Renovation of Peepal Tree) (Tayala) in front of Temple Trust Shop for TTSNDJI, Distt. Bilaspur (H.P.)

Amount

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge. (a) R.C.C work

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge.(a) All kinds of soil

Brick work with common brunt clay F.P.S. (non Moular ) bricks of class designation 7.5 in foundation and plinth in :- In cement mortor 1:6 (one cement : six sand ) within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge. (a) Second class modular bricks

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge.: -- 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size.

Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for mass concrete within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge. (a) Mild steel and Medium Tensile steel bars (ISI make)

15 mm cement plaster on rough side of single or half brick wall of mix:- 1:6 (1 cement: 6 coarse sand) within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge.All work up to plinth level : -1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size)

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge. (a) Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye orequivalent.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge. (a) ISI make

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge. (a) 15 mm dia nominal bore Hissar Jindal B class make

(b) 20 mm dia nominal bore within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge. 15 mm dia nominal bore Hissar Jindal B class make

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge. (a) Sintex triple layer

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge.: (a) With common burnt clay F.P.S.(nonmodular) bricks of class designation 7.5

40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge..(a) Red sand stone

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge.

P/fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked i/c fixing with approved adhesive etc. complete.( Finolex or equivalent make.) within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge. (a) 110 mm dia pipes finolex make

Krishna Chand (BID ID -540750)

Biri Singh Govt Contractor (BID ID -540764)

Vijay Kumar (BID ID -540775)