REPAIR TO STEEL FURNITURE AT MILITARY STATION KOTA

Amount

CHAIR TUBULAR STEEL WITH ARMS FD-75 (M)

S&F in replacement seat of chair tubular steel with arms made of 1st class hard wood (Shisham) duly black painted with two coats of synthetic enamel paint (spray painted) over a coat of primer and canned with plastic cane 2mm wide and fixed with nuts, bolts and washers, complete all as specified, shown on drawing and directed.

S&F in replacement back of chair tubular steel with arms made of 1st class hard wood (Shisham) duly black painted with two coats of synthetic enamel paint (spray painted) over a coat of primer and canned with plastic cane 2mm wide and fixed with nuts & bolts and washer, complete all as specified, shown on drawing and directed.

S&F in replacement arm rest of chair tubular steel with arms made of 1st class hard wood (Shisham) duly black painted with two coats of synthetic enamel paint (spray painted) over a coat of primer, complete all as specified, shown on drawing and directed.

S&F in replacement flat iron strips of chair tubular steel with arms made of 20x3mm MS flat section welded under the seat of chair tubular steel with arms and applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

S&F in replacement shoe of chair tubular steel with arms with new hard rubber/ PVC shoe superior quality, fixed with steel screws, complete all as specified and as directed.

M & L for preparation of surfaces of steel frame of chair steel tubular with arms and carrying out repairs such as necessary welding wherever required including a coat of red oxide primer on welded surfaces and providing two new caps and applying one coat of synthetic enamel paint olive green/smoke grey (spray painted), complete all as specified, shown on drawing and directed.

CHAIR TUBULAR STEEL WITHOUT ARMS - FD-75 (M)

S&F in replacement seat of chair tubular steel without arms made of 1st class hard wood (Shisham) duly black painted with two coats of synthetic enamel paint (spray painted) over a coat of primer and canned with plastic cane 2mm wide and fixed with nuts, bolts and washers, complete all as specified, shown on drawing and directed.

S&F in replacement back of chair tubular steel without arms made of 1st class hard wood (Shisham) duly black painted with two coats of synthetic enamel paint (spray painted) over a coat of primer and canned with plastic cane 2mm wide and fixed with nuts & bolts and washer, complete all as specified, shown on drawing and directed.

S&F in replacement flat iron strips of chair tubular steel without arms made of 20x3mm MS flat section welded under the seat of chair tubular steel with arms and applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

S&F in replacement shoe of chair tubular steel without arms with new hard rubber/ PVC shoe superior quality, fixed with steel screws, complete all as specified and as directed.

M & L for preparation of surfaces of steel frame of chair steel tubular without arms and carrying out repairs such as necessary welding wherever required including a coat of red oxide primer on welded surfaces and providing two new caps and applying one coat of synthetic enamel paint olive green/smoke grey (spray painted), complete all as specified, shown on drawing and directed.

Table Office Officers Steel, FD-84 (M), 1003

S&F in replacement leg of Table office officers steel made of 25mm square pipe having wall thickness 1.6mm including applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

S&F in replacement long rail/stiffener of table office officers steel made of 25mm square pipe having wall thickness 1.6mm applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

S &F in replacement drawers of Table office officers steel made of 1mm thick MS Sheet duly finished with standard workmanship applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

S &F in replacement lock of table office officers steel with new lock (4 lever brass lock) with duplicate keys for drawers/cupboard, complete all as specified, shown on drawing and directed. Make: Godrej/ Harrison/ Link

M & L for spot welding of broken joints 25mm to 75mm long and metal thickness not exceeding 3mm and applying a coat of synthetic enamel paint over a coat of red oxide primer after preparation of welded surface, complete all as specified, shown on drawing and directed.

S &F in replacement top of table office officers steel made of 17/18 mm thick exterior grade prelaminated particle board one side teak face and balancing white on other side including 4mm thick first class teak wood beading alround, complete all as specified, shown on drawing and directed.

S&F in replacement shoe of table office officers steel with new hard rubber/PVC shoe superior quality, complete all as specified, shown on drawing and directed.

M & L for preparation of all exposed surfaces of steel frame and drawers of table office officers steel (inside and out side) and applying one coat of synthetic enamel paint olive green/smoke grey (spray painted), complete all as specified, shown on drawing and directed.

Table Office Clerk Steel FD-84 (M), 1004

S&F in replacement leg of Table office clerk steel made of 25mm square pipe having wall thickness 1.6mm including applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

S&F in replacement long rail/stiffener of table office clerk steel made of 25mm square pipe having wall thickness 1.6mm applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

S &F in replacement drawers of Table office clerk steel made of 1mm thick MS Sheet duly finished with standard workmanship applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

S &F in replacement lock of Table office clerk steel with new Lock (6 lever brass levers) with duplicate keys for drawers, complete all as specified, shown on drawing and directed. Make: Godrej/ Harrison/ Link

M & L for spot welding of broken joints 25mm to 75mm long and metal thickness not exceeding 3mm and applying a coat of synthetic enamel paint over a coat of red oxide primer after preparation of welded surface, complete all as specified, shown on drawing and directed.

S &F in replacement top of Table office clerk steel made of 17/18 mm thick exterior grade prelaminated particle board one side teak face and balancing white on other side including 4mm thick first class teak wood beading alround duly polished, complete all as specified, shown on drawing and directed.

S&F in replacement shoe of Table office clerk steel with new hard rubber/PVC shoe superior quality, complete all as specified, shown on drawing and directed.

M & L for preparation of all exposed surfaces of steel frame and drawers of table office clerk steel (inside and out side) and applying one coat of synthetic enamel paint olive green/smoke grey (spray painted), complete all as specified, shown on drawing and directed.

Locker Steel FD-257, FD-1029

S &F in replacement leg of Locker steel made of 1mm thick MS Sheet duly finished with standard workmanship including applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

S &F in replacement shutter of Locker steel made of 1mm thick MS Sheet duly finished with standard workmanship including applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

S &F in replacement bottom (base) of Locker steel made of 1mm thick MS Sheet duly finished with standard workmanship including applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

S &F in replacement hinges of Locker steel with new 75mm long MS thick MS hinges, complete all as specified, shown on drawing and directed.

S &F in replacement handle of Locker steel with new 100mm long chromium plated handle, complete all as specified, shown on drawing and directed.

S &F in replacement hasp and staple of Locker steel with new 100 x 40 x 3mm thick MS chromium plated hasp and staple, complete all as specified, shown on drawing and directed.

S &F in replacement socket of Locker steel with new socket MS chromium plated for fixing of 20 mm dia hanging rod, complete all as specified, shown on drawing and directed.

S &F in replacement hanging rod of Locker steel with new 20 mm dia 1.6mm thick MS CP conduit pipe, complete all as specified, shown on drawing and directed.

M & L for preparation of all exposed surfaces of locker steel (inside and outside) and applying one coat of synthetic enamel paint olive green/smoke grey hemotone (spray painted), complete all as specified, shown on drawing and directed.

Teapoy Verandah FD- 255, 383

S &F in replacement leg of Teapoy verandah made of 20mm dia MS conduit pipe of 1.6mm wall thickness (U Shape) duly welded with existing shape & size including applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

S &F in replacement long rail of Teapoy verandah made of 25x3 mm MS flat iron duly welded with existing shape & size including applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

M & L for spot welding of broken joints 25mm to 75mm long and metal thickness not exceeding 3mm and applying a coat of synthetic enamel paint over a coat of red oxide primer after preparation of welded surface, complete all as specified, shown on drawing and directed.

S&F in replacement top of teapoy verandah made of 17/18 mm thick exterior grade prelaminated particle board one side teak face and other side balancing white including 4mm thick first class teak wood beading alround dully polished, complete all as specified, shown on drawing and directed.

S&F in replacement shoe of Teapoy verandah with new hard rubber/PVC shoe superior quality as specified and as directed.

M & L for preparation of exposed surfaces of steel frame of teapoy verandah and applying one coat of synthetic enamel white paint (spray painted), complete all as specified, shown on drawing and directed.

Table Dining ORs FD- 165 M

S&F in replacement leg of table dining ORs made of 25mm square pipe having wall thickness 1.6mm including applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

S&F in replacement long rail / long stiffener of Table dining ORs made of 25mm square pipe having wall thickness 1.6mm including applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

S&F in replacement short rail / short stiffener of Table dining ORs made of 25mm square pipe having wall thickness 1.6mm including applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

M & L for spot welding of broken joints 25mm to 75mm long and metal thickness not exceeding 3mm and applying a coat of synthetic enamel paint over a coat of red oxide primer after preparation of welded surface, complete all as specified, shown on drawing and directed.

S&F in replacement shoe of Table dining ORs with new hard rubber/PVC shoe superior quality as specified and as directed.

S&F in replacement top of the Table dining ORs made out of 17/18 mm thick Pre-Fabricated Particle board with 22 gauge aluminium sheet of top complete all as specified, shown on drawing and directed.

M & L for preparation of exposed surfaces of steel frame of table dining ORs and applying one coat of synthetic enamel Black/OG paint (spray painted), complete all as specified, shown on drawing and directed.

Table Dining 900mm x 900mm x 760mm Steel FD- 165 M, 1009

S&F in replacement leg of Table dining 900 x 900 x 760 mm steel made of 25mm square pipe having wall thickness 1.6mm including applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

S&F in replacement rail of Table 900 x 900 x 760 mm steel made of 25mm square pipe having wall thickness 1.6mm including applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

M & L for spot welding of broken joints 25mm to 75mm long and metal thickness not exceeding 3mm and applying a coat of synthetic enamel paint over a coat of red oxide primer after preparation of welded surface, complete all as specified, shown on drawing and directed.

S &F in replacement top of Table dining 900 mm x 900 mm x 760 mm steel made of 17/18 mm thick exterior grade prelaminated particle board one side teak face and other side balancing white including 4mm thick first class teak wood beading alround duly polished, complete all as specified, shown on drawing and directed.

S&F in replacement shoe of Table 900 x 900 x 760 mm steel with new hard rubber/PVC shoe superior quality, complete all as specified and as directed.

M & L for preparation of exposed surfaces of steel frame of Table 900 x 900 x 760 mm steel and applying one coat of synthetic enamel smoke grey/OG paint (spray painted), complete all as specified, shown on drawing and directed.

Chair Verandah FD- 256, 359

Removal of unserviceable cane from Chair Verandah, scraping existing paint from frame and carrying out repairs such as necessary welding wherever required and M & L for painting with two coats of synthetic enamel white paint over a coat of primer wherever required and M & L for recanning with white or cream ivory plastic cane 4mm wide including replacing of hard rubber/PVC shoe, complete all as specified, shown on drawing and directed.

S&F in replacement leg of chair verandah made of 20/25 mm dia MS conduit pipe of 1.60 mm wall thickness (U shape) duly welded with existing shape and size including applying a coat of synthetic enamel paint (spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawings and directed.

Almirah Large steel with Shelves FD- 67 M, 1031

S &F in replacement leg of almirah large steel made of 1mm thick MS Sheet with appropriate welding/ rivetting duly finished with standard workmanship including applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

S &F in replacement bottom (base) of Almirah Large steel made of 1mm thick MS Sheet with appropriate welding/riveting duly finished with standard workmanship including applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

S &F in replacement shelves of Almirah Large steel made of 1mm thick MS Sheet with appropriate welding / rivetting duly finished including applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

S &F in replacement handle of Almirah Large steel with new chromium plated handle (Superior Quality) of existing size, shape, complete all as specified, shown on drg and directed.

S &F in replacement lock of Almirah Large steel with new Lock (6 brass levers) with duplicate keys for drawers, rest all as shown on drg and as directed. Make: Godrej/ Harrison/ Link

S &F in replacement locking assembly of Almirah Large steel with new locking assembly with cover including applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

M & L for preparation of all exposed surfaces of almirah large steel with shelves (inside and outside) including carrying out repairs such as necessary welding/riveting and applying filler (putty) wherever required and applying one coat of synthetic enamel paint olive green/smoke grey/hemotone (spray painted), complete all as specified and directed.

Almirah Medium steel with Shelves FD- 67 M, 1032

S &F in replacement leg of Almirah medium steel made of 1mm thick MS Sheet with appropriate welding/riveting duly finished with standard workmanship including applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

S &F in replacement botom (base) of Almirah medium steel made of 1mm thick MS Sheet with appropriate welding/riveting duly finished with standard workmanship including applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

S &F in replacement shelves of Almirah medium steel made of 1mm thick MS Sheet with appropriate welding/ rivetting duly finished including applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

S &F in replacement handle of Almirah medium steel with new chromium plated handle (Superior Quality) of existing size, shape complete all all as shown on drg and as directed.

S &F in replacement locking assembly of Almirah Large steel with new locking assembly with cover including applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drg and directed.

S &F in replacement lock of almirah medium steel with new Lock (6 brass levers) with duplicate keys for drawers, Make: Godrej/ Harrison/ Link, rest all as shown on drg and as directed by Engr-in-Charge.

M & L for preparation of all exposed surfaces of almirah medium steel with shelves (inside and outside) including carrying out repairs such as necessary welding/riveting and applying filler (putty) wherever required and applying one coat of synthetic enamel paint olive green/smoke grey/hemotone (spray painted), complete all as specified and directed.

Desk, FD-33,107,1021

S&F in replacement box of Desk made of 17/18 mm thick exterior grade prelaminated particle board, both side teak face laminated including 4 mm thick of first class hard wood teak wood beading alround the top duly fixing in position and polishing of beading after repair work, complete all as specified, shown on drawing and directed.

S&F in replacement shoe of desk with new hard rubber/PVC shoe of superior quality, complete all as specified and directed.

M & L for preparation of exposed surfaces of steel frame of desk and applying one coat of synthetic enamel smoke grey/OG paint (spray painted), complete all as specified, shown on drawing and directed.

Table Computer, FD/E6/MAP/03

S&F in replacement top of Table computer made of 17/18 mm thick exterior grade prelaminated particle board exterior grade one side teak face and other side balancing white including 4 mm thick first class teak wood beading alround the top duly polished, complete all as specified, shown on drawing and directed.

S&F in replacement key board tray of Table computer made of 17/18 mm thick exterior grade prelaminated particle board exterior grade one side teak face and other side balancing white including 4 mm thick of first class teak wood beading alround duly polished, complete all as specified, shown on drawing and directed.

S&F in replacement sliding/telescopic channel of table computer with new sliding channel of approved quality (replace in pair), complete all as specified, shown on drawing and directed.

Supply and fixing in replacement knob/handle of table computer with new knob of 30 to 40mm dia aluminum anodised and fixed with machine screws, complete all as specified, shown on drawing and directed.

S&F in replacement leg of Table computer made of 25x50mm rectangular MS pipe having wall thickness 18 gauge including PVC cover and applying a coat of synthetic enamel paint (spray painted) over coat of primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

S&F in replacement shoe of Table computer with new hard rubber/PVC shoe (leg with nylon Buffer) of superior quality, complete all as specified and directed.

Chair school with hand board, FD/E6/MAP/05

S&F in replacement of openable clamp steel of chair school with hand board made of 25 mm dia hollow steel pipe with stiffener, complete all as specified, shown on drawing and as directed.

S&F in replacement openable top of chair school with hand board made of 17/18 mm thick prelaminated particle board, exterior grade, both side teak face, including alround 2 mm thick PVC beading, complete all as specified, shown on drawing and as directed.

TABLE BED SIDE (MAP), FD/E6/MAP/15(R)

S&F in replacement broken handle of table bed side, superior quality, and fixed in existing position, complete all as shown on drg and as directed.

S&F in replacement top of table bed side (MAP) made of 17/18 mm thick prelaminated melamine face particle board, exterior grade, including alround 2 mm thick PVC beading, complete all as specified, shown on drawing and as directed.

S&F in replacement front side of small drawer of table bed side (MAP) made of 17/18 mm thick prelaminated particle board, exterior grade, one side teak face lamination and other side balancing white, including alround 2 mm thick PVC beading, complete all as specified, shown on drawing and as directed.

S&F in replacement front side of large drawer of table bed side (MAP) made of 17/18 mm thick prelaminated particle board, exterior grade, one side teak face lamination and other side balancing white, including alround 2 mm thick PVC beading, complete all as specified, shown on drawing and as directed.

TABLE BED SIDE STEEL FD- 133 (M)

S&F in replacement top of table bed side steel made of 1 mm thick MS sheet with appropriate welding/rivetting duly finished with standard workmanship including applying a coat of synthetic enamel paint (spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

S&F in replacement side of table bed side steel made of 1 mm thick MS sheet with appropriate welding/rivetting duly finished with standard workmanship including applying a coat of synthetic enamel paint (spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

M & L for spot welding of broken joints 25mm to 75mm long and metal thickness not exceeding 3mm and applying a coat of synthetic enamel paint over a coat of red oxide primer after preparation of welded surface, complete all as specified, shown on drawing and directed.

Dual Desk (for class I to V) (CWE/ KOTA/ 1R/ 2013)

S&F in replacement 25 mm square MS pipe of 18 gauge thickness, 2 Nos for seat support and applying one coat of synthetic enamel smoke grey/OG paint (spray painted) over a coat of red oxide zinc chromate primer, complete all as specified, shown on drawing and directed.

S&F in replacement 25 mm square MS pipe of 18 gauge thickness, 2 Nos for back support and applying one coat of synthetic enamel smoke grey/OG paint (spray painted) over a coat of red oxide zinc chromate primer, complete all as specified, shown on drawing and directed.

S&F in replacement shoe of Dual Desk with new hard rubber/PVC shoe of superior quality, complete all as specified, shown on drawing and directed.

M & L for preparation of exposed surfaces of steel frame of dual desk and applying one coat of synthetic enamel smoke grey/OG paint (spray painted), complete all as specified, shown on drawing and directed.

Dual Desk (for class VI to VIII) (CWE/ KOTA/ 1R/ 2013)

S&F in replacement 25 mm square MS pipe of 18 gauge thickness, 2 Nos for seat support and applying one coat of synthetic enamel smoke grey/OG paint (spray painted) over a coat of red oxide zinc chromate primer, complete all as specified, shown on drawing and directed.

S&F in replacement 25 mm square MS pipe of 18 gauge thickness, 2 Nos for back support and applying one coat of synthetic enamel smoke grey/OG paint (spray painted) over a coat of red oxide zinc chromate primer, complete all as specified, shown on drawing and directed.

S&F in replacement shoe of Dual Desk with new hard rubber/PVC shoe of superior quality, complete all as specified, shown on drawing and directed.

M & L for preparation of exposed surfaces of steel frame of dual desk and applying one coat of synthetic enamel smoke grey/OG paint (spray painted), complete all as specified, shown on drawing and directed.

Dual Desk (for class IX to XII) (CWE/ KOTA/ 1R/ 2013)

S&F in replacement 25 mm square MS pipe of 18 gauge thickness, 2 Nos for seat support and applying one coat of synthetic enamel smoke grey/OG paint (spray painted) over a coat of red oxide zinc chromate primer, complete all as specified, shown on drawing and directed.

S&F in replacement 25 mm square MS pipe of 18 gauge thickness, 2 Nos for back support and applying one coat of synthetic enamel smoke grey/OG paint (spray painted) over a coat of red oxide zinc chromate primer, complete all as specified, shown on drawing and directed.

S&F in replacement shoe of Dual Desk with new hard rubber/PVC shoe of superior quality, complete all as specified, shown on drawing and directed.

M & L for preparation of exposed surfaces of steel frame of dual desk and applying one coat of synthetic enamel smoke grey/OG paint (spray painted), complete all as specified, shown on drawing and directed.

Form without back , Drg No.FD- 77 (M), 97 (M), 1027

M&L for electric spot welding of broken joints of 25mm square pipe including removing excess welding material and preparation of surface and applying a coat of red oxide primer and over it applying a coat of synthetic enamel paint, rest all as shown on drg and as directed.

S&F in replacement legs of form without back made of 25mm square pipe 1.6mm thick in proper size, duly welded to main frame, rest all as shown and specified on drg.

S&F in replacement shoe of form without back with new Hard PVC shoe of superior quality as specified and shown on drg.

Removing of old unserviceable seat plank of form without back and supply & fixing new wrought finish seat plank of size 1800/1900x255x25 mm made of first class hard wood (Shisham wood) duly finished with existing shape and fixed with screws and washers and applying french polishing on all exposed wooden surfaces including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings

M&L for preparation of old painted surface of frame of form without back and applying one coat of 1st quality synthetic enamel paint, complete all as specified and directed.

Form with back , Drg No.FD- 78 (M)

M&L for electric spot welding of broken joints of 25mm square pipe including removing excess welding material and preparation of surface and applying a coat of red oxide primer and over it applying a coat of synthetic enamel paint, rest all as shown on drg and as directed.

S&F in replacement legs of form with back made of 25mm square pipe 1.6mm thick in proper size, duly welded to main frame, rest all as shown and specified on drg.

S&F in replacement back rest frame of form with back made of 25mm square pipe 1.6mm thick in proper size, duly welded to main frame, rest all as shown and specified on drg.

S&F in replacement shoe of form with back with new Hard PVC shoe of superior quality as specified and shown on drg.

Removing of old unserviceable seat plank of form with back and supply & fixing new wrought finish seat plank of size 1800x255x25 mm made of first class hard wood (Shisham wood) duly finished with existing shape and fixed with screws and washers and applying french polishing on all exposed wooden surfaces including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings

All as per item 21.05 herein before but back plank, complete all as specified and directed.

M&L for preparation of old painted surface of frame of form with back and applying one coat of 1st quality synthetic enamel paint, complete all as specified and directed.

Chair Revolving , Drg No.TP & FD/E6/MAP/01

Supply and fixing in replacement seat of chair revolving made of 100mm thick foam cushion 32 Kg/Cum density, covered with new approved quality tapestory cloth, complete all as specified and directed.

Supply and fixing in replacement of back of chair revolving made of 100mm thick foam cushioned 32 Kg/Cum density, covered with new approved quality tapestory cloth, complete all as specified and directed.

Supply and fixing in replacement best quality hydraulic system of chair revolving as per the sample kept in BSO office, complete all as specified and directed.

Supply and fixing in replacement arms of chair revolving as per the sample kept in BSO office, complete all as specified and directed.

Supply and fixing in replacement pedestal (bottom) of chair revolving consisting of five legs with twin wheel coastors as per the sample kept in BSO office, complete all as specified and directed.

Table 900 x 600 x 760mm with or without drawer steel, Drg No.FD-1008,1007

S&F in replacement legs of table 900 x 600 x 760mm steel with or without drawer, made of 25mm square pipe 1.6mm thick, in proper size, rest all as shown and specified on drg.

S&F in replacement stiffener of table 900 x 600 x 760mm steel with or without drawer, made of 25mm square pipe 1.6mm thick, in proper size, rest all as shown and specified on drg.

S&F in replacement drawer of Table 900 x 600 x 760mm steel with drawer made of 1mm thick MS sheet in size and shape as shown on drawings, complete all as specified and directed.

S&F in replacement lock of Table 900 x 600 x 760mm steel with drawer, with duplicate keys, four lever, made of brass, shape as shown and specified on drg.

S&F in replacement Handle of Table 900 x 600 x 760mm with drawer made of PVC, of size and shape as shown and specified on drg.

S&F in replacement superior quality hard PVC shoe of Table 900 x 600 x 760mm steel with/without drawer, complete all as specified and shown on drg.

S&F in replacement Top of Table 900 x 600 x 760mm with or without drawer steel made out of 17/18 mm thick Prelaminated prelaminated particle board exterior grade, ISI marked, one side teak finish and other side balancing white duly fixed with 4 mm thick first class hard wood (teak wood) beading allround the top, fixed with steel screw, all as shown and specified on drg.

M&L for preparation of old painted surface of frame of Table 900 x 600 x 760mm with or without drawer steel and applying one coat of 1st quality synthetic enamel paint, complete all as specified and directed.

Rack steel 1830x1905x760 mm, FD - 129

M & L for spot welding of broken joints 25mm to 75mm long and metal thickness not exceeding 3mm and applying a coat of synthetic enamel paint over a coat of red oxide primer after preparation of welded surface, complete all as specified, shown on drawing and directed.

M&L for preparation of old painted surface of rack steel 1830x1905x760mm and applying one coat of 1st quality synthetic enamel paint, complete all as specified and directed.

Screen moveable with cloth, FD -83

S&F in replacement spring with curtain cloth of screen moveable in proper size, rest all as shown and specified on drg.

M&L for preparation of old painted surface of screen moveable and applying one coat of 1st quality synthetic enamel paint, complete all as specified and directed.

Stool adjustable steel, FD-103/1026

S&F in replacment cushion with rexine of stool adjustable steel in proper size, rest all as shown and specified on drawing.

M&L for preparation of old painted surface of stool adjustable steel and applying one coat of 1st quality synthetic enamel paint, complete all as specified and directed.

DESK STAND LECTURE, FD-1022

S&F in replacement front side of desk stand lecture made to size with 17/18 mm thick prelaminated particle board, exterior grade, one side natural teak face and other side balancing white including providing 4 mm thick half round teak wood beading on exposed edges, complete all as specified and directed.

All as per item 27.01 herein before but replacement of top of desk stand lecture, complete all as specified, shown on drawing and as directed.

All as per item 27.01 herein before but replacement of side (left or right) of desk stand lecture, complete all as specified, shown on drawing and as directed.

All as per item 27.01 herein before but replacement of upper shelf of desk stand lecture, complete all as specified, shown on drawing and as directed.

All as per item 27.01 herein before but replacement of lower shelf of desk stand lecture, complete all as specified, shown on drawing and as directed.

SK INDUSTRIES