PROVN OF LBC WORK, CERTAIN SPL REPAIR AND MINOR WORK OF AGE B/R-I UNDER GE 969 EWS

Amount

Dismantling of plain or corrugated steel sheeting , any gauge and thickness in roof covering including Nainital or similar pattern roof covering, complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling timber scantling 40 sq cm and over in section in any position as in unframed work, complete all as specified and as directed.

M&L 2nd Class soft wood as in scantling, clean swan timber framed and fixed, complete all as specified and as directed.

All as per above Srl No 5 here-in-before but except timber, complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) and boarding any thickness, including cover fillets complete all as specified and directed.

M&L for 4 mm thick veneered decorative Ply wood, grade 1 (with BWR resin) with decorative face veneers on one face has decorative veneer fixed with nails to timber frame work on ceiling etc, complete all as specified and as directed.

M&L for 4 mm thick veneered decorative Ply wood, grade 1 (with BWR resin) with decorative face veneers on one face has decorative veneer fixed with nails to timber frame work in partition, wall panelling etc, complete all as specified and as directed.

Dismantling timber scantling in fillets rails, posts purlins etc under 40 Sqcm in section in framed work, complete all as specified and as directed.

S & F Second class soft wood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exceeding 13 and not exceeding 25 Sq. cm complete all as specified and directed.

S & F second class soft wood plain fillets square, rectangular or triangular in section, wrought secured with nails, cross sectional area not exceeding 3 Sq. cm complete all as specified and directed.

2nd class soft wood 20 mm thick in facia/eaves boarding fixed with nails in any situation planed one side with butt joints, complete all as specified and as directed.

S&F 2nd Class softwood weather boarding clean swan, plain 20mm thick or feather edges 15mm to 20 mm thick and fixed with 30mm over laps, complete all as specified and as directed.

All as per Srl No 14 here-in-before but except boarding, complete all as specified and as directed.

Hacking out old broken glass from wooden/metal frame of any thickness incl punching or drilling out old glazing pins/springs clips and providing and fixing new ones complete all as specified and as directed.

M&L sheet glass ordinary quality 4.00 mm thick and glazing with oil putty in square n exc 0.50 sqm in each panes fixed to steel or wooden doors and windows frames, complete all as specified and as directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

Demolition cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L 75 mm thickness Cement concrete type D2, 1:4:8 (40mm graded aggregate) as in flooring complete all as specified and as directed.

M&L 40 mm thickness Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in flooring complete all as specified and as directed.

M&L for providing cement concrete 1:3:6 type C1 using 20mm graded aggregate in lintel upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in roof, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as in 75mm thick plinth protection complete all as specified and directed.

M&L for white colour Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry andpointed in white or coloured cement to match over and including cement screed base 15mm screed bed in CM 1:4 and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for coloured Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm. in floors set and jointed over and including cement screed base 15mm screed bed in CM 1:4 and pointed in white or coloured cement to match complete all as specified and as directed.

S&F glazed ceramic coloured tiles 7mm thick 450 x 300mm size in verticle surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over and including 10mm thick plastering with CM (1:4) complete all as specified and as directed.

Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site all as specified and directed.

S&F 2nd Class Soft wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

S&F 2nd class 30 mm thick soft wood (Kail) glazed skeleton shutters open rebated and prepared to receive guage etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc and fitted to chowkats size of members of shutters as specified in SSR Part - I section 8 Clause 8.23 (b) for windows, ventilators etc are provided with stiles and rails, complete all as specified and as directed.

Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (W/out taking off shutters from the frames), complete all as specified and as directed.

S&F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening complete as per manufacturer's specifications and as directed by Engineer-in-Charge

S&F for 30 mm thick factory made solid panel PVC door shutter confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings as directed by Engineer-in-Charge.

MS Cold rolled Butt hinges medium weight 75 mm long complete all as specified and as directed.

S&F Aliminium anodised barrel tower bolts, 75 mm long complete all as specified and as directed.

S&F Aluminium anodised handles, cast type anodised 125 mm long complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and as directed.

Taking down or up 15mm bore GI tubing including cleaning for refixing or removal to store etc.

Taking down or up 20mm bore GI tubing including cleaning for refixing or removal to store etc.

Refixing old 15mm bore GI tubing and connections in new or old position (wall, ceiling, floor etc) complete all as specified and as directed.

Refixing old 20mm bore GI tubing and connections in new or old position (wall, ceiling, floor etc) complete all as specified and as directed.

S&F 15mm bore medium graded GI tubing with all fittings and fixed complete to wall and ceiling or laid in trenches, complete all as specified and as directed.

S&F 20mm bore medium graded GI tubing with all fittings and fixed complete to wall and ceiling or laid in trenches, complete all as specified and as directed.

S&F in repairs 1000 ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI Marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as per specified and directed.

S&F in repairs 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & hihdesity plastec ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms) etc complete all as specified and as directed.

S&F in replacement of 20mm bore gun metal gate valves, with iron wheel head, screwed both ends suitable for iron pipe complete all as specified and as directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe etc complete all as specified and as directed.

S & F Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S & F in repair PVC low level cistern of 10 lit capacity inclusive of brackets and PVC bend long type and connection to flush pipe of any size and pattern with inlet ball valve float and handle and Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete of approved make complete all as specified and directed.

S&F Vitreous china squatting pan "Orissa pattern" size 580x440 mm white with integral foot rest(exclding flushing cistern and flush pipe) including connection to trap, etcand to flushing pipe 90 mm long, sntysyponage pipe, etc, complete making good to floor, complete all as specified and as directed.

S&F Vitreous China wash hand basin with pedestal, white, flat back size 550x400mm excluding tap, chain, plug but including brackets and cutting for providing ends of brackets fixed in repair complete all as specified and as directed.

S & F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality, complete all as specified and as directed.

S & F in repair PVC connection 15 mm size with PTMT nuts of length 600 mm of approved quality, complete all as specified and as directed.

S&F in repair 15 mm bore Angular stop valve cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F Central hole basin mixer Brass CP for mixing hot & cold water screwed down for iron pipe and fixed for mixing hot and cold water screwed down for iron pipe and fixed for 15mm dia bore pipe fixed in repair complete all as specified and as directed.

S&F Wall mixer two-in- one Brass CP for mixing hot & cold water screwed down for iron pipe and fixed for mixing hot and cold water screwed down for iron pipe and for OH shower fixed for 15mm dia bore pipe fixed in repair complete all as specified and as directed.

S&F of Bib tap chromium plated in repair of 15 mm dia bore, screwed for iron pipe, or for brass ferrule complete all as specified and as directed.

S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges, complete all as specified and as directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S&F in repair CP soap tray fixed to walls with rubber plugs complete all as specified and directed.

S&F 125mm dia CP grating doom with/without waste hole (Minimum weight 40 gms) complete all as specified and as directed.

Excavation in trenches in any type of soil, n exc 1.5 M wide and n exc 1.5 M deep for foundation, etc or for shafts, wells, manholes etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out soft and loose soil complete all as specified and as directed.

Returning filling in incl spreading leveling, watering and well ramming in layers n exc 25 cm in any type of soil, complete all as specified and as directed.

Removing excavated materials n exc 50M and depositing where directed at a level n exc 1.5 M above the starting point, complete all as specified and as directed.

M&L Brick work with sub class 'B' burnt bricks (old size bricks) straight on curved on plan exc 6 M mean radius built in CM (1:4) complete all as specified and directed.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4), complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth complete all as specified and as directed.

Providing, precast cement concrete type B1 1:2:4 (20 mm graged aggregate) as in manholes cover slab, etc.(of any section indicated), with plain fair faces, including chamfers weatherings, throating etc. and setting in mortar complete with joints to match complete all as specified and as directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.

All as per item No. 69 above but 5mm dia and above including 10mm dia in stirrups. complete all as specified and directed.

Rendering 10mm thick in patches in cement mortar 1:6 on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement, complete all as specified and as directed.

S & F 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint laid in trenches or in floors etc complete all as specified and as directed.

M&L for concrete bed to drain pipes in PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate including packing under haunching against the sides of pipe after they are laid and tested for 150mm dia, complete all as specified and as directed.

Cutting in to existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for as specified dia of pipe 150mm.

Taking down pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc

S & F 75 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls etc complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) Bends with accesss door etc complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) Bends with accesss door etc complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) junction single (Single T) equal of unequal, complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) junction single (Single T) equal of unequal, complete all as specified and as directed.

M&L for 125/110 mm PVC (SWR) trap setting and jointed with solvent cement complete all as specified and as directed.

M&L for 75 mm PVC (SWR) floor trap setting and jointed with solvent cement complete all as specified and as directed.

Preparation of old painted surface of wood and wood based surface any description not otherwise described over 10cm width or girth including knotting and stopping and all preparation work required and applying one coat of synthetic enamel paint complete all as specified and as directed.

Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and as directed.

Preparation of old surface including brooming down or steel wire brushing scrapping down smoke soot moulds moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of cement base paint on old plastered or un-plastered surface of walls complete all as specified and as directed.

Excavaton in post holes (or similar holes) each n.exc 0.5 cm, getting out, returning filling in and ramming earth or broken rubble mixd with earth aound in layers n.exc 25cm in hard/dense soil, complete all as specified and as directed.

M&L Plain Cement concrete Type D-2, 1:4:8 (40mm graded aggregate), in foundation, filling and mass concrete, complete all as specified and as directed.

M&L Plain Cement concrete Type B-2, 1:2:4 (40mm graded aggregate), in foundation, filling and mass concrete, complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks (Old size) straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 complete all as specified and as directed.

M&L Rendering 10 mm thick in cement and sand mortar (1:4) on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M & L Rendering 15 mm thick in cement and sand mortar (1:4) on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing with using integral waterproofing compound @ 3% by weight of cement including finishing the surface even and smooth without using extra cement complete all as specified. (Note: W P C shall be measured and paid separately).

Preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed.

M & L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

S&F Roof trusses, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.

M&L Preparation of new steel surfaces of any description over 10 cm width or girth and priming with red oxide zinc chrome and painting with two coats of synthetic enamel paint on Steel sheeting as in roofing complete all as specified and as directed.

S&F steel ventilators with top hung shutter including hinges steel peg stay, squares no.exc 0.50 Sqm in each pane, complete all as specified and as directed.

S&F Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified and as directed.

S&F 150mm long aluminium anodised, barrel tower bolt ISI marked complete all as specified and as directed.

S&F 150mm long aluminium anodised cast type alumiinium handle SI marked complete all as specified and as directed.

S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 110 mm bore of pipe, complete all as specified and as directed.

S&F for PVC (SWR) gully trap, plain with grating including jointing with solvent cement 110 mm bore complete all as specified and as directed.

S&F vitreous china urinal, Half Stall type, white (excluding flusing cistern, flush pipe and waste pipe complete all as specified and as directed.

S & F 75mm bore PVC (SWR) pipe single sokete any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

S & F 110mm bore PVC (SWR) bend, plain including jointing with solvent cement complete all as specified and as directed.

S & F 110mm bore PVC (SWR) vent cowl, plain including jointing with solvent cement complete all as specified and as directed.

S&F 15mm bore Angle valve, fancy type chromium plated high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as specified and as directed.

S&F mild steel framed work such as grills, frame work of water taks FE 290 Gde E-165, complete all as specified and as directed.

S&F 3 layer PPR pipes 25mm dia abore SDR 7.4 & SDR 11 UV staablished and antimicrobial welded having thermal stability for hot and cold water, complete all as specified and as directed.

S&F 3 layer PPR pipes 20mm dia abore SDR 7.4 & SDR 11 UV staablished and antimicrobial welded having thermal stability for hot and cold water, complete all as specified and as directed.

S&F 500 Ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

S&F 25mm PPR Gate valve inserted as per requirement of site, complete all as specified and as directed.

S&F Vitreous china wash basin 600mmx450mm including waste pipe, coupling and brackets etc complete all as specified and directed.

M & L 75mm thick PCC (1:3:6) type C-2 using 20mm graded stone aggregate as in plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified and as directed.

M&L For PCC Type D2 (1:3:6), (using 40 mm graded stone aggregate) as in foundation, filling, and mass concrete, complete all as specified and as directed.

M&L for Mild steel angle iron for fencing posts and strut in fencing and flat iron fillets (for securing wire mesh) including cutting tops to shape as directed all necessary drilling, post bolting or riverting etc and similar work conforming to Fe 290 Gde E-165, complete all as specified and as directed.

M&L Round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less then 0.9mm dia or securing with clips complete all as specified and as directed. (as in Horizontal bar of fencing)

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provission of binding wire Note : Supply only chain link fencing and line wire will be measured and paid separately.

Supply only chain link MS galvanised fencing, any size or type, Complete all as specified and as directed.

S&F for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt ecx 10cm nut n. exc 20cm long and dia of neck 11 to 16mm, Complete all as specified and as directed.

M&L for preparation of new or previously untreated steel surfaces of any description two coat of synthetic enamel paint over coat or Red oxide primer over steel surfaces n. exc 10cm width or girth, complete all as specified and as directed.

S&F galvanised 2 strand,steel barbed wire 2.24mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails staining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line wire to be measured).

S&F Punched Tape concertina coil (incl spike and handle) with 50 turn and dia 1050mm. Max covered length 10 RM having a core wire of high carbon spring steel of high tensile strength. The punched tape and core wire (2.6+0.035 mm dia) are electro galvanised to provided protection against out door expose. The punched tape is machnically crimped over the core wire and the formed into a coil at various parts of the periphery of the coil steel clips total 129 nose per coil spaced to connect the individual turns of the coil to each other so that it opens up like an accordion. The width of strip as 19 mm and spacing be 15.2+5% kgs without packing material and coil length 15 mtr when opened up with an effective height 915 mm. Each coil wound with bituminized hessain cloth for providing protective packing, complete all as specified and as directed.

Demolition of brick work, cement concrete block masonary, stone masonary or boulder masonary built in cement mortar, complete all as specified and as directed.

M&L for walling or random rubble, uncoursed well bounded bedded and solidly hearted, built in cement mortar (1:4) complete all as specified and as directed.

All as per item No. 124 above but except stone only complete all as specified and as directed.

Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface n.exc 40mm to face stones and dressing of face beds and joints, as specified of random rubble walling,uncoursed or brought upto courses for Granite or Trap Stone, complete all as specified and as directed.

Taking down cement plaster of any description etc including racking out joints hacking for key, scrubbing down with water etc, complete all as specified and as directed.

Raking out joints/ pointing to random rubble or polygonal rubble uncoursed or brought up to courses built in cement mortar complete all as specified and as directed.

M&L raised pointing in cement mortar (1:4) to random rubble masonary, uncoursed or brought upto courses complete all as specified and as directed.

Preparing surfaces of newly plastered or undecorated walls and applying three coats of white wash complete all as specified and as directed.

Complete removal of existing treatment on old wall surfaces and applying three coats of white wash complete all as specified and as directed.

Demolition of cement concrete (reinforced) in any position and any thickness (below or above ground level) complete all as specified and as directed.

M&L cast in situ cement concrete Type B-1, 1:2:4, (20 mm graded aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands etc complete all as specified and as directed.

M&L for 75mm thick cement concrete type B- 2, 1:2:4 (40mm graded aggregate) as in flooring and finished even and smooth without using extra cement complete all as specified and as directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F Sheet glass thickness 3 mm, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane comnplete all as specified and as directed.

Preparation of surfaces of any description, n exc 10 Cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint on steel surfaces complete all as specified and as directed.

Taking down carefully copper/aluminum point wiring (light. Fan, socket or power) complete, incl fittings such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc

M&L for point wiring in concealed PVC Casing caping with 1.5 Sqmm size multi stranded FRLS copper conductor cable 1.5 Sqm including clamps, screws guttier/plug etc PVC unsheathed cable into and including suitable board with sheet and PVC insulated FRLS cable of size 1.5 Sqmm as earth continuity conductor, complete all as specified and as directed.

(a) One light point/fan point/Exhaust fan point controlled by one 5 Amps switch one way

(b)One 3 pin 5 Amp switch socket outlet on independent board.

(c)One 3 pin 5 Amp switch socket outlet on same board with accessories

M&L for point wiring in PVC casing caping with 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated fire retardant cable of size 2.5 Sqmm as earth continuity conductor.

S&F switch piano Flush type, single pole, one way 6 amp 240 volts, complete all as specified and as directed.

S&F switch piano Flush type, single pole, one way 15 amp 240 volts, complete all as specified and as directed.

S&F Socket outlet 2 in 1, 3 pin, 5 Amps, flush type complete all as specified and as directed.

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 Amps, flush type complete all as specified and as directed.

S&F Ceiling rose, 3 Terminal/PVC/ polycarbonate type with black plate suitable for batten fitting, complete all as specified and as directed.

S&F in repairs Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240V with 200 Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires complete all as specified and as directed.

S&F in repairs MCB, DP 40 Amps 240 Volts B curve, complete all as specified and as directed.

S&F MCB Single pole 6-32A Amps 240 Volts B curve, complete all as specified and as directed.

S&F LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F LED light fitting 1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F LED bulb 12 W, 220V suitable size from ceiling rose all as specified and as directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F in repairs Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting complete all as specified and as directed.

S&F in repairs Stepped type electronic fan regulator flush type on the existing phenolic laminated sheet complete all as specified and as directed.

S&F in repair capacitor 1.5/2 mfd suitable for 1200mm sweep ceiling fan complete all as specified and as directed.

S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc

M & L sub main wiring with two run single core 6 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia PVC conduit/casing caping, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 6 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete all as directed. Note: Two runs of 6 sqmm and one run of 6 sqmm cable and one run of casing capping shall be measured as one RM

Taking down and dismantling the ceiling fan from site and removing its allied smaller parts for cleaning, servicing, oiling and lubricating and replacement of unserviceable parts such as bearings, bushes, etc and refixing the same fan in its original position with all the parts i.e. down rod, canopies, fan blades, spilt pins, screws, nuts and spring washers complete including, flexible chord of 24 / 0.20mm with necessary connector (for blade / body) as required after rewinding Complete all as specified and directed by Engineer-In-Charge. Note : Spares used and rewinding shall be measured and paid seperatly under relevant item.

M&L in repairs for earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1, 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is ilnclusive of necessary earth work, RFR and removal etc

S&F switch Modular type, single pole, one way 6 amp 240 volts, complete all as specified and as directed.

S&F Modular Socket, 6A- 2/3 pin combined 2 module, 2 in 1, 3 pin, complete all as specified and as directed.

S&F switch modular type single pole one way 16 amp 240 volts,1 Module complete all as specified and as directed.

S&F Modular Socket, 6A/16A - 2/3pin combined 2 module, 2 in 1, 3 pin, 16 Amps complete all as specified and as directed.

S&F in repair White cover plate with frame, 3 module complete all as specified and as directed.

S&F in repair White cover plate with frame, 6 module complete all as specified and as directed.

S&F in repairs MCB, SPN 63 Amps 240 Volts C curve, complete all as specified and as directed.

S & F exhaust fan/brisk air fan of size 150 mm sweep, non matallic complete all as specified and as specified and as directed.

S&F 1100 V grade heavy duty cable with pvc insulated aluminium conductor served with an inner sheathing of pvc tape and overall pvc sheathed in service connection suspended by insulating hangers not more than 1mtr apart including 4mm Suspension wire one twin core cable flat or circular of size 10 Sqmm complete all as specified and as directed.

S&F Switch socket combination 2 in1, 3 pin,5 Amps and 15 Amp flush type,universal complete all as specified and as directed.

S&F 1100 V grade heavy duty U/G cable with pvc insulated aluminium conductor served with an inner sheathing of pvc tape and overall pvc sheathed one twin core cable flat or circular of size 16 Sqmm x 2 complete all as specified and as directed.

Supply and filling dry river sand in trenches including spreading for cushioning of LT UG cable and punning down complete all as specified and as directed. Note : Punned down thickness shall be measured and paid

M&L for well burnt as class 'B' bricks as mechanical protection to under ground cables laying with length of the bricks equal to the width of the trench complete all as specified and as directed.

Supply and fix LED inverter Bulb 12 Watt.

M&L for point wiring in concealed PVC conduit with 1.5 Sqmm size multi stranded FRLS copper conductor cable 1.5 Sqm including clamps, screws guttier/plug etc PVC unsheathed cable into and including suitable board with sheet and PVC insulated FRLS cable of size 1.5 Sqmm as earth continuity conductor, complete all as specified and as directed.

(a) One light point/fan point/Exhaust fan point controlled by one 5 Amps switch one way

(b) One 3 pin 5 Amp switch socket oulet on independent board.

Note:- Schedule of credit Rs 68,357.12 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

MS QADRI BUILDERS (BID ID -3086439)

ALI MOHD NAJAR (BID ID -3087085)

HAYAT TRADING CORPORATION (BID ID -3087552)

M/S ESS EMM ENTERPRISES (BID ID -3088406)

M/S SUMJI BROTHERS (BID ID -3086264)

M/s ABDUL AHAD AND SONS (BID ID -3086170)