Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.9 CrAdmitted-Finance 505 THE SUMMIT BUSINESS BAY ANDHERI EAST MUMBAI MAHARASHTRA 400093 | MUMBAI SUBURBAN | MAHARASHTRA | 400093 | ₹2.9 Cr | L1 | Admitted-Finance |
| 2 | L2₹3.0 Cr+₹2.0 L (0.69%)Admitted-Finance 5 A 5TH FLOOR NEPTUNE TOWER PRODUCTIVITY ROAD ALKAPURI VADODARA GUJARAT 390007 UDYAM GJ 24 0001307 | VADODARA | GUJARAT | 390007 | ₹3.0 Cr+₹2.0 L (0.69%) | L2 | Admitted-Finance |
| 3 | L3₹3.6 Cr+₹61.3 L (20.8%)Admitted-Finance | ₹3.6 Cr+₹61.3 L (20.8%) | L3 | Admitted-Finance |
| 4 | L4₹5.7 Cr+₹2.8 Cr (93.9%)Admitted-Finance SR NO 110 HISSA NO 7 CS NO 376 NEAR BPCL REFINERY MAIN GATE MAHUL VILLAGE MUMBAI MAHARASHTRA 400074 | MUMBAI SUBURBAN | MAHARASHTRA | 400074 | ₹5.7 Cr+₹2.8 Cr (93.9%) | L4 | Admitted-Finance |
| Sl No | Description | Qty | Unit | Rotostat Services Pvt Ltd L1 | Radiant Hitech Eng Pvt Ltd L2 | Daynite Engineers And Contractors Pvt Ltd L4 | Excellent Projects (I) Pvt Ltd L3 |
|---|---|---|---|---|---|---|---|
| 1.00Maintenance & Testing of process heat exchangers (Floating head & U-tube type): Wherever required, piping spools & valves to be dismantled to facilitate removal of end covers and same to be re-erected back after maintenance of HEx's. Gaskets of all the Flange joints within first isolation valves in inlet, outlet, vent and drain lines of HEX shall be replaced (servicing of valves is excluded). Heat Exchanger channel covers, floating head & shell covers are to be removed, Tube bundle shall be removed from HX shell, re-insertion of bundle after cleaning of tube outside surfaces by hydro-jetting, cleaning of shell and inspection, Pass partion plates as well as flange surfaces to be reconditioned by welding followed by grinding, lapping etc. Cleaning of inside surface of tubes by hydrojetting, air drying of tubes (tubes surface inspection & ECT of tubes shall be done by HWPK), cleaning of fasteners., plugging of defective tubes by TIG welding followed by DP test, Ring testing for checking leaky tubes & tube-tube sheet joints, Air testing of all SS liners provided in end covers & shell; its repair, wherever required, by TIG welding using 309Mo filler wire, Refixing of covers with suitable size gaskets and successful hydro testing of shell as well as tube side of each heat exchanger as per the technical specifications of the tender. | |||||||
| 1.10 | 3731 EX 1A-1B to 3A-3B (FH) | 6 | Nos | 4,25,955 ₹25,55,730 Lowest | 4,75,000 ₹28,50,000 | 9,82,910 ₹58,97,460 | 5,42,800 ₹32,56,800 |
| 1.20 | 3731 EX 4A-4B to 9A-9B (FH) | 12 | Nos | 4,25,955 ₹51,11,460 Lowest | 4,50,000 ₹54,00,000 | 4,93,564 ₹59,22,768 | 4,95,600 ₹59,47,200 |
| 1.30 | 3101 EX 1A-1B to 4A-4B (FH) | 8 | Nos | 4,25,955 ₹34,07,640 Lowest | 4,50,000 ₹36,00,000 | 7,08,708 ₹56,69,664 | 4,48,400 ₹35,87,200 |
| 1.40 | 3201 EX 1A-1B to 2A-2B (FH) | 4 | Nos | 4,25,955 ₹17,03,820 | 4,50,000 ₹18,00,000 | 5,41,655 ₹21,66,620 | 4,24,800 ₹16,99,200 Lowest |
| 1.50 | 3301 EX 1A-1B to 2A-2B (FH) | 4 | Nos | 4,25,955 ₹17,03,820 | 4,50,000 ₹18,00,000 | 2,40,454 ₹9,61,816 Lowest | 4,24,800 ₹16,99,200 |
| 1.60 | 3601 RX1 (U-tube) | 1 | Nos | 2,79,533 ₹2,79,533 | 3,56,000 ₹3,56,000 | 59,480 ₹59,480 Lowest | 1,41,600 ₹1,41,600 |
| 1.70 | 3601 CWX1 (U-tube) | 1 | Nos | 2,79,533 ₹2,79,533 | 3,51,500 ₹3,51,500 | 49,356 ₹49,356 Lowest | 1,41,600 ₹1,41,600 |
| 2.00Maintenance & Testing of Floating Head Type Heat Exchangers (Tube bundle removal not envisaged): Wherever required, piping spools & valves to be dismantled to facilitate removal of end covers and same to be re-erected back after maintenance of HEx's. Gaskets of all the valves & flange joints within first isolation of heat exchanger in inlet, outlet, vent and drain lines of HEX shall be replaced (servicing of valves is excluded). Heat Exchanger channel covers, floating head & shell covers are to be removed, Pass partition plates as well as flange surfaces to be reconditioned by welding followed by grinding, lapping etc. Cleaning of inside surface of tubes by hydrojetting, air drying of tubes (tubes surface inspection & ECT of tubes shall be done by HWPK), cleaning of fasteners., plugging of defective tubes by TIG welding followed by DP test, Ring testing for checking leaky tubes & tube-tube sheet joints, Air testing of all SS liners provided in end covers, its repair wherever required by TIG welding using 309Mo filler wire. Refixing of covers with suitable size gaskets and successful hydro testing of shell as well as tube side of each heat exchanger as per the technical specifications of the tender. | |||||||
| 2.10 | 3101 RX 1 & RX3 | 2 | Nos | 1,77,481 ₹3,54,962 Lowest | 2,75,000 ₹5,50,000 | 7,08,708 ₹14,17,416 | 2,83,200 ₹5,66,400 |
Tender Value
₹3.3 Cr
EMD Value
₹6.6 L
Closing Date
12 Jun 2025, 2:30 pmClosed
GM HWPK
GM office, heavy water plant kota , anushakti via kota
Maintenance and testing of Heat Exchangers at HWPK site during MTA 2025
2025_HWB_859227_1
HWPK/MECH-HEX/MTA-25/443
Open Tender
Machineries/ Mechanical Engg Items
Works
60 days
heavy water plant kota, anushakti via kota
As per tender documents
8 documents required · 8 mandatory
₹0
₹6.6 L
gm office hwpk
7 Aug 2025
9 May 2025
18 Jun 2025
9 May 2025
12 Jun 2025
15 May 2025
13 May 2025 - 14 May 2025
15 May 2025
Amount
Maintenance & Testing of process heat exchangers (Floating head & U-tube type): Wherever required, piping spools & valves to be dismantled to facilitate removal of end covers and same to be re-erected back after maintenance of HEx's. Gaskets of all the Flange joints within first isolation valves in inlet, outlet, vent and drain lines of HEX shall be replaced (servicing of valves is excluded). Heat Exchanger channel covers, floating head & shell covers are to be removed, Tube bundle shall be removed from HX shell, re-insertion of bundle after cleaning of tube outside surfaces by hydro-jetting, cleaning of shell and inspection, Pass partion plates as well as flange surfaces to be reconditioned by welding followed by grinding, lapping etc. Cleaning of inside surface of tubes by hydrojetting, air drying of tubes (tubes surface inspection & ECT of tubes shall be done by HWPK), cleaning of fasteners., plugging of defective tubes by TIG welding followed by DP test, Ring testing for checking leaky tubes & tube-tube sheet joints, Air testing of all SS liners provided in end covers & shell; its repair, wherever required, by TIG welding using 309Mo filler wire, Refixing of covers with suitable size gaskets and successful hydro testing of shell as well as tube side of each heat exchanger as per the technical specifications of the tender.
3731 EX 1A-1B to 3A-3B (FH)
3731 EX 4A-4B to 9A-9B (FH)
3101 EX 1A-1B to 4A-4B (FH)
3201 EX 1A-1B to 2A-2B (FH)
3301 EX 1A-1B to 2A-2B (FH)
3601 RX1 (U-tube)
3601 CWX1 (U-tube)
Maintenance & Testing of Floating Head Type Heat Exchangers (Tube bundle removal not envisaged): Wherever required, piping spools & valves to be dismantled to facilitate removal of end covers and same to be re-erected back after maintenance of HEx's. Gaskets of all the valves & flange joints within first isolation of heat exchanger in inlet, outlet, vent and drain lines of HEX shall be replaced (servicing of valves is excluded). Heat Exchanger channel covers, floating head & shell covers are to be removed, Pass partition plates as well as flange surfaces to be reconditioned by welding followed by grinding, lapping etc. Cleaning of inside surface of tubes by hydrojetting, air drying of tubes (tubes surface inspection & ECT of tubes shall be done by HWPK), cleaning of fasteners., plugging of defective tubes by TIG welding followed by DP test, Ring testing for checking leaky tubes & tube-tube sheet joints, Air testing of all SS liners provided in end covers, its repair wherever required by TIG welding using 309Mo filler wire. Refixing of covers with suitable size gaskets and successful hydro testing of shell as well as tube side of each heat exchanger as per the technical specifications of the tender.
Maintenance & Testing of Fixed tube sheet type Heat Exchangers (i.e. HXs with no floating head) Wherever required, piping to be dismantled by the successful bidder and same to be re-erected back after maintenance of heat exchanger is over. Gaskets of all the valves & flange joints with in first isolation of heat exchanger shall be replaced. Heat Exchanger shell & channel covers are to be removed, liner shall be air tested, liner as well as flange surfaces to be reconditioned by welding followed by grinding, lapping etc. Cleaning of inside surface of tubes by hydro-jetting, air drying of tubes (ECT inspection of tubes shall be done by HWPK after hydro-jetting & air drying of tubes). Shell testing to check any leaky tube & integrity of tube-tube sheet joints, plugging of defective tubes by TIG welding followed by DP test, re-fixing of covers and successful hydro testing of shell as well as tube side of each heat exchanger as per the technical specifications given in part II of the tender.
Maintenance & Testing of U Tube Heat Exchanger: SS Liners are not there hence their testing and repair is not required. All other jobs are same as in ‘02’ above. The USI No. of Exchanger is 7211RAHIE 1, 2
Maintenance & Testing of seal oil & lube coolers of H2S gas compressors: Gaskets of all the Flange joints within first isolation of HEX shall be replaced. Heat Exchanger channel covers, floating head & shell covers are to be removed, Tube bundle shall be removed from HX shell, Cleaning of tube outside surfaces , inside surfaces & shell shall be done using kerosene or suitable solvent, re-insertion of bundle, Pass partion plates as well as flange surfaces to be reconditioned by welding followed by grinding, lapping etc., cleaning of fasteners., Refixing of covers with suitable size gaskets and successful hydro testing of shell as well as tube side of each heat exchanger as per the technical specifications of the tender.
3921 CWX 1 to 6
Maintenance & Testing of Fixed tube sheet type Heat Exchangers (i.e. HXs with no floating head) Wherever required, piping to be dismantled by the successful bidder and same to be re-erected back after maintenance of heat exchanger is over. Gaskets of all the valves & flange joints within first isolation of heat exchanger shall be replaced. Heat Exchanger shell & channel covers are to be removed, liner shall be air tested, liner as well as flange surfaces to be reconditioned by welding followed by grinding, lapping etc. Cleaning of inside surface of tubes by hydro-jetting, air drying of tubes (ECT inspection of tubes shall be done by HWPK after hydro-jetting & air drying of tubes). Shell testing to check any leaky tube & integrity of tube-tube sheet joints, plugging of defective tubes by TIG welding followed by DP test, re-fixing of covers and successful hydro testing of shell as well as tube side of each heat exchanger.
Flange facing of gasket seating surface of flanges of heat exchanger main shell/ channel covers/shell covers/ floating head covers etc. Wherever required, flange facing of gasket seating surface of flanges will be carried out using electrically operated inside/outside mounting flange facing machine. The flange faces having observed deep pitting marks all over the surface shall be consider for flange facing followed by lapping.
Main shell flanges
Channell cover flanges (Having partition plate, only outside mounting flange facing machine may be used)
Shell Cover Flanges
Floating Head Cover Flanges (Having both type with and without partition plate, both inside and outside mounting flange facing machine may be used)
Radiant Hitech Eng Pvt Ltd (BID ID -3220276)
Excellent Projects (I) Pvt Ltd (BID ID -3226923)
Daynite Engineers And Contractors Pvt Ltd (BID ID -3230744)
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
BOQ.xls
BOQ • 0.29 MB
Tenderdocument.pdf
Tender Documents • 0.04 MB
Tenderdocument_2.pdf
Tender Documents • 0.62 MB
Tenderdocument_3.pdf
Tender Documents • 0.54 MB
Tenderdocument_4.pdf
Tender Documents • 0.17 MB
Tenderdocument_5.pdf
Tender Documents • 0.87 MB
Tenderdocument_6.pdf
Tender Documents • 2.18 MB
Tenderdocument_7.pdf
Tender Documents • 0.48 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .