Providing and fixing of water fountain with multicolour waterproof lighting system in front of Main Gate No 01 of Khasiamangal Campus under SHQ BSF Teliamura

Providing, fixing, testing and commissioning of 1" dia Foam Jet Nozzle made of SS-304/SS-316 stainless steel for decorative water fountain, complete with foam producing arrangement, threaded inlet connection, diffuser, fittings, supports and all accessories. The nozzle shall produce uniform foamy water effect and shall be suitable for continuous outdoor operation. The work includes installation, alignment, testing and commissioning complete as per manufacturer specification and direction of Engineer-in-Charge.

Providing, fixing, testing and commissioning of SS Underwater Fountain Light, 12V/18 Watt, multi-colour changing type, suitable for decorative water fountain application, made of SS-304/SS-316 stainless steel housing with toughened glass front, IP-68 protection, energy efficient LED fittings, complete with mounting arrangement, cable, driver/transformer, connectors and all accessories. The work includes installation, testing and commissioning complete as per manufacturer specification and direction of Engineer-in-Charge.

Providing, fixing, testing and commissioning of 10 Amp SMPS (Switched Mode Power Supply) suitable for underwater fountain lighting system, with input voltage 220–240V AC and output 12V DC regulated supply, complete with short circuit, overload and over voltage protection in powder coated metal enclosure, including terminals, wiring connections and all accessories required for proper operation. The work includes installation, testing and commissioning complete as per manufacturer specification and direction of Engineer-in-Charge.

Providing, fixing, testing and commissioning of RGB Controller suitable for multi-colour changing underwater fountain lights, compatible with DMX/RGB lighting system, complete with control unit, remote/manual operation, synchronization arrangement, input-output terminals, wiring connections and all accessories required for smooth operation. The work includes installation, testing and commissioning complete as per manufacturer specification and direction of Engineer-in-Charge.

Providing, installing, testing and commissioning of 0.5 HP Open Well Pump Set suitable for water supply application, having discharge 145–55 LPM at operating head range 8–18 m, driven by 220 V, single phase, 50 Hz AC induction motor, complete with cast iron pump body, stainless steel shaft, impeller, foundation bolts, necessary fittings, electrical connections, earthing and all accessories required for satisfactory operation, conforming to relevant IS specifications, complete as required and as directed by the Engineer-in-Charge.