Loading…
Loading…
Tender Value
₹1.8 Cr
EMD Value
₹2.4 L
Closing Date
19 Feb 2026, 4:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
TENDER
14 conditions · 2 needing a document upload
Financial Eligibility Criteria as per Clause 10.2 of Part-I of IRSGCC-2022 and ACS No.1 dt 14.07.22: The tenderer must have minimum average annual contractual turnover of 'V/N' Or 'V' whichever is less; where V=Advertised value of the tender in crores of Rupees; N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-F (Annexure-VIB of GCC), along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria: as per Clause 10.1 of Part-I of IRSGCC-2022 (a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b)(1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfilment of technical eligibility criteria for different components. Note for Item 10.1 of IRSGCC-2022: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organization, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate.
Similar nature of work: "An OFC or OFC & Quad or Quad cable work, which involves laying and jointing of OFC cables/Quad cables." (As per CSTE/Plg/SC lr no. SG. 36.I.PC.Vol.6 dt: 01.03.2007)
20 conditions · 7 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
(1) Tenderers should attach self-attested copy of PAN and GST Registration Certificate & Photo identification in support of their Identity. (2) The documents attached to the tender should be clear and legible for evaluation of tender. Proper care to be taken in this regard.
When work is tendered for by a firm or company of contractors, the tender shall be digitally signed by the individual legally authorized to enter into commitments on their behalf duly furnishing Power of Attorney in the name of bidder invariably (POA to be enclosed).
As per conditions mentioned in the Tender document.
Latest GCC and its Amendments/Advanced Correction slips from time to time will be applicable.
Telecom arrangements in connection with replacement of defective Quad cable between. PGRL-TMLU, MRGA-KDGL, VLG-RMNP, NLPI-RPCA, RPCA-SYM sections for improving reliability of communication over Guntur division
GNT-SG-36-365
GNT-SG-36-365
Open
Works - General
12 Months
Guntur, Andhra Pradesh
₹0
₹2.4 L
19 Feb 2026
27 Jan 2026
74 items across 5 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 26,22,620 | ||
| — | 70.00 | — | — | ||
| Supply of Full size GKP type Location Boxes as per drg.No. S&T/MFT/T.2378 (INSPECTION BY RITES) | — | — | — | 11,35,120 | |
| — | 200.00 | — | — | ||
| Supply of Thermo shrink jointing kit for jointing underground0.9mm dia conductor 6 quad cable as per specification IRS:TC 77-2012 Rev. 3 (Amd. 1 to Amd. 3) or latest. (INSPECTIONBY RDSO) | — | — | — | 7,43,000 | |
| — | 50.00 | — | — | ||
| Supply of emergency socket six pin flat with 6 pin suitable plug as per specification IRS: TC 42-87 with Amd. 1, 2, 3 or latest. (INSPECTION BY CONSIGNEE) | — | — | — | 19,450 | |
| — | 150.00 | — | — | ||
| Supply of Vulco Tape of size45mm width x 1.5mm thickness x 10m length. It shall be self-bonding type anti corrosive, heat resistant and water proof. (INSPECTION BY CONSIGNEE) | — | — | — | 3,10,950 | |
| — | 70.00 | — | — | ||
| Supply of Universal Locks with one steel key for every ten locks or part there of (For example, if locks ordered is 10, 1 key is to be supplied and if locks ordered is 20, 2 keys to be supplied. However, 2 keys to be supplied if locks ordered is between 11and 19).(INSPECTION BYCONSIGNEE) | — | — | — | 13,650 | |
| — | 10.00 | — | — | ||
| Supply of Surveyor's Wheel (rodometer), (INSPECTION BYCONSIGNEE) | — | — | — | 42,450 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Tender-Document.pdf
Tender-Form.pdf
GCC-2022-and-ACS.pdf
Annexure-V-and-VA.pdf
Checklist.pdf
JPO-Cable-Cuts.pdf
NEFT-Form.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .