SPL REPAIR TO FURNITURE AGAINST SURVEYED OFF FURNITURE AT ARMY AREA JODHPUR UNDER GE (ARMY) NO 1 JODHPUR

Amount

CHAIR DINING OFFICERS (FD/MAP-II/04) Timber shall be first class teakwood, seasoned free from knots & cracks with moisture content permissible limit as per IS-281-1973. Seat shall be made out of 75mm thick PU foam 40 density pasted with adhesive on 12mm thick BWR grade plywood covered with Fabric/Rexine as approved . Quality of Fabric/Rexine (as per sample kept at BSO Yard). PVC rings shall be screwed to each legs. Fabrication of seat shall be done at BSO Yard. All wooden portions shall be smoothened to apply best quality water base PU polish glossy finish. Polish work shall be done at BSO Yard. Rest all as per drg or as directed by EIC.

CHAIR DINING (FD-279) All as shown on drawing. All wood shall be of first class HW teak well seasoned free from knots, sap wood and cracks. Canning shall be as per Godrej Pattern with plastic cane 2mm wide half round for seat weaving and 3mm-4mm half round for border. All wooden surfaces exposed to view when placed in position shall be melamine polished with high glossy finish .Hard rubber /PVC Shoes shall be screwed to the bottom of all legs. Rest all as shown on drg and as directed by EIC.

SOFA SET 5 SEATER (FD-281) All wood work shall be first class HW well seasoned teakwood with permissible moisture contents as per IS-287-1973. Cushion for seat & back shall be 100mm thick PU foam 40 density covered with good quality, tapestry cloth not less than Rs. 350/- RM. Tapestry as per sample kept at BSO Yard. PVC shoe shall be provided to each legs. All wooden portions shall be smoothened to apply best quality water base PU polish glossy finish. Polish work shall be done at BSO Yard. Rest all as per drg or as directed by EIC.

TABLE DRESSING LADIES WITH STOOL (FD/MAP-II/07) All wood work shall be first class teak wood well seasoned free from knots/cracks. Top/side/drawer/bottom/back shall be made of 18mm thick pre-laminated MDF Board exterior grade. Full Panel MS drawer slide ivory colour powder coated of size 54 mm (H) X300mm (L) with 9 mm thick Prelaminated MDF Board BSL Exterior grade bottom and front and rear shall be 18mm thick Prelaminated MDF board BSD exterior grade. 01 Nos Std quality magnetic catcher shall be provided to each shutters. S S Handle shall be provided to drawer /Shutter as per sample kept in BSO yard. Heavy duty concealed hinges shall be provided to each shutter with lock. Std quality Cam lock connector/dowels fastening /Universal angle/PVC Corner shall be used in fabrication of body/structure of item. 1.6/0.9 mm thick PVC edging shall be provided wherever required with edge bender machine as directed by EIC. Telescopic channel shall be used in lieu of TW Runner irrespective of whatever is shown in drg. Cushion of stool dressing shall be 75mm thick & 40 density upholstered with tapestry/rexine of range not less than Rs.350/-. (as per sample kept with BSO yard) and as approved by GE. All exposed and hidden surfaces of woodwork shall be melamine polished with high glossy finish. Rest all as shown on drg and as directed by EIC.

TABLE DINING 1200X900X760 (FD/MAP-II/03) All as shown on drawing. All wood work shall be of first class hard wood teak well seasoned free from knots and cracks. Over all size of the Table shall be 1200 x 900 x 750 mm and only one stiffener in the centre of table be provided as specified in drawings. Top of the table shall be provided with 18mm thick pre-laminated particle board of grade-I exterior quality as per IS : 14587 with teak veneer shade of approved quality. TW bracket of 100 x100 x 35 mm shall be provided in all four corners and 150 x 30 x 5 mm thick MS right angle screwed with rail and leg for extra strength be provided. Nylon buffers shall be provided to the bottom of legs. All wooden surfaces shall be melamine polish with high glossy finish. Polish work shall be done at BSO Yard. Rest all as per drg or as directed by EIC.

Description of Work / Item(s)

Amount

ALMIRAH LARGE STEEL (FD/E6/MAP/18) All as shown on drawing. Overall size shall be 910mm long 490 mm wide and 1900mm high. CRCA Sheet to be used shall be 20 gauge thick for entire body, shelves and legs irrespective of what is shown on drg. Front shutters shall have two leaves. All joints, welding & fixing shall be done in accordance with the standard workmanship and specification shown in drawing. A three-way locking device controlled by a brass lock and operated by a chromium plated metallic S -Type handle - 01 No shall be provided. CP Handle and Locking arrangement with duplicate key shall be provided to the drawer and locker both. 04 Nos Plastic insert moulded screw leg cum lever (plinth Screw) used with cross nut or self tapping insert shall be provided to legs as approved by Engr-in-charge. All steel surfaces shall be powder coated. The shade of powder coating shall be as approved by GE and in dual/contrast colour. Rest all as shown on drg and as directed by EIC.

ALMIRAH MEDIUM STEEL (FD-1034) All as shown on drawing. Overall size shall be 765 mm long ,440 mm wide and 1270mm high. 20 gauge thick CRCA sheet shall be used for all steel work. A Partition in the centre of Almirah shall be provided vertically.Three shelves equally spaced shall be provided in one half towards left hand side. One top shelf on right hand side shall be provided matching with top shelf of left hand side. 60mm below top shelf shall be with 20mm dia chromium plated steel conduit pipe and shall have sockets at both ends. Front shutters shall have two leaves. All joints, welding & fixing shall be done in accordance with the standard workmanship and specification shown in drawing. A three-way locking device controlled by a brass lock and operated by a chromium plated metallic S -Type handle - 01 No shall be provided. All steel surfaces shall be powder coated. The shade of powder coating shall be as approved by GE and in dual/contrast colour. Rest all as shown on drg and as directed by EIC.

BED HARD(FD/E6/MAP/08(R)) All as shown on drawing. The complete frame work shall be made of CRCA box section with 16 gauge (Make-Apollo/Bhushan steel/Prakash surya). Long rails and short rail shall be made of 25mm x 65mm box section of 16 gauge. Frame work for foot/head board shall be 18mm x 18mm box section of 16 gauge. Bed top shall be 12mm thick BWP Marine grade IS-710 plywood. The main frame work for food/head board along with legs shall be made out of CRCA box section of 38mm x 38mm with 16 G thick. The foot board / head board shall be covered with 18mm thick prelamintated Particle board exterior grade with 01 mm thick PVC edging with edge bender machine. Detachable head rest and foot rest shall be provided with hard top. All metal work shall be powder coated (Black). All joints / gaps shall be filled with metal putty / primer before powder coating. Welding process shall be of MIG or MAG and complete . Inner hard rubber shoe shall be provided to each legs. Rest all as shown on drg and as directed by EIC.

LOCKER STEEL(FD-1029) All as shown on drawing. Overall size shall be 760mm long, 600mm wide and 1100mm high. All CRCA steel sheets shall be of 20 gauge thick. Irrespective of whatever is shown on drawing a three-way locking device controlled by a brass lock and operated by a chromium plated metallic S -Type handle - 01 No shall be provided. All steel surfaces ext/int shall be provided with two coats of synthetic enamelled paint over a coat of primer with spray machine after preparation of surfaces with putty. Hammer tone finish or colour shade as approved by GE shall be applied on body and shutters. Rest all as shown on drg and as directed by EIC.

Shri Maruti Trading Co.

Apsara Industries

BHARAT BUILDERS

BHARAT BUILDERS

Shri Maruti Trading Co.

Jain Associates