CE CHZ/AMB/T-05/2019-20

Amount

Schedule 'A'Section-I (Building/Structure Works)

Total amount of Sch 'A' Sec I (Building/Structure Works)

Schedule 'A'Section-II (Site Clearance, Devolpment & Earthwork)

Total amount of Sch 'A' Sec II (Site Clearance, Devolpment & Earthwork)

Schedule 'A'Section-III (INTERNAL ELECTRIFICATION WORKS)

Total amount of Sch 'A' Sec III (Internal Electrification Works)

Schedule 'A'Section-IV (INTERNAL WATER SUPPLY, HOT WATER SUPPLY WORKS)

Total amount of Sch 'A' Sec IV ( INTERNAL WATER SUPPLY, HOT WATER SUPPLY WORKS)

Schedule 'A'Section-V (SEWAGE DISPOSAL WORKS

Total amount of Sch 'A' Sec V (Sewage Disposal Works)

Schedule 'A'Section-VI (AREA DRAINAGE WORKS)

Total amount of Sch 'A' Sec VI (Area Drainage Works)

Schedule 'A'Section-VII (ROAD PATH & CULVERTS WORKS)

Total amount of Sch 'A' Sec VII (Road Path & Culverts Works)

Schedule 'A'Section-VIII (SECURITY WALL, GATE & SECURITY FENCING WORKS)

Total amount of Sch 'A' Sec VIII (Security Wall, Gate & Security Fencing Works)

Schedule 'A'Section-IX (EXTERNAL WATER SUPPLY WORKS)

Total amount of Sch 'A' Sec IX (EXTERNAL WATER SUPPLY WORKS)

Schedule 'A'Section-X (EXTERNAL ELECTRIC SUPPLY AND LIGHTENING PROTECTION WORKS)

Total amount of Sch 'A' Sec X (EXTERNAL ELECTRIC SUPPLY AND LIGHTENING PROTECTION WORKS)

Schedule 'A'Section-XI (CONDUIT FOR TV / TELEPHONE /INTERCOM / LAN WORKS)

Total amount of Sch 'A' Sec-XI (CONDUIT FOR TV/ TELEPHONE / INTERCOM / LAN WORKS)

Schedule 'A'Section-XII ( GROUNDS AND HARD STANDING WORKS)

Total amount of Sch 'A' Sec-XII (GROUNDS AND HARD STANDING WORKS)

Schedule 'A'Section-XIII ( ALUMINIUM PARTITION AND ALLIED WORKS)

Total amount of Sch 'A' Sec-XIII (ALUMINIUM PARTITION AND ALLIED WORKS)

Schedule 'A'Section-XIV (Misc Items of Works) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only.

INTERNAL ELECTRIC SUPPLY WORKS

Point wiring using approved colour coding as per IS, with stranded copper conductor 1.5 Sq. mm (nominal area), single core, flame retardant low smoke (FRLS), PVC insulated and unsheathed cable 1100 volts grade, ISI 694 marked TEC and FIA approved in and including heavy duty PVC concealed conduit and its fittings, ISI marked, PVC junction boxes, mild steel sunken boxes (Terminal boxes) with earth dolly, duly painted internally & externally with two coats of anti-corrosive paint over a coat of red oxide primer, covered with 3mm thick hylem sheet including flame retardant low smoke (FRLS) PVC insulated unsheathed stranded copper conductor 1.5 Sq. mm (nominal area) single core cable as earth continuity conductor to common earth and connected to earth dolly complete all as specified, for the following: -

(a) One light point controlled by one switch or one (Ceiling/ Wall/ Exhaust) fan point controlled by one switch or one switch and regulator

(b) One 3 pin 5 Amps socket outlet on independent board

( c) One 3 pin 5 Amps socket outlet on same board

(d) One socket outlet, 16 Amp, independent, with 2.5 sqmm (nominal area) cable for phase & neutral and 2.5 sqmm (nominal area) cable as earth continuity conductor.

(e) One socket outlet, 16 Amp, independent, with 4.0 sqmm (nominal area) cable for phase & neutral and 4.0 sqmm (nominal area) cable as earth continuity conductor.

All as per item srl No 29 hereinbefore but one light point controlled by two 2 way switches.

Point wiring for flame proof light fitting using approved colour coding as per IS, with stranded copper conductor 1.5 Sq. mm (nominal area), single core, flame retardant low smoke (FRLS), PVC insulated and unsheathed cable 1100 volts grade, ISI 694 marked TEC and FIA approved in and including heavy duty steel conduit and its fittings, ISI marked, mild steel sunken boxes (Terminal boxes) with earth dolly, duly painted internally & externally with two coats of anti-corrosive paint over a coat of red oxide primer, covered with 3mm thick hylem sheet including flame retardant low smoke (FRLS) PVC insulated unsheathed stranded copper conductor 1.5 Sq. mm (nominal area) single core cable as earth continuity conductor to common earth and connected to earth dolly complete all as specified.

Sub main wiring using approved colour coding as per IS with five single core, PVC insulated, unsheathed FRLS multistranded copper conductor cables of size 10 sqmm (nominal area) 1100 volts grade, drawn through & including heavy duty PVC concealed conduit of suitable bore and connected to main board complete all as specified and directed. Note: (i) Five runs of each of one RM of 10 sqmm cable together shall be considered as 1 running meter for payment purpose.

Sub main wiring using approved colour coding as per IS with three single core, PVC insulated, unsheathed FRLS multistranded copper conductor cables of size 10 sqmm (nominal area) 1100 volts grade, drawn through & including heavy duty PVC concealed conduit of suitable bore and connected to main board complete all as specified and as directed. Note: (i) Three runs of each of one RM of 10 sqmm cable together shall be considered as 1 running meter for payment purpose.

Sub main wiring using approved colour coding as per IS with three (two for main & one for earth) single core, PVC insulated, unsheathed FRLS multistranded copper conductor cables of size 6 sqmm (nominal area) 1100 volts grade, drawn through & including heavy duty PVC concealed conduit of suitable bore and connected to main board complete all as specified and as directed. Note: (i) Three runs of each of one RM of 6 sqmm cable together shall be considered as 1 running meter for payment purpose.

Sub main wiring using approved colour coding as per IS with three (two for main & one for earth) single core, PVC insulated, unsheathed FRLS multistranded copper conductor cables of size 4 sqmm (nominal area) 1100 volts grade, drawn through & including heavy duty PVC concealed conduit of suitable bore and connected to main board complete all as specified and as directed. Note: Three runs of each of one RM of 4 sqmm cable together shall be considered as 1 running meter for payment purpose.

Sheet metal enclosure MCB DB, 8 ways SPN, 240 volts,IP-43 protection, double door type grouting in wall in cement mortar, flush mounted, suitable for and with 200 Amp rated bus bar complete all as specified and as directed.

Sheet metal enclosure MCB DB, 6 ways SPN, 240 volts,IP-43 protection, double door type grouting in wall in cement mortar, flush mounted suitable for and with 200 Amp rated bus bar complete all as specified and as directed.

Sheet metal enclosure MCB DB, 4 ways SPN, 240 volts,IP-43 protection, double door type grouting in wall in cement mortar, flush mounted, suitable for with 200 Amp rated bus bar complete all as specified and as directed.

Sheet metal enclosure MCB DB, 4 ways TPN, 415 volts,IP-43 protection, double door type grouting in wall in cement mortar, flush mounted, suitable for with 200 Amp rated bus bar complete all as specified and as directed.

Sheet metal enclosure MCB DB, 6 ways TPN, 415 volts,IP-43 protection, double door type grouting in wall in cement mortar, flush mounted complete suitable for with 200 Amp rated bus bar complete all as specified and as directed.

MCB SP, 230volt , 50 Hzs, 6 to 32 A, 10 KA , "C" series complete all as specified and directed.

MCB SPN, 'C' Curve as incomer, 220 volt , 50 Hzs, 16 Amps, 10 KA ,complete all as specified and directed.

MCB SPN, 'C' Curve as incomer, 220 volt , 50 Hzs, 20 Amps, 10 KA ,complete all as specified and directed.

MCB SPN, 'C' Curve as incomer, 220 volt , 50 Hzs, 32 Amps, 10 KA ,complete all as specified and directed.

MCB SPN, 'C' Curve as incomer, 220 volt , 50 Hzs, 40 Amps, 10 KA , complete all as specified and directed.

MCB SPN, 'C' Curve as incomer, 220 volt , 50 Hzs, 50 Amps, 10 KA, complete all as specified and directed.

MCB TPN 4 pole C Curve as incomer, 220 volt , 50 Hzs, 40 Amps, 10 KA ,complete all as specified and as directed.

MCCB TPN as incomer, 440 volt , 50 Hzs, 100 Amps, 36 KA , complete all as specified and directed.

MCCB TPN as incomer, 440 volt , 50 Hzs, 63 Amps, 25KA , complete all as specified and directed.

Ceiling fan complete with electronic type regulator and accessories 230 V,1400 mm sweep, conforming to IS-374-2019 complete all as specified and directed.

Exhaust fan AC single phase 230/ 240 V of size 300 mm sweep 1400 RPM with louver complete all as specified and directed. Make:Havells Turbo Force SP OR Equivalent make as per Appendix 'B'.

Exhaust fan AC single phase 230/ 240 V of size 450 mm sweep 900 RPM with louver complete all as specified and directed. Make:Havells Turbo Force SP OR Equivalent make as per Appendix 'B'.

LED bulb 7 watt 230 volts AC 50 Hz Retrofit B22 base for lamp holder or equivalent as per Appendix 'B' complete all as specified and directed. Make: C&S Chandra Series Lumeno LED Lamps Cat Part No LTHPLEDLAMP7W/B22 or equivalent as per Appendix 'B' .

LED tube light fitting ,1x18/20 watt LED 230v energy efficent Batten fitting, with Driver etc complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible cable copper conductor including 18/20 watt LED tube rod complete all as specified and directed. Make:- HPL LED Cadila Plus Series Cat Part no. HLPLEDCADPLC20CW or equivalent as per Appendix 'B'

LED tube light fitting,1x 9 /10 watt LED 230v energy efficent Batten fitting, with Driver etc complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible cable copper conductor including 9 / 10 watt LED tube rod complete all as specified and directed. Make: HPL LED Cadila Plus Series Cat Part no.HLPLEDCAD09WW or equivalent as per Appendix 'B'

LED tube light fitting ,1x 18/20 watt LED 230v energy efficent Batten fitting, with Driver etc complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible cable copper conductor including 18/20 watt LED tube rod complete all as specified and directed.

Switch flame proof rotary type with termination box in LM6, 16 Amp, single pole 250 Volts complete all as specified and directed.

Building Security Light Pressure die cast housing with epoxy power coated dark graphite grey colour finish. Prismatic polycarbonate cover with individual LED lenses. IP65, 20 Watt, with GI pipe bracket of size 40mm dia complete all as specified and directed. Make: C&S Draco Series Cat Part No LTESS20WLED or equivalent as per Appendix 'B'

Surface mounted wall Mirror LED light Compact & sturdy 9 watt LED decorative fixture with anti glare polycarbonate diffuser, multi purpose lighting solution & applications .all accessories & fixtures, internally prewired and connecting by providing copper flexible wire 23/.0076 mm twin core upto fitting, complete all as specified and directed. Make: HPL Candila Cat part No.HLPLEDCAD09CW or equivalent as per Appendix 'B'

Sheet metal enclosure with a two pin and earth plug socket complete with one single pole MCB 20 Amp (For AC) complete all as specified and directed.

Earthing complete with and including galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm surrounded by a mixture of charcoal and salt in alternate layers burried directly in ground vertically in a pit of depth not less than 2.25 m deep below ground level with top edge of earth plate at a depth of not less than 1.5 m below ground level, connected with and including 4 mm galvanised earth lead wire as earthing lead by means of bolts, nuts, check nuts and washers made out of galvanised iron, 20 mm bore (medium grade) GI pipe for protection of earthing lead, 20 mm bore (medium grade) GI pipe for watering with funnel, wire mesh and including necessary excavation and earth work, PCC 1:2:4 type B-1 pit and 50 mm thick RCC M-25(Design mix) reinforced with XPM (weight not less than 3 kg/sq m) pit cover, C.I frame, charcoal and comman salt filling in alternate layers, complete all as shown and specified in electrical plate No. 5 of SSR Part-I (1991). Note : 1. Earth chamber shall be constructed at least 1.50 metre away from the top of earth electrode, the earth pit and pipe for watering shall be provided in slanting manner. 2. The unit rate includes for protecton pipe 20mm and GI earth wire 4mm from top of earth plate upto 7.50 metre above ground level.

LED down light panel of 20W made from extruded aluminium housing frame , wall mounted type of size 300mm x 300mm complete all as specified and directed. Make:- Jaquar Cat Part No. LSVR01S020XN or equvalent as per Appendix 'B'.

Recess mounting LED panel luminaire 34/36 watt of size 595 x 595 x 70mm, aesthetically designed, ultra-modern with high brightness SMD LEDs as light source suitable of any type of ceiling including all fixing arrangement complete all as specified and directed. Make Havells Cat Part No. PLUTONEO2X2PLR34WLED857S or equvalent as per Appendix 'B'.

ROAD, PATH AND CULVERTS

Wet mix macadam (WMM), 75 mm thick (compacted thickness) with crushed stone aggregates (Sand stone, flint or quartzite) of grading 2 (63 to 40mm size) or grading 3 (50 to 20mm size) and specification as per clause 406 of MORTH including premixing the material with water at OMC in mechanical mix plant , carrying the material by tippers to site including all leads and lifts and spread/ laid using mechanical paver, watered, rolled and consolidated to required gradient and camber and rolled with vibratory type power roller of capacity 8 to 12 tonne to achieve the desired density complete all as specified and directed.

60mm thick machine pressed precast concrete (of M-35 grade) interlocking paver block, manufactured in an automatic plant working on vibration and simultaneous hydraulic compression from top, (with grey cement and pigment) any shape and size confirming to IS 15658-2006 laid over and including 25mm thick cushion of coarse sand & filling the joints after laying complete all as specified and as directed.

Hot aplplied thermoplastic road marking inclusive type I reflectorising glass beads as per table 800-3, 800-4 of MORTH applied in uniform thickness of at least 1.5mm and spread uniformly with reflectorising glass beads type-II @ 250 gms per sqm with a road marking machine as per IRC:35,in white or golden yellow colour with traffic diversion arrangemets if required, complete all as specified and as directed. Make : RELIANCE/ ASIAN PAINTS or equivalent as approved by GE

Road stud / cat eye ABS material body of size 100 x100 x 20mm with two highly reflective reflectors fitted in the body, fixed with MS pin & approved epoxy adhesive as per manufacturer instruction on road, of colour as directed complete all as specified and as directed. Make : Greenlite/ Dark Eye or equivalent as approved by GE

Road safety convex mirror 80cm dia for road safety and shop security with adjustable brackets fixed on MS tube of size 60mm dia medium grade duly painted powder coated, 1.2m high fixed in PCC as per manufacturer instruction on road side or as directed complete all as specified. Make : M3/Greenlite/ Dark Eye or as approved by GE.

Solar road stud of size 128 x134 x 20-25mm made from aluminium alloy and construction, solar powered by mono crystal solar panel with one high capacity Ni-Cd rechargeable battery to be fixed on road with approved epoxy adhesive as per manufacturer instruction of colour Red/ amber/green as desired complete all as specified and as directed. Make : Tata BP/ 3M or as approved by GE.

Solar Delinators of size 1000 x 47mm made from polycarbonate and toughened aluminium body with 80mm dia pipe comprising of 4 super light LEDs which give 360 degree viewing with solar panel 2.5V, 120mm aprox and 1.25V rechargeable battery- 01 No, to be fixed on road as per manufacturer's instructions complete all as specified and as directed. Make: Tata BP/ 3M or as approved by GE.

INTERNAL WATER SUPPLY WORKS

Bib tap cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed. Make: -ESSCO Cat Part NO-DLX -511 or equivalent model in makes mentioned in Appendix 'B' of tender document.

Bib tap cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified & directed. Make: -ESSCO Cat Part NO- DLX-512 or equivalent model in makes mentioned in Appendix 'B' of tender document.

Pillar tap, cast copper alloy, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot or Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed suitable for 15 mm bore pipe complete all as specified and directed. Make: -ESSCO Cat Part NO-DLX -507 or equivalent model in makes mentioned in Appendix 'B' .

Angle stop valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends, for iron pipe or for unions of 15mm bore complete all as specified & directed. Make: -ESSCO Cat Part NO-DLX -526 or equivalent model in makes mentioned in Appendix 'B'

Brass Chromium plated shower rose with swivel joints fancy type , 15mm bore pipe with CP arm concealed type with CP cup with 15mm dia shower body, complete all as specified and directed. Make: -ESSCO Cat Part NO-EQS-542A (Shower Rose) & Cat Part No ALE -536A (Shower Arm) or equivalent model in makes mentioned in Appendix 'B' .

Wall mixer telephonic type cast copper alloy with capstain head, fancy type chromium plated screwed down, high pressure, screwed for 15mm bore iron pipe or brass ferrule complete all as specified and directed by Engineer-in-Charge. Make: -ESSCO Cat Part MQT-521 or equivalent model in makes mentioned in Appendix 'B' .

LIGHTENING PROTECTION

Earthing with 600 x 600 x 6mm galvanised steel earth plate electrode buried vertically in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the plate at a depth of not less than 1.5m below ground level, connected to and including G.I. Strip of size 32x6 mm by means of bolts,nuts and check nuts and washers of galvanised steel to the extent of 7.5 metres as earthing lead and connecting to the eqpt/machinery etc. incl charcoal dust and common salt packed all around the earth plate in alternate layer in the earth pit all as per electrical plate No. 3 of SSR Part I-2009 including chamber made up of PCC 1:2:4 type B1 with M.S. angle iron frame, C.I. Cover, 20mm dia light grade G.I. Pipe from top edge of the earth plate upto M.S. funnel with wire mesh provided inside the concrete earth pit for watering arrangement incl excavation and earth work in any type of soil and testing complete all as specified and directed. Note :- GI Strip more than 7.5 m will be measured and paid for separately

PCC (1:2:4), type B-1 block, size 400 x 400 x 300 mm for holding GI pipe post for air terminal complete all as specified and directed.

CONDUIT FOR TV /TELEPHONE /INTERCOM/LAN

Socket outlet for Tele/LAN piano flush type ISI marked with valid CML No complete all as specified and directed.

Socket outlet for TV piano flush type ISI marked with valid CML No complete all as specified and directed.

SUMMER APPLIANCES

Refrigerator Top mounted deep freezer, double door with electric driven (single phase) of capacity 321 litres or nearest higher capacity as approved by GE frost free, five star rating complete all as specified and directed . Make:- Samsung or equivalent model in makes mentioned in Appendix 'B' .

Refrigerator, Top mounted freezer, single door with electric driven (single phase) of capacity 192 litres or nearest higher capacity frost free, five star rating complete all as specified and directed. Make:- Samsung or equivalent model in makes mentioned in Appendix 'B' .

Supply installation commissioning hard top Deep freezer single phase 240 Volts 50 HZs of cap 120 Litres complete all as specified and directed.

Supply installation commissioning of hard top Deep freezer single phase 240 Volts 50 HZs of cap 300 Litres complete all as specified and directed.

Supply, instalation, testing and commissiong of Water cooler partially stainless steel, electric driven single phase having approx storage and nominal cooling cap 80/40 litre complete all as specified and directed.

Supply and installation desert cooler electric driven (single phase) having nominal air flow capacity of 4000 cfm per hour (or nearest size) MS body with all fittings and fixtures complete all as specified and directed.

Supply,installation, testing and commissioning air cooled split unit Air Conditioner electric driven single phase of cap 1.5 TR having BEE 3 star rating, inverter type including suitable length of copper tube , drain pipe and stand for outdoor unit complete all as specified and directed.

Supply, installation, testing and commissionig air cooled split unit Air Conditioner electric driven single phase of cap 2.0 TR having BEE 3 star rating, inverter type including suitable length of copper tube , drain pipe and stand for outdoor unit complete all as specified and directed.

Voltage stabilizer for automatic operation single phase naturally air cooled indoor type and designed for input variation between 170 V to 250V with output voltage stabilized at 230 V with accuracy of + 2.5 % and of capacity 2 KVA (for Water Cooler) complete all as specified and directed.

Voltage stabilizer for automatic operation single phase naturally air cooled indoor type and designed for input variation between 170 V to 250V with output voltage stabilized at 230 V with accuracy of + 2.5 % and of capacity 4 KVA (1.5 ton AC) complete all as specified and directed

Voltage stabilizer for automatic operation single phase naturally air cooled indoor type and designed for input variation between 170 V to 250V with output voltage stabilized at 230 V with accuracy of + 2.5 % and capacity 5 KVA (2 ton AC) complete all as specified and directed

Cross arms bracings supports clamps and back plates fabricted from structural steel sections,conforming to IS, including nuts bolts washers welding bending cold or hot drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat and two coats of synthetic enamel paint complete all as specified and directed.

EXTERNAL WATER SUPPLY

Centrifugly cast ductile iron pressure pipe with socket spigot ends ISI marked in standard length of 5.5 or 6 m of class K-9 for push on joint (Gasket D jointing) with cement mortar lining in pipe of size 100 mm bore including material and labour for making push on joints complete all as specified and directed..

Supplying, installation, testing and commissioning manufacturer's factory assembled and tested, electric motor driven pump set, comprising of heavy duty, end draw out type, single stage centrifugal pump, Copper wound motor,cast iron body with broonze impellor, casing ring, sleeves etc coupled to electric motor of suitable capacity by means of flexible coupling and mounted on a common fabricated MS base frame. The scope of work also includes the PCC foundation of the pump set as per manufacturer's recommendations, GI earthing of pump, MS bolts with nuts and anti vibrating pads. The scope of work also includes the following:- (a) Suitable HP, TEFC squirrel cage induction motor with class `F' insulation, 2900 rpm, operating on 415 + 10% volts, 3 phase, 50 Hz A.C. supply. (b) Pump capable of delivering 1100 ltrs per minute at 30 metre head, of capacity as recommended by manufacturer (but not less than 7.5 HP) (c) Suitable dia of GI suction pipe heavy grade in suitable length but not less than 5 metre and taper connecting piece & NRV of suitable size. (d) GI delivery pipe of suitable dia heavy grade of suitable length but not less than 2 metre and taper connecting piece.

Cast iron Foot valve suitable for 100mm bore pipe confirming to IS 4038 complete all as specified and directed.

Construction of brick masonary valve pit of 900 mm x 900mm x 900mm (internal size) in cement mortar 1:4, with 3mm thick mild steel sheet cover and angle iron frame of size 40mm x 40mm x 6mm including provision of suitable hold fasts to hold the frame, locking arrangement and lifting handle, duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Construction of brick masonary valve pit of 600 mm x 600mm x 600mm (internal size) in cement mortar 1:4, with 3mm thick mild steel sheet cover and angle iron frame of size 40mm x 40mm x 6mm including provision of suitable hold fasts to hold the frame, locking arrangement and lifting handle, duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Supplying, installation, testing and commissioning of Eco friendly, silent diesel engine driven generating set of 10 KVA or nearest higher capacity at 0.8 power factor or nearest higher size, 415/430 volts AC, 3 phase, 50 Hz, 4 wire, 0.8 power factor directly coupled alternator and engine, water cooled, comman base platform with floor mounted fuel tank and including all excavation, PCC foundation, anti-vibration pads/ dampers including standard control panel as per manufacturer's instructions as directed by manufacturer and other accessories and comprising of following :- (a) Engine : Eco friendly for emmission and noise (CPCB NORMS COMPLIANCE) diesel engine 4 stroke and cylinder should be as per manufacturer's design confirming to BS standard developing suitable BHP (not less than 18 BHP) 1500 RPM, turbocharged after cooling complete under NTP condition with a provision for 10% over load for one hour on 12 hours running comprising the following :- (i) Fly wheel with starter ring for generating set (ii) Dry type air filter (iii) Lube oil cooler assembly with accessories (iv) Exhaust air manifold (v) Exhaust silencer (vi) Expension bellow (b) Alternator : Brushless type suitable for direct coupling to engine, self excited, self regulated with fast response thyristor type electronic automatic voltage regulator for output voltage within desired limits (+1%) dynamically balanced 400/415 volts AC, 3 phase, 50 Hz, 4 wire, 0.8 power factor lagging 10 KVA or nearest size on higher side, 1500 RPM, star connected (4 wire) screen protected drip proof

enclosures, air cooled with radial fan mounted on rotor with insulation class F/H all as per BS-2613, IS-4722 with following accessories:- (i) One MS frame suitable for mounting of engine and alternator. (ii) One fuel tank of suitable capacity for 8 to12 hours continuous running complete with fuel gauge, inlet/outlet connections, drain plug etc to be mounted suitable on angle iron frame or grouted on wall as per manufacturer's instructions. (iii) 01 No. 12 volts DC battery MAKE : Exide of 160 AH capacity SMF type with copper leads and terminal lugs of suitable size. (iv) One set of AVM pads fitted on base frame. (v) Adequate ventilation to meet air requirement for combustion and heat removal with a provn of blower. (vi) Emergency stop push button outside the container. (vii) Provn of light inside the canopy providing a FTL fitting. (c) Foundation : Cost of PCC foundation as per manufacturer's design/instructions included in the cost of generator set. (d) Supplying installation, commissioning and testing of accoustic enclosure suitable for DG shall be as under: (i) Fabricated out of CRCA sheet of suitable thickness. Polyester based powder coated internally and externally with lockable type door handle. All nuts, bolts and hardware and zinc coated. (ii) Sheet metal components are hot dip seven tanks pretreated. iii) The doors are gasketed with EPDM gaskets. (iv) Sound proofing with high quality rock wool/mineral wool confirming to TS 8183 of 50 mm thickness.

Cast iron air release valves with two air outlets 100mm bore and fixing up in DI water supply mains complete all as specified and directed.

Ductile iron fittings such as bends (any type, radius and angle) Tapers any type (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch, 'Y' junction, double branch, cross (all sockets or socket and spigot) collars, tail pieces with one end flanged (integrally cast) and one end socket/spigot caps and plugs suitable upto 200 mm bore ductile iron pressure pipes of K-9 classification and push on flexible rubber gasket joints including nuts, bolts & washers complete all as specified.

EXTERNAL ELECRTIC SUPPLY, `LIGHTENING PROTECTION WORKS

Note:- (i) Cost of minor items such as lugs, nut bolts, washers, top insulators, sleeves, provision of extra holes in bus bar etc. shall deemed to be included. (ii) Spreader links will be provided for the MCCBs more than or equal to 100 Amp. iii) Panel drawing shall be got approved from GE before placement of order. (iv) All internal wiring shall be not less than 2.5 Sqmm PVC insulated solid conductor FRLS cable conforming to IS-694. (v) Bus bar connection for cable from main bus bar to out going MCCB shall be made through suitable rating bus bar strip duly insulated. (vi) Test certificate of panel board shall be submitted by the contractor.

LED street light luminaire with unique peanut optics to ensure uniform distribution, higher spacing between poles and maintenance free system lumen output 3600 lux LED suitable optical lens as secondary optics covered light source with glass IP-66 in-built electronic drivers 230 Volts 36 Watt cap including suitable size of bracket, 02 Nos of clamps, nuts & bolts reqd complete all as specified and directed. Make:- Philips Cat Part No.BRP409LEDCW036MRPCS1 PSU GR or equvalent in Havells/Surya

LED post top lantern copper dust painted cast aluminium spigot,spun aluminium canopy with clear acrylic cover light fitting including 25 watt LED lamp or strip and suitable dia of GI pipe for mounting the fitting, prewired complete with all accessories. Make : Pyrotech cat part No PE-13-D-L-25X00A or equivalent model in makes mentioned in Appendix 'B' .

Junction Box of size 300 x 250 x150mm with locking arrangement suitable for aluminium bus bar (04 Nos.) fixed on porecelain base insulator & 01 No MCB SP, 06A. Junction box made out of 2 mm thick MS sheet, painted with 2 coats of synthetic enamel paint over a coat of red oxide primer complete with suitable size of cable glands & MS clamps nuts, bolts & washess etc complete all as specified

Cable route indicator shown "HT UG cables" painted in brown colour and root of cable with aero made of CI in suitable eleiptical shape and fixed in MS rod 12mm dia 70 cm long ( all word embosed) and embaded in PCC block of size 30 x 30 x 60cm in ground complete all as specified

Cable route indicator shown "LT UG cables" painted in blue colour and root of cable with aero made of CI in suitable eleiptical shape and fixed in MS rod 12mm dia 70 cm long (all word embosed) and embaded in PCC block of size 30 x 30 x 60cm in ground complete all as specified and directed.

Solar light 15 watt LED including SPV panel,Lead acid battery , powder coated 5 m pole with autonomy 2 days complete all as specified and directed.

LED flood light luminaire 120 Watt with high pressure die cast housing with lends (IP-65 protected ) inbuilt electronic drivers suitable to operate on 230 Volts 50 Hz AC supply including suitable size of bracket, clamps, nuts & bolts reqd complete all as specified and directed.

SOLAR WATER HEATING SYSTEM WORKS

Supply, installation, testing and commissioning of solar water heater with heat exchanger type, conforming to IS 12933 & 13129 for cold region of 200 litre/ day capacity with electric heating backup of 3 KW and rotational moulded polyethylene water storage tank (cylindrical vertical tank with close top) of 500 Ltr capacity, triple layer as make up water tank including 20mm dia brass float valve, SS Puff insulated hot water collecting tank of suiatable capacity, hoisted and fixed in position on suitable steel staging as directed by GE complete all as specified and as directed. Note:- (i) The system shall be tested on completion to ensure that 200 litres of water at 60 Degree centigrade is available in hot water tank on normal day in cold season. (ii) All other pipe/civil work, electrical work, providing electric connection with wire, MCB, conduit etc as per manufacturer's instruction all as required shall deemed to be included in unit rate quoted. (iii) Normal water pipes and accessories from and including cold water make up tank upto & including hot water SS tank, all other pipe/civil work, electrical work, providing electric connection with wire, MCB, conduit etc as per manufacturer's instruction all as required shall deemed to be included in quoted unit rate.

Supply, installation, testing and commissioning of solar water heater with heat exchanger type, conforming to IS 12933 & 13129 for cold region of 300 litre/ day capacity with electric heating backup of 4 KW and rotational moulded polyethylene water storage tank (cylindrical vertical tank with close top) of 500 Ltr capacity, triple layer as make up water tank including 20mm dia brass float valve, SS Puff insulated hot water collecting tank of suiatable capacity, hoisted and fixed in position on suitable steel staging as directed by GE complete all as specified and as directed. Note:- (i) The system shall be tested on completion to ensure that 200 litres of water at 60 Degree centigrade is available in hot water tank on normal day in cold season. (ii) All other pipe/civil work, electrical work, providing electric connection with wire, MCB, conduit etc as per manufacturer's instruction all as required shall deemed to be included in unit rate quoted. (iii) Normal water pipes and accessories from and including cold water make up tank upto & including hot water SS tank, all other pipe/civil work, electrical work, providing electric connection with wire, MCB, conduit etc as per manufacturer's instruction all as required shall deemed to be included in quoted unit rate.

SECURITY WALL & SECURITY FENCING WORKS

Preparing newly plastered surface of wall and applying two coats of exterior emulsion paint over a coat of primer and putty on columns/ beams of approved shade / tint complete all as specified and directed.

Concertina coil punched type of 600mm coil dia including provision of mild steel (annealed) binding wire complete all as specified and directed. NOTE :- Rate also includes for necessary scaffolding for fixing of concertina coil at 2.0m to 4.0m height of security wall.

PLAYGROUND

Polycarbonate board of size 1800 x1100 x 25mm thick of make:- Nalco or as approved by GE, fixed in angle iron frame of 25 x 25 x 3mm thick, basket ring of 45cm dia made of 12mm dia plain mild sheet round bar and synthetic net complete and fixed to post with standard nuts and bolts complete all as specified and directed. Note: Mild steel work will be measured and paid for seperately under respective item of Schedule 'A' Section XII

Komal Buildcon Pvt. Ltd.

DES RAJ AND SONS BUILDERS PVT LTD

M/s Jatindra Construction Company

M/s Madan Lal Bansal and Co. Contractors Pvt. Ltd.

Beant Construction Co Pvt Ltd

Ktech Engineer Builders Co. Pvt. Ltd

J.D.Builders