Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.6 LAccepted-AOC | ₹11.6 L | L1 | Accepted-AOC Lowest bidder |
| 2 | L2₹11.6 L+₹443.50 (0.04%)Rejected-Finance | ₹11.6 L+₹443.50 (0.04%) | L2 | Rejected-Finance Not lowest bidder |
| 3 | L3₹12.1 L+₹51,745 (4.46%)Rejected-Finance | ₹12.1 L+₹51,745 (4.46%) | L3 | Rejected-Finance Not lowest bidder |
| 4 | L4₹14.2 L+₹2.6 L (22.1%)Rejected-Finance | ₹14.2 L+₹2.6 L (22.1%) | L4 | Rejected-Finance Not lowest bidder |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
22 Dec 2022, 6:00 pmClosed
Garrison Engineer, Banar
Garrison Engineer, Banar, Jodhpur-342027
PETTY REPAIR AND DAY TO DAY MAINTENANCE TO OTM AND MD ACCN AT RALAWAS UNDER GE BANAR
2022_MES_564548_1
8822/52/E8
Open Tender
Civil Works
Item Rate
270 days
Banar
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Garrison Engineer, Banar
₹30,000
Yes
31 Jan 2023
22 Nov 2022
24 Dec 2022
22 Nov 2022
22 Dec 2022
8 Dec 2022
Amount
Taking up or down 15mm bore steel tubing & connections from wall, ceiling, floor complete all as specified.
All as per Ser item No 1.00 but 20mm bore.
S&F 15mm bore GI pipe medium grade with and including all fittings and fixed to wall & ceiling or laid in floor, complete all as specified.
All as Ser item No 2.00 above but 20mm bore.
Refixing steel tubing with and including new fittings and connection in new or old position (walls,ceiling,floor etc) bore of pipe in 20mm dia complete all as specified. Note : (i) Old serviceable water tubing retrieved from taking down here-in-before shall be used after cleaning. (ii) The quoted rate shall deemed to be included new GI fittings.
Refixing steel tubing with and including new fittings and connection in new or old position (walls,ceiling,floor etc) bore of pipe in 15mm dia complete all as specified. Note : (i) Old serviceable water tubing retrieved from taking down here-in-before shall be used after cleaning. (ii) The quoted rate shall deemed to be included new GI fittings.
S&F in repair 15mm bore bib tap cast copper alloy with aerating device operation, fancy type, chromium plated with capstan head screwed for iron pipe or for brass ferrule complete all as specified.
S&F in repair 15 mm bore pillar tap fancy type, cast copper alloy with capstan heads, with aerating device operation, chromium plated,screwe down high pressure with or without lettered 'Hot or Cold' long screwed shanks and fly nuts, screwed for iron pipe and fixed bore of pipe in 15mm dia complete all as specified.
S&F in repairs 15mm bore Stop valve/Angle valve, cast copper alloy, fancy type chromium plated, screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union complete all as specified.
S&F in repair 15mm bore stop valve (any type), cast copper alloy, fancy type chromium plated with long shank & cup (concealed type), screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union complete all as specified.
S&F in repairs 15 mm bore fancy type long body bib tap, half turn, with wall flange, with aerating device operation, cast copper alloy with capstan heads, chromium plated, screwed for iron pipe or for brass ferrule, complete all as specified & as directed.
S&F in repairs wall mixer chromium plated (3 in -1) with arrangement for both telephonic shower and overhead shower with 220 mm max long bend pipe with hand shower of size 100 x 55 mm with 130 mm long arm & 1.2 m house pipe of Cera Cat No CL-113 & CG 425 or equivalent make as per Appendix 'B' complete all as specified.
S&F in repairs PVC low level flushing cistern 10 litrs capacity (white ISI marked) with inlet ball valve, float and handle, syphonic action type including brackets and flush pipe of polythelene of low or high density of PVC 32mm dia complete all as specified.
S&F in repairs 32/38/40 mm dia PVC flexible waste pipe 80cm long with socket for union, for WHB/urinal/sink complete all as specified.
S&F in repairs waste coupling (half or full threaded) suitable for WHB/Sink/Urinal etc , bore dia of discharge pipe 32mm (Minimum weight 120 gms) complete all as specified.
Supply and fixing in repairs pipe of polyethylene of low or high density of PVC 32mm dia for low level cistern including all joints all as specified.
Supply and fixing in repairs PVC internal fittings (kit) complete set for low level flushing cistern tank to make the existing cistern functional , all as specified.
S&F in repair equilibrium float valve suitable for low level flushing cistern complete all as specified.
S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified.
S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified.
S&F in repair 32mm bore bottle trap of chromium plated for wash hand basin complete all as specified
S&F in repair vitreous china wash down water closet pan (Padestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonoage pipe etc & with plastic WC seat and cover (white) closed pattern with flat bottom and cover and suitable mild steel chromium plated or aluminised hinging device complete all as specified.
S&F in repairs Jet spray chromium plated brass for EWC with & including PVC connection 600 mm long suitable for 15 mm bore GI pipe with PTMT nut & nipple complete all as specified.
S&F in repairs health faucet chromium plated suitable for 15 mm bore pipe including 1 M long PVC tubes for EWC complete all as specified.
S&F in repairs plastic water closet seat cover white closed pattern with flat bottom and mild steel CP or aluminium hinging device complete all as specified.
S&F in repairs vitreous china wash basin white of size 550x400 mm including 32 mm CP waste coupling & PVC flexible waste pipe of min 90 cm long, flat back or angle back type excluding taps, waste chain & plug but incuding cast iron brackets and cutting for and pinning in ends of brackets or erecting stand complete all as specified.
S & F in repair vitreous china wash basin with pedestal , white, flat back, size 550 x 400 mm including one no 15mm bore fancy type mixer taps with hot & cold, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered HOT or COLD with long screwed shanks and fly nuts, screwed for iron pipe, one No PVC waste pipe 15 mm dia and 60 cm long with 32 mm dia connector, 32mm size waste fittings, brass chromium plated with long screwed shanks and fly nuts, flange end, bedded in red lead cement and other fixed and PVC connection 15 mm dia & 600mm long with two Nos check nut and washer complete including cutting for and pinning in ends of bracket or erecting stand complete all as specified.
S&F in repairs vitreous china wash down water closet (Pedestal pattern EWC), coloured, floor mounted coupled closet, including connection to drain (or outgoing pipe), anti-sypohonage pipe etc, with & including WC seat cover coloured closed pattern with flat bottom and cover, vitreous china symphonic action type twin flush flushing cistern of 10 litre capacity with lid, necessary fittings complete all as specified.
S & F in repair ,vitreous china squatting pan (Orissa pattern) of size 580x 440 mm white with integral foot rest,incl 'P' or 'S' trap & front or back inlet complete all as specified.
S&F in repairs vitreous china counter top basin size 450 x 525 x 195 mm shape ovel of Jaquar Cat No CNS-WHT-601 or equivalent of make as specified in Appendix 'B' including 32 mm CP waste coupling & PVC flexible waste pipe of 90 cm long complete all as specified.
S&F in repair CP brass nipple/Leg Left/Right/spidle/phase for connection of wall mixture with GI Pipe including CP nuts all as specified.
Supply and fix in repairs of spindles, phases of brass of any size required for bib taps, pillar cocks, stop cocks, angle valves, concealed valves,CP operating Knob / Cap matching with existing all as directed complete all as specified.
S&F in repairs 15mm bore, GI socket, Hex Nipple, GI Nipple 75mm, Nipple 100mm, NIPPLE, 150MM, Tee, GI Tee,GI Elbow, GI reducer(15mmx20mm), (GI reducer (15mmx25mm)
S&F in repairs 15mm bore, GI Union, GI Tank Nipple complete all as specified.
S&F in repairs 20mm bore, GI Socket, Hex Nipple, GI Nipple75mm,Nipple 100mm, Nipple 150mm, GI Tee, GI Elbow, GI reducer (15mmx20mm), GI reducer (15mmx25mm) complete all as specified.
S&F in repairs 20mm bore GI Union, GI Tank Nipple complete all as specified.
M&L for repairs to existing 15mm bore bib tap/stop cock etc cast copper alloy by replacing brass jumper assembly of bib tap matching with existing and fixed in old/new location all as directed
Checking and attending to complaints of water leakage from bib taps,stop cock ,pillar taps, flushing cisterns, wash hand basins, urinal, wall mixer/basin mixer ,angle valve ,concealed valve,shower rose , health faucet & jet , float valve , of any type & size or any other water supply fittings/fixtures incorporated in plumbing works not mentioned here in before used any where in the bldgs which is causing obstruction to water supply in area,& requires plumbing including carrying out minor repairs such as replacement of washers, check nuts, tightening of fittings of flushing cistern or any other repair not mentioned herein before etc using petty materials like washers, thread(soot),Teflon tape,M-Seal, screws(any size), nails(any size) or any other material not mentioned here in before to make water supply/plumbing lines & fiittings/fixtures functional and leak proof to the satisfaction of the occupants/users under the jurisdiction of AGE B/R Note: (i) The rate of above mentioned item incorporates use of any materials & equipment used for completing the complaints on time to the satisfaction users/occupants (ii) Contractor or his authorised representative shall collect such type of complaints mentioned here in above from B/R-P complaint cell at 8.30 AM on daily basis except Sunday & Holiday & submit the completion of complaints on the next day duly signed by the users/occupants. No extra payment shall be made on account of collection of complaint and submission of complaints . (iii) Complaints must be completed with in 24 hrs without any fail otherwise recovery shall be made at Rs 50.00 per complaint per day from the contractor. (iv) Any items required to be replaced shall be paid under respective items and in that case this items shall not be measured and paid.That complaint should also be completed within 24 Hrs without fail.
M & L for 75mm thick PCC 1:3:6 , type C-1 using 20 mm graded stone aggregate as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 2 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed.
M&L for brick work with fly ash bricks, straight or curved on plan to any radius, built in cm 1:4 as in half brick thick wall omplete all as specified including demolition of existing.
M&L for brick work with fly ash bricks, straight or curved on plan exc 6m radius, built in CM in 1:6 complete all as specified including demolition of existing.
M&L 15mm thick cement plaster in CM 1:4 on external surface in with WPC 3% by weight of cement including finishing fair & even all as specified & directed.
Supply only integral water profing compound as per IS-2645 complete all as specified.
M&L for 15mm thick cement plaster in CM 1:6 on other than fair faces of brick work or stone surfaces of walls complete all as specified.
M&L for rendering 5 mm thick in CM (1:3) as in ceiling and finish the surface even and smooth without using extra cement.
M&L for glazed ceramic tiles (coloured) of size 300mmx200mx6 to 7mm thick on vertical surfaces of wall set and jointed in neat cement slurry and pointed in coloured cement to match with the shade of tiles over and including 10 mm thick screed /rendering in CM 1:4 complete all as specified.
M&L glazed ceramic tiles in vertical surface 300x450x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles over and including 10 mm thick screed /rendering in CM 1:4 complete all as specified.
M&L for non skid ceramic tiles (coloured) 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including screed bed or bedding layer 15mm thick in CM 1:6 for laying floor finishes Complete all as specified.
Dismantling of water tanks of capacity exc 250 but n exc 500 ltrs & removing to stores complete all as specified.
Dismantling of water tanks of capacity exc 500 but n exc 1000 ltrs & removing to stores complete all as specified.
Supply and fixing 500 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top), hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc.complete as specified in SSR Part-I
Supply and fixing 1000 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I
Supply and fixing in repairs Ball valves, high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball, screwed for iron pipe 20mm dia (minimum weight 210 gms) complete all as specified and as directed.
S&F PVC 32 mm dia pipe 500 mm long as in spout pipe from sunken floor to external surfaces including cutting brick wall/RCC/ PCC and making good in CM 1:3 pipe all as specified.
M&L for preparing newly plastered surfaces & applying three coat of white wash on ceiling complete all as specified.
M&L for preparation of old surrfaces of wall and applying two coats of white wash on ceiling complete all as specified.
M&L for preparation of newly plastered surface of wall & applying two coats of cement base paint over a coat of primer complete as specified.
M&L for preparation of previously treated surfaces/old surface of wall and applying one coat cement base paint on old surface of wall.
Demolition of existing lime concrete/PCC padding, roof treatment of any thickness laid over RCC roof/Chajjas etc removing complete layer of bitumen under cocnrete/PCC padding, cleaning and washing of roof with water to remove dust etc as preparation to receive treatment all as directed and specified.
Providing cement concrete type B-0, 1:2:4 (using 12.50 graded stone aggregate) as in padding and levelling course on roof and floor complete all as specified.
M&L for 15mm thick plaster in CM 1:4 mixed with water proofing compound 3% by wt of cement on top of Chajjas /roof and other RCC surfaces to be finished even and smooth without using extra cement complete all as specified. Note:- WPC measured and paid for separately.
S&F in repair UPVC (SWR) ISI Marked pipes single socketed in any length with rubber ring joints laid in trenches or in floors of 75mm pipe complete all as specified.
S&F in repair UPVC (SWR) ISI Marked pipes single socketed in any length with rubber ring joints laid in trenches or in floors of 110 mm pipe complete all as specified.
S&F in repair UPVC (SWR) pipes of 75 mm bore single socketed in any length fixed to wall complete all as specified.
S&F in repair UPVC (SWR) pipes of 110 mm bore single socketed in any length fixed to wall complete all as specified.
S&F in repair UPVC (SWR) floor trap, plain with grating including joining with solvent cement 75 mm dia complete all as specified.
S&F in repair UPVC (SWR) bend 75mm bore of any radius complete all as specified.
S&F in repair UPVC (SWR) bend 75mm bore of any radius with access door complete all as specified.
S&F in repair UPVC (SWR) bend 110 mm bore of any radius complete all as specified.
S&F in repair UPVC (SWR) bend 110 mm bore of any radius with access door complete all as specified.
S&Fin repair UPVC (SWR) PVC (SWR) 75 mm branch piece, single (single Y) equal or unequal with access door complete all as specified.
S&F in repair UPVC (SWR) branch piece single PVC (SWR) (Single T) equal or unequal of 110 mm bore with access door complete all as specified.
S&F in repair UPVC (SWR) branch piece single PVC (SWR) (Double T) equal or unequal of 110 mm bore with access door complete all as specified.
S&F in repairUPVC (SWR) branch piece single PVC (SWR) (Single T) equal or unequal of 75 mm bore with access door complete all as specified.
S&F in repair UPVC (SWR) branch piece single PVC (SWR) (Double T) equal or unequal of 75 mm bore with access door complete all as specified.
S&F in repair UPVC (SWR) vent cowl 110 mm complete all as specified.
Siddhi Vinayak and Co
M/S Dharam Chand Lal Chand Jain
M.A. MUNSHI AND CO.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .