metre | 13,295.45 | - |
| 5 | Providing and applying 2.5 mm (two point five) millimetres thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government. | - | Per Square Metre | 474.2 | - |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.01 MB
BOQ_189145.xls
BOQ • 0.24 MB
CONDITION.rar
Additional Documents • 0.55 MB
12.rar
Tender Documents • 3.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .