REPAIR AND POLISHING TO VARIOUS WOODEN FURNITURE AT AF STATION JAMNAGAR UNDER GE AF JAMNAGAR NO 1

Amount

Removing following old and unserviceable parts / components of “Bed Plywood Top” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw, etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD 246, 247)

Head rest complete.

Foot rest complete.

Plywood top with 12 mm thick BWR commercial .

Long rail of first class hard wood (teak wood).

Short rail of first class hard wood (teak wood).

Both side veneered Head Rest.

Both side veneered Foot Rest

Removing following old and unserviceable parts / components of “Chair dining with cushioned ” and S & F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD/MAP-II/04)

Front Leg made of one piece of first class hard wood (teak wood).

Rear Leg made of one piece of first class hard wood (teak wood).

Bottom stiffener long made of one piece of first class hard wood (teak wood).

Bottom stiffener short made of one piece of first class hard wood (teak wood).

Short rail of seat made of one piece of first class hard wood (teak wood).

Long rail of seat made of one piece of first class hard wood (teak wood).

Complete seat made out of 75 mm thick 32 density foam with 12 mm thick plywood base, upholstered with tapestry.

Removing following old and unserviceable parts / components of “CHAIR EASY” and S & F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw, etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-229)

Front / Rear legs made of first class hard wood (teak wood).

Arm rest made of first class hard wood (teak wood).

Seat Front / Rear / side rail made of first class hard wood (teak wood).

Back Upper / bottom rail made of first class hard wood (teak wood).

Removing following old and unserviceable parts / components of “CHAIR DINING ” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw, etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-279, FD/MAP-II/05)

Front legs made of first class hard wood (Teak wood).

Rear legs made of first class hard wood (Teak wood).

long / short rail of seat made of first class hard wood (Teak wood).

Stiffener of back made of first class hard wood (Teak wood).

Short & long stiffener of bottom made of first class hard wood (Teak wood).

Complete seat made out of 4 mm thick PVC with holes and screwed with frame as per drawing all as directed by Engineer-in-charge (FD/MAP-II/05).

Removing following old and unserviceable parts / components of “Chair Writing” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. Drg No FD-250, 280, 285

Front legs of first class hard wood (teak wood)

Rear legs of first class hard wood (teak wood)

Front/ Rear/ Slide rail of seat made of first class hard wood (Teak wood)

Stiffener of back made of first class hard wood (Teak wood)

Short/ long stiffener of bottom made of first class hard wood (Teak wood)

M&L for Removing the existing worn-out cane and Recanning of furniture articles except chair verandah with new standard 2 mm wide plastic cane of semi circular type with border of 4 mm wide plastic cane all as specified and as directed by Engr-In-Charge.

Removing following old and unserviceable parts / components of “ PEG TABLE” and S&F new parts / components of same size, existing pattern with necessary beading, screw, etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-236 & 277)

Removing old u/s tops from peg table and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge.

Legs of first class hard wood (teak wood)

Short rail of first class hard wood (teak wood)

Long rail of first class hard wood (teak wood)

Removing following old unserviceable parts/ components of " HAT STAND WITH MIRROR" and S&F new parts/ components of same size, existing pattern and same material, with beading, screw etc all as shown on drawing & as directed by Engineer-in-charg. (Drg No FD-233)

5 mm thick looking mirror of size and specification as per drawing

3 mm thick Veneered plywood of size and specification as per drawing

9 mm thick Back plywood of size and specification as per drawing

Aluminium Peg of size and specification as per drawing.

Repairs to Recliner by replacing of unserviceable seat / back cushion foam with tapestry cloth / rexin / leatherite and other accessories what so ever required as per existing pattern / structure and sample approved by Engr - in - Charge. (Drg No.Stellar,Godrej,Durian).

Repairs to Sofa set 5 Seater by Replacing of unserviceable seat / back cushion foam with tapestry cloth / rexin / leatherite and other aceesories what so ever required as per existing pattern/structure and sample approved by Engr - in - Charge. (Drg No. HOF/Godrej/Durian.

Removing following old and unserviceable parts / components of “SOFA 4 SEATER & SOFA 5 SEATER” and S & F new parts / components of same size, existing pattern and same material, with beading, screw, etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No - FD - 281 / 258 / 373)

Arms made out of teakwood of size and specification as per drawing.

Front leg made out of teakwood

Rear leg made out of teakwood

Batten for seat and back made out of teak wood

M&L replacement of old u/s seat/back cushions, S&F new foam cushion of size 21"x20"x100 mm thick, 32 density (Make : Sleepwell/Kurlon) duly covered with tapestry cloth of approved quality /colou/texture (cost of tapestry shall not be less than Rs 180/- per meter) all as specified and directed.

M&L for replacement of old u/s tapestry cloth of seat/ back cushion with new tapestry cloth of approved quality/ colou/texture (cost of tapestry shall not be less than Rs 180/- per meter) all as specified and directed.

Removing following old and unserviceable parts / components of “Table centre” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. Drg No FD-235 & 274

Removing old unserviceable tops from Table center and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge.

Legs of first class hard wood (teak wood) of size and specification as per drawing.

Short rail of first class hard wood (teak wood) of size and specification as per drawing.

Long rail of first class hard wood (teak wood) of size and specification as per drawing.

Removing following old and unserviceable parts/ components of " TABLE DINING 6/ 8 PERSON" and S&F new parts/ components of same size, existing pattern and same texture with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. Drg No FD-239 & 273)

Removing old unserviceable tops from Table dining 06 persons and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge.

Top for TABLE DINING 8 PERSON made all as per items ser No 13.01

Legs made of first class hard wood (teak wood)

Short rail made of first class hard work (teak wood)

Long rail for TABLE DINNING 6 PERSON made of first class hard wood (teak wood)

Long rail for TABLE DINNING 8 PERSON made of first class hard wood (teak wood)

Removing following old and unserviceable parts / components of “Table dressing gents with mirror” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD 230)

5 mm thick Looking Mirror with 06 mm thick plywood at the back with complete frame of first class hard wood

Lower wooden box made out of 18 mm thick pre-laminated particle board exterior grade(ISI marked) and one side French polishing, 6 mm thick back plywood & knob 40mm dia complete all as specified in drg as directed by Engr-in-charge.

Removing following old and unserviceable parts / components of “Teapoy wooden” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw, etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-232 & 278)

Removing old unserviceable tops from Teapoy wooden and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drawing and as directed by Engr-in-charge.

Legs of first class hard wood (teak wood)

Short rail of first class hard wood (teak wood)

Long rail of first class hard wood (teak wood).

Removing following old and unserviceable parts / components of “TABLE 3' x 2' WITH & WITHOUT DRAWER” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw, etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-41, 224, 283)

Removing of old unserviceable top of table 3 x 2 and S&F new top made out of 18mm thick pre-laminated particle board exterior grade type II (ISI marked) one side teak face & other side with PVC beading all around all as specified in drawing and as directed by Engr-in-charge.

Leg made of first class hard wood (teak wood).

Long rail made of first class hard wood (teak wood).

Short rail made of first class hard wood (teak wood).

Long bottom stiffeners made of first class hard wood (teak wood).

Short bottom stiffeners made of first class hard wood (teak wood).

Complete drawer made out of 12 mm thick plywood.

Removing following old and unserviceable parts / components of “Table 3 x 3 wooden” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-88 M, 291)

Removing of old unserviceable top of table 3 x 3 and S&F new top made out of 18mm thick pre-laminated particle board exterior grade type II (ISI marked) one side teak face & other side with PVC beading all around all as specified in drawing and as directed by Engr-in-charge.

Leg made of first class hard wood (teak wood).

Long rail made of first class hard wood (teak wood).

Short rail made of first class hard wood (teak wood).

Long bottom stiffeners made of first class hard wood (teak wood).

Short bottom stiffeners made of first class hard wood (teak wood).

Removing following old and unserviceable parts / components of “TABLE WRITING (STUDY) ” and S & F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc complete all as shown on drawing & as directed by Engineer-in-charge. Drg No FD-33 & 275, 249.

Top made out of 18 mm thick pre-laminated particle board with exterior grade type II (ISI marked) one side teak face & other side with PVC beading all around all as specified in drawing and as directed by Engr-in-charge.

Legs made of first class hard wood (teak wood).

Complete drawer made out of 12 mm thick plywood.

Shutters made out of 18 mm thick pre-laminated particle board with exterior grade type II (ISI marked) one side teak face & other side with PVC beading all around all as specified in drawing and as directed by Engr-in-charge.

Removing following old and unserviceable parts / components of “TABLE DRESSING LADIES” and S & F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD - 251)

Looking Mirror of approved quality with back of 06 mm plywood and frame

Lower wooden box with drawer made out of 18 mm thick pre-laminated particle board with exterior grade type II (ISI marked) one side teak face & other side with PVC beading all around, 6 mm thick back plywood, 4 mm thick sliding glass, Aluminium channel etc complete all as per drawing.

S & F wooden bracket made of first class hard wood (Teak wood) fixing legs to long and short rail various types of wooden table(Table dining, table writing, Table 3x2, Bed plywood top) fixed with 2 Nos screws and duly polishing to match with existing complete as directed by Engr-in-charge.

M&L for preparation of old polished surface of following wooden furniture article by emery paper to get the surfaces smooth and applying one or more coat of French polish / clear Varnish as directed by Engr-in-Charge :

Bed plywood (FD 246 & 247)

Chair dining (FD 279 & FD/MAP-II/05)

Chair Dining FD/MAP-II/04

Chair dining long back (FD-357 )

Chair easy (FD-229)

Chair writing (FD 250,280)

Hat stand with mirror (FD- 233 & 362)

Peg table (FD- 236 & 277)

Sofa set 5 seater (FD- 258, 281 & 373)

Sofa set 4 seater (FD- 258, 281 & 373)

Table dining for 6 persons (Drg No - FD 239, 273)

Table dining for 8 persons (Drg No - FD 239, 273)

Table writing (Drg No - FD 249,275

Table centre (Drg No - FD-274)

Table dressing gents with mirror (Drg No - FD 230, FD/E6/MAP/16)

Table dressing ladies with mirror (Drg No - FD 378,251 FD/MAP-II/07 )

Teapoy (Drg No - FD-232,278)

Table 900 x 600 x 760 w/o drawer (Drg No - FD 223,224,283)

M/S Rajendra Constructions

M/S Super Steel Works

M/S Badri Electicals

Vinayak Distributors

S t modi

Dhangot Brothers