Work

Amount

Work of reviving SCADA system M/s Siemens make at 220 KV substation Kursi Road, Lucknow. The work shall include detailed re-survey, supply of hardware (if any), deputation of skilled SCADA engineer for successful trouble shooting of existing software & hardware pertaining to SCADA system installed at this substation:

1 A) Configuration and refurbishment of existing old SCADA system. The work shall include following services for ensuring smooth & healthy SCADA operation: i. Checking of all required events, alarms, dates & signals to SCADA from various bays and BCUs. ii. Modification of SCADA system of old & existing bays as per requirement. iii. Checking and rectifying healthiness of existing IEC 61850-7 Ethernet switch in existing panel. iv. Checking of defective FO cables & its healthiness. v. Checking the healthiness of all protection relays communication with SCADA

1 B) Supply & installation of FO cables/patch cord/LIU and its related hardware as per site requirement. - Checking healthiness and rectification of faults/issues of FO network. - Splicing and termination of FO cable of each kiosk. - Checking & modification work to complete the network communication for smooth functioning of SCADA system.

1 C) Providing and installation of Industrial CPU with following specifications: - Intel® core™ i3-3220 CPU, frequency 3.30 GHz - 16 GB DDR3 Memory - 1 TB SATA HDD -10/100/1000 Mbps LAN ethernet onboard - USB & 1*VGA part on board - USB keyboard and optical mouse - Single power supply - Latest windows 64 Bit OS Suitable for existing SCADA system installed at Substation Control Room, including installation of all software related to backup system, if required as per site condition.

2) Work related to synchronising of relays installed in C&R panels in all kiosks at 220KV substation Kursi Road, Lucknow with SANDS make GPS system:

2 A) The work shall include: - Rechecking of clock healthiness along with accessories. - Rechecking and configuration of clock network. - Re-configuration of GPS clock as per existing schematic for time synchronisation. - Reconfiguration of relay, if required for time synchronisation. - Validation of time in each relay with GPS clock on SNTP/NTP protocol .

2 B) Providing and fixing cable and accessories for installation of GPS TSE.

2 C) Visit of relay engineer for configuration /reconfiguration of relay , if required, for time synchronisation. This shall cover visit and service charges of all relay engineers of M/s Siemens, M/s ABB, M/s CGL, any other company's relay engineer as per site requirement. (One Job for One Man Day)

ELECTRO POWER SERVICES AND SOLUTIONS (BID ID -4930166)

AR POWER AUTOMATION (BID ID -4934445)