Drilling of 200 mm dia. X 650 Mtr. deep bore by DTH Rig in Rocky Formation including providing and fitting of 250 mm Ø PVC casing pipe etc.Complete at various vilages of Rajkot Dist

Name of Work: - Drilling of 200 mm dia. X 650 Mtr. deep bore by DTH Rig

in Rocky Formation including providing and fitting of 250 mm Ø PVC

casing pipe etc. Complete at various vilages of Rajkot Dist. (2nd Attempt)

Date Of Bid Up Loading 00/00/2026 on Working Hour

Last Date Of On Line Bid Submission 05/10/2026 Up To 18.00 Hours

Last Date of Tender Fee And EMD

06/10/2026 Up To 15.00 Hours

Submission(Physical)

Date of Preliminary Stage And Technical

Address:-Dn. Office Address:- Circle Office

Executive Engineer Superintending Engineer

P. H. Mech. Division P.H. Mech. Circle

G.W.S. & S.Board G.W.S. & S. Board

Jal Bhavan, Jal-Bhavan

Rajkot– 360 005 Rajkot-360005

INFORMATION TO THE TENDER

1. Estimated Cost : Rs.1844567.00

Rs.900.00 by D.D. of banks as per attached list drawn in name

of Executive Engineer P.H. Works. Div., Rajkot, payable at

2. Tender fee :

Rajkot should be submitted in electronic format only through

online (by scanning) while uploading the bid.

3. Tender validity period 180 Days (One Hundred Eighty Days)

Rs.18450.00 by D.D. or FDR/ Bank guarantee of (EMD)

banks as per attached list. drawn in name of Executive

4. E.M.D. Engineer P.H. Works. Division, Rajkot payable at Rajkot

should be submitted in electronic format only through online

(by scanning) while uploading the bid.

Minimum Amount of [1] 2.5 % of amount at the time of agreement

Security Deposit 05% [2] 2.5 % from the bill

Time of completion 05 Days for each bore from date of pin point given for

1. One Year From Date of work order

6. 2. Tender Qty. or One Year duration which later shall be

Contract Duration

3. If Tender Qty executed before one year in such cases

repeat agreement shall be executed for required qty for

remaining period at the approved rate.

0.1 % (zero point one) On The Value Of Contract Work Price

7. Compensation for delay Per Day Subject To Maximum 10 % (Ten Percent) Of The

Contract Price or estimate amount whichever is higher.

Last Date for tender,

tender fee & EMD on

8. Dt. 05/10/2026 Up to 18.00 hours

line bid submission (by

Last date of physical

9. submission for tender Dt. 06/10/2026 Up to 15.00 hours

Dt. 06/10/2026 at 15.05 hours at office of Superintending

Date of bid Opening

10. Engineer, P. H. Mechanical Circle, Jalbhavan Compound,

Saurashtra Uni. Rd. Rajkot

GWSSB reserves the right to reduce the scope of work and

11. Remarks entrust to any other agency without assigning any reason and

to reject any or all the tenders without assigning any reasons

Executive Engineer

P. H. Mechanical Division

G. W. S. & S. Board

Name of work : Drilling of 200 mm dia. X 650 Mtr. deep bore by DTH Rig

in Rocky Formation including providing and fitting of 250 mm Ø PVC

casing pipe etc.Complete at various vilages of Rajkot Dist.

Schedule showing the materials to be supplied from the Public Health Stores for the work

contracted to be executed at the rates at which they are to be charged.

Sr. Particulars Quantity Rate Unit Place of Delivery

1. 250 mm Dia PVC Casing If available FOC Sub Dn Store

(1) The persons or firm submitting the tender should see that rates in above schedule

are filled by the Executive Engineer, on the issue of tender form prior to the

submission of the tender.

(2) The materials which are not included in Schedule ‘A’ but required for the work shall

be brought by the contractor at his own cost.

(3) Carting of above materials should be done by the contractor at his own cost.

(4) The contractor should return the balance materials to the dept. otherwise recovery at

the double rate of issue rate will be effected.

Signature of Contractor Executive Engineer

P.H.Mechanical Division

Drilling of 200 mm. dia DTH Bore Drilling work

Division:- P. H. Mechanical Division, Rajkot

ScheduleB Work Detail Amount

Drilling of 200 mm dia X 650 Mtr. deep bore by

DTH Rig in Rocky Formation including

providing and fitting of 250 mm dia PVC casing

pipes in all taluka of Rajkot districts

( Rupees in Word: Eighteen Lakh Forty four thousand Five Hundred Sixty Seven only.)

Note:- (1) Labour cess at 1% (or as per prevailing rule) shall be deducted from the bills.

(2) The Price variation (Increase/Decrease) On bill Amount of bore due to

Increase / Decrease in Diesel rate will be applicable as per Formula mentioned in

Clause No- 13 mentioned in Commercial Terms and Conditions

I/We am/are willing to carry out the work at _______ % (in figures)

______________________________________ ( in words) above / below the tendered

estimated rates mentioned above.

(Strike out below whichever is not applicable)

. Offer for Below Estimated Cost : Offer for Above Estimated Cost:

1 Estimated cost Rs. 1844567.00 1 Estimated cost Rs.

2 Less _____% below Rs. _____ 2 Plus _____% above Rs. ______

3 Net Amount Rs. ___________ 3 Net Amount Rs. ____________

4 (In words Rs. _____________ 4 (In words Rs. ______________

(1)The Price variation (Increase/Decrease) On bill Amount of bore due to Increase/

Decrease in Diesel rate will be applicable as per Formula mentioned in Clause No-

mentioned in Commercial Terms and Conditions

Signature of Contractor. Executive Engineer

P. H. Mechanical Division, Rajkot.

P. H. Mech. Division - Rajkot

Name of Drilling of 200 mm dia X 650 Mtr. deep bore by DTH Rig in Rocky Formation

Work: including providing and fitting of 250 mm dia PVC casing pipes in all taluka of

Rajkot districts (2nd Attempt)

QTY. ITEM RATE PER AMOUNT

Drilling of 315 mmØ bore hole in all Rajkot district

including lowering of 250mm dia. PVC casing pipes

up to Required depth and Further Drilling of 200mmØ

Bore hole in all Types of Rocky Strata, Soft Rock &

1050 Mtr. Hard Rock formation strata by DTH Rig ( Above job 544.00 Mtr.

includes cleaning of bore hole by flushing, measuring

yield by "V" notch with Fixing the Bore Plug.)

[ 350 Mtr.X 03 Bores= 1050 Mtr.]

150 Mtr. 351 to 400 Mtr.[ 50 Mtr.X 3 Bores= 150 Mtr.] 962.00 Mtr.

150 Mtr. 401 to 450 Mtr..[ 50 Mtr.X 3 Bores= 150 Mtr.] 1157.00 Mtr.

150 Mtr. 451 to 500 Mtr.[ 50 Mtr.X 3 Bores= 150 Mtr.] 1510.00 Mtr.

150 Mtr. 501 to 550 Mtr..[ 50 Mtr.X 3 Bores= 150 Mtr.] 1510.00 Mtr.

150 Mtr. 551 to 600 Mtr..[ 50 Mtr.X 3 Bores= 150 Mtr.] 1510.00 Mtr.

150 Mtr. 601 to 650 Mtr..[ 50 Mtr.X 3 Bores= 150 Mtr.] 1510.00 Mtr.

Providing & Lowering of 250 mmØ PVC Casing Pipe

of 6 kg/cm2 as per IS Specification No.4985/2000 &

36 Mtr. with one coupler. 1375.46 Mtr.

[Aprrox 12 Mtr.X 3 Bores= 36 Mtr.]

Price Difference

Z =bill amount of the particular bore

Rs W= Weightage of the Diesel i.e. 52% Rs

D1 = Rate of Diesel at the time of pin-point given

D2 = Star Diesel Rate shall be taken at the time of uploading

Signature of Contractor. Executive Engineer

P. H. Mechanical Division, Rajkot.