Production Unit, Udaipur i.e. Renovation of Nursery Tank No.2, 3 and 4 and Brood TankNo.1 and 2 at Dhanisagar Production Unit.

Bailing out of water from the water body by using pump/manual labour etc. as per direction of the Engg.-in-charge

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. -All kinds of soil

Turfing with sods Furnishing and laying of the live sods of perennial turf forming grass on embankment slope, verges or other locations shown on the drawing or as directed by the Engineer including preparation of ground, fetching of sods and watering as per MoRD Technical specification Clause 309

Supplying bamboo (1st class) 85 mm to 100 mm dia and making shoe with end tappered upto 300 mm from the bottom of the bamboo as per drawing and specification.

Supplying ballies 100 mm dia well dressed and making shoe with end tappered upto 300 mm from the bottom including marking length and part of a metre as per drawing and specification

Handling and driving bamboo (1st class) 85 mm to 100 mm dia upto the length required by heavy hammer as per drawing and specification

Handling and driving ballies of 100 mm dia upto the length required by heavy hammer as per drawing and specification

Providing and fitting, fixing bamboo (1st class) 85 mm to 100 mm dia for horizontal, diagonal bracing, strut etc. with nails / spikes and binding wire (GI 2.00 mm) as per drawing and specification

Providing and fixing bitumen or tar drum guard posts including two coats of white synthetic enamel paint over a primer coat in the exposed outside surface above Ground level and applying two coats of coal tar on the outside surface below ground level including bottom before placing the same for a depth of 450 mm below ground level filled with earth as per specification