TOKEN NO. GE/K-25/2024-25 - SPL REPAIR TO BLDG NO. T-04, T-76 AND T-03 OF KBS AND BLDG NO. T-23 OF 308 FD HOSP AT DRAS UNDER GE KARGIL (2ND CALL)

Amount

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as directed.

Dismantling of timber scantling fillets, rails, posts rafters, purlins etc under 40 Sqcm, in any position as in unframed work, complete all as specified and directed by Engr-in-Charge.

S & F second clas soft wood fillets square or rectangular in section sectional area exceeding 13 sq cm and n exc 25 sq cm as in scantling secured with nails or brads complete all as specified and directed.

S & F 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work in walls complete all as specified and directed.

S & F 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work in ceiling or sloping portion complete all as specified and directed.

S&F second class softwood moulding as in cornices, picture rails and the like sectional area exceeding 3 Sqcm and n.exc 6 sqcm fixed with nails complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and directed.

S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified

S & F 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap bent to curve, with grade of zinc coating 275 fixed with L-type or J-type or cranked hook bolts in roof, wall etc complete all as specified and directed.

S&F for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L for 1.25 mm thick Plain, black, mild steel sheeting,in chajjas and straight flashings complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position complete.

M&L for Second class hard-wood clean swan timber fixed in scantlings complete.

M&L for preparing previously untreated steel surfaces of any description over 10cm width/girth and applying two coats of synthetic enamel paint over one coat of redoxide primer including preparation of surface.

M&L for preparing old wooden surfaces of any description over 10cm width/girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparing old steel surfaces of any description over 10cm width/girth and applying two coats of synthetic enamel paint complete all as specified and directed.

Demolition of concrete of any description and in any position and removal of rocks/debris to a distance not exc 50 mtrs and depositing where directed at a level n exc. 1.5 m above the starting point.

M & L for 75 mm thick plain cement concrete 1:3:6. type C-2 (using 40mm graded aggregate) as in plinth protection and subbase to floors complete all as specified and directed.

M & L for 25 mm thick plain cement concrete 1:2:4. type B-0 (using 12.5 mm graded aggregate) as subbase to floor tiles complete all as specified and directed.

Dismantling of floor hearth and wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises., complete all as specified and directed by Engr-in-Charge.

M & L for Joint free Non-skid coloured ceramic tiles, 7 to 8mm thick, area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 15 mm thick screed bed in CM 1:4, complete all as specified.

M&L Joint free Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.18 and n.exc 0.38 Sqm in floors over 15mm thick screed bed in cement mortar 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tile all as specified and as directed

M & L for Coloured Glazed ceramic tiles of size 300x450x7 mm thick in vertical surface set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles laid over and including 10 mm thick rendering in CM (1:3), complete all as specified and directed

M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment over 25mm thick sand cushion complete all as specified and directed. (Note- Sand cushion shall be measured and paid separately)

M&L for Sand filling under floors or in foundation including watering and consolidation all as specified and as directed

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete incl 20mm thick screed bed in CM 1:6 complete all as specified and directed .

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete incl 15mm thick rendering in CM 1:6 complete all as specified and directed

M & L for coloured chequered cement concrete tiles 300x300x 25mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors including 20 thick screed bed in CM ( 1:4) complete all as specified & directed.

M&L PCC type C1 1:2:4 (20mm graded aggregate) as in coping, complete all as specified and as directed by Engr-in-Charge.

Supply & Fixing in repair 10 ltr PVC valveless,syphonic action type, flushing cistern , low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

Supply & fixing in repair 20 mm Stop valve/angle cock, fancy type, chromium plated with long shunk and cup (concealed type) high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed.

Supply & fixing in repair 20 mm Cast copper alloy, Chromium Plated Bib tap fancy type with crutch or butterfly handle, screwed for iron pipe or for brass pipe of for ferrule and fixed.

Supply & fixing in repair 450 mm long PVC connection 15mm bore with PTMT nuts complete all as specified and directed.

Supply & fixing in repair Vitreous china squatting pan, Orissa Pattern size 580mm x 440 white incl connection to P or S trap with integral foot rest but excluding flushing cistern and flush pipe including placing in position complete all as specified.

Supply & fixing in repair Vitreous china wash hand basin size 580mm x 440 white incl bracket ,waste pipe and coupling placing in position complete all as specified.

Supply & fixing in repair 20 mm bore Pillar taps cast copper alloy, with capstain head, fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and flynuts, screwed for iron pipe and fixed.

Taking up or down steel water tubing/PPR of 20 mm dia bore all as specified and as directed.

Taking up or down steel water tubing/PPR of 25 mm dia bore all as specified and as directed.

M&L for 20 mm 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc.

M&L for 25 mm 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc.

S&F in repair brass chromium plated tubular towel rail 20 mm dia D type, 60 cm long between flanges complete all as specified and as directed.

S&F in repair soap dish brass chromium plated fixed to wall with brass chromium plated screw complete all as specified and as directed.

S& F in repairs rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (1000 ltr capacity) and providing all necessary fittings for connecting with pipe line, including lid cover.

Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each as doors, windows & ventilators etc. and removal from site all as specified and directed.

Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (W/out taking off shutters from the frames).

M & L for second class softwood (KAIL), plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed by Engr-in-Charge.

S & F 35mm thick second class softwood (KAIL) Plain, framed, panelled shutters (two panels), with panels of timber flat on both sides (feather edged), or of 12mm thick veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkats complete all as specified and directed by Engr-in-Charge.

S & F second class softwood (KAIL) 30 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified.

M&L for preparing previously untreated wood and wood based material of any description over 10cm width/girth and applying two coats of synthetic enamel paint over one coat of pink primer including preparation of surface.

Hacking out old broken glass (any thickness,size,quality or description) from wooden frames metal frames or stone,concrete or brick surrounds,glazed with putty or fixed with beads complete all as specified and directed.

S & F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc 0.5 Sqm in each pane complete all as specified and directed.

S & F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks, or galvanised wire staples including etc complete all as specified.

S&F anodised aluminium barrel tower bolt extruded sections 100 mm size complete all as specified and directed.

S&F 75 mm butt hinges medium weight cold rolled mild steel fixed with screws or welded complete all as specified and directed.

S&F mild steel 100 mm long Butt hinges medium weight,cold rolled all as specified with galvanised mild steel screws complete.

S&F Aliminium anodised barrel tower bolts, 150 mm long complete.

S&F Aluminium anodised handles, cast type anodised 125 mm long complete.

S&F 300 mm long Aliminium anodised sliding door bolts with hasp, staple (bolt type) ISI market stove and fixed complete all as specified and directed.

S&F kitchen sink with drainage board made out of 1mm thick stainless steel with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever bracket and connecting union to pipe over all size 915 mm X 460 mm & bowl size 410 mm X 330 mm X 160 mm including sink coupling and waste complete all as specified and as directed.

Demolition of precast concrete articles and precast concrete block walling including all quoins, arches, pillars, etc built in cement mortar of any description not other specifically provided for etc complete all as specified.

M&L for Precast cement concrete type C-1 block masonary with solid blocks 1:3:6 (using 20mm graded crushed stone aggregate) exc. 10cm in width and setting in cement mortar (1:6), complete all as specified and directed by Engr-in-Charge.

M & L for reinforced cement concrete (nominal mix in) 1:1.5:3 type B1 using 20mm graded stone aggreagate in beams, cantilevers, bressummers, lintels bend etc complete all as directed

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L rendering 15mm thick cement plaster in cement mortor (1:4) finished even & fair without using extra cement on brick/concrete surfaces.

M&L rendering 15mm thick cement plaster in cement mortar (1:6) finished even & smooth without using extra cement on brick/concrete surfaces.

M&L for two coats of oil bound distemper on newly plastered surfaces of walls over a coat of 1 MM thick wall care putty including preparation of surfaces.

M&L for two coats of cement based paint on newly plastered surfaces of walls over a coat of primer including preparation of surfaces.

M&L for scraping,prepartion and applying 1 mm thick wall care putty on old surface and applying two coats of oil bound distemper on old plastered surfaces of walls including preparation of surfaces.

M&L for applying two coats of cement based paint on old plastered surfaces of walls including preparation of surfaces.

S&F PVC floor trap size 110 mm dia outlet with grating including connection to waste pipe with cement joint including taking down existing trap complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep for foundations etc or for shafts cespits, manholes etc not exceeding 10 Sqm on plan and getting out in hard/dense soil, complete all as specified and as directed by Engr-in-Charge.

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with adhesive joint laid in trenches or in floor including taking down existing unserviceable pipe complete all as specified and as directed.

M&L Concrete bed to drain pipe in PCC (1:4:8) Type-D-2, using 40 mm graded stone aggregate including packing under and haunching against the sides of pipes after they are laid and tested, for 100 mm bore of pipe (Earth work shall be measured and paid separately).

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified.

S&F Rolled mild steel Gde Fe-290(Gde Fe 165) in Plates (plain or chequered) channels,angle sections, square cut or notched (ordinary & counter sunk) forming holes, with riveted, bolted or welded attachment.

S&F Mild steel screw bolts of 11 to 15 mm dia of shank (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm and not exceeding 10 cm long.

Taking down carefully copper or aluminium point wiring (light, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, sockets, bulk head fitting, tube light fitting by unscrewing carefully from boards etc and making good, distrubed surface of walls floors etc.

M&L for Point wiring for light/fan/bell with FRLS cable of 1.5 Sqmm PVC insulated (red/blue/yellow for phase, black for neutral and green for earth) unsheathed multistranded copper conductor 1100 volts grade in and including not less than 2mm thick PVC casing caping with all accessories and 1.5sqmm green in colour PVC insulated multistranded copper conductor FRLS cable for earth continuity connected to common earth dolly incl MS sunken box with 3mm thick pre laminated hylum sheet/PVC box flush/surface type for mounting fittings such as switches,socket,and regulator complete all as specified and directed for one light point or bell/buzzer point controlled by one switch.

All as per Srl item No. 81.00 here in before but using cable size 2.5 Sqmm for one 3 pin socket outlet 5 Amps independent board.

All as per Srl item No. 81.00 here in before but using cable size 2.5 Sqmm for one 3 pin socket outlet 15 Amps independent board.

S & F Switch piano flush type 5 Amps, single pole one way.

S & F Switch socket combination 2 in 1, and 3 and 2 pin, 5 Amps flush type.

S & F Switch socket combination 2 in 1, 5 and 15 Amps flush type.

Supply and fixing in LED 1x18 Watt, 220 V, AC decorative box type with driver, holder including LED tubelight connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S & F in Ceiling rose on PVC Square Block surface bakelite 65mmx50mm, two to three terminals.

S&f Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings

Supply and fixing LED bulb 12 watt, 230 volts

S & F in replacement Sheet metal enclosure for DB's Double door, single pole and neutral, 240V, 12 way with 200 Amp rated bus bar including blanking plates where required. Complete all as specified and directed.

S & F in replacement Sheet metal enclosure for DB's Double door, single pole and neutral, 240V, 8 way with 200 Amp rated bus bar including blanking plates where required. Complete all as specified and directed.

Supply and fixing in replacement 240 V 10 KA C curve miniature circuit breaker (MCB) SPN 40 to 63 Amp in the MCB DB complete with connection testing and commissioning.

Supply and fixing in replacement 240 V 10 KA C curve miniature circuit breaker (MCB) SP 5 to 32 Amp in the MCB DB complete with connection testing and commissioning.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, not exceeding 10 sqm on plan and not exceeding 1.5Mtr in depth & getting out of soft/lose soil for taking out cable & laying of cable complete all as specified and directed.

Removal of excavated soil to distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed

Returning filling in including spreading, levelling, watering and well remming in layers not exceeding 25cm thick complete all as specified.

Supply and laying double wall corrugated HDPE (DWC) pipe of size DN 75,pressure rating SN-8, in trenches for protection of cable complete all as specified and directed.

M & L LT UG cable 2 core x 10 sq mm 1100 Volts grade XLPE insulated , armored, heavy duty with aluminium conductor laid in trenches or fixed to walls/ poles or passing through pipes with and including,cable gland lugs/ thimbles/ ferrules including connecting, testing and commissioning complete for the following sizes including taking down existing LT UG cable of any size at site all as specified and as directed. Notes: (a) Excavation,RFR and sand cushioning brick protection etc. Shall be measured and paid separately under relevant item of schedule.

M & L LT UG cable 2 core x 16 sq mm 1100 Volts grade XLPE insulated , armored, heavy duty with aluminium conductor laid in trenches or fixed to walls/ poles or passing through pipes with and including,cable gland lugs/ thimbles/ ferrules including connecting, testing and commissioning complete for the following sizes including taking down existing LT UG cable of any size at site all as specified and as directed. Notes: (a) Excavation,RFR and sand protection pipe etc. Shall be measured and paid separately under relevant item of schedule.

Supply and Fixing GI tubing light grade 40 mm bore as in cable protection fixed to poles/walls or laid intrenches/under road crossing etc. all as specified and as directed.

Supply and fixing in replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding of sweep 250mm.

Supply and fixing in replacement exhaust fan, steel body, AC single phase, 230 V of size 380 mm sweep with blades and frame and louvers.

S&F in replacement of LED Flood light fitting 70 watt 5000 k green/natural white, IP>66 ,grey powder coated die cast aluminium housing, inbuilt energy efficent surge protected electronic driver, with all connected accessories all as specified and directed.

Dismantling and M&L for earthing complete with galvanised steel earth plate electrode of size 60cm×60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to and including GI iron wire of size 4 mm dia by means of GI bolts, nuts, check nuts and washers, protected by 15mm bore GI light grade ISI marked pipe upto and including test points. Earth plate shall be surrounded by alternate layer 15cm thick of charcoal or coke and common salt all around bottom and top, 20mm bore GI medium grade ISI marked pipe for watering and including funnel,wire mesh,PCC chamber pit made with PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) including necessary form work, excavation and earth work in any type of soil, returning filling and disposal of surplus soil to a distance not exceeding 50M, CI pit cover duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified & shown in electrical plate No.3 of SSR 2009(Part-I) and all as directed. Note:- (i) Protection pipe and earthing strip upto test point from top of the earth plate and further upto the body of electrical equipment shall be included in the unit rate of this item. (ii) Earth testing arrangement should be done by contractor as per direction of Engr-in-Charge.

Note : Deduction for amount of Rs. 61,185.41 as listed in Schedule A Part - II ( Schedule of Credit) shall be made while awarding of contract.

Ashfaq Construction Company (BID ID -3147562)

M/S BHAT ENGINEERS (BID ID -3139610)

M/S TRADE LINK (BID ID -3147790)

M/s B R Constructions (BID ID -3148207)

SAMEER CONSTRUCTIONS (BID ID -3141298)

KASHMIR FAIR DEAL SERVICES (BID ID -3140770)