Supply, Fixing and Installation of Custom Made Furniture for Interior Works For 382 Student Rooms in Student Dorm at Indian Institute of Management Ahmedabad

Amount

STUDENT ROOM FURNITURE

ERGONOMETRIC CHAIR - WITH ADJUSTABLE ARMS, WITH LUMBAR SUPPORT: Providing and fixing Chair having Centre Tilt Mechanism with Tilt Locking and upright position lock facility designed with:360 degree revolving type with seat height adjustment knob and Tilt tension adjustment. Chair should have pneumatic height adjustment with pneumatic gas lift. BASE: 640 mm Nylon base. 5 Nylon castors with embedded metal rings and Ribs. The base can sustain 400kg static pressure. GAS COLUMN: 100 mm Stroke Gas Operated BIFMA Standard . 100000 times up and down TILTING MECHANISM: UP AND DOWN AND REVOLVABLE. Push back mechanism. ARMS: Adjustable Arms SEAT and BACK: Made of 12mm thick plywood with waterfall curvature with t (T Nut) and High density foam. Hot pressed plywood and polyurethane foam upholstered with foam laminated polyester mesh fabric and covered at bottom with injection moulded poly-propylene seat cover. The back is injection moulded nylon and is upholstered with high tenacity mesh fabric. The backrest has a poly-propylene cover. PU: High quality durable PU . 1.0mm Thickness.7 Layer Ply Adjustable Lumbar Support The cushioned lumbar support promotes a healthy back posture. Move the lumbar support up/down and forward/backward (by rotating the knob) to find your comfort position. CHAIR HEIGHT MAX : 900-1010 mm CHAIR WIDTH : 500 mm SEAT HEIGHT MIN : 420 mm Maximum 510 mm SEAT WIDTH : 500 mm SEAT DEPTH : 490 mm The above dimensions are out to out approx. dimensions. The product shall be complete as per the BOUGHT OUT FURNTIRUE LIST and specification under the guidance of Engineer in Charge.

MAGNETIC WRITING GLASS: Fabricating, Supplying, Fixing & Placing of MAGNETIC writing Glass with a Ghana teak wood framed, wall mounted Magnetic annealed SGG PlanilaqueEvolution (premium GRIHA rated lacquered glass from Saint-Gobain - 6 mm thick ), of approved colour by Architect/ Client / Customer, fixed with SGG ULTRAFIX (compatible neutral core silicon / double sided tape) with backing of GI sheet (0.5,0.75 or 1.25mm) on a perfectly levelled surface created using a hardwood frame work as per drawing and fixed to the wall using fasteners / Screws, etc as required. Lacquered glass must be made industrially (via curtain coating process); opaque (if viewed against a support wall), coated with PU lacquer (50 micron thick); colour consistency (measured by Minolta spectrophotometer CM5081); highly durable (passes PERSOZ hardness test for minimum 220 oscillations); humid resistant (conforms to BS EN 1036 1999); environmentally friendly (no lead, no arsenic, no copper, no formaldehyde); appropriate recycled content (12% post industrial / 6% post consumer); compressive strength (1000 MPa) & tensile strength (40 MPa),same as float glass;

MAGNETIC WRITING GLASS 01 STUDENT ROOM TABLE SIDE:Approx dimension of the furniture is 1500 X 40 X 945 ( size as per drawings in case of variation )

MAGNETIC WRITING GLASS 03 STUDENT ROOM BED SIDE:Approx dimension of the furniture is 1200 X 40 X 665 ( size as per drawings in case of variation )

CURTAIN ROD STUDENT ROOMS: Supplying & Fixing in position Curtain Rod of size as mentioned below comprising of S.S. Hollow Tube (S.S. 202 Satin Finish) fixed with S.S.SOLID Flat Brackets (SS 202 Brush Finish) of size & number as shown in drawing including welding, grinding, screws, fasteners, all necessary fixing arrangement etc. complete as per design and drawing. Approx. dimension of the furniture is 1930 MM ( size as per drawings in case of variation )

CURTAIN STUDENT ROOMS: Fabricating, Supplying & Fixing in position Set of 2 Curtains for the opening size of width 2000mm and curtain height of 2800mm Curtain Header: Loop Top

DUSTBIN: Fabricating, Supplying, Fixing & Placing in position Stainless Steel Grade 304 dustbin. The Dustbin must be using perforated SS Sheet of 1.2 mm thickness. Perforations should be only on the bottom half of the container. Shape and size to be as per sampling. The dustbin is without any pedal or swing lid. There should be no dents in the surface, should be anti corrosive and highly rust resistant and easy to clean. The capacity of the container is 18 -20 litres. The bottom of the dustbin is lined with superior grade Rubber Material to ensure a long life span of the rubber and that the dustbin stays firmly in place. The top edge should with bend ss sheet, so as to protect the hand from sharp edges. The size of the dust bin is approx. 10"x14' as per image

CLOTH HANGER ROD: Fabricating, Supplying, Fixing & Placing in position Stainless Steel Grade 304 Cloth Hanger Rod. Shape and size to be as per drawing and sampling. There should be no dents in the surface, should be anti corrosive and highly rust resistant and easy to clean.

STUDENT ROOM FURNITURE (Differently abled friendly)

ERGONOMETRIC CHAIR - WITH ADJUSTABLE ARMS, WITH LUMBAR SUPPORT: Providing and fixing Chair having Centre Tilt Mechanism with Tilt Locking and upright position lock facility designed with:360 degree revolving type with seat height adjustment knob and Tilt tension adjustment. Chair should have pneumatic height adjustment with pneumatic gas lift. BASE: 640 mm Nylon base. 5 Nylon castors with embedded metal rings and Ribs. The base can sustain 400kg static pressure. GAS COLUMN: 100 mm Stroke Gas Operated BIFMA Standard . 100000 times up and down TILTING MECHANISM: UP AND DOWN AND REVOLVABLE. Push back mechanism. ARMS: Adjustable Arms SEAT and BACK: Made of 12mm thick plywood with waterfall curvature with t (T Nut) and High density foam. Hot pressed plywood and polyurethane foam upholstered with foam laminated polyester mesh fabric and covered at bottom with injection moulded poly-propylene seat cover. The back is injection moulded nylon and is upholstered with high tenacity mesh fabric. The backrest has a poly-propylene cover. PU: High quality durable PU . 1.0mm Thickness.7 Layer Ply Adjustable Lumbar Support The cushioned lumbar support promotes a healthy back posture. Move the lumbar support up/down and forward/backward (by rotating the knob) to find your comfort position. CHAIR HEIGHT MAX : 900-1010 mm CHAIR WIDTH : 500 mm SEAT HEIGHT MIN : 420 mm Maximum 510 mm SEAT WIDTH : 500 mm SEAT DEPTH : 490 mm The above dimensions are out to out approx. dimensions. The product shall be complete as per the BOUGHT OUT FURNTIRUE LIST and specification under the guidance of Engineer in Charge.

MAGNETIC WRITING GLASS: Fabricating, Supplying, Fixing & Placing of MAGNETIC writing Glass with a Ghana teak wood framed, wall mounted Magnetic annealed SGG PlanilaqueEvolution (premium GRIHA rated lacquered glass from Saint-Gobain - 6 mm thick ), of approved colour by Architect/ Client / Customer, fixed with SGG ULTRAFIX (compatible neutral core silicon / double sided tape) with backing of GI sheet (0.5,0.75 or 1.25mm) on a perfectly levelled surface created using a hardwood frame work as per drawing and fixed to the wall using fasteners / Screws, etc as required. Lacquered glass must be made industrially (via curtain coating process); opaque (if viewed against a support wall), coated with PU lacquer (50 micron thick); colour consistency (measured by Minolta spectrophotometer CM5081); highly durable (passes PERSOZ hardness test for minimum 220 oscillations); humid resistant (conforms to BS EN 1036 1999); environmentally friendly (no lead, no arsenic, no copper, no formaldehyde); appropriate recycled content (12% post industrial / 6% post consumer); compressive strength (1000 MPa) & tensile strength (40 MPa),same as float glass;

MAGNETIC WRITING GLASS 02 STUDENT ROOM TABLE SIDE (DIFFRENTLY ABLED):Approx. dimension of the furniture is 1500 X 40 X 945 ( size as per drawings in case of variation )

MAGNETIC WRITING GLASS 03 STUDENT ROOM BED SIDE:Approx dimension of the furniture is 1200 X 40 X 665 ( size as per drawings in case of variation )

CURTAIN ROD STUDENT ROOMS: Supplying & Fixing in position Curtain Rod of size as mentioned below comprising of S.S. Hollow Tube (S.S. 202 Satin Finish) fixed with S.S.SOLID Flat Brackets (SS 202 Brush Finish) of size & number as shown in drawing including welding, grinding, screws, fasteners, all necessary fixing arrangement etc. complete as per design and drawing. Approx. dimension of the furniture is 1930 MM ( size as per drawings in case of variation )

CURTAIN STUDENT ROOMS: Fabricating, Supplying & Fixing in position Set of 2 Curtains for the opening size of width 2000mm and curtain height of 2800mm Curtain Header: Loop Top

DUSTBIN: Fabricating, Supplying, Fixing & Placing in position Stainless Steel Grade 304 dustbin. The Dustbin must be using perforated SS Sheet of 1.2 mm thickness. Perforations should be only on the bottom half of the container. Shape and size to be as per sampling. The dustbin is without any pedal or swing lid. There should be no dents in the surface, should be anti corrosive and highly rust resistant and easy to clean. The capacity of the container is 18 -20 litres. The bottom of the dustbin is lined with superior grade Rubber Material to ensure a long life span of the rubber and that the dustbin stays firmly in place. The top edge should with bend ss sheet, so as to protect the hand from sharp edges. The size of the dust bin is approx. 10"x14' as per image

CLOTH HANGER ROD: Fabricating, Supplying, Fixing & Placing in position Stainless Steel Grade 304 Cloth Hanger Rod. Shape and size to be as per drawing and sampling. There should be no dents in the surface, should be anti corrosive and highly rust resistant and easy to clean.

MACRO ENTERPRISES

NEW CONCEPT