Providing & Fixing Furnitures

Name of Work :: Providing, Fixing & Supply Various Furniture in ITI

at Areri Ta.-Mahemdavad Dist-Kheda.

BILL OF QUANTITIES

Item Description of Item Quantity Unit Rate In figures Amount

No. (with brief specification and reference to book of

specifications)

[1] Providing and supplying 2-seater bench, (16 x 16 x 18 Inch) 30.000 Nos 8665.800

as per approved design and drawing, suitable for use in

institutional buildings, comprising seat and backrest made

of 18 mm thick good quality plywood of approved make,

conforming to relevant IS specifications, finished with

mm thick decorative laminate of approved shade and

make on exposed surfaces, with all edges neatly finished

with matching PVC/laminate edge banding. The bench

shall be supported on a sturdy frame made of M.S. square

hollow section (SHS) tubular steel, of suitable size and

thickness, fabricated by cutting, welding and grinding, with

all joints properly finished. The M.S. frame shall be treated

with one coat of suitable anti-corrosive primer and

finished with two coats of approved quality powder

coating/epoxy paint in approved colour. The complete

bench shall be rigid, level and stable, including all

necessary screws, bolts, nuts, brackets, welding, hardware,

fixtures, transportation, loading, unloading and installation

at site, complete in all respects as per the direction of

Engineer-in-Charge.

[2] Providing and supplying 3-seater plywood bench (Desk 42 60.000 Nos 12221.000

x 18 x 30 inch and seat 42 x 12 x 18 Inch)as per approved

design, drawing and sample, comprising seat, backrest and

front/side modesty panels made of 18 mm thick good

quality plywood of approved make, duly finished with

mm thick approved quality decorative laminate on

exposed surfaces and matching laminate/PVC edge

banding on all exposed edges. The seat and backrest shall

be securely fixed to a rigid framework fabricated from M.S.

square/rectangular hollow steel sections of suitable size

and thickness, including cutting, welding, grinding and

making all necessary joints. The complete M.S. framework

shall be treated with suitable anti-corrosive primer and

finished with two coats of approved quality synthetic

enamel paint/powder coating in approved shade. All

components shall be properly assembled and securely

fixed with necessary screws, bolts, nuts, washers, brackets

and other required hardware, ensuring a rigid, stable and

durable construction. The work shall include all materials,

labour, fabrication, welding, finishing, hardware,

transportation, loading, unloading and fixing/installation at

site, complete in all respects as per the design, drawings

and direction of the Engineer-in-Charge.

Item Description of Item Quantity Unit Rate In figures Amount

No. (with brief specification and reference to book of

specifications)

[3] Providing and supplying single-seater chair with writing 22.000 Nos 8332.500

pad,(Desk 60 x 18 x 30 Inch, Seat 60 x 12 x 18 Inch) as per

approved design, drawing and sample, comprising

ergonomically designed upholstered seat and backrest

with high-density polyurethane foam, covered with good

quality approved fabric/leatherette, supported on a sturdy

M.S. tubular/square section frame, duly welded, ground

and finished with suitable anti-corrosive primer and

approved quality powder coating. The chair shall be

provided with suitable armrests and a writing pad made of

18 mm thick good quality plywood/MDF, duly finished with

1.0 mm thick approved decorative laminate on exposed

surfaces with matching edge banding, securely fixed with

necessary brackets, fasteners and hardware. The writing

pad shall be of suitable size and foldable/swivelling type as

per approved design. The rate shall include all materials,

labour, fabrication, welding, upholstery, hardware,

finishing, transportation, loading, unloading and complete

installation, all complete as per approved design, drawing,

sample and direction of the Engineer-in-Charge.

[4] Blinds assemblies are to be supplied & installed in all 201.500 Sqmt 2684.580

windows with great precision. It should be water resitant

and fitted on alluminium headrails duly power coated and

fitted with stainless steel drive rods. Manual operated and

should have ISI mark.Providing & fixing roller type window

curtains of Deck, Aerolux, Siddhi or eq. make including

same brand channel - chain mechanism, synthetic black

out fabric of approved colour & design, silver coated

backside, same fabric plated pelmet etc. with all necessary

fittings etc. complete as per Architect/ Site engineer's

instructions as per sized specified in detail

drawings.Material selection should be as per engineer in

charge and chief architect.

[5] Providing & supplying Notice Board 5 feet x 3 feet Shutter 5.000 No 7777.000

Board with made from 8mm thick Water proof ply (M2)

base, including using woolen cloth on front, 0.8 mm Thk.

liner Laminate (M25) on back side Acrylic Cover Premium

Material Pin-up Board/Bulletin Board/Display Board for

institutional buildings (5x3 feet, Blue) with all materials &

labor etc. complete as per photograph and as per

instruction of architects and engineer in charge

Item Description of Item Quantity Unit Rate In figures Amount

No. (with brief specification and reference to book of

specifications)

[6] Providing & supplying Notice Board 5 feet x 4 feet Shutter 5.000 No 8332.500

Board with made from 8mm thick Water proof ply (M2)

base, including using woolen cloth on front, 0.8 mm Thk.

liner Laminate (M25) on back side Acrylic Cover Premium

Material Pin-up Board/Bulletin Board/Display Board for

institutional buildings (5x4 feet, Blue) with all materials &

labor etc. complete as per photograph and as per

instruction of architects and engineer in charge

[7] Providing , fixing & Arranging linear workstation as per 26.000 No 40652.500

drawing,framing the skeleton with 18mm + 18mm thick

vertical and horizontal plywood patti both side cover with

6mm thick plywood for grooving design and finishing with

seletced laminate 1.00mm thick.Before installation,make

hole/face plate for conduit pipes of eletcrical/networking

cables with openable stud from horizontal

partition.vertical support of 18mm + 18mm thick double

plywood cover with 1mm laminate finish including 18mm

thick curvica on exposed edges.Fitted 25mm thick (Partical

board,interior grade)post forming laminated top, fixed

with metal clamps including suspended metal keyboard-

mouse tray fixed with telescopic channel,cable manager

and separate drawer with lock,telescopic channel and

box,made from 18mm plywood with 1mm outside and

0.8mm inside laminate as well as 18mm post forming

outside of shutter with auto hinges of hafele or equivalent

for left or right side.Drawer run on Ebco make telescopic

channel with Godrej make lock with Two keys.Providing

and fixing of softboard(12mm thick)finished with tapestry

of good quality.partition hight 1200mm.Including all

materials and labour etc.Complete as per drawing and

instruction of engineer-in charge. W/S with MDU Size :-

[8] Podium Size :- 600mm x 450mm X 1200mm( H ) Providing 1.000 No 11985.880

and supply Podium Size made of 18mm thick plywood with

1mm Laminates finish with 2 mm PVC edge Beading finish,

Including all materials and labour etc. complete as per

detail drawing and instruction of engineer-in charge.

Item Description of Item Quantity Unit Rate In figures Amount

No. (with brief specification and reference to book of

specifications)

[9] Conference Table with Mic. (Modular design):- Providing 1.000 No 199980.000

and supplying Modular Conference table as per layout -

600 mm wide: made from two layers of Flat Laminated

Plywood Panels of 19mm TH Plywood (M1) structure

finished with 1mm TH decorative laminate(M24) sheet

approved by architect fixed with necessary fixtures and

fastening (Hardware) (M14) as per architect drawing. Top

portion of conference table all edges shall be covered with

required half round Teak wood beading Patti (M4) finished

with approved melamine polishing (M29) work. The table

shall also have provision for carrying wires & mounting

electrical plug point, switches & mic etc. Complete as

shown in architect drawing and as per instruction of

architect & engineer in charge.

Table Size: 90 x 60 x 75 cm (each module, total

modules) & 2 modules of 60cm radius quarter circles, as

shown in drawing.

[10] Providing and fixing 600mm x 450mm bevelled edge 6.000 No 833.730

mirrror of superior glass mounted on 6mm thick A.C. sheet

or plywood sheet and fixing to wooden pluge with C.P.

brass screws and washers.

[11] Staff - Table;- Providing and supplying Table made with 13.000 No 38885.000

19mm Thk. Plywood(M1) structure as per architect

drawing finished with 1.0 mm Thk. decorative

laminate(M24) on outside portion &0.8 mm Thk. liner

Laminate inside as specified & approved by architect with

fixed with necessary fixtures and fastening (Hardware)

(M14) as per architect drawing. Provide Plastic Computer

Desk Table Grommet Cable Wire Outlet Hole Cover 60mm,

Key-board trey, S.S. legs, Drawers with telescopic roller

channels (M15), Handle (M19) and locking (M16)

arrangements with all necessary fixtures and fastening

(M14). Provide Shutters as per drawing fixed with handle

(M19), hinges (M18), magnet (M14), complete with

bidding patties and all required hardware (M14).Provide

footrest as per drawing. All exposed edges shall be

covered with required Teak wood beading Patti (M4)

finished with approved melamine polishing (M29) work.

Complete as per architect's drawing and as per instruction

of architect & engineer in charge. Size as per (Refer

Item Description of Item Quantity Unit Rate In figures Amount

No. (with brief specification and reference to book of

specifications)

[12] Three seated sofas Providing and supplying sofa. (3 seated) 2.000 No 33330.000

made with using 19mm Thk. Plywood (M1) structure frame

with S.S. legs required necessary support fixed with

necessary fixtures and fastening (Hardware)(M14). It shall

be covered with 32 Density PU foam(M22) with required

Thickness as per design in seat & back and handle portion

this should be again covered with 14 mm thick PU

foam(M22) with Madarpat cover on it & upholstered

fabric(M26) or leather of suggested & approved by

architect finished with seat, back & all visible side as per

architect drawing. Complete as per architect's drawing and

as per instruction of architect & engineer in charge. (Refer

[13] Providing and fixing retro Reflective Hi Intensity Micro 1.000 Sqmt 7610.660

Prismatic Grade Board using 2mm Aluminum / 4mm ACP,

angle iron 75 x 75 x 6mm. Descaling and degreasing the

board as per requirement using epoxy reflactive process

by screen painting as directed etc. complete including

transporting and fixing in C.C. 1:2:4 with necessary

excavation curing etc. complete as per I.R.C. 67-2012

design. A warranty for 7 years for the Retro reflective

sheeting from original manufacturer & a certified copy of

year outdoor exposure test report from third party test lab

for the product offered shall be submitted by contractor.

(B)Class B Type- 4(MDR/ODR) retro reflective sheeting

[14] Providing, fabricating, supplying, and fixing in position a 54.000 Sqmt 5555.000

high-quality waterproof layout, display and Staff Deatil

board / schematic chart board, including Back Ligthing,

printing, mounting, framing, and installation complete as

per the approved layout plan and directions of the

Engineer-in-Charge.

[15] Providing & arranging Wheel chair for Physically 4.000 No 12857.810

Hanicapped person having. Dimension 790 (L) X 600 (W) X

70 (H)MM . WITH FOLDABLE FRAME Structure made of

carbon steel setction 22 x 1.2 mm. A3 carbon sheet with

crome finish cross bars made of A3 carbon Steel material

with setcion 25.4 x 1.2mm , 24 inch solid mag wheels with

alloy in the in the rim, hand rim of section 16 x 1.2 mm .

carbon steel with chrome finish, front wheel of 8 inch hub

made of PA polymer and outer side of solid rubber pu

moulded armrest & base made of abs , leather finish calf

rest and seat with cushion alumuinum footrest with with

updown movement having extended base footpress with

moulded plastic including handbrakes & full structure is

anti rust chrome finish with user capacity of 100kg.

Including all neccasary fixture, fatser,fittings, labours

materails machinary etc complete as selected and directed

by engineer incharge

Item Description of Item Quantity Unit Rate In figures Amount

No. (with brief specification and reference to book of

specifications)

[16] Providing and Arranging S.S Nickle Crome Plated Dustbin 12.000 No 1509.610

Having 254mm dia & 356mm Height with Perforted S.S

sheet Including all necessary Fixtures, Fasters, Labour

Materail Machinary etc. Complete as selected and directed

by Engineers Incharge. Approved make : SSHPB02 -

[17] Providing and supply slotted angel open rack made of 40 x 3.000 No 9047.140

40 x 2mm thick slotted angle having six shelves making five

compartment of 22 Gauge MS sheet with Finish epoxy

powder coated to the thickness of 50 microns. Including all

materials and labour etc.complete as per detail drawing

and instruction of engineer-in charge.

[18] Writing Board :- Providing, Supplying & fixing white board 18.000 No 14518.750

having size 180 x 120 cm including Aluminum frame,

including using 5mm thick Armstrong single piece

magnetic white board, including using 12mm plywood

sheets as supporting on walls, boxing to conceal

columns/beams as per plan, including fixing on wall with

all materials & labour etc. complete as per instruction of

architect & engineer in charge.

[19] Screen for Projector:- Providing and fixing Projector screen 4.000 No 12776.500

244 x 300 cm Ellore - Germany or Equivalent / Higher

make including white coloured blackout synthetic fabric,

necessary fittings, fastening needed wiring tools & Plants.

etc. completed including Tripot as directed by engineer in

[20] Providing and Arranging arylic work top with 10mm clear 1.000 No 7600.390

imported Acrylic sheet with two brass rods with height

adjustable of overall size 580 mm x 400 mm etc complete

as diretced by engineer incharge.Approved Make: scholar/

pearl/ alkonsign/ elora Acrylic Worktop

Item Description of Item Quantity Unit Rate In figures Amount

No. (with brief specification and reference to book of

specifications)

[21] Admin-Table:- Providing and supplying Table made with 4.000 No 52267.500

19mm Thk. Plywood(M1) structure as per architect

drawing finished with 1.0 mm Thk. decorative

laminate(M24) on outside portion &0.8 mm Thk. liner

Laminate inside as specified & approved by architect fixed

with necessary fixtures and fastening (Hardware) (M14) as

per architect drawing. Provide Plastic Computer Desk

Table Grommet Cable Wire Outlet Hole Cover 60mm, Key-

board trey, Soft-board, S.S. legs, Drawers with telescopic

roller channels (M15), Handle (M19) and locking (M16)

arrangements with all necessary fixtures and fastening

(M14). Provide Shutters as per drawing fixed with handle

(M19), hinges (M18), magnet (M14), complete with

bidding patties and all required hardware (M14). Provide

footrest as per drawing. All exposed edges shall be

covered with required Teak wood beading Patti (M4)

finished with approved melamine polishing (M29) work.

Complete as per architect's drawing and as per instruction

of architect & engineer in charge. (Refer drawing)

[22] Wooden cup boards with Glass :- Providing and supplying 8.000 No 29037.500

Full Height Storage, unit made with using 19mm Thk.

Plywood (M1) structure and finished with 1.0 mm Thk.

decorative laminate (M24) sheet on outside & and 0.8 mm

Thk. liner laminate (M25) on inside as specified / approved

by architect, fixed with necessary fixtures and fastening

(Hardware) (M14), as per architect drawing. The similar Ply

+ laminate made shutter shall have 6mm. thk. Glass, fixed

with required handle (M19), hinges (M18), magnet (M18)

& Locks (M16) complete with bidding patties (M4) and all

required hardware (M14). Ply shelves removable Type

supported on side teak wood (M5) battens on both sides.

All exposed edges shall be covered with 8 mm Thk. Teak

wood beading Patti (M4) finished with melamine polish

(M29). Complete or as directed as per architect drawing

and as per instruction of architect & engineer in charge.

(Size: 1200mm x 450mm x 2100mm)

[23] Providing and fixing 3-seater RCC outdoor garden bench 5.000 No 5226.750

with backrest, approximately 4 ft long and 1.5 ft seating

height, comprising precast RCC seat, backrest and side

supports/legs of approved design and dimensions, duly

finished smooth, painted with two coats of approved

exterior grade paint over suitable primer, complete in all

respects including transportation, loading, unloading,

positioning and fixing on prepared surface, as directed by

Engineer-in-Charge.

Item Description of Item Quantity Unit Rate In figures Amount

No. (with brief specification and reference to book of

specifications)

[24] Providing and supplying 12 ft height, 11-step, heavy-duty 1.000 No 26713.340

aluminium step ladder of approved make and model,

fabricated from high-strength aluminium sections, having

136 kg minimum load carrying capacity, with wide anti-slip

steps, non-slip rubber shoes, sturdy hinges and reinforced

side supports for safe and stable operation, complete in all

respects as directed by Engineer-in-Charge.

[25] Providing and supplying 10 ft height, 09-step, heavy-duty 1.000 No 24390.340

aluminium step ladder of approved make and model,

fabricated from high-strength aluminium sections, having

136 kg minimum load carrying capacity, with wide anti-slip

steps, non-slip rubber shoes, sturdy hinges and reinforced

side supports for safe and stable operation, complete in all

respects as directed by Engineer-in-Charge.

[26] Providing and supplying heavy-duty rolling 2.000 No 17249.440

garment/clothes rack of approved make, fabricated from

high-strength stainless steel/steel tubular sections,

approximately 55.5 inch long, with extended hanging rod,

bottom shelf and 360° smooth-rolling castor wheels,

having minimum load carrying capacity of 130 lb (approx.

59 kg), complete with all necessary fittings, supports and

accessories, duly finished and ready for use, as directed by

Engineer-in-Charge.

[27] Providing and fixing wooden classroom platform stage of 5.000 No 17422.500

approved size and design, constructed with 18 mm thick 7-

ply alternate plywood, including suitable supporting

framework, joints, screws, edge finishing and necessary

hardware, with top and exposed surfaces finished with

approved quality decorative laminate of selected colour,

complete in all respects as directed by Engineer-in-Charge.

[28] Providing and fixing Universal Heavy-Duty Projector Mount 5.000 No 4065.250

Assembly suitable for ceiling or wall mounting applications,

fabricated from commercial-grade alloy steel with a safe

load capacity of up to 15 kg, featuring a 3-in-1 installation

system (flush ceiling, telescoping arm, or wall bracket)

compatible with mounting hole spans up to 14.2 inches

(360 mm), complete with 15 tilt and rotational adjustment

mechanisms with no-slip locks, quick-release dismount

hooks, integrated internal square-tube cable management

for wire concealment, and all necessary metallic expansion

fasteners, anchor bolts, and accessories for rigid, vibration-

free fixing to concrete slabs or brick walls, all complete as

per site requirements, drawings, specifications, and

direction of the Engineer-in-Charge.

Item Description of Item Quantity Unit Rate In figures Amount

No. (with brief specification and reference to book of

specifications)

[29] Visitor’s group seating 5.000 No 11034.250

Providing Visitor’s group seating of three people made

from perforated S.S. CRC sheet (C-201), steel plate with

1.5mm thick. Bottom: made from 20mm x 40mm S.S. CRC

tubes as per sample finished with stainless steel chrome

plated as specified in specification sheet and as approved

by Engineer-in-charge.

[30] Visitor Chairs (M39) 15.000 No 4065.250

Providing and supplying Visitor or Guest chair the seat &

back are made of 12mm thick hot-pressed plywood

upholstered with changeable fabric upholstery covers (as

per requirement) and molded PU foam, together with

molded seat & back covers. The back foam should be

designed with contoured lumber support for extra

comfort. The size of chair 45cm x 38cm (Back side) and

45cm x 43cm (seat size). The PU foam should be molded

with density =45 ± 2 kg/m3. The armrests with Leg made

with Powder coated MS structure as per architect

selection. The Seat and back fixed with MS structure with

required necessary hardware.

[31] Centre Table/Corner Table/Tipoi 1.000 No 6969.000

Providing and supplying Centre Table/Corner Table/Tipoi

with Glass top made with 19mm Thk. Plywood (M1)

finished with 1.0 mm Thk. decorative laminate sheet (M24)

specified and approved by architect & fixed with necessary

fixtures and fastening (Hardware) (M14) inclusive of

approved melamine polishing (M29) work. Top part of

center Table covered with 8 mm Thk. toughened Glass

(M27) with Polished Edges. Complete as per architect's

drawing and as per instruction of architect & engineer in

charge. size as per (Refer drawing)

[32] Providing and supplying Lectern / Podium Stand fabricated 6.000 No 9872.750

with twin-pole MS tubular structure (25.4 mm dia. mild

steel pipes) and heavy-duty metal base, featuring a top

reading panel inclined at an angle of 45 for comfortable

reading/viewing, suitable for top panel dimensions of

approx. 41 cm x 122 cm or 61 cm x 91.5 cm , with overall

height ranging between 117 cm to 183 cm, complete with

anti-corrosive primer, premium smooth finish paint or

wooden polish/laminate coating, non-skid rubber pads,

structural welding, and all necessary fixings and

accessories, all complete as per approved design,

specifications, and directions of the Engineer-in-Charge.

Item Description of Item Quantity Unit Rate In figures Amount

No. (with brief specification and reference to book of

specifications)

[33] Low back revolving & tilting chair(M39):- Providing and 80.000 No 5226.750

supplying Law back chair for work center & other staff the

seat & back are made of Metal frame work. Upholstered

with changeable fabric upholstery covers (as per

requirement) and molded PU foam, together with molded

seat & back covers. The back foam should be designed

with contoured lumber support for extra comfort. Caster

of high durability & hydraulic. The chair should have

cylinder with 5 years warranty. The size of chair 45cm x

45cm (Back side) and 45cm x 43cm (seat size). The PU

foam should be molded with density =45 ± 2 kg/m3 with

One-piece armrests. The armrests are scratch and weather

resistant. The permanent contact mechanism is designed

with 360° revolving type, with pneumatic height

adjustment & 17° maximum tilt only & tilt tension

adjustment facility.

[34] Medium back revolving & tilting chair(M39) 22.000 No 7549.750

Providing and supplying Medium back chair with Metal

frame work. Upholstered with changeable fabric

upholstery covers (as per requirement) and molded PU

foam, together with molded seat & back covers. The back

foam should be designed with contoured lumber support

for extra comfort. Caster of high durability & hydraulic.

The chair should have cylinder with 5 years warranty. The

size of chair 47.5cm x 58cm (Back side) and 49cm x 48cm

(seat size). The PU foam should be molded with density

=45 ± 2 kg/m3. with One-piece armrests. The armrests are

scratch and weather resistant. The permanent contact

mechanism is designed with 360° revolving type, with

pneumatic height adjustment & 17 ° maximum tilt only &

tilt tension adjustment facility.

[35] High back revolving & tilting executive chair(M39) 1.000 No 14518.750

Providing and supplying High back chair with Metal frame

work. Upholstered with Artificial leather/Leatherette

and molded PU foam, together with molded seat & back

covers. The back foam should be designed with

contoured lumber support for extra comfort. Caster of

high durability & hydraulic. The chair should have

cylinder with 5 years warranty. The size of chair 53cm

x 79cm (Back side) and 51cm x 49cm (seat size). The

PU foam should be molded with density =45 ±

kg/m3. with One-piece armrests. The armrests are

scratch and weather resistant. The permanent contact

mechanism is designed with 360° revolving type, 12º

seat tilt 19° back tilt, Front pivot for tilt with feet resting on

ground ensuring more comfort, Tilt tension adjustment,

position locking with anti-shock back mechanism, which

should prevent the backrest from impacting the user when

the lock is released, static seat depth adjustment=0.5 cm

position locking.

Item Description of Item Quantity Unit Rate In figures Amount

No. (with brief specification and reference to book of

specifications)

[36] TWO SEATER SOFA SET-: Providing and supplying 2.000 No 23230.000

sofa(2seater) made with using 19mm Thk. Plywood

(M1) structure frame with S.S. legs required necessary

support fixed with necessary fixtures and fastening

(Hardware)(M14). It shall be covered with

Density PU foam(M22) with required Thickness as per

design in seat & back and handle portion this should be

again covered with 14 mm thick PU foam (M22) with

Madarpat cover on it & upholstered fabric(M26) or

leather of suggested & approved by architect finished

with seat, back & all visible side as per architect drawing.

Complete as per architect's drawing and as per

instruction of architect & engineer in charge. (Refer

I/ We am/are willing to carry out the work at___________________________________ % above / below percent

(should be written in figure & words) of the estimated mentioned above. Amount of my / our tender works out as

Estimated amount put to tender Estimated amount put to tender

Deduct____________% Below Deduct____________% Above

(* Please strike out whichever is not applicable).

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no

extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the

cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all

5. Credit of dismantled materials of amount of Rs.0.00 must be recovered from 1st R.A. bill of Contractor's.

6. All duties, taxes, and other levies except GST payable by the contractor under the contract, or for any other cause shall be included in

the rates, prices and total Bid Price submitted by the Bidder. (GST will be paid extra)

7. Payment will be given only if the material testing result is satisfactory.Testing of material shall be done as per

statement attached with specification.

Dated Signature of Deputy Executive Engineer Executive Engineer

the Contractor. (R & B) Sub-Division, (R&B) Division,