Provn of certain REVENUE WORKS, Provn of Toilet 01x Toilet near T-40 and false ceiling in Bldg No. T-40 (Rest Room) at 48(I) Sup PI ASC, provn of toilet block near Bldg No. T-23 (Isolation ward) Consiting of WC, WHB with electrical fittings at MH, Pr

Amount

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil, complete all as specified and as directed. (9+9+9)

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m depth for foundation, manholes,etc and getting out, and getting out in soft/loose soil, complete all as directed. (20+8.6+8.6)

Returning, filling in trenches including spreading, levelling watering and well ramming in layers n.exc 25 cm thick, complete all as specified and as directed. (15+6+6)

Removing excavated materials exc 250 m and n.exc 500 m and depositing, where directed at a level n.exc 1.5 m above the starting point, complete all as specified and as directed. (5+2.6+2.6)

M & L for PCC (1:4:8) type D2 40mm graded stone aggregate as in foundation, sub base, filling and mass concrete etc., Complete all as specified. (0.90+0.90+0.90)

M & L for brick work with sub class 'B' bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 Kg/Sqcm) old size bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:6), complete all as specified and as directed.(7+10.70+10.20)

Cutting out bricks,forming toothing for, and bonding new into old work in cement mortar including value of new materials entering old walls and jointing and pointing (measured on vertical face in contact with old wall only), complete all as specified and as directed.

M & L for Damp proof course to horizontal or vertical surfaces including necessary formwork in PCC (1:2:4) type B-0, 50mm thick mixed with WPC @ 3% by weight of cement, complete all as specified and as directed. (Note: WPC shall be measured and paid separately) (1.1+2.3+2.3)

M & L for RCC(1:1.5:3) type A-1 using 20mm graded stone aggregate as in, lintel beam, roof beam, cantilever, bressumers etc., supported on walls, beams, columns and the like, complete all as specified and as directed. (0.2+0.10+0.10)

M & L for RCC(1:1.5:3) type A-1 using 20mm graded stone aggregate as in slab supported on walls beams and columns, floor, roofs, landings, balconies, canopies, deck slabs and shelves, etc., complete all as specified and as directed. (0.7+1.15+1.15)

M & L for RCC(1:1.5:3) type A-1 using 20mm graded stone aggregate as in Chajja supported on walls beams and columns, floor, roofs, landings, balconies, canopies, deck slabs and shelves, etc., complete all as specified and as directed. (0.10+0.10)

M & L for formwork to soffit of suspended slab (flat) such as roof slab, floor slabs n.exc 200mm thick (horizontal or sloping), complete all as specified and as directed. (4.4+6.9+6.9)

M & L for formwork to concrete flats, breaks in floor, openings in concrete walls, floor and roofs an sides of RCC/PCC bands in wall, horizontal or sloping, and similar work all exceeding 20cm wide, complete all as specified and as directed. (0.23+0.23+0.23)

M & L for formwork to edges of concrete flats, treads, breaks in floors, widow cills, concrete railings, opening in concrete walls, floor and roofs etc, exc 10cm but n.exc 20 cm, and sides of RCC/PCC bands in walls, horizontal or sloping and simimilar works, complete all as specified and as directed. (19+15+15)

M & L for formwork to chullah hoods, chajjas, troughs and similar items including edges, complete all as specified and as directed. (0.5+0.91+0.91)

S & F mild steel TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping, hooking ends and binding with mild steel wire (annealed) not less than 0.90 mm dia or securing with clips, complete all as specified and directed. (75+90+85)

S & F mild steel TMT bars 8mm dia and over cut to length, bent to shape required including cranking bending with MS wire (annealed) not less than 0.90mm dia or securing with clips as in stirrups, complete all as specified. (15+20+15)

M & L 10mm thick cement plastering in cement mortar (1:3) on fair faces of concrete surfaces finished even and smooth using extra cement neeru finished to plastering, complete all as specified and as directed. (6+9.5+9.5)

M & L for rendering 15mm thick brickwork or concrete in cement mortar (1:4) finished even and smooth without using extra cement, complete all as specified and as directed. (23+35+35+10)

M & L for plastering10mm thick on fair faces of brickwork or concrete in cement mortar (1:6) finished even and smooth without using extra cement, complete all as specified and as directed. (10.5+15.80+15.80)

M & L for rendering in cement mortar (1:3) on fair faces of cement concrete surfaces, ceiling, chajjas etc., of thickness 5mm finished the surface even and smooth without using extra cement, complete all as specified and as directed. (4.5+8+8)

M & L for preparation of newly plastered surfaces using sand paper and applying two coats of cement base paint over a coat of cement base primer, complete all as specified and as directed. (23+35+35)

M & L preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed. (10.5+15.80+15.80)

M & L preparation of new plastered surfaces of ceiling, chajja, fascia and applying three coats of white wash complete all as specified and directed. (4.5+8+8)

M & L for 100 mm thick D2(1:4:8) 40mm graded aggregate as in sub base floor, complete all as specified and as directed. (2.1+5.20+5.2)

M & L for 75 mm thick plain cement concrete (1:3:6) mix, type C-1 using 20mm graded stone aggregate as in plinth protection, finishing the surfaces even and fair without using extra cement, including 10 mm wide groove not exc. 3.00 m in length and filled with bitumastic, complete all as specified and directed. (5.5+10+10)

Hardcore of broken bricks of gauge n exc 63mm, deposited, spread and levelled in layers not exc, 15cm thick, watered and rammed to a true surface, complete all as specified and as directed. (1+1.74+1.74)

M & L for 25 mm thick B1(1:2:4) using 20mm graded aggregate as in sub base floor, finishing even and smooth without using extra cement, complete all as specified and as directed. (2.1+6.10+6.1)

M & L for 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed. (2.5+6.10+6.1)

M & L for 10mm bedding layer in cement mortar (1:4) , complete all as specified and directed. (10+15+15)

M & L for non skid ceramic paver tiles of size 300x300x10 mm thick, coloured as in path etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed. (2.5+6.10+6.10)

M & L for glazed ceramic coloured tiles 300x200X 5-6 mm thick as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile, complete all as specified and directed. (10+15+15)

Taking down chowkhats with shutter or frames of any description n.exc 1.5 Sqm each (without taking of shutter from the frame), complete all as specified and directed by Engr-In-Charge .

Taking down chowkhats with shutter or frames of any description exc 1.5 Sqm and n.exc 4 Sqm each (without taking of shutter from the frame), complete all as specified and directed by Engr-In-Charge .

Demolition of brick work built in cement mortar including all quoins, arches, pillar etc., complete all as specified and directed

M & L for solid PVC door frame of size 50mm x 47 mm made out of 5m plain colour PVC sheet reinforced with MS square tube, fixing in opening, complete all as specified and as directed. (4.75+14.25+14.25)

M&L for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. Mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rain on either side and as gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement fixing with the frame at site as per manufacturerer's instructions, complete all as specified and directed. (1.35+3.90+4.2)

S & F steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and as directed. (0.27+0.40)

S & F framed work such as grill, grating, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; conforming to Fe-410-0 or Fe 310-0, complete all as specified and directed by Engr-In-Charge. (3+5)

M & L for 3mm thick figured glass quality and glazing with oil putty n.exc 0.50 Sqm in each pane complete all as spd and directed by Engr-In-Charge . (0.20+0.40)

S & F Aluminium anodised door stopper with rubber shoes of size min 50mm long, complete all as specified and as directed. (1+1+1)

S & F Aluminium, anodised barrel tower bolts 200mm of extruded section, complete all as specified and as directed. (2+6+6)

S & F mild steel butt hinges 100 mm medium weight cooled roll, complete all as specified and as directed. (3+9+9)

S & F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips to sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed. (1+1+1)

S & F 150mm long, aluminium handles cast type, complete all as specified and as directed. (2+6+6)

M & L for PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in holdfast , complete all as specified and directed. (0.06+0.06+0.05)

S & F rotational moulded polythene water storage tanks, double layered (cylindrical vertical with closed top) of capacity 500 lit, hoisted and fixed in position , complete all as specified and asd directed. (1+1+1)

S & F PVC ball valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to dia of pipe 20mm, complete all as specified and asd directed. (1+1+1)

M & L for plain cement concrete 1:3:6 type C-2, using 40 mm graded stone aggregate as in base of PVC water tank including necessary formwork, complete all as specified and directed. (0.10+0.14+0.14)

S & F for GI tubing medium grade including all types of fittings of ISI marked fixed to walls and ceiling or laid in floor suitable for 15 mm bore, complete all as specified and as directed. (6+6+6)

S & F for GI tubing medium grade including all types of fittings of ISI marked fixed to walls and ceiling or laid in floor suitable for 20 mm bore, complete all as specified and as directed. (25+6+6)

S & F stop valve, cast copper alloy screwed down high pressure with crutch fly handle screwed both ends for iron pipe of bore 20mm fixed, etc., complete all as specified and as directed. (1+1+1)

S & F stop cock fancy type, brass chromium plated with long shank (concealed type) with CP wall cap 15mm bore, complete all as specified and as directed. (2+3+3)

S & F bib tap, cast copper alloy chromium plated (CP) with capstan head handle screwed down screwed for iron pipe and fixed to 15mm bore pipe, complete all as specified and as directed.

S & F vitreous China urinal, half stall type (back to corner wall type) including providing and fixing plug, bedding urinal against wall in cement mortar (1:2) securing urinal to plug with and including 60 mm brass long screw, pointing around urinal back in cement mortar, flush pipe, waste pipe, waste fittings, grating and union for discharge, complete all as specified and as directed. (1+1+1)

S & F vitreous China wash basin, white, flat back, size 550X400mm including cast iron brackets for fixing, 32mm waste coupling, 32mm waste pipe etc,. including PCC 1:2:4 type B1 using graded stone aggregate for embedding brackets and making disturbed surfaces in cement mortar (1:3), complete all as specified and directed.Make:- Hindware/Parryware/Cera or of equivalent approved make. (1+1+1)

S & F pillar tap fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe of dia 15mm and fixed, complete all as specified and as directed. (1+1+1)

S & F flushing cistern low level, PVC 10 lit capacity syphon action type, valveless with inlet ball valve, float valve, handle including bracket and 32mm flush pipe, and making good disturbed surfaces in cement mortar (1:3), complete all as specified and as directed. (1+1+1)

M & L for vitreous china wash down water closet, pedestal pattern Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc.and including seat and cover for pedestal pan, complete all as specified and directed. (1+1+1)

S & F brass chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges, complete all as specified and as directed. (1+1+1)

M & L PVC (SWR) pipes 110 mm bore, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. (2.5+3.5+3.5)

M & L PVC (SWR) pipes 110 mm bore, single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed. (5+1.5+1.5)

M & L PVC (SWR) pipes 75 mm bore, single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed. (3+2.5+2.5)

M & L PVC (SWR) pipes 75 mm bore, single socketed in any length with rubber ring joints laid in trenches or in floor, complete all as specified and directed. (2+2.5+2.5)

S & F (SWR) 110 mm dia bends any radius with rubber ring joints, complete all as specified and directed. (2+2+2)

S & F (SWR) 75 mm dia bends any radius with rubber ring joints, complete all as specified and directed. (2+2+2)

S & F (SWR) 110 mm bore junction, (double Tee) equal or unequal, complete all as specified and directed. (1+1+1)

S & F (SWR) 75 mm bore junction, (double Tee) equal or unequal, complete all as specified and directed. (1+1+1)

S & F (SWR) 110mm bore branch piece, double (double Y), equal or unequal, complete all as specified and directed. (1+1)

S & F (SWR) 75mm bore branch piece, double (double Y), equal or unequal, complete all as specified and directed.(1+1)

S & F (SWR) 110mm vent cowl, complete all as specified and directed. (1+1+1)

S & F (SWR) 75 mm vent cowl, complete all as specified and directed.(1+1+1)

Cutting into existing manholes for connecting new drains, making good to pipe and rendering , cutting out existing benching for and forming branch channel (1/2 round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150mm dia pipe, complete all as specified and as directed. (1+1+1)

M & L PVC (SWR) pipes 150 mm bore, single socketed in any length with rubber ring joints laid in trenches or floors, complete all as specified and directed. (30+5)

M & L for concrete bed to drain pipes including packing under, and hunching against the sides of pipes after they are laid and tested in cement mortar 1:3:6 type C-2, using 40 mm graded stone aggregate for 150mm pipe, complete all as specified and directed. (30+5)

M & L for Salt glazed stone ware (SGSW) gully traps, square or round mouthed type P 150mm x 150 mm , complete all as specified and directed. (1+1)

S & F anodised GI snap grid frame work of grid size 605x605 mm for false ceiling, complete all as specified and as directed.

M & L for asbestos fibre cement building board 4mm thick in ceiling fixed or laid/inserted to timber GI/Aluminium frame work with screw, complete all as specified and as directed.

S & F hanger of 6mm dia G.I (up to 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flats 40x3mm size 60mm long and expansio hold fasteners 12.5 dia 40 mm long, complete all as specified and as directed.

M & L for brick work with sub class 'B' bricks in one brick thick wall straight or curved on plan to any radius built in cement mortar 1:4, complete all as specified and directed. (7+7)

S & F brass chromium shower rose 50mm size with swivel joint any size, complete all as specified and as directed. (1+1)

M & L for providing precast cement concrete type B0 (1:2:4) using 12.5mm graded stone aggregate (RCC jali) in louvers and jallies, 40mm thick (measured solid), including all mouldings but excluding frame set in cement mortar (1:4), complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish of the premises complete all as specified and directed.

M & L for 20mm thick screed bed in cement mortar 1:4, complete all as specified and directed.

M & L for vitrified ceramic tiles 10mm thick (Square/rectangular) polished, area of each tiles exceeding 0.42 Sqm but n.exc 1.00 Sqm, as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed.

M & L for vitrified ceramic tiles 10mm thick (Square/rectangular) polished, area of each tiles exceeding 0.42 Sqm but n.exc 1.00 Sqm, as in vertical surface, dado, skirting etc., set and jointed in neat cement and pointed in white or coloured cement to match, complete all as specified and as directed.

M & L for rendering 10mm thick on fair faces of brick work in cement mortar (1:4) finished even and fair, complete all as specified and as directed.

S&F Anodised aluminium frame for doors, windows, ventilators for two/three track channel including joining cleat,rubber packing etc, complete all as specified by Engr-in-Charge.

M & L 12 mm thick prelaminated particle board exterior grade prelaminated both side with decorative choice lamination fixed in aluminium shutter/partition, complete all as specified and directed by Engr-In-Charge .

M & L for 5.5 mm thick plain sheet glass quality exc 0.50 Sqm in each pane, complete all as specified and directed by Engr-In-Charge .

M & L for 5.5 mm thick plain sheet glass quality n.exc 0.50 Sqm in each pane complete all as specified and directed by Engr-In-Charge .

Taking down cement plaster of any description and in any position including raking out joints, hacking for key scrubbing down with water etc and removing of debris from site, complete all as directed.

M & L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of chalk whitening on plastered surfaces, complete all as specified and as directed.

M & L for preparation of old plastered surfaces of walls using sand paper and applying two coats of distemper oil emulsion on plastered surfaces, complete all as specified and as directed.

M & L for point wiring for one light/ fan point/call bell controlled by one switch with 1100 volt grade PVC insulated FRLS 1.5 Sq mm multi stranded copper conductor cable with continuous earth wire of 1.5 Sq mm multi stranded copper conductor cable PVC insulated-unsheathed, drawn in & including concealed rigid non metallic PVC conduit medium grade with fittings (ISI marked) not less than 20 mm dia & sunken anodized pressed sunken boxes made out of not less than 1.0 mm thick sheet, covered with 2.8 mm thick laminated insulated cover make sheet for housing/fixing switches etc complete all as specified and directed.(4+4+8)

All as per item No. 96 here-in-before but 1.5 Sqmm for 5 Amp socket outlet on the same board with 1.5 Sq mm earth wire.(1+1+1)

All as per item No 96 here-in-before but 2.5 Sq mm for 15 Amp switch socket combination on independent board with 2.5 Sq mm earth wire complete.(1+1+1)

S & F switch piano type 5 Amp 230 volt one way flush type complete all as specified and as directed. (5+5+8)

S & F socket outlet 3/5pin 5 Amp flush type 230 volt complete all as specified.(1+1+1)

S&F switch socket combination 2 in 1, 6 pin 5 Amp and 15 Amp flush type universal 230 volt complete all as specified. (1+1+1)

S & F angle holder complete all as specified and as directed. (4+4+6)

S & F LED lamp 9 Watts, complete all as specified and as directed. (4+4+6)

Supply and fix ceiling rose three terminals PVC/ Polycarbonate, isolated body complete all as specified. (1+1+2)

S & F sheet metal enclosures for DBs single pole & neutral 4 way double door with 200 Amp rated bus bar suitable to accommodate MCB and necessary electric cable connection through suitable lugs by crimping and making good disturbed area of wall complete all as specified and as directed. (1+1+1)

S & F MCB single pole 6 to 32 Amp 240 V, ‘B’ Series, 10 KA, complete all as specified and as directed. (2+2+2)

S & F MCB SPN, 20 to 40A 240V, ‘B’ Series, 10 KA complete all as specified and as directed. (1+1+1)

M&L ,for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts check nuts & washers of galvanised iron or steel, protected by GI pipe 15 mm bore (light grade) and watering pipe 20 mm bore GI pipe (light grade) and PCC of chamber and coping shall in 1:3:6 type C-1 using 20 mm graded stone aggregate including excavation and earth work and removal of surplus soil and filling with black cotton soil upto ground level complete all as shown in electrical plate No 3 of SSR Pt-I, 2009 with CI cover 10mm thick of size 300x300mm with charcoal dust and common salt complete and earth lead connected to panel including testing complete all as specified and directed. Note : Earth test result should not less than one ohm.

Supply 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, two single core cable multi stranderd conductor 6 Sq mm including testing, complete all as specified and directed.

Supply only water proofing compound

M/S tiwari enterprises

M/s Ray construction

M/S BIJAY KUMAR SINGH