Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.9 LAccepted-AOC | L1 | Accepted-AOC lowest quoted amount. | |
| 2 | L2₹20.4 L+₹50,690 (2.54%)Rejected-Finance | L2 | Rejected-Finance Higher side quoted amount. |
Tender Value
Refer Docs
EMD Value
₹41,000
Closing Date
16 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Khumbathang
CWE Khumbathang
PROVN OF two 50000 LTR WATER STORAGE TANK AT KAKSAR BN UNDER GE KARGIL
2023_MES_574844_1
80051/134/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
Kargil
As per tender and NIT doc
8 documents required · 8 mandatory
₹500
GE Kargil
₹41,000
20 Mar 2023
13 Jan 2023
18 Feb 2023
13 Jan 2023
16 Feb 2023
27 Jan 2023
Amount
Earth work in excavation all kind of soil by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-incharge
All as per Srl item No. 1 here-in-before but for depth exc 1.5 m and n.exc 3.0 m.
All as per Srl item No. 1 here-in-before but for depth exc 3.0 m and n.exc 4.5 m.
All as per Srl item No. 1 here-in-before but for depth exc 4.5 m and n.exc 6 m.
M&L for Plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed by the Engr-in-Charge.
M&L for RCC Design mix, M-30 ( using 20 mm graded crushed stone aggregate ) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete (Note:-TMT bars will be masured and paid sepretly)
M&L for RCC Design mix, M-30 ( using 20 mm graded crushed stone aggregate ) as in walls, retaining walls, basement, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttersses etc. complete all as specified and as directed. (Note:-TMT bars will be masured and paid sepretly)
M&L for RCC Design mix, M-30 ( using 20 mm graded crushed stone aggregate ) as in slab supoported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc. complete all as specified and as directed. (Note:-TMT bars will be masured and paid sepretly)
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter
Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick, fair finshed flat surfaces of concrete
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.
S&F mild steel TMT bars 10 mm dia and over, cut to length , bent to shape required including cranking , bending spirally for hooping for columns, hooking ends, binding with and including mild steel wire ( annealed ) not less than 0.9mm dia , complete all as specified and directed by Engr-in-Charge.
S&F mild steel TMT bars 6 to 8 mm dia and over, cut to length , bent to shape required including cranking , bending spirally for hooping for columns, hooking ends, binding with and including mild steel wire ( annealed ) not less than 0.9mm dia , complete all as specified and directed by Engr-in-Charge.
All as per item No. 14 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders
Supply only Liquid water proofing compound.
M&L for waterproofing treatment to internal surfaces of RCC walls and RCC floor slab with two coat of cement base polymer/acrylic modified highely flexible water proofing coating of Dr. Fixit/Pidilite/Sika or equivalent make as approved by GE as per manufacturers instruction complete all as specified and as directed by Engg-in-Charge Note:-waterleakage/ponding test in full supply level will be carried as per IS 3370 Part-I for 7 days.
M&L for providing 4mm thick 150mm wide PVC water bar for construction joint in water retaining structure complete as directed by Engg-in-charge.
M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete. (confirming to Fe-410-W(Gde-E-250) quality -B complete as directed by Engg-in-charge.
M&L for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment (confirming to Fe-410-W(Gde-E-250) complete as directed by Engg-in-charge.
S&F 125mm long butt hinges, medium weight, cold rolled mild steel
M&L for preparation of new surfaces of steel of any description , over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge ..
Returning filling in including spreading, levelling, watering and well remming in layers not exceeding 25cm thick in hard/dense soil complete all as specified.
Removing surplus soil to a distance exc 1.5 Km and not exc. 5.0 Km and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed by Engr-in-Charge.
M/S Mohd Sadiq
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .