Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.8 LAccepted-AOC VILL KHAIJAPUR P O BELKULAI DIST HOWRAH 711322 | HOWRAH | WEST BENGAL | 711322 | ₹1.8 L | L1 | Accepted-AOC L1 |
| 2 | L2₹1.8 L+₹355.93 (0.20%)Rejected-Finance | ₹1.8 L+₹355.93 (0.20%) | L2 | Rejected-Finance L2 |
| 3 | L3₹1.8 L+₹444.91 (0.24%)Rejected-Finance | ₹1.8 L+₹444.91 (0.24%) | L3 | Rejected-Finance L3 |
Tender Value
₹1.8 L
EMD Value
₹3,559
Closing Date
31 Jul 2026, 1:30 pmClosed
Executive Engineer (E/M), FAWS-II, EM SECTOR, KMDA
OFFICE OF THE EXECUTIVE ENGINEER FAWS-II, EM SECTOR, KMDA 83/1A, Vivekananda Road, Kolkata, 700006
Supply, Delivery and Laying of Al. Armoured Cable and associated works at Children park (PH No-04), Dumpimg Ground (P.H-03) and Raghunathpur(PH-01) DTW based pumping station under Rajarhat zone-II in FAWS scheme.
2026_KMDA_1032590_1
11/EE(E/M)/FAWS-II /T-03 of 2026-27 Dt.14.07.2026
Open Tender
Electrical Work/ Equipment
Percentage
7 days
Raghunathpur
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹3,559
OFFICE OF THE EXECUTIVE ENGINEER, EM, FAWS-II
14 Aug 2026
24 Jul 2026
3 Aug 2026
24 Jul 2026
31 Jul 2026
24 Jul 2026
29 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Withdrawing of 20HP submersible pump motor set for any length of pump assembly exceeding 18meter length from within tubewell housing pipe using all necessary tools and plants including transportation of submesrible pump motor and all other accessories and equipments from store to worksite as per direction of EIC. | - | Nos. | 4,213.1 | - |
| 2 | Installation of 20HP submerisble pump motor set for any length of pump assembly exceeding 18 meter length by using necessary requisite tools and plantes by lowering the same within the tubewell housing pipe by fitting fixing column pipes and other accessories, fixtures with necessary nuts, bolts and washer and suspending the entire assembly set vertically fixing the same supported by M.S clamps over the top of houysing pipe etc, including transportation of submersible pump motor and all other accessories and equipment from store to worksite as per direction of EIC. | - | Nos. | 4,677.98 | - |
| 3 | Supplying of following XLPE insulated aluminum conductor armored cables of 1.1kv grade as per is 7098 (part 1) 1988 with up to date amendments. (rate in rs. Per mtr).
3.5 core , 50 sq. mm. | - | RM | 593 | - |
| 4 | Laying of two cables above 35 sqmm and upto 185 sqmm in an
underground trench in single tier formation (horizontal), the trench
size : 680 mm x 760 mm average depth, with brick protection on
the top of each cable 8 (eight) Nos. bricks per Mtr. and 4 (four)
Nos. bricks per Mtr. as separator between the bricks and cables
and also trench to be filled up with shifted soil, levelling up and
restoring surface duly rammed | - | RM | 315 | - |
| 5 | Laying of cable from 3/3½ core 35 sqmm to 50 sqmm on
wall/surface incl. S & F MS saddles with earthing attachment in 2
x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending
good damages and painting. | - | RM | 71 | - |
| 6 | Supplying of following XLPE insulated aluminum conductor armored cables of 1.1kv grade as per is 7098 (part 1) 1988 with up to date amendments. (rate in rs. Per mtr).
3.5 core , 35 sq. mm. | - | RM | 448 | - |
| 7 | Laying of two cables upto 35 sqmm in an underground trench in single tier formation (horizontal), the trench size : 680 mm x 760mm average depth, with brick protection on the top of each cable 8 (eight) Nos. bricks per Mtr. and 4 (four) Nos. bricks per Mtr. as separator between the bricks and cables and also trench to be filled up with shifted soil, levelling up and restoring surface duly rammed . | - | RM | 301 | - |
| 8 | S & F of 100mm GI pipe (ISI-Medium) | - | Metre | 708.7 | - |
| 9 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below.
For 3½ core 35 sqmm . | - | Each | 162 | - |
| 10 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. For 3½ core 35 sqmm | - | Sets | 158 | - |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.07 MB
BOQ_2535844.xls
BOQ • 0.34 MB
Doc3_F2.pdf
Tender Documents • 1.10 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .