CIVIL , ELECTRICAL, FIRE AND SAFETY, HVAC AND MISCELLANEOUS WORKS FOR NEW HEAD OFFICE BUILDING FOR MALABAR MILMA (MRCMPU LTD.)

Amount

CIVIL WORKS

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 150 m outside the periphery of the area cleared. ( DSR item code :2.31; lead shall be read as 150m)

FELLING TREES: Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 30 cm girth upto and including 60 cm girth. Lead upto 150m. ( DSR item code :2.33.1; lead shall be read as upto 150m)

Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 60 cm girth upto and including 120 cm girth. Lead upto 150m. ( DSR item code :2.33.2; lead shall be read as upto 150m)

Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 120 cm girth upto and including 240 cm girth. Lead upto 150m. ( DSR item code :2.33.3; lead shall be read as upto 150m)

Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Above 240 cm girth.Lead upto 150m. ( DSR item code :2.33.4; lead shall be read as upto 150m)

EARTH WORK : EXCAVATION UPTO 1.5m DEPTH: Excavation (manual / mechanical) in all types of soil, including murrum, for foundations of wall, columns, plinth beams, basement, raft, ducts, trenches, underground sumps, septic tanks, soak well, chambers, gully chambers, including shoring, strutting, bailing out water/pumping off water if required, removing and stacking simultaneously the excavated stuff any where within the site area complete as directed - From NGL to 1.5 m depth (Notes- Surplus excavated soil to be stacked within the plot at a distance not more than 150m and further used for plinth filling /road/land development etc with compaction/consolidation as directed by Engineer Incharge. Item rate is included loading,unloading , transportation etc., stacking at site as directed by Engineer-In charge and shall not be paid sepearately)(OD)

Excavation in all types of soil, including murrum, for foundations of wall, columns, plinth beams, basement, raft, ducts, trenches, underground sumps, septic tanks, soak well, manhole chambers, gully chambers, including shoring, strutting, bailing out water/pumping off water if required, , removing and stacking simultaneously the excavated stuff any where within the site area complete as directed - For depth exceeding 1.5 m but up to 3.0 m (Notes- Surplus excavated soil to be stacked in the plot. Item rate is included loading, unloading , transportation, stacking, etc., as directed by Engineer-In charge and shall not be paid sepearately. ) (OD)

EXCAVATION ORDINARY ROCK : Excavation in ordinary rock for foundations of wall, columns, plinth beams, basement, raft, ducts, trenches, underground sumps, septic tanks, soak well, manhole chambers, gully chambers, including shoring, strutting, bailing out water/pumping off water if required, removing and stacking simultaneously the excavated stuff any where within the site area complete as directed - From NGL up to 3m depth (Notes- Surplus excavated material shall be stacked any where in the plot within a distance of 150m can be further used for plinth filling /road/land development etc with compaction/consolidation as directed by Engineer Incharge. Item rate is included loading,unloading , transportation, stacking, etc., as directed by Engineer-In charge and shall not be paid sepearately)(OD)

EXCAVATION HARD ROCK (BLASTING PROHIBITED) : Excavation in hard rock for foundations of wall, columns, plinth beams, basement, raft, ducts, trenches, underground sumps, septic tanks, soak well, manhole chambers, gully chambers, including shoring, strutting, bailing out water/pumping off water if required, removing and stacking simultaneously the excavated stuff any where within the site area complete as directed - From NGL up to 3m depth (Notes- Surplus excavated material shall be stacked any where in the plot within a distance of 150m can be further used for plinth filling /road/land development etc with compaction/consolidation as directed by Engineer Incharge. Item rate is included loading,unloading , transportation, stacking, etc., as directed by Engineer-In charge and shall not be paid sepearately)(OD)

Providing and laying in position quarry muck as levelling coarse for road, Plinth filling, in mutilple layers of 600mm thickness including freight, transportation, loading, unloading, watering, ramming, consolidating with mechanical compactor / vibro roller / power roller of 8 to 12 MT, testing cost for suitability of earth/murrum & compaction of each layer,etc complete as directed. (Item rate is including loading, unloaidng , transportation and consolidation inposition etc.as directed by Engineer-In charge. Plinth filling , road, land development, etc.,) including cost and conveyance of all material labour charges,etc. complete as per direction by the Engineer in charge. (OD)

Providing and filling approved local sand (M-SAND) free from debris,pebbles etc in trenches, plinth, under sub base surrounding areas including screening, watering and consolidation, transportation, loading, unloading, spreading etc. complete as directed. (OD)

DR PACKING Under foundation - Dry stone packing under foundation with good quality blasted rubble including conveyance of material and labour charges etc. complete as per direction of departmental officers at site. (OD)

Providing and Laying Hardcore guage of aggregates exceeding 63mm but not exceeding 100 mm, deposited, spread gravel and levelled in layers not exceeding 20cm thick, watered and rammed to a true surface etc., complete all as specified and directed by Engineer in charge.(OD)

DEMOLISHING WORKS: Demolishing cement concrete manually / by mechanical means including disposal of material within 100 metres lead as per direction of Engineer - in-Charge. Nominal concrete 1:4:8 leaner mix ( including equivalent design mix) (( DSR item code :15.2.2)

Demolishing brick work / Laterite masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 100 metres lead as per direction of Engineer-in-Charge.In cement mortar ( DSR item code :15.7.4)

Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 100 metres lead as per direction of Engineer -in- Charges: In cement mortar ( DSR item code :15.9.2)

Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually / by mechanical means including stacking of serviceable and disposal of unserviceable material within 100 metres lead as per direction of Engineer-in-Charge: In cement mortar ( DSR item code :15.10.2)

Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 100 metres lead of : ( DSR item code :15.28.1)

Dismantling steel work in built up sections in angles, fencing, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 100 metres lead.( DSR item code :15.19)

CONCRETE WORKS: Providing and laying machine mixed plain cement concrete (PCC) 1:4:8 with 1 part of cement: 4 parts of coarse sand: 8 parts of stone aggregate of size 37 mm and downgraded for specified thickness including centring and shuttering if required, laying spreading, ramming, consolidating as per requirement and curing etc. complete as directed. ( DSR item code :4.1.8)

Providing and laying machine mixed plain cement concrete (PCC) 1:3:6 with 1 part of cement: 3 parts of coarse sand: 6 parts of stone aggregate of size 37 mm and downgraded for specified thickness, for foundations below walls, column footings, sunk floor terraces at any height above plinth level raft at any depth below floors, pavements roads, plinth protection, etc. including centring and shuttering if required, laying spreading, ramming, consolidating as per requirement and curing etc. complete as directed. (Notes- Stone aggregate 20 mm downside to be used instead of 37 mm, Elements in any shape, size, thickness or depth and also for columns in terrace for future expansion,Pipe casing,Screed etc.,. Item including shuttering at all heights. ) ( DSR item code :4.1.6)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level: 1:1.5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size ( DSR item code :5.1.2)

RCC: Providing and laying in position machine batched and machine mixed design mix M-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. Note:- Cement content for this item shall be minimum of 350 kg/cum. Excess or less cement used as per design mix will not be payable or recoverable separately. All work above plinth level upto floor V level ( DSR item code :50.5.33.2, cement content shall be read as per given spec.)

Providing and laying in position machine batched and machine mixed design mix M-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Note:- Cement content for this item shall be minimum of 350 kg/cum. Excess cement used as per the design mix will not be paid separately.<br>All work upto plinth level ( DSR item code :50.5.33.1, cement content shall be read as per given spec.)

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.(Note :- Cement content for this item shall be minimum of 370 kg/cum.Excess/less cement used as per design mix will not be payable/ recoverable separately) All works upto plinth level. ( DSR item code :5.33.1, cement content shall be read as per given spec.)

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.(Note :- Cement content considered in this item is @ 370 kg/cum. Excess/less cement used as per design mix will not be payable/recoverable separately) All works above plinth level upto floor V level( DSR item code : 5.33.2, cement content shall be read as per given spec.)

Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 420 kg/ cum. Excess cement used as per the design mix will not be paid separately.All work upto plinth level. (cement content shall be as per the given spec. All other spec. as per Item No.: DSR 16.43.1, )

Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content in this item shall be minimum of 420 kg/ cum. Excess cement used as per the design mix will not be paid separately.<br>All work above plinth level upto floor V level. (Level and cement content shall be as per the given spec. All other general spec. as per Item Sl. No.:30)

Providing R.C.C coping in M-20 for compound wall as per approved design and direction by the engineer in charge including cost and conveyance of all material labour charges,etc.complete. (OD)

Providing and laying in position machine batched and machine mixed design mix M-20 grade cement concrete for screed concrete work,which serves as a protecting coat for water proofing applied surfaces using cement content as per approved design mix,fine aggregate and coarse aggregate of 6mm/12 mm,add bonding agent SBR latex (Fosroc or equivalent) on the well prepared water proofed surface. (Rate inclusive of cost of Bonding agent) (OD)

FORM WORK: Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns (DSR item code : 5.9.1)

Centering and shuttering including strutting, propping etc. and removal of form work for Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc all works upto plinth lvl (DSR item code : 5.9.18)

Centering and shuttering including strutting, propping etc. and removal of form for Circular openings, cut outs, arches, etc. (less than 6m dia) (OD)

Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts (DSR item code : 5.9.6)

Centering and shuttering including strutting, propping etc. and removal of form work for : Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. ( ModifiedDSR item code : 5.9.2)

Centering and shuttering including strutting, propping etc. and removal of form work for Lintels, beams, plinth beams, girders, bressumers and cantilevers ( Modified DSR item code : 5.9.21)

Centering and shuttering including strutting, propping etc. and removal of form work for Suspended floors, roofs, landings, balconies and access platform ( Modified DSR item code : 5.9.3)

Centering and shuttering including strutting, propping etc. and removal of form work for stairs, (excluding landings) except spiral-staircases( Modified DSR item code : 5.9.7)

Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 4 m, for every additional height of 1 metre or part thereof (Plan area to be measured). Suspended floors, roofs, landing, beams and balconies (Plan area to be measured) (OD)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete for all heights. Thermo-Mechanically Treated bars of grade Fe-500 or more For all heights. (DSR code:5.22.6, Change : For all heights)

MASONRY WORKS: Providing and laying autoclaved aerated cement blocks masonry with 150mm/ 230mm/ 300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement if provided shall be made for seperately). ( DSR item code : 6.47.)

Solid block masonry using pre cast solid blocks ( factory made) of size 300x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete. ( DSR item code : 50.6.1.4)

Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure above plinth level up to floor V level thickness 20cm and above in: CM 1:6 ( 1 cement :6 coarse sand) etc complete ( DSR item code : 50.6.1.5.)

Extra for brick work/ AAC block masonry in super structure above floor V level, for each four floors or part thereof by mechanical means. ( DSR item code : 6.5.)

Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks above ground level up to floorV level in cement mortar 1:4 (1 cement :4 coarse sand). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work. ( DSR item code : 6.38, Change: Above ground instead of floor 2 level.) (Balipatanam bricks or equivalent)

Exposed brick masonry: Brick work with 1st class common burnt clay machine moulded modular bricks (Solid / Perforated) of class designation 12.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:4 (1 cement : 4 coarse sand) admixed with SBR latex. From ground level upto plinth level. ( DSR item code : 6.28.1, Change: cement mortar 1:4, admixed with SBR latex. Brick type- perforated) (Balipatanam bricks or equivalent)

Exposed brick masonry: Brick work with 1st class common burnt clay machine moulded modular bricks(perforated) of class designation 12.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:4 (1 cement : 4 coarse sand) admixed with SBR latex. Reinforcement shall be laid along 3rd course or as per the direction . All Above plinth level and upto floor V level. ( DSR item code : 6.28.2, Change: cement mortar 1:4, admixed with SBR latex. Brick type- 1st class, perforated & reinforcemnt ), Only Reinforcement will be paid seperately in the relevant item. (Balipatanam bricks or equivalent)

Exposed brick masonry: Brick work with 1st class common burnt clay machine moulded modular bricks(Solid ) of class designation 12.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:4 (1 cement : 4 coarse sand) admixed with SBR latex. Reinforcement shall be laid along 3rd course or as per the direction . All Above plinth level and upto floor V level. ( DSR item code : 6.28.2, Change: cement mortar 1:4, admixed with SBR latex. Brick type- solid & reinforcemnt ), Only Reinforcement will be paid seperately in the relevant item. (Balipatanam bricks or equivalent)

Providing and application of with white cement mortar 1:3 (1 white cement : 3 marble dust)Flush/ Ruled for pointing the exterior face of the joints in the exposed brick masonry (OD)

DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site ( DSR item code : 60.7.1)

Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto 2m above FFL. Cement mortar 1:6 (1 cement : 6 coarse sand). ( DSR item code : 7.8.2, change: above ground upto 2m above GL) ( DSR item code : 7.2.1, change: above ground upto 2m above GL) (Change: Upto 2m above GL)

Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor five level. Masonry work (second sort), in cement mortar 1:6 (1 cement : 6 coarse sand) ( DSR item code : 7.8.2, change: above ground upto 2m above GL)

Providing and fixing terracotta jali in cement mortar 1:3 (1 cement : 3 fine sand ) etc. complete excluding plastering of the jambs, sills and soffits. Aprox. 20x20cm size, 50-65 mm thick (As per approved pattern, make, design and drawings) (OD)

Honey-comb brick work 10/11.4 cm thick with common burnt clay bricks of class designation 7.5 in super structure above plinth level upto floor V level with cement mortar 1:4 (1 cement : 4 coarse sand). ( DSR item code : 6.23)

Laterite Masonry - Laterite masonry using neatly dressed stones of aprox. size 32x20x20cm in CM 1:6 including all cost of conveyance and labour charges etc. complete. ( DSR item code : 60.6.1)

Masonry work using departmental laterite stone in cement mortar 1:6 as per approved design and direction by the Engineer in charge,including cost and conveyance of all material,labour charges,etc. complete. (Old demolished laterites shall be cleaned and the debris shall be removed. materials for the cement mortar will be scope of the contractor) (OD)

FINISHING: Providing cement plastering of 12 mm cement plaster of mix 1:4 ( 1 cement : 4 fine sand) . (DSR item code - 13.1.1)

Providing cement plastering of 12 mm cement plaster of mix 1:4 ( 1 cement : 4 fine sand) with water proofing compound as per the manufacturers' instruction. (OD) (Ref. DSR item code - 13.1.1, water proofing compound additional)

9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete (Ref. DSR code : 13.16.1; read 9mm plastering instead of 6mm cement plastering) - ceiling plastering

Neat cement punning (DSR item code : 13.18)

Extra for plastering, painting, pointing, for all finishing works in exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof. (Single measurement for the finishing works at an area will be taken) (OD)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR item code : 13.8)

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : 13.48.1 Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm (DSR item code : 13.48.1) (Asian paints apcolite premium or equivalent)

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) (DSR item code : 13.47.1) (Asian paints ultima protec or equivalent)

Supplying and applying texture painting over finished wall as per the approved design and direction by the consultant in charge including cost and conveyance of all materils,labour,etc.complete (OD)

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. (on concrete / metal) (DSR item code: 13.52.2,13.52.1)

Providing and applying 1st quality Poly Urethane coating in two coats on new / old work at all heights below and above highest plinth level of approved make and desired shade including preparation of surface for painting, scaffolding , applying primer and putty etc as per manufacturers specification to give a even finish etc complete as directed. (Notes-Coating shall be 3 coat or more acheiveing uniform finish as directed by Engineer-In charge.)(OD)

Providing and applying exterior quality clear coat (2 or more coats) for exposed brick masonry over a priming coat with water repellant penetration coat as per direction by the Engineer in charge including cost and conveyance of all material laours,etc.complete (OD). The brick work shall be thoroughly cleaned and wiped before application of the coatings (Cera plus clear or equivalent with water repellant coat)

Supply and application of 1coat Epoxy Insulator, 2coats PU Sealer and 2 coat PU Exterior matt as per the manufacture recommendations for all the wooden Joinery as approved Drawings, specifications including all the labor materials scaffoldings etc. complete (Asian paints Woodtech or equivalent). (OD)

Supply and application of 1coat Epoxy Insulator, 2coats Melamine Sealer and 2 coat Melamine interior matt as per the manufacture recommendations for all the wooden Joinery as approved Drawings, specifications including all the labor materials scaffoldings etc. complete (Asian paints Woodtech) (OD)

FLOORING: Providing and laying vitrified matt floor tiles in different sizes (8-12mm thickness) with water absorption less than 0.08% and conforming to IS : 15622, of approved make with a basic project rate shall not be less than Rs.700/sqm in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand),including 4mm spacer joints and filled with epoxy tile joint filler etc., complete. Size of Tile 600 x 600 mm. The changes in basic rate of tile will be deducted. (General specifications : DSR item code: 11.47.2),( Changes : thickness, basic rate, joint filling) (OD)

Providing and laying full body vitrified matt floor tiles in different sizes (10-15mm thickness) with water absorption less than 0.08% and conforming to IS : 15622, of approved make with a basic price of not less than Rs.1000/sqm in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand),including 4mm spacer joints and filled with epoxy etc., complete.<br>Size of Tile 1200 x 600 mm. The changes in basic rate of tile will be deducted. (OD, Modified DSR item code: 11.49.2)

Skirting : Providing and laying full body Vitrified matt tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make with a basic project price not less than Rs.1000/sqm, in all colours & shade, in skirting, recessed into wall, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including 3mm spacer joints and filled with epoxy etc., complete. Size of Tile 1200 x 600 mm. The changes in basic rate of tile will be deducted. (OD, Modified DSR item code: 11.46.2)

Providing and laying vitrified matt floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make with a basic price of not less than Rs.600/sqm in all colours and shades Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive ( Water based) conforming to IS : 15477, in average 3 mm thickness, including 3mm spacer joints and filled with epoxy etc., complete.Size of Tile 600 x 600 mm. The changes in basic rate of tile will be deducted. (OD, Modified DSR item code: 11.49.2)

Providing and fixing vitrified glazed tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make with a basic price not less than Rs.500/sqm, in all colours, shades of any size as approved by Engineer -in-Charge, in skirting, over tile adhesive for wall tile fixing including 3 MM spacer and joints fill with epoxy of the same brand. The changes in basic rate of tile will be deducted. (OD)

Providing and laying full body vitrified matt step tiles in different sizes (thickness minimum 12mm) with water absorption less than 0.08% and conforming to IS : 15622, of approved makewith a basic price of not less than Rs.1000/sqm in all colours and shades Fixing glazed/ Ceramic/ Vitrified floor tiles with cement bed of 20mm thickness over cement grout , in average 3 mm thickness, including 3mm spacer joints and filled with epoxy etc., complete. The changes in basic rate of tile will be deducted. (OD)

Providing and laying LEPPATO FINISH FLAMED Granite stone laying in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average)thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Architect. (OD)

Providing half round/ bevelled edge mould for granite works as per the direction by the Engineer in charge including cost and conveyance of all materials, labour charges, etc. complete (OD)

Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shadeArea of slab upto 0.50 sqm (DSR item code : 8.2.1.2)

Providing and laying FLAMED FINISHED Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) and jointed with cement slurry or Granite fixing adhesives laid and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Architect. (OD)

JOINERIES: Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1 mm), with wall thickness 2.0mm (±0.2 mm), corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 x 19 mm and 1 mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer's specification and direction of Engineer-in-chargeExtruded section profile size 48x40 mm. (Saint gobain/ Fenesta) DSR item code : 9.117.1

Providing and fixing to existing door frames30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer in-charge. (DSR item code : 9.118.2)

Providing and fixing to existing door frames30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness.Half of the panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers and half of filled with 6mm toughened glass,etc.complete as per manufacturer's specification and direction of Engineer in-charge. (OD)

Providing and fixing factory made uPVC white colour sliding glazed door with 6mm toughened glass comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge .Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Two track two panels sliding door made of (big series) frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 +/- 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto5.00 sqm)(OD)

Providing and fixing factory made uPVC white colour shutter with fixed louvers. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (modified DSR code: 9.147F.1)

Providing and fixing removable/hinged fly proof mesh/screen made of powder coated aluminium extruded sections minimum weight 0.200kg/m for fly screen shutter frames fixed to basic frame work. The fly proof stainless steel 304 grade wire gauge with average width of aperture 1.4mm in both directions and wire of diameter 0.5mm shall be fixed to the shutter frame using EPDM/Neoprene gasket including screws, hinges, fastners, nuts, bolts etc. complete. (Area of opening for fixing the flyproof shutter shall be measured in sqm for payment. The cost of basic frame work shall be paid under relevant item.) (OD)

Providing wood (carpentry)work for doors, windows, frmaes, etc. and fixed in position with necessary fittings and fixtures. (with departmental wood, the fittings such as hinges, tower bolt, handles, locks, etc. will be supplied by MRCMPU)

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width form 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. (OD)

Providing and fixing fire resistant door frame of section 143x57 mm having built in rebate made out of 16 SWG G.I. sheet ( zinc coating not less than 120 gm/ sqm) duly filled with vermuculite based concrete mix, suitable for mounting 60 minutes fire rated door shutters. The frame is fitted with intumuscent fire seal strip of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer -in-charge (Dash fastener to be paid for separately ). (DSR Item code: 9.36) (ileaf or equivalent)

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single glass panes, wire mesh and silicon sealent are inclusive) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) (OD)

Supplying and installation of 10mm laminated glass with White coloured UPVC frames of required size including all the accessories,cost and conveyance of all materials,lobour ,etc.complete as per the approved design anddirection by the Engineer in -charge. (OD)

Providing and fixing louveres made of powder coated aluminium extruded louver profiles (min 0.400 kg/m) fixed to basic partition frame work including fastners, screws etc. complete. (Area of opening for fixing louvers shall be measured in sqm for payment. The basic partition frame work shall be paid under relevant item.) (OD)

Providing and fixing powder coated GI louveres made of thickness not less than 0.5mm fixed to basic partition frame work including fastners, screws etc. complete. (Area of opening for fixing louvers shall be measured in sqm for payment. The basic partition frame work shall be paid under relevant item.) (OD)

Providing and fixing structural glazing using powder coated aluminium extruded architectural sections of size 71.2x28x2.8mm(1.136kg/m) to form grids of size maximum of 600x750mm and fixing 8mm thick approved plain/reflective type glass(Saint gobain or equivalent). Securely fixing the basic frame work on to the masonry/RCC/MS structure or any part of the building with adequate and properly designed anchor fastners, fischer/hilty make nuts and bolts etc including providing himax windows in required intervals (minimum 1 number per 3m). complete. as per the drawings/directions of engineer in charge and specificaitons. (Cost inclusive of aluminium, Glass, fittings, etc. )

Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment. (for all height, scaffolding inclusive) (OD)

Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. (OD)

Providing and fixing premium quality aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately):Polyester powder coated aluminium (minimum thickness of powder coating 50 micron) (DSR code: 21.1.1.2)

For shutters of doors, windows & ventilators including providing and fixing premium quality hinges/ pivots and making provision for fixing of fittings wherever required as per the drawings. (DSR code: 21.1.2.2)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness. (DSR code: 21.3.2)

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With brass cover plate minimum 1.25 mm thickness. (DSR code: 21.4.2)

Supplying and installation of 16 mm laminated glass of 2.1 m dia. for circular opening as per approved design and drawings ,including cost and conveyance of all material labour cherges,etc. complete. (OD)

Providing and fixing hydraulic floor spring (hydraulic door closer) weight upto 8kg of approved make (Dorma) and quality / model including cutting the floor, fixing and re-finishing the surrounding to match with floor etc complete as directed . (OD)

Providing and fixing frameless glass doors made from 12mm thick fully toughened glass with patch fittings of stainless steel – 304 such as top pivot, top patch, bottom patch, corner lock cum lock keeper plate and floor springs of approved make (Dorma) including SS-304 pull handles 600 mm long etc complete as directed. ( DSR item code : 21.18, modified)

STEEL WORKS : Steel work in MS tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a applying two coats of epoxy paint over two coats of epoxy primer, including welding and bolted with special shaped washers etc. complete. In frames, guard bar, ladder, hand rails, railings, brackets, grills, gate and similar works. (modified DSR code: 10.25.2)

Steel work welded in MS sections framed work, including cutting, hoisting, fixing in position and applying two coats of epoxy paint over two coats of epoxy primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, hand rails, railings, brackets, grills, gate and similar works. (modified DSR item code10.25.2)

Steel work with G I pipes/ hollow sections including cutting, hoisting, fixing in position and welding and applying two coats of epoxy paint over two coats of epoxy primer, including welding and bolted with special shaped washers etc. complete - for frames grills, gates, fencing, etc. (OD)

Steel work welded in departmental MS sections/ framed work, including cleaning, removal of old paint, cutting, hoisting, fixing in position and re- applying two coats of epoxy paint over two coats of epoxy primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, grills and similar works (OD)

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) (OD)

Providing and fixing M.S plates, channels or angles of specified size and thickness welded to reinforcement steel and embedded in concrete in line and level as per the direction of Engineer in charge. (OD)

Providing and fixing MS round holding down bolts/ foundation bolts etc of specified size and diameter with nuts, washer complete as per the direction of Engineer in charge. (OD

Supplying and fixing rolling shutters of approved make, made of required size Powder coated (Minimum 50micron) GI perforated flats, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and G.I. top cover of required thickness for rolling shutters. 80x1.25 mm GI flats with 1.25 mm thick top cover. Including supply and fixing of Providing and fixing ball bearings and all other fittings complete (OD)

Providing, and fixing fittings for gates and doors such as pivots, rollers, hinges, MS solid shafts, MS fixing holdfasts to be grouted in concrete column / block, providing and fixing nuts bots fasteners as required, rail track if required, as per architect’s details, providing closing / locking arrangements, including painting with two or more coats of Epoxy paint over two coats of epoxy primer(MRF) complete as directed. (OD)

Providing and fixing CI gratings made of flat steel panel and supporting bars welded together with setting spacings. It goes through cutting, opening, edging and other processes. The vertical bar grating spacing is 30mm, 40mm or 60mm, horizontal bar grating is 50mm or 100mm . Surface Treatment: hot-dipped galvanized or electro galvanized mild steel. The products enjoy the features of high strength, light structure, high bearing, convenience for loading and other properties. (OD)

Supplying and fixing C.I manhole covers of approved make, required shape, size, weight, etc. with frame (OD)

ROAD WORK: Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres. (DSR item code : 16.1)

Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads &amp; lifts, spreading in uniform layers of specified thickness on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.&lt;br&gt;With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR&lt;br&gt;Value-25. (modified DSR code: 16.78.2, change: motor grader not required)

Providing and laying 100 mm thick factory made cement concrete interlocking paver block of M - 40 grade made by block making machine with strong vibratory compaction, of approved size, design &amp; shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand/6mm aggregates, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (OD)

Providing and laying Vacuum De-watered of M25 grade concrete with minimum cement content of 370kg/cum, surface vibrated and finished with machine for flooring over prepared sub-base in strips of width up to 3.5 M in line and level maintaining required slope , compacting with needle / surface vibrator, leveling with surface vibrator, Vacuum De-watering with vacuum pump, floating and further compaction with skin floater equipped with floating disc, providing and spreading approved floor hardener @ 3.5 Kg/Sq.M, curing, formation of joints @ 4 M c/c (maximum) by cutting up to 25mm thickness of concrete slab with mechanized saw and filling the same with semi-rigid sealant including preparation of base, curing finishing etc. complete as per the drawing / as directed by Engineer. ( Note : Excluding reinforcement steel) (OD)

Providing and laying heavy duty exterior vitrified paving tiles in different sizes (thickness not less than 10mm) with water absorption less than 0.08% and conforming to IS : 15622, of approved makewith a basic project rate not less than Rs.680/sqm in all colours, patterns and shades laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 400 x 400 mm or 500x500mm. (OD)

ROOFING: Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on R.C.C slab work complete including laying of cement mortar 1:4 for horizontal bands over the slab. (OD)

Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20mm thickness and of approved pattern on R.C.C work complete. (OD)

Providing and fixing Rain water gutter (FRP) of superior quality and of size 25 cm in depth and 20 cm in width including all necessary accessories/ clamps/ joints/stop ends etc. for the smooth installation of the same. Colour shall be as per direction of Engineer - in Charge. The clamps shall not be visible in face. (OD)

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (DSR item code : 12.5)

WATER PROOFING WORK: Providing and applying integral crystalline slurry of hydrophilic in nature for water proofing treatment to the RCC structures like retaining walls of the basement,water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 partsintegral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 partsintegral crystalline slurry : 1 part water) for horizontal surfaces and applying thesame from negative (internal) side with the help of synthetic fiber brush. The materialshall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as perDIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystallineslurry shall be capable of self-healing of cracks up to a width of 0.50mm. The workshall be carried out all complete as per specification and the direction of the engineerin-charge. The product performance shall carry guarantee for 10 years against any leakage. For horizontal surface two coats @ 1.1 kg per sqm (DSR item code : 22.23.1)

WATER PROOFING WORK: Providing and applying water proofing treatment with two component cementitious flexible polymer based water proofing system to the RCC structures like retaining walls of the basement,water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/ subway and bridge deck etc., The workshall be carried out all complete as per specification and the direction of the engineerin-charge. The product performance shall carry guarantee for 10 years against any leakage. For horizontal surface two coats @ 1.1 kg per sqm (OD)

Providing and Placing in position suitable PVC water stops conforming to IS : 12200 for construction / expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete:Serrated with central bulb ( 225 mm wide, 8-11 mm thick) (FOSROC) (DSR item code : 22.4.1)

Supplying and mixing with cement for cement concrete/cement mortar, integral water proofing compound approved make & quality as per the requirements and manufacturer’s specifications etc. complete as directed. (OD)

Providing and Grouting the foundation bolts/pockets, base plates with ACC Shrinkkomp grade-2/ GP2 of FOSROC or FLOWGROUT 60 of FAIRMATE ready mixed non shrink, free flow, self levelling, cementitious grout making holes if necessary in concrete, curing etc. as per the recommendations of the manufacturer, complete as directed. (Notes-Item also included grouting of pipes in masonry or concrete elements, grouting of holdfasts etc.,) (OD)

Providing and filling Silicon sealant of approved make and grade in the construction/ expansion joints including cleaning the joint providing primer etc. as per specifications of the manufacturer and sealing/ finishing etc for size 10 mm wide x 6 to 8mm deep , complete as directed. (OD)

Providing and laying Silicon sealant (GE,DOW CORNING or equivalent approved) to expansion joint, grooves etc. including providing and fixing backer rod and masking tape as per manufacturers specification or as directed by the engineer in charge complete (25 mm wide and 12 mm deep) (OD)

MISCELLANEOUS: Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand) including testing of joints etc. complete:150 mm dia R.C.C. pipe (DSR item code : 19.6.2)

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand) including testing of joints etc. complete:300 mm dia R.C.C. pipe (DSR item code : 19.6.5)

Providing and Fixing of reinforcement steel dowel bar in the existing RCC elements by re-bar method including machine drilling (minimum drilling hole dia. shall be 1.5 times of the dia. of dowel bar to be inserted and up to suitable inset depth as directed), supply of necessary anchoring chemicals such as epoxy based resin and hardener of approved make like HILTI India or equivalent approved and work to be carried through the competent agency including all materials, labours, tools, etc complete as directed for 8 mm dia bars. (Reinforcement shall be paid under relevant item of this tender), complete as directed. (Notes-Item only for rebarring with bonding chemical.) (OD)

Providing and Fixing of reinforcement steel dowel bar in the existing RCC elements by re-bar method including machine drilling (minimum drilling hole dia. shall be 1.5 times of the dia. of dowel bar to be inserted and up to suitable inset depth as directed), supply of necessary anchoring chemicals such as epoxy based resin and hardener of approved make like HILTI India or equivalent approved and work to be carried through the competent agency including all materials, labours, tools, etc complete as directed for 10 mm dia bars. (Reinforcement shall be paid under relevant item of this tender), complete as directed. (Notes-Item only for rebarring with bonding chemical.) (OD)

Providing and Fixing of reinforcement steel dowel bar in the existing RCC elements by re-bar method including machine drilling (minimum drilling hole dia. shall be 1.5 times of the dia. of dowel bar to be inserted and up to suitable inset depth as directed), supply of necessary anchoring chemicals such as epoxy based resin and hardener of approved make like HILTI India or equivalent approved and work to be carried through the competent agency including all materials, labours, tools, etc complete as directed for 12 mm dia bars. (Reinforcement shall be paid under relevant item of this tender), complete as directed. (Notes-Item only for rebarring with bonding chemical.) (OD)

Providing and Fixing of reinforcement steel dowel bar in the existing RCC elements by re-bar method including machine drilling (minimum drilling hole dia. shall be 1.5 times of the dia. of dowel bar to be inserted and up to suitable inset depth as directed), supply of necessary anchoring chemicals such as epoxy based resin and hardener of approved make like HILTI India or equivalent approved and work to be carried through the competent agency including all materials, labours, tools, etc complete as directed for 16 mm dia bars. (Reinforcement shall be paid under relevant item of this tender), complete as directed. (Notes-Item only for rebarring with bonding chemical.) (OD)

Providing and Fixing of reinforcement steel dowel bar in the existing RCC elements by re-bar method including machine drilling (minimum drilling hole dia. shall be 1.5 times of the dia. of dowel bar to be inserted and up to suitable inset depth as directed), supply of necessary anchoring chemicals such as epoxy based resin and hardener of approved make like HILTI India or equivalent approved and work to be carried through the competent agency including all materials, labours, tools, etc complete as directed for 20 mm dia bars. (Reinforcement shall be paid under relevant item of this tender), complete as directed. (Notes-Item only for rebarring with bonding chemical.) (OD)

Providing and Fixing of reinforcement steel dowel bar in the existing RCC elements by re-bar method including machine drilling (minimum drilling hole dia. shall be 1.5 times of the dia. of dowel bar to be inserted and up to suitable inset depth as directed), supply of necessary anchoring chemicals such as epoxy based resin and hardener of approved make like HILTI India or equivalent approved and work to be carried through the competent agency including all materials, labours, tools, etc complete as directed for 25 mm dia bars. (Reinforcement shall be paid under relevant item of this tender), complete as directed. (Notes-Item only for rebarring with bonding chemical.) (OD)

Providing and fixing Anchor Fastener approved make including drilling of hole in frame, concrete/ masonry etc. complete as per manufacturers specification & direction of Engineer In-charge for 10 -12mm Dia (OD)

Providing and fixing Anchor Fastener approved make including drilling of hole in frame, concrete/ masonry etc. complete as per manufacturers specification & direction of Engineer In-charge for 16-20 mm Dia (OD)

PEST CONTROLL TREATMENT: Supplying the chemicals & carrying out pre-construction Anti-termite treatment (IS 6131 part 2) with Bayer make Imidacloprid 30.50SC with 0.075% concentration (IS 15443) at the various stages of construction in stages and as recommended by the chemical manufacturer to safeguard the building against termite including execution and submission of guarantee for a period of 10 years against any subterranean pests infestation. This work is to be got executed through an approved specialized agency as per their specifications. (Measurement shall be as per out to out plan dimension in SqM at plinth level of the building treated). Stages of treatment:- A). Treatment for RCC foundations and basement :- After the backfilling up to GL, the peripheral walls shall be treated at its both side up to 500mm depth at the rate of 7.5 Ltr/SqM. B). Treatment at the junction of the wall and floor (filling). :- After the plinth filling is completed, both the sides of the walls at the junction of the wall and filling to be treated at the rate of 7.5 Ltr/SqM. C). Floor treatment :- The top surface of the consolidated earth within plinth walls shall be treated with Chemical emulsion at the rate of 5 Ltr / SqM. D). Treatment of soil along the perimeter of building. :- After the building is complete, the earth along the external perimeter of the building shall be treated for a depth of minimum 300mm & width upto 750mm with Chemical emulsion at the rate of 7.5 Ltr/SqM. E). Treatment of Soil surrounding Pipes, Wastes and Conduits and any other service line going inside the building. (Technical specification available in bid document ) (OD)

Charges for cutting core (hole of specified diameter) in RCC beams having thickness more than 450mm wide using coring machine diamond core bit by drilling hole through reinforced cement concrete beams and its reinforcement bars of any diameter and at all levels below and above plinth level including scaffolding/staging and working platform, cleaning debris etc complete as directed - For 50-100mm nominal bore (dia) The inside of the hole shall be finished with cement plastr and paint as per the instruction of engineer in charge. (OD)

Charges for cutting core (hole of specified diameter) in RCC beams having thickness more than 450mm wide using coring machine diamond core bit by drilling hole through reinforced cement concrete beams and its reinforcement bars of any diameter and at all levels below and above plinth level including scaffolding/staging and working platform, cleaning debris etc complete as directed - For 110mm-160 nominal bore (dia) The inside of the hole shall be finished with cement plastr and paint as per the instruction of engineer in charge. (Notes- Depth upto 450 mm and diameter of bore 110 to 160 mm) (OD)

Charges for making holes in brick walls with or without plaster / tiles with mechanical cutter like HILTI etc. including disposing the debris and finishing the same as per requirements. Measurement of holes will be taken per no. of holes drilled as per following range of diameters. Making of holes by hammer and chisel will not be considered in this item. For Diameter of holes upto 151 mm to 300 mm clear. The inside of the hole shall be finished with cement plastr and paint as per the instruction of engineer in charge. (OD)

Providing and making Core Cutting in R.C.C elements of any thickness from 201 to 450mm deep bore using core cutter machines and tools etc complete as directed. For 50mm dia.

Providing and making Core Cutting in R.C.C elements of any thickness up to 200mm deep bore using core cutter machines and tools etc complete as directed. 100mm dia

Providing & constructing 230mm thick random rubble pitching un-coursed, of granite or approved quality quarry dressed stones in cement mortar 1:6 (1 part of cement:6 part of coarse sand) in jointing / pointing, including dressing, breaking the clods if any, uniformly levelling the slope , ramming & watering the subgrade, wetting the stones before use, hammering down with wooden mallet for positioning the stones uniformly, forming face joints not more than 25mm thick, racking of joints up to 20mm deep during construction for the purpose of plastering / pointing , curing for 10 days etc., all complete as per drawing and direction of EIC. In foundation at all levels below and up to highest plinth level. (OD)

Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. SBR Polymer (@10% of cement weight) modified cementitious bond coat @2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer. (DSR item code : 26.31.1)

Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make. (DSR item code : 26.31.2)

Supplying of standard quality GFRG panel of 124 mm thickness with modular cavities purchased from GFRG panel manufacturing plant in the country, cut to required wall sizes and floor/ roof slab sizes in correct length and height, including cutting of door, window and ventilator opening as per the cutting drawing prepared by architects / design engineers for the construction of GFRG building and loaded in stillages for transportation to the construction site. Cost of panel includes security deposits, hire charges of stillages & jaws, cost of transportation in trucks/ lorries without any damages upto 300kms including all leads and lifts from GFRG manufacturing plant to construction site and unloading at site using suitable fork lift/ crane. (Payment shall be made on the basis of area of one side of panel without reduction of opening of door/ window / ventilator). For transportation above 300kms, additional charges to be paid. (DSR item code : 26.51)

Providing and fixing in position pre- moulded joint filler (20-40mmthick) in expansion joints. (Modified DSR code : 16.45, change - thickness, UoM)

Providing and fixing of expansion joint system related with wall joint (internal/ external) location as per drawings and direction of Engineer-In-Charge. The joints shall be of extruded aluminum base members, self aligning / centering arrangement and support plates as per ASTM B221-02. The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063). Wall Joint of 100-140mm gap. (DSR item code : 5.45.1)

Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members with, self aligning and self centering arragement support plates asper ASTM B221-02. The system shall be such that it provides watertight roof to roof/roof to corner joint cover expansion control system that is capable of accommodating multidirectional seismic movement without stress to its components. System shall consist of metal profile that incorporates a universal aluminum base member designed to accommodate various project conditions and roof treatments. The cover plate shall be designed of width and thickness required to satisfy movement and loading requirements and secured to base members by utilizing manufacturer?s preengineered self-centering arrangement that freely rotates / moves in all directions. The Self centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. Material shall confirm to ASTM 6063. Joint of 100-140 mm gap. (DSR item code : 5.46.1)

PLUMBING WORKS

Supply and Installation of wall Mount European water closet with P-Trap and concealed cistern conforming to IS2556 Vitreous, Glazed,white Color, with PVC Seat cover with CP Brass Screws & Nuts conforming to IS 2548-1967 with Accessories, 15mm dia flexible water inlet pipe, 32mm dia PVC flush pipe, Connection to the Soil Line, Core Cutting, refinishing etc. complete as per building norms. (Jaquar SLS-WHT-6951 or equivallant)

Supply and Installation of wall Mount Disabled European water closet with P-Trap and concealed cistern conforming to IS2556 Vitreous, Glazed,white Color, with PVC Seat cover with CP Brass Screws & Nuts conforming to IS 2548-1967 with Accessories, 15mm dia flexible water inlet pipe, 32mm dia PVC flush pipe, Connection to the Soil Line, Core Cutting, refinishing etc. complete as per building norms. (Jaquar : DIS WHT 93955P180UF or equivalent)

Supply and Installation of Floor Mount/Pedastal Type European water closet with P-Trap and concealed cistern conforming to IS2556 Vitreous, Glazed,white Color, with PVC Seat cover with CP Brass Screws & Nuts conforming to IS 2548-1967 with Accessories, 15mm dia flexible water inlet pipe, 32mm dia PVC flush pipe, Connection to the Soil Line, Core Cutting, refinishing etc. complete as per building norms.

Supply and Installation of Actuator plate including cost of materials and labour charges etc complete.( Jaquar JCP-CHR-152415 or equivalent)

Supply and Installation of Concealed cistern including cost of materials and labour charges etc complete.(Jaquar JCS-WHT-2400 or equivalent)

Supply and Installation of conter bottom wash basin with half pedestal Vitreous, Glazed,white Color, with CP Brass Screws & Nuts conforming to IS 2548-1967 15mm dia flexible water inlet pipe, 32mm dia PVC Extension pipe and Flange, CP SS Standard waste coupling,wall chasing, refinishing etc. (Jaquar OPS-WHT-15801 or equivalent)

Supply and Installation of counter top wash basin Vitreous, Glazed,white Color, with CP Brass Screws & Nuts conforming to IS 2548-1967 15mm dia flexible water inlet pipe, 32mm dia PVC Extension pipe and Flange, CP SS Standard waste coupling,wall chasing, refinishing etc. (Jaquar/Kohler)

Supply and Installation of Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink with drain board 510x1040 mm bowl depth 250 mm (Nirali or equivalent)

Providing and fixing 450mm wide 900mm height urinal partition with 8mm thick frosted glass including fittings (Jaquar JSE-CHR-810US450X or equivalent)

Supply and installation of auto closing concealed urinal flush valve including cutting and making good the wall whrerever required. (Jaquar PRS-CHR-073 or equivalent)

Supply and Installation of Angle Cock including cost of materials and labour charges etc complete.(Jaquar FUS-29053 or equivalent)

Supply and Installation of Health Faucet including cost of materials and labour charges etc complete.(Jaquar ALD-565 or equivalent)

Supply and Installation of Grab Bar including cost of materials and labour charges etc complete.(Jaquar WAC SAP BR0600CS or equivalent)

Supply and Installation of Pillar cock including cost of materials and labour charges etc complete.(Jaquar FUS-29001 or equivalent)

Supply and Installation of Sink Fauset including cost of materials and labour charges etc complete.(Jaquar ARI-CHR-39347 or equivalent)

Supply and Labour for Installation of CP Brass Overhead Shower / Shower panels (Jaquar:OHS-CHR-1665 or equivallant) with Shower Arm, Shower Head, Diverter both concealed and exposed part(Jaquar:FUS CHR 29421 or equivallant), spout (Jaquar: SPJ CHR 429PM or equivalent) complete with Supporting Accessories,wall chasing, refinishing etc as per building norms.

Supply and Labour for Installation at site respective dia C.P brass Concealed and Exposed part of Stop Cock including cutting and making good the wall wherever required (for drinking water/ cooler/water-filtering units etc) : 20mm Stop Cock (Jaquar Stopcock-Fus-29083k & Allied-Ald089 or equivallant)

Supply and Labour for Installation of site 15mm dia C.P brass long body Bib tap with wall flange including cutting and making good the wall wherever required (Jaquar ARI-39037 or equivallant)

Supply and Labour for Installation,testing and commission of brass ball valves with test pressure of Shell 25kg/cm²g and seat 16kg/cm²g stated as follows with all supports, fixing and fitting all as specified and complying to relevent standards.: 20mm dia (L&T or equivallant)

Supply and Labour for Installation,testing and commission of brass ball valves with test pressure of Shell 25kg/cm²g and seat 16kg/cm²g stated as follows with all supports, fixing and fitting all as specified and complying to relevent standards.: 25mm dia (L&T or equivallant)

Supply and Labour for Installation,testing and commission of brass ball valves with test pressure of Shell 25kg/cm²g and seat 16kg/cm²g stated as follows with all supports, fixing and fitting all as specified and complying to relevent standards.: 32mm dia (L&T or equivallant)

Supply and Labour for Installation,testing and commission of brass ball valves with test pressure of Shell 25kg/cm²g and seat 16kg/cm²g stated as follows with all supports, fixing and fitting all as specified and complying to relevent standards.: 40 mm dia (L&T or equivallant)

Supply and Labour for Installation,testing and commission of brass ball valves with test pressure of Shell 25kg/cm²g and seat 16kg/cm²g stated as follows with all supports, fixing and fitting all as specified and complying to relevent standards.: 50mm dia (L&T or equivallant)

Supply and Labour for Installation,testing and commission of brass ball valves with test pressure of Shell 25kg/cm²g and seat 16kg/cm²g stated as follows with all supports, fixing and fitting all as specified and complying to relevent standards.: 63mm dia (L&T or equivallant)

Supply and Labour for Installation,testing and commission of brass Non return valves (NRV) with test pressure of Shell 25kg/cm²g and seat 16kg/cm²g stated as follows with all supports, fixing and fitting all as specified and complying to relevent standards.: 50mm dia (L&T or equivallant)

Supply and Labour for Installation,testing and commission of brass Air release valve (ARV) with test pressure of Shell 25kg/cm²g and seat 16kg/cm²g stated as follows with all supports, fixing and fitting all as specified and complying to relevent standards.: 20mm dia (L&T or equivallant)

Supply and Labour for Installation,testing and commission of brass Air release valve (ARV) with test pressure of Shell 25kg/cm²g and seat 16kg/cm²g stated as follows with all supports, fixing and fitting all as specified and complying to relevent standards.: 25mm dia (L&T or equivallant)

Supply and Labour for Installation of Lead free PVC-U pasted pipe using Solvent Cement ISI Marked [As per IS 4985] with Heavy duty ISI Marked PVC fittings through floor, concrete etc. with suitable Ts, Elbows, Bends, Y's etc and Adapters, Airvents, as required. It should be well replastered and refinished using cement plaster 1:3 mix (cement : coarse sand). Testing of the system for leakage and Air tightness should be done appropriately. (Supreme/Astral/ Finolex or equivallant) (4kg/cm2): 40mm OD Waste Piping

Supply and Labour for Installation of Lead free PVC-U pasted pipe using Solvent Cement ISI Marked [As per IS 4985] through floor, concrete etc. with suitable Heavy duty ISI Marked PVC fittings such as Tees, Elbows, Bends, Y's etc and Adapters, Airvents, as required. It should be well replastered and refinished using cement plaster 1:3 mix (cement : coarse sand). Testing of the system for leakage and Air tightness should be done appropriately. (Supreme/Astral/ Finolex or equivallant) (4kg/cm2): 50mm OD Waste Piping

Supply and Labour for Installation of Lead free PVC-U pasted pipe using Solvent Cement ISI Marked [As per IS 4985] through floor, concrete etc. with suitable Heavy duty ISI Marked PVC fittings such as Tees, Elbows, Bends, Y's etc and Adapters, Airvents, as required. Ts, Elbows, Bends, Y's etc and Adapters, Airvents, as required. It should be well replastered and refinished using cement plaster 1:3 mix (cement : coarse sand). Testing of the system for leakage and Air tightness should be done appropriately. (Supreme/Astral/ Finolex or equivallant) (4kg/cm2): 63mm OD Waste Piping

Supply and Labour for Installation of Lead free PVC-U pasted pipe using Solvent Cement ISI Marked [As per IS 4985] through floor, concrete etc. with suitable Heavy duty ISI Marked PVC fittings such as Tees, Elbows, Bends, Y's etc and Adapters, Airvents, as required. Ts, Elbows, Bends, Y's etc and Adapters, Airvents, as required. It should be well replastered and refinished using cement plaster 1:3 mix (cement : coarse sand). Testing of the system for leakage and Air tightness should be done appropriately. (Supreme/Astral/ Finolex or equivallant) (4kg/cm2): 75mm OD Waste Piping

Supply and Labour for Installation of Lead free PVC-U pasted pipe using Solvent Cement ISI Marked [As per IS 4985] through floor, concrete etc. with suitable Heavy duty ISI Marked PVC fittings such as Tees, Elbows, Bends, Y's etc and Adapters, Airvents, as required. Ts, Elbows, Bends, Y's etc and Adapters, Airvents, as required. It should be well replastered and refinished using cement plaster 1:3 mix (cement : coarse sand). Testing of the system for leakage and Air tightness should be done appropriately. (Supreme/Astral/ Finolex or equivallant) (4kg/cm2): 110mm OD soil Piping

Supply and Labour for Installation of Lead free UPVC SWR Type A pasted pipe using Solvent Cement ISI Marked [As per IS 13592] with Heavy duty ISI Marked PVC fittings through open Walls / Ducts etc with suitable Ts, Elbows, Bends, Y's etc and Adapters, Airvents, concrete etc. as required including necessory scaffoldings. It should be well replastered and refinished using cement plaster 1:3 mix (cement : coarse sand). Testing of the system for leakage and Air tightness should be done appropriately. (Supreme/Astral/ Finolex or equivallant): 110mm OD Waste Piping

Supply and Labour for Installation of Lead free UPVC SWR Type A pasted pipe using Solvent Cement ISI Marked [As per IS 13592] with Heavy duty ISI Marked PVC fittings through open Walls / Ducts etc with suitable Ts, Elbows, Bends, Y's etc and Adapters, Airvents, concrete etc. as required including necessory scaffoldings. It should be well replastered and refinished using cement plaster 1:3 mix (cement : coarse sand). Testing of the system for leakage and Air tightness should be done appropriately. (Supreme/Astral/ Finolex or equivallant): 160mm OD Waste Piping

Supply and Labour for Installation of Lead free UPVC SWR Type A pasted pipe using Solvent Cement ISI Marked [As per IS 13592] with Heavy duty ISI Marked PVC fittings through open Walls / Ducts etc with suitable Ts, Elbows, Bends, Y's etc and Adapters, Airvents, concrete etc. as required including necessory scaffoldings. It should be well replastered and refinished using cement plaster 1:3 mix (cement : coarse sand). Testing of the system for leakage and Air tightness should be done appropriately. (Supreme/Astral/ Finolex or equivallant): 75mm vent pipe

Supply and Labour for Installation of Lead free UPVC SWR Type B pasted pipe using Solvent Cement ISI Marked [As per IS 13592] with suitable Heavy duty ISI Marked PVC fittings such as Ts, Elbows, Bends, Y's etc through trench having upto a depth of 1mtr /as per site condition and to make corresponding slope hence complete including excavation and back filling. Testing of the system for leakage and Air tightness should be done appropriately. (Supreme/Astral/ Finolex or equivallant): 110mm OD

Supply and Labour for Installation of Lead free UPVC SWR Type B pasted pipe using Solvent Cement ISI Marked [As per IS 13592] with suitable Heavy duty ISI Marked PVC fittings such as Ts, Elbows, Bends, Y's etc through trench having upto a depth of 1mtr /as per site condition and to make corresponding slope hence complete including excavation and back filling. Testing of the system for leakage and Air tightness should be done appropriately. (Supreme/Astral/ Finolex or equivallant): 160mm OD

Supply and Labour for Installation of Lead free UPVC SWR Type A pasted pipe using Solvent Cement ISI Marked [As per IS 13592] with Heavy duty ISI Marked PVC fittings such as Ts, Elbows, Bends, Y's through Ceiling as per site condition and to make corresponding slope hence complete including necessory scaffoldings. Testing of the system for leakage and Air tightness should be done appropriately. (Supreme/Astral/ Finolex or equivallant): 110mm OD

Supply and Labour for Installation of Lead free UPVC SWR Type A pasted pipe using Solvent Cement ISI Marked [As per IS 13592] with Heavy duty ISI Marked PVC fittings such as Ts, Elbows, Bends, Y's through Ceiling as per site condition and to make corresponding slope hence complete including necessory scaffoldings. Testing of the system for leakage and Air tightness should be done appropriately. (Supreme/Astral/ Finolex or equivallant): 160mm OD

Supply and Labour for Installation of Lead free UPVC SWR Type A pasted pipe using Solvent Cement ISI Marked [As per IS 13592] with Heavy duty ISI Marked PVC fittings such as Ts, Elbows, Bends, Y's through Ceiling as per site condition and to make corresponding slope hence complete including necessory scaffoldings. Testing of the system for leakage and Air tightness should be done appropriately. (Supreme/Astral/ Finolex or equivallant): 200mm OD

Supply and Labour for Installing at site UPVC multi inlet traps and outlet connections to pipes using solvent cement complete as required for floor drains.: 110x75x50/40mm. (Supreme/Astral/ Finolex or equivallant)

Providing and fixing 125x125mm CP Stainless Steel Gratings with Cockroach Protection for multi inlet floor trap.

Supply and Labour for Installing at site Open UPVC lead free ASTM Schedule 40 Pipe of Equivalent Standard Size with all fittings like bends, Ts, y's etc for Water supply Joined using Solvent Cement fittings with metal inserts suitable for the working pressure through above terrace floor supporting exposed pipes using cement mortar at 60cm intervals. Hydrostatic Testing of the Pipes using 10kg/cm2 test pressure for specified time period (Supreme/Astral/Finolex or equivallant): 63 mm Nominal dia

Supply and Labour for Installing at site Open UPVC lead free ASTM Schedule 40 Pipe of Equivalent Standard Size with all fittings like bends, Ts, y's etc for Water supply Joined using Solvent Cement fittings with metal inserts suitable for the working pressure through above terrace floor supporting exposed pipes using cement mortar at 60cm intervals. Hydrostatic Testing of the Pipes using 10kg/cm2 test pressure for specified time period (Supreme/Astral/Finolex or equivallant): 50 mm Nominal dia

Supply and Labour for Installing at site Open UPVC lead free ASTM Schedule 40 Pipe of Equivalent Standard Size with all fittings like bends, Ts, y's etc for Water supply Joined using Solvent Cement fittings with metal inserts suitable for the working pressure through above terrace floor supporting exposed pipes using cement mortar at 60cm intervals. Hydrostatic Testing of the Pipes using 10kg/cm2 test pressure for specified time period (Supreme/Astral/Finolex or equivallant): 40 mm Nominal dia

Supply and Labour for Installing at site Concealed/open UPVC ASTM Schedule 40 Pipe of Equivalent Standard Size with all fittings like bends, Ts, y's etc for Water supply Joined using Solvent Cement fittings with metal inserts suitable for the working pressure through Inside walls, ceiling, concrete, duct. etc. using existing rails/supports or GI clamps/supports as required including necessory scaffoldings. Hydrostatic Testing of the Pipes using 10kg/cm2 test pressure for specified time period (Supreme/Astral/Finolex or equivallant): 20mm Nominal dia

Supply and Labour for Installing at site Concealed/open UPVC ASTM Schedule 40 Pipe of Equivalent Standard Size with all fittings like bends, Ts, y's etc for Water supply Joined using Solvent Cement fittings with metal inserts suitable for the working pressure through Inside walls, ceiling, concrete, duct. etc. using existing rails/supports or GI clamps/supports as required including necessory scaffoldings. Hydrostatic Testing of the Pipes using 10kg/cm2 test pressure for specified time period (Supreme/Astral/Finolex or equivallant): 25mm Nominal dia

Supply and Labour for Installing at site Concealed/open UPVC ASTM Schedule 40 Pipe of Equivalent Standard Size with all fittings like bends, Ts, y's etc for Water supply Joined using Solvent Cement fittings with metal inserts suitable for the working pressure through Inside walls, ceiling, concrete, duct. etc using existing rails/supports or GI clamps/supports as required including necessory scaffoldings. Hydrostatic Testing of the Pipes using 10kg/cm2 test pressure for specified time period (Supreme/Astral/Finolex or equivallant): 32mm Nominal dia

Supply and Labour for Installing at site Concealed/open UPVC ASTM Schedule 40 Pipe of Equivalent Standard Size with all fittings like bends, Ts, y's etc for Water supply Joined using Solvent Cement fittings with metal inserts suitable for the working pressure through Inside walls, ceiling, concrete, duct. etc using existing rails/supports or GI clamps/supports as required including necessory scaffoldings. Hydrostatic Testing of the Pipes using 10kg/cm2 test pressure for specified time period (Supreme/Astral/Finolex or equivallant): 40mm Nominal dia

Supply and Labour for Installing at site Concealed/open UPVC ASTM Schedule 40 Pipe of Equivalent Standard Size with all fittings like bends, Ts, y's etc for Water supply Joined using Solvent Cement fittings with metal inserts suitable for the working pressure through Inside walls, ceiling, concrete, duct. etc using existing rails/supports or GI clamps/supports as required including necessory scaffoldings. Hydrostatic Testing of the Pipes using 10kg/cm2 test pressure for specified time period (Supreme/Astral/Finolex or equivallant): 50mm Nominal dia

Supply and Labour for Installation of Lead free UPVC ASTM Schedule 40 Pipe of Equivalent Standard Size with all fittings like bends, Ts, y's etc for Water supply Joined using Solvent Cement fittings etc through trench having upto a depth of 1mtr /as per site condition complete including excavation and back filling. Testing of the system for leakage and Air tightness should be done appropriately. (Supreme/Astral/ Finolex or equivallant): 70mm OD

Supply and Labour for Installing at site Concealed/open CPVC SDR 11 Pipes of Equivalent Standard Size with all fittings like bends, Ts, y's etc for Water supply Joined using Solvent Cement fittings with metal inserts suitable for the working pressure through Inside walls, ceiling, concrete, duct. etc using existing rails/supports or GI clamps/supports as required including necessory scaffoldings. Hydrostatic Testing of the Pipes using 10kg/cm2 test pressure for specified time period (Supreme/Astral/Finolex or equivallant): 20mm Nominal dia

Supply and Labour for laying of 63mm nominal dia HDPE PE80 pipe having pressure withstanding capacity PN8 pipe including jointing of the pipe and testing of joints through Trench having upto a depth of 1mtr /as per site condition and backfilling the same. (Supreme/Finolex/Astral)

Supplying approved make PVC gully trap of size 160 x 110mm and grating 150mmx150mm size and light duty C.I cover with frames 300mmx300mm size(inside) the weight of cover to be not less than4.5kg and frame to be not less than2.7kg (CI MH cover and frame as per IS:1726) single sealed of size conveying to size the above mentioned items and constructing 30cmx30cm internal size gully trap chamber and depth upto 60cm,115 thk brick wall in CM 1:6 on a foundation of PCC 1:4:8.100mm thick plastering inside with CM 1:3,12mm thk with a neat cement flushing coat and conveying to site,cleaning ,installing and testing approved make PVC gully trap with 160mm outlet(Fabricated),surrounding with CC 1:1.5:3, 150x150mmm,top with grating above the PVC gulley trap and light duty CI cover and frame over the chamber including cost of all materials, etc complete as per approved drawing and as directed by Engineer-in- Charge.

Supplying approved make PVC gully trap of size 110 x 110mm and grating 150mmx150mm size and light duty C.I cover with frames 300mmx300mm size(inside) the weight of cover to be not less than4.5kg and frame to be not less than2.7kg (CI MH cover and frame as per IS:1726) single sealed of size conveying to size the above mentioned items and constructing 30cmx30cm internal size gully trap chamber and depth upto 60cm,115 thk brick wall in CM 1:6 on a foundation of PCC 1:4:8.100mm thick plastering inside with CM 1:3,12mm thk with a neat cement flushing coat and conveying to site,cleaning ,installing and testing approved make PVC gully trap with 110mm outlet(Fabricated),surrounding with CC 1:1.5:3, 150x150mmm,top with grating above the PVC gulley trap and light duty CI cover and frame over the chamber including cost of all materials, etc complete as per approved drawing and as directed by Engineer-in- Charge.

Supply and Labour for Installation, testing and commissioning of PVC type Manholes, valvechamber, sandtrap etc.. with suitable PCC around it with fit and finish and including excavation, back-filling,PCC, disposel, waterproofing etc upto 1 mtr depth/as per the site condition all in accordance with the drawing/ specification or relevant standards and its Cover with suitable frame and accessories 300mmx300mm ( Supreme/Finolex/Astral or equivallant)

Supply and Labour for Installation, testing and commissioning of PVC type Manholes, valvechamber, sandtrap etc.. with suitable PCC around it with fit and finish and including excavation, back-filling,PCC, disposel, waterproofing etc upto 1 mtr depth/as per the site condition all in accordance with the drawing/ specification or relevant standards and its Cover with suitable frame and accessories 450mmx450mm ( Supreme/Finolex/Astral or equivallant)

Supply and Labour for Installation, testing and commissioning of PVC type Manholes, valvechamber, sandtrap etc.. with suitable PCC around it with fit and finish and including excavation, back-filling,PCC, disposel, waterproofing etc upto 1 mtr depth/as per the site condition all in accordance with the drawing/ specification or relevant standards and its Cover with suitable frame and accessories 600mmx600mm ( Supreme/Finolex/Astral or equivallant)

Supply and Labour for Installation, testing & commisssioning of ISI marked FRP manhole cover and frame of Heavy/Medium/Light Duty conforming to the latest relevant IS specifications. (Manhole Cover : Thermodrain/Fibrocast or equivallant) Size: 60cm x 60cm (25 ton withstanding capacity) (Heavy Duty)

Supply and Labour for Installation, testing & commisssioning of ISI marked FRP manhole cover and frame of Heavy/Medium/Light Duty conforming to the latest relevant IS specifications. (Manhole Cover : Thermodrain/Fibrocast or equivallant) Size: 60cm x 60cm (5 ton withstanding capacity) (Light Duty)

Supply and Labour for Installing and Leveling Pipe Supports Fabricated from GI Slotted Rails/Channels of corresponding as per the site condition with suitable for carrying the operating weight of pipe and the fluids, 8-10 mm Dia GI Adjustable Threaded Rods and Anchor Fasteners on wall, U clamps etc. as appropriate. 30cm width

Supply and Labour for Installing and Leveling Pipe Supports Fabricated from GI Slotted Rails/Channels of corresponding as per the site condition with suitable for carrying the operating weight of pipe and the fluids, 8-10 mm Dia GI Adjustable Threaded Rods and Anchor Fasteners on wall, U clamps etc. as appropriate. 80cm width

Supply and Labour for Installing and Leveling Pipe Supports Fabricated from GI Slotted Rails/Channels of corresponding as per the site condition with suitable for carrying the operating weight of pipe and the fluids, 8-10 mm Dia GI Adjustable Threaded Rods and Anchor Fasteners on wall, U clamps etc. as appropriate. 100cm width

Providing and fixing frameless mirror complete, with all four edges machine polished/bevelled and back side protected with safety film and 4 mm thick BWP grade Plywood backing and fixed on walls with mirror screws(spacer). The rate is including cost and conveyance of all materials, labour charges, lead,lift ,cutting and making good the walls, floors,slab etc complete as&lt;br&gt;directed by the Engineer in charge at all levels

Supply and Labour for Installation of Labour for Installation of Robe Hook (Jaquar AEC-CHR-1161 or equivallant)

Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

Supply and Labour for Installation of Soap Dispenser

Supply and Labour for Installation of Water Heater of 5LTR Capacity (Make:Vguard/Racold or equivallant)

Supply and Labour for Installation of Labour for Installation of Hand Dryer

Supply and Labour for Installation of Labour for Installation of water level float switch system for water level controling(sontay/system sensor)

Charges for core cutting of slabs/beam for pipes of following sizes and include filling the gap with waterproof material and hence complete.Core cutting machine shall be in the scope of contractor. 110 mm dia

Charges for core cutting of slabs/beam for pipes of following sizes and include filling the gap with waterproof material and hence complete.Core cutting machine shall be in the scope of contractor. 50 mm dia

Charges for core cutting of slabs/beam for pipes of following sizes and include filling the gap with waterproof material and hence complete.Core cutting machine shall be in the scope of contractor. 40 mm dia

Supplying 32mm Braided heavy duty PVC hose

Supplying 32mm Non - Braided PVC hose

Supplying and installing ready made PVC Septic tank including the cost of carriage, trenching, placing at the level below ground level as specified as per the direction of engineer in charge (Provision for CC/RCC/Sand/06mm aggregate for the preparation of bed shall be paid separately) - 40-50 flush capacity (make: UNITED)

Providing and fixing chrome plated brass battery based infrared sensor operator pillar cock, having foam flow technology (Jaquar model SNR - CHR - 5101N or equivallant)

Supply of ISI marked 1000Ltr, 3 layer water tank (Sintex)

Supply of ISI marked 500Ltr, 3 layer water tank (Sintex)

Supply and installation of 20 mm water meter (Chambal)

Supply and installation of 25 mm water meter (Chambal)

ELECTRICAL WORKS

DP STRUCTURE

Supply,Installation ,testing and commissioning of double pole structure including all accessorioes like AB switch,DO fuse,lightning arrestor,insulators,inter connecting,rate include required earthing and civil works.

INDOOR UNITIZED SUBSTATION

Supply Installation, erection ,testing and commissioning of 250KVA 11KV/440V , 3phase ,50Hz, CU wound ,dry type [cast resin] indoor unitized substation with LBS,metering panel,TOD meter, CT PT Unit,neutral CT,all standard accessories and control wiring. Including testing TOD meter ,CT-PT unit,neutral CT from concerned authorities.

DIESEL GENERATOR

Supply Installation, erection ,testing and commissioning of 3 phase 200 KVA Diesel generator,all standard accessories and control wiring, including testing of neutral CT, relays, meters etc.

Supply and Labour charges for erection of additional length of MS[B class medium grade]exhaust pipe line of suitable sizes ,with heat resistant Al painting to building top for 200 KVA DG.

HT CABLING

Supply, laying, testing and commissioning of of 3c X 185sqmm 11KV XLPE cable through 100mm GI pipe( including supply of 100mm C Class GI pipe) vertically along DP structure with suitable accessories and hence complete.

Supply, laying, testing and commissioning of of 3cX185sqmm 11KV XLPE cable through inbuilt concrete trench

HT ENDTERMINATION Supply and providing charges for carrying out cable end termination using push on/heat shrinkable cable termination kit, Aluminium crimping lugs, gland earthing of adequate size etc., complete.

3C X 185sqmm Outdoor Type

3C X 185sqmm Indoor Type

Supply, installation, testing and commissioning of Panels as per specification in the bid dcoument

Supply, installation, testing and commissioning of MSB Panel as per specification in the bid document

Supply, installation, testing and commissioning of APFC Panel as per specification in the bid document

Supply, installation, testing and commissioning of SSB 1 Panel as per specification in the bid document

Supply, installation, testing and commissioning of SSB 2 Panel as per specification in the bid document

Supply, installation, testing and commissioning of Lift Panel as per specification in the bid document

LT CABLE LAYING: Supply, Laying, testing and commissioning of following sizes of 1.1KV XLPE insulated, PVC sheathed Aluminium conductor (A2XFY) UG Cable through HDPE pipe/excavated trenches/cable tray/hume pipe/wall including supply and fixing of clamping materials.

3.5 core 185 sq mm

3.5 core 150 sq mm

3.5 core 120sqmm

3.5 core 95sqmm

3.5 core 70 sq mm

2 core 50 sq mm

4c x 25 sqmm

4c x 16 sqmm

4c x 10 sqmm

4c x 6 sqmm

Supply, Laying, testing and commissioning of following sizes of 1.1KV XLPE insulated, PVC sheathed Copper conductor UG Cable through HDPE pipe/excavated trenches/cable tray/hume pipe/wall including supply and fixing of clamping materials.

4c x 2.5 sqmm cu cable

3c x 4 sqmm flat cu cable

4c x 4 sqmm flat cu cable

9c x 2.5 Cu control cable

LT CABLE TERMINATION: Supply and providing indoor end termination of following sizes of 1.1KV XLPE insulated, PVC sheathed Al conductor (A2XFY) UG Cable including supply of necessary steel glands, Aluminium lugs and gland earthing by copper shim etc complete.

3.5 core 185 sqmm

3.5 core 150 sqmm

3.5 core 120 sqmm

3.5 core 95 sqmm

3.5 core 70 sqmm

2c x 50 sqmm

4c x 25 sqmm

4c x 16 sqmm

4c x 10 sqmm

4c x 6 sqmm

End Termination of Armoured Copper Cable with suitable glands & sockets

4c x 2.5 sqmm Cu cable

3c x 4 sqmm flat Cu cable

4c x 4 sqmm flat Cu cable

9c x 2.5 Cu control cable

PLATE EARTHING

Supply and installation charges for Providing efficient plate earthing as per IS 3043 using 1200mm x 1200mm x 12.5mm CI plate electrode, 40mm GI watering pipe clamped to the plate and extending to the middle of the plate, all necessary ring copper strip 25x3 sqmm, clamps with necessary earth pits and filling around the plate 15cm with charcoal, sand and soil including excavation and refilling and all connected civil works.Providing inspection chamber with heavy duty cast iron cover hinged to cast iron frame

Supply and installation charges for Providing efficient plate earthing as per IS 3043 using 1200mm x 1200mm x 12.5mm GI plate electrode, 40mm GI watering pipe clamped to the plate and extending to the middle of the plate, all necessary ring copper strip 25x3 sqmm, clamps with necessary earth pits and filling around the plate 15cm with charcoal, sand and soil including excavation and refilling and all connected civil works.Providing inspection chamber with heavy duty cast iron cover hinged to cast iron frame

PIPE EARTHING

Supply & Labour charges for Providing efficient pipe earth stations using 38mm dia 2.5m long GI pipe electrode, filling salt sand and charcoal, construction of earth chamber and covering with heavy duty cast iron cover hinged to cast iron frame, including excavation and refilling. inclusive of and all connected civil works

EARTH GRIDS Supply of following sizes of copper flats/GI flat/copper wires for earthing of HT switch yard equipment, motors, isolators, push button stations, switchboards, motor control centers, distribution Boards, Generator etc. and Interconnection of earth pits as per technical Specification. Earth strip/wires to be taken through GI pipes/ cable trays/hume pipes/built in trenches/soil etc. wherever necessary. Rate shall be including excavation and refilling and all connected civil works, necessary tinning, providing cu sockets brass nuts & bolts,welding and end termination of copper strips/wires with all accessories required for the completion of work.

25x3 Cu Strip

No.8 SWG Cu

No.10 SWG Cu

40x6 GI Strip

25x3 Cu Strip Earth Bench

CABLE TRAY Supply and labour for laying following strip galvanized GI preforated cable Tray( as per IS 61537) using suitable connector, supports and required acccessories

100mm x 60mm

200mm x 60mm

300mm x 60mm

500mm x 60mm

Supply and Installation of factory fabricated Perforated SS Cable tray ( as per IS 61537) of following sizes using suitable connector and spports as per specifications with all required accessories.

Supply and Installation of factory fabricated MS powder coated Cable tray ( as per IS 61537) with cover of following sizes as per specifications with all required accessories.

Supply and Installation wall trunking channels shall be made of lead free polyvinyl chloride with ROHS compliance non fire propagating material complying to DIN EN 500085-1,2. The system must have a base perforation so as to allow installation in the wall. The trunking shall have all accessories like partition, Internal corner cover, External corner cover , T intersection cover, Flat Angle cover , cover clip …etc for cable management.

Supply & Labour for Fabrication and fixing of Vertical/Horizontal type M.S. Angle Cable Trays and MS flat for supporting cable /pipes using suitable accessesories. The same shall be fixed on ceiling/wall. The cable trays and supports shall be painted with 2coats of Zinc chromate primer and 2coats of enamel paint.

Supply and Labour charges for Laying chequered plate for covering cable trenches as per required sizes including cutting,welding related works

DISTRIBUTION BOARD

3PHASE 6WAY TPN HORIZONTAL LDBs Supply & Labour charges for Installation, testing & commissioning of 3Phase 6way Horizontal DB with Double Door With 32A 4P 30mA ELCB 1Nos and 32A 4P MCB 1Nos as incomer and 18Nos 6A/10A SP C curve MCBs as out goings with all necessary accessories like Neutral link, Earth link etc.(Ferruling shall be done in all circuits for proper identifications)

3PHASE 6WAY TPN HORIZONTAL PDBs Supply & Labour charges for Installation, testing & commissioning of 3Phase 6way Horizontal DB with Double Door With 40A 4P 100mA ELCB 1Nos and 40A 4P MCB 1Nos as incomer and 18Nos 10A/16A/20A SP C curve MCBs as out goings with all necessary accessories like Neutral link, Earth link etc.(Ferruling shall be done in all circuits for proper identifications)

3PHASE 6WAY VTPN DBs Supply & Labour charges for Installation, testing & commissioning of 3Phase 6way VTPN DB with Double Door With 63A 4P MCB as incomer and 2Nos 32A TP C curve MCBs , 2Nos 40A TP C curve MCBs and 6Nos of 16A C curve SP MCBs as out goings with all necessary accessories like Neutral link, Earth link etc.(Ferruling shall be done in all circuits for proper identifications)

3PHASE 6WAY VTPN DBs Supply & Labour charges for Installation, testing & commissioning of 3Phase 6way VTPN DB with Double Door With 63A 4P MCB as incomer and 3Nos 32A TP C curve MCBs and 1Nos 40A TP C curve MCBs as out goings with all necessary accessories like Neutral link, Earth link etc.(Ferruling shall be done in all circuits for proper identifications)

3PHASE 4WAY VTPN DBs Supply & Labour charges for Installation, testing & commissioning of 3Phase 4way VTPN DB with Double Door With 63A 4P MCB as incomer and 3Nos 32A TP C curve MCBs3Nos 16A C curve SP MCBs as out goings with all necessary accessories like Neutral link, Earth link etc.(Ferruling shall be done in all circuits for proper identifications)

3PHASE 4WAY VTPN DBs Supply & Labour charges for Installation, testing & commissioning of 3Phase 4way VTPN DB with Double Door With 100A DP ISO as incomer and 10Nos 32A SP C curve MCBs as out goings with all necessary accessories like Neutral link, Earth link etc.(Ferruling shall be done in all circuits for proper identifications)

1PHASE 16WAY SPN DBs Supply & Labour charges for Installation, testing & commissioning of 1Phase 16way SPN DB with Double Door With 32A DP MCB as incomer and 14Nos 10A SP C curve MCBs as out goings with all necessary accessories like Neutral link, Earth link etc and Class B+C/ Type 1+2 Surge Arrestor(2+0).(Ferruling shall be done in all circuits for proper identifications)

1PHASE 12WAY SPN DBs Supply & Labour charges for Installation, testing & commissioning of 1Phase 12way SPN DB with Double Door With 32A DP 30mA ELCB 1Nos and 32A DP C curve MCB 1Nos as incomer and 10Nos 10A SP C curve MCBs as out goings with all necessary accessories like Neutral link, Earth link etc.(Ferruling shall be done in all circuits for proper identifications

POINT WIRING Supply and carrying out wiring for light points, plug points and fan points including testing and commissioing in concealed system from control board to the respective points.Wiring is to be done by using single core PVC insulated stranded 1.1 kVgrade class2 FRLSH copper wire size of 1.5sqmm along with same size wire as earth continuity conductor through rigid 20/25mm PVC ISI grade conduit with necessary bends,Junction boxes, ceiling roses/angle batten,fan hooks,GI box and all accessories including modular type switches and plate.(The point length limited to 10 mtrs ). One Light Point Controlled by one number 6A Switch

same as item No. 3.072 but Two light point controlled by one number 6A Switch

same as item No. 3.072 but Three light point controlled by one number 6A Switch

same as item No. 3.072 but 1 No. ceiling fan point controlled by 1 No. 6A switch, Without regulator

same as item No. 3.072 but 1 No. ceiling fan point controlled by 1 No. 6A switch, With regulator

same as item No. 3.072 but Exhaust fan/Bracket(including socket) Fan Point controlled by 1 No. 6A SP Switch

same as item No. 3.072 but One light point and One exhaust fan point(including socket) controlled by one number 6A Switch

same as item No. 3.072 but 6A plug point in combined position

same as item No. 3.072 but 6A plug point in independent position

same as item No. 3.072 but 1 No. Light point controlled by two numbers 6A two way switch

same as item No. 3.072 but Buzzer point wiring with 1 No. 6A buzzer plate type push buttons in sheet steel box with cover.

MODULAR COMBINATION OF SOCKETS

Supply and fixing of Modular combination socket for UPS Power outlets (1 No. 6A socket & 1 No. 13A Multi socket with 2 No. 6A switch suitable front plate and back box including internal connections etc complete) Grey Colour

Supply and fixing of Modular combination socket for EB Power outlets (1 Nos. 6A socket & 1 No. 13A Multi socket with 2 Nos. 6A switchs suitable front plate and back box including internal connections etc complete)

Supply and fixing of Modular combination socket for UPS Power outlets ( 2 Nos. 6A socket & 1 No. 13A Multi socket with 2 Nos. 6A switch with suitable front plate and back box including internal connections etc complete) Grey Colour

Supply and fixing of Modular combination socket for EB Power outlets ( 2 Nos. 6A socket & 1 No. 13A Multi socket with 2 Nos. 6A switch suitable front plate and back box including internal connections etc complete)

Supply and fixing of 16A 230V Modular type Power Socket with one number 16A switch with suitable front plate and back box including internal connections etc complete.

CIRCUIT WIRING Supply and carrying out circuit wiring or extra length more than 10 mtr in point wiring in concealed system using following runs of single core PVC insulated 1.1 kV grade Class 2 copper wire FRLSH through 20/25mm PVC ISI grade conduit with necessary bends,Junction boxes, including giving connections etc complete.

3 runs 1.5 sqmm

3 runs 2.5 sqmm

3 runs 4 sqmm

3 runs 6 sqmm

Supply and fixing of 63A DP isolator in open enclosure

Supply and fixing of 20A SP, 2P+E metallic socket with cover and plug top fitted in a suitable metallic enclosure controlled by 20A SP MCB with nuetral link and inter connections etc complete. As per IEC 61439-3

Supply and fixing of 32A SP, 2P+E metallic socket with cover and plug top fitted in a suitable metallic enclosure controlled by 32A SP MCB with nuetral link and inter connections etc complete. As per IEC 61439-3

Supply and fixing of 25A TPN isolator with DOL starter for 2HP motor with ON/OFF push button with suitable capacitors with cam operated system for changeover.

Supply and installation of 2HP DOL starter

Supply and installation of 5HP DOL starter

Supply and fixing of IP65 junction box with terminals

88 mm X 88 mm X 53 mm

139 mm X 119 mm X 70 mm

167 mm X 125 mm X 82 Mm

LIGHT FITTINGS Labour charges for, fixing, testing and commissioning on roof/truss/ceiling/fall ceilings/wall/pole of the following CFL/LED light fixtures with drivers/fans with rate include supply of screw fixing arrangement and 3 -core 1.5 sqmm flexible wires. (Supply of Light Fixtures shall be in the scope of MRCMPU).

9/12/15W/20W Surface Mounted Light

10/15/20W Round Surface Mounted Ceiling Light

5W Recessed Ceiling Light

Mirror Light 10W 1 feet battern light

20/40W LED tube light

15W LED bulkhead

10W LED spike

5W LED Foot Lamp

30/60W LED street light

40/60/100W LED Flood Light

18W suspended Type LED Down lighter

LED Mid-Bay/High- Bay

Supply of street light bracket fabricated from mild steel pipe as per specification

Supply installation testing and commissioning of 1mtr height Bollard Light.The rate inclusive of civil works required for foundations.

Supply installation testing and commissioning of Decorative Pole with single arm- 7 Meters.The rate inclusive of civil works required for foundations and earthing with all accessories.

Supply installation testing and commissioning of Decorative Pole with single arm- 3 Meters.The rate inclusive of civil works required for foundations and earthing with all accessories.

Supply installation testing and commissioning BLDC Ceiling Fan

Supply installation testing and commissioning BLDC Wall Fan

Supply installation testing and commissioning Heavy duty wall Fan

Supply installation testing and commissioning Tower Fan

Supply installation testing and commissioning Ceiling exhaust fan

Supply installation testing and commissioning Wall exhaust fan of 18" size, maximum free air deliver - 3500 cfm

Supply installation testing and commissioning Wall exhaust fan of 9" size, maximum free air deliver - 800 cfm

Supply,Installation ,testing and commissioning PIR ceiling mounted Lighting Management sensors

Supply and laying of 4inch Aluminium flexible pipe through inside false ceiling for ceiling exhaust fan with suitable accessories for support.

LIGHTNING PROTECTION SYTSEM: Air Terminal

Supply and laying of 8 mm Aluminum Round Conductor meets requirements of DIN EN 50164-2 (VDE 0185 part 202) & VDE 0185-305 (IS/IEC 62305)

Supply and fixing of Roof conductor holder for parapet- Polyamide Conductor holder: With M8 female thread or diameter 7mm, M8 Screw to connect the conductor holder.Weather and temperature resistant from -35 to +90 degree Celsius tested. The holder should have provision for two screws per holder.Conductor holder @ 1 meter distance

Supply and fixing of Polyamide roof cable holder for flat roof: DIN 48829 Form B1. Closed form with bottom. Filling weight 1Kg (frost-resistant concrete). Sleeve from polyethylene, black @ 1 meter distance.

Supply and fixing of Ridge conductor holder with tensioning spring - Stainless steel Conductor holder for mangalore tile roof: With Bottom section and conductor holder stainless steel (V2A) Clamping range 280-380 mm. Conductor holder @ 1 meter distance

Supply and fixing of Air terminals as per IS-IEC -62305 part-3 Nominal size Ø10/16 mm aluminium rod: 4 Mtr Airterminal: semi-hard (E-AlMgSiO5 corresponds to DIN 48801) Suitable for high wind load.Tested as per IEC 62561(1-8) and relevant test report should be submitted.

Supply and fixing of Stand for Fang Fix system 16 kg with base and clamp ,made up of frost resistant concrete

Providing of Stand for Fang Fix system 16 kg with base and clamp ,made up of frost resistant concrete and tested upto 100KA lightning current. Tested as per IEC 62561(1-8) and relevant test report should be submitted for 100kA lightning current testing.

Supply and fixing of cross universal connector: For T and cross connection, to route vertical down conductor /mesh formation made of hot dipped galvanised iron with necessary screws etc as required. Installed with 4 hexagonal bolts M8*25 with M8 hexagonal nuts .

Supply and fixing of expansion piece with connector: For equalising temperature related length changes. Necessary on conductors length over 20 meters. For round conductor Rd 8/ALU.

Connector: For T cross and parallel connectors. Quick installation using hexagonal bolt M10X30 high-grade hot dip galvanised. Conforms to the requirements according to DIN VDE 0185-305 (IS-IEC 62305)(2nos/expansion piece).

LIGHTNING PROTECTION SYTSEM: Down Conductor & Earthing

Supply and laying of 8 mm Aluminum Round Conductor along the verical periphery of building & Meets the requirements of DIN EN 50164-2 (VDE 0185 part 202) & VDE 0185-305 (IS/IEC 62305)

Supply and fixing of Roof conductor holder for parapet- Polyamide Conductor holder: With M8 female thread or diameter 7mm, M8 Screw to connect the conductor holder. The holder should have provision for two screws per holder.Weather and temperature resistant from -35 to +90 degree Celsius tested. Conductor holder @ 1 meter distance

Supply and fixing of Test Joint suitable to connect 8mm round conductor and max by 30x3 mm GI strip

Supply and fixing of Galvanised Steel Flat 30X3 mm thickness from earth electrode directly in ground at a depth of 1 feet including excavation and refilling. Flat conductor Hot Dipped Galvanized,not less than 63 microns galvanization thickness tested to IEC 62561

Supply and fixing of Cross connector for Flat: Suitable for 30mm Galvanised steel strip. Installed with 4 nos of hexagonal plate.

Supply and fixing of of flat conductor holder suitable for FL 30. Installed with 2 hexagonal bolts.

Supply and fixing of of Plastic Corrosion Protection strip: Approx 1.1 mm thick. Width 50mm. Made of petrolatum- coated chemical fibre fabric.

Supply and installation charges of UL Listed & CPRI Tested maintenance free ,Low carbon copper coated earth rod of 3 metre electrode having diameter of 14mm with copper coating thickness of 250micron tested as per IEC 62561-2 with accessories Universal clamp made of SS to connect rod with flat conductor,Earth conductivity enhancing compound shall be of 25 kg/pit,Heavy duty earth champer.

Supply and fixing of LT danger boards

Supply and installation of emergency push button

Supply and fixing of shock treatment chart in glass with frame

Supply and fixing of 11KV grade synthetic insulated mat 2 meter x 1 meter x 3mm conforming to IS:15652:2006

Supply and fixing of 440 V grade synthetic insulated mat 2 meter x 1 meter x 2.5mm conforming to IS:15652:2006

Supply and Fixing of laminated schematic drawings

Supply of 4 core 4 sqmm PVC insulated sheathed Copper wire

Supply of 4 core 2.5 sqmm PVC insulated sheathed Copper wire

Supply of 3 core 2.5 sqmm PVC insulated sheathed Copper wire

Supply of 3 core 1.5 sqmm PVC insulated sheathed Copper wire

Supply of good quality hand gloves with standing HT 33kV

Supply of SP 6/10 A MCB

Supply of SP 16/20 A MCB

Supply of 2P,16A MCB

Supply of 2P,32A MCB

Supply of 3P,32A MCB

Supply of 3P,40A MCB

Supply of 3P,63A MCB

Supply of 4P,40A MCB

Supply of 4P,63A MCB

Supply of 4P,100A Isolator

Supply of 2P,40A,30mA RCCB

Supply of 4P,40A,30mA RCCB –

Supply of 4P,63A,100mA RCCB –

Excavation for cable trenches in existing soil, depth upto 1 meter, including getting out the excavated soil, refilling with sand and or good soil after laying of cable/ pipe etc in layers of 20 cm, ramming, watering and disposal of surplus excavated soil as directed, if needed.

Cable Route Marker Galvanized Cast Iron plate with marking (LT/HT) diameter 150 mm with 600 mm long 25x25 mm MS. angle riveted/bolted with this plate and should be grounded in ground with PCC foundation

Supply Installation commissioning of 200L solar water heater

Supply Installation commissioning of sanitary napkin vending machine(30 napkin at a time)

Supply Installation commissioning of sanitary napkin destroyer with all ducting pipes

Supply and Installation, testing and commissioning of openwell submersible pumps of discharge at 35m head and min 200 LPM discharge including all required accessories like clamps, etc

Supply and Installation, testing and commissioning of openwell submersible pumps of discharge at 25m head and min 300LPS discharge including all required accessories like clamps, etc

Supply and Installation, testing and commissioning of sewage submersible pumps having minimum of 120 LPM discharge at 30m head including all required accessories like clamps, etc

Supply and Installation, testing and commissioning of sewage submersible pumps having minimum of 100LPM discharge at 20m head including all required accessories like clamps

Supply Installation commissioning of Boom Barrier

Supply of telephone unarmoured PVC insulated and sheathed 0.61 mm dia annealed tinned copper conductor in existing PVC conduit system including identification & connection at both ends.

Two pair telephone cable

Four pair telephone cable

Ten pair telephone cable

Twenty pair telephone cable

Supply of armoured telephone cable PVC insulated 0.61 mm dia annealed tinned copper conductor through conduits/pipes/trays etc. including identification & connection at both ends.

Five pair armoured telephone cable

Ten pair armoured telephone cable

Twenty pair armoured telephone cable

Fifty pair armoured telephone cable

Hundred pair armoured telephone cable

Supply of armoured telephone cable PVC insulated 0.61 mm dia annealed tinned copper conductor through conduits/pipes/trays etc. including identification & connection at both ends.

100 pair copper telephone tag block

50 pair copper telephone tag block

20 pair copper telephone tag block

10 pair copper telephone tag block

5 pair telephone tag block

Supply and laying of following type PVC Conduit with all accessories for telephone wiring- concealed or surface system

20MM PVC Conduit

25MM PVC Conduit

Supply and laying of CAT 6 cable through exisiting PVC conduit for DATA Wiring/Camera Wiring

Supply and laying of following type PVC Conduit with all accessories for Data cabling/Camera concealed or surface system

20MM PVC Conduit

25MM PVC Conduit

Supply and laying12 core OM3 mm Armoured outdoor OFC cable through HDPE/conduit pipe

Supply and laying 32mm HDPE pipe

Supply and fixing Cat6 I/O Field side

Supply and fixing Cat6 I/O Panel side

Supply and fixing BS faceplate,dual port

Supply and fixing BS faceplate,single port

Supply,installation and commissiong ST Patch panel 24 port for cat 6

Supply,installation and commissiong 1U 24port LIU unit for OFC

Supply and installation Patch cord OM3 -1Mtr

Supply and installation Patch cord OM3 -2Mtr

Fibre slicing charges

OTDR Testing and report submission on OFC cable

Fluke Testing and report submission on Cat6 cable

Supply installation testing and commissioning of True Online Double Conversation 3x10KVA/9KW ONLINE UPS, three phase input & single-phase output. UPS should be suitable for parrellel operation and each ups having the battery set.

APPROVALS

Preperation of drawing,and getting all necessary approvals [initial & final],inspection etc from the electrical inspectorate including soil resitance test. Providing all paper work including HT agreement prepration & assistance in availing power allocation from EB etc

FIRE AND SAFETY

Supply,Installation,Testing & Commissioning of Horizontal, End suction, Top Discharge Back Pull out Design Centrifugal pump with standard construction with CAST IRON impeller with Love joy coupling with Gland Rope Packing arrangement coupled to squirrel cage, TEFC motor with GI Fabricated channel Base plate, Coupling, GI Coupling Guard, Anti Vibration Pad Inclusive.2280 LPM @ 50 Mtr head. 40 HP , 2900 RPM Pump Classification: Fire Pump Casing Material: Cast Iron FG 260 Impeller Material: Cast Iron FG 260 Shaft Material: Carbon Steel Shaft Sleeve Material: S.S AISI 410 Counter Flange Material: Cast Iron Suction & Discharge Flange Rating: PN 16

Supply,Installation,Testing & Commissioning of horizontal, end suction, top discharge centrifugal pump of standard Construction with BRONZE Impeller GLAND ROPE PACKING ARRANGEMENT coupled to electric start, water cooled, Radiator type diesel oil engine with GI fabricated channel base plate, Standard coupling, GI Coupling guard with batteries, leads and fuel tank .Anti Vibration pads inclusive.2280 LPM @ 50 Mtr head. 40 HP , 2900 RPM Pump Classification: Fire Pump Pump Construction: Pump With Diesel Engine Component Materials Casing Material: Cast Iron FG 260 Impeller Material: Bronze LTB2 Shaft Material: S.S AISI 410 Accessories Base Frame & Coupling: Included, Battery, Diesel Tank, Presssure Gauge, Battery Charger. Suction & Discharge Flange Rating: PN 16

Supply,Installation,Testing & Commissioning of CENTRIFUGAL MONOBLOCK PUMP suitable for AC 3 Phase/415 Volts/50 Hz supply. Pump is of CI construction, CAST IRON Impeller, GLAND PACKED . Totally enclosed fan ventilated motor is capable of withstanding wide voltage fluctuation ranging from 300 to 440 volts. 180 lpm @ 50 mtr head , 5 HP Product Configuration Pump Classification: Fire Pump Component Materials Volute Material: Cast Iron Impeller Material: Cast Iron Shaft Material: Carbon Steel

Providing, laying, testing & commissioning C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, SS nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with MS Angle support of size 50mm x50mmx5mm with epoxy primer and epoxy paint and e and painting with two or more coats of synthetic enamel paint of required shade complete as required : 150mm nominal dia

Providing, laying, testing & commissioning C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, SS nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with MS Angle support of size 50mm x50mmx5mm withpainting with two or more coats of synthetic enamel paint over two coats primer of required shade complete as required : 100mm nominal dia

Providing, laying, testing & commissioning C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, SS nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with MS Angle support of size 50mm x50mmx5mm with epoxy primer and epoxy paint and painting with two or more coats of synthetic enamel paint over 2 coats primer of required shade complete as required : 80 mm nominal dia

Providing, laying, testing & commissioning C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, SS nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with MS Angle support of size 50mm x50mmx5mm and painting with two or more coats of synthetic enamel paint over 2 coats enamel primer of required shade complete as required : 65 mm nominal dia

Providing, laying, testing & commissioning C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, SS nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint over 2 coats enamel primer of required shade complete as required : 50 mm nominal dia

Providing, laying, testing & commissioning C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, SS nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint over 2 coats of enamel primer of required shade complete as required : 40 mm nominal dia

Providing, laying, testing & commissioning C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, SS nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint over 2 coats of enamel primer of required shade complete as required : 32 mm nominal dia

Providing, laying, testing & commissioning C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, SS nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint over 2 coats of enamel primer of required shade complete as required : 25 mm nominal dia

Supply,Installation,Testing & Commissioning of butterfly valve wafer type Stainless steel/SG iron disc , lever operated as per IS:13095 in PN 16 , teflon or nylong bushing, nitrile O-rings in standard mounting flanges with hand lever type with ISI mark.- 150mm dia

Supply,Installation,Testing & Commissioning of butterfly valve wafer type Stainless steel/SG iron disc , lever operated as per IS:13095 in PN 16 , teflon or nylong bushing, nitrile O rings in standard mounting flanges with hand lever type with ISI mark.-100mm dia

Supply,Installation,Testing & Commissioning of butterfly valve wafer type Stainless steel/SG iron disc , lever operated as per IS:13095 in PN 16 , teflon or nylong bushing, nitrile O-rings in standard mounting flanges with hand lever type with ISI mark.-80mm dia

Supply,Installation,Testing & Commissioning of butterfly valve wafer type Stainless steel/SG iron disc , lever operated as per IS:13095 in PN 16 , teflon or nylong bushing, nitrile O-rings in standard mounting flanges with hand lever type with ISI mark.-50mm dia (for drain line).

Supply,Installation,Testing & Commissioning of Non Return Valve wafer type swing check valve, short pattern type with integral hinge pin disc , nitrilerubber O - ring seat and face sealing as per IS: 5312 PN 16, with ISI mark.- 150 mm dia

Supply,Installation,Testing & Commissioning of Non Return Valve wafer type swing check valve, short pattern type with integral hinge pin disc , nitrilerubber O - ring seat and face sealing as per IS: 5312 PN 16, with ISI mark. - 100 mm dia

Supply,Installation,Testing & Commissioning of Non Return Valve wafer type swing check valve, short pattern type with integral hinge pin disc , nitrilerubber O - ring seat and face sealing as per IS: 5312 PN 16, with ISI mark.- 80 mm dia

Supply,Installation,Testing & Commissioning of Forged brass Ball Valve cast iron body as per IS 5312 with ISI mark- 20mm dia

Supply,Installation,Testing & Commissioning of Forged brass Ball Valve cast iron body as per IS 5312 with ISI mark- 25mm dia

Supply,Installation,Testing & Commissioning of sprinkler 15 mm , 1/2" BSPT end connection having temperature 68 degree C made out of forged brass and SS decorative finish with temperature sensing tube, pressure with standing minimum 8 kg/cm2 , UL listed.-Pendent type

Supply,Installation,Testing & Commissioning of pressure switch having 1/4" BSP (F) connection IP:32 enclosure protection, pressure range 0 to 200 psi with necessary contact

Supply,Installation,Testing & Commissioning Of Pressure Gauge, 4" SS Pressure Gauge 0.To 16kg Cm Glycerin Filled 1/2" Bsp Male Bottoms Connection Including Fittings Etc.

Supply,Installation,Testing & Commissioning of Air release valve gun metal body 25 mm dia

Supply,Installation,Testing & Commissioning of Air cushion vessel made of GI sheet 200 mm dia in 1 mtr height, with automaic air release cock, 25 mm drain valve and shutt off with all necessary attachments.

Supply,Installation,Testing & Commissioning of 150 mm CI Strainer For safer operation of pump- 150 mm dia

Supply,Installation,Testing & Commissioning Gun Metal Hydrant Valve- Single Headed, -as per IS: 5290 , ISI Marked oblique pattern Hydrant Landing valve with 80 mm dia flanged inlet and 63 mm dia instantaneous type female outlet complete with pvc blank cap & chain .

Supply,Installation,Testing & Commissioning of Controller percolated Fire Fighting Hose , Fire Hose - 63 mm ( 2 1/2") dia , 15 mtrs length bearing IS;636 type A with ISI Marked duly bounded with S.S couplings, 63 mm size, pair of male & female parts, instantaneous type , heavy duty bearing IS:903 with ISI mark.

Supply,Installation,Testing & Commissioning of Hose reel drum made of Mild Steel, Hose Reel Drum - as per IS:884 with 30 mtr length rubber hose of working pressure 7 kg/cm2 and un Metal shutt off nozzle range of jet flow 24 ltr/min, range of jet throw 6 mtrs with ISI mark.

Supply,Installation,Testing & Commissioning of Branch Pipe- S.S 63 mm dia short size branch pipe with 20 mm dia bore nozzle , as per IS:903 with -ISI Marked

Supply,Installation,Testing & Commissioning of Hose Box (cabinet) to accommodate one piece of 63 mm dia fire hose along with one pair of 63 mm dia male & female couplings and one branch pipe. The cabinet is made of Fibre sheet with glass fronted hinged doors and lock.

Supply,Installation,Testing & Commissioning of Gun Metal Fire brigade Inlet connection fabricated from 150 mm dia GI Class B medium grade pipe comprising of four 63 mm dia gun metal male threaded non return valve. ( 4 Way )

Supply,Installation,Testing & Commissioning of Fire brigade Inlet connection for tank filling fabricated from 150 mm dia GI Class B medium grade pipe comprising of three 63 mm dia gun metal male threaded non return valve.( 2 Way for tank filling )

Supply,Installation of Fire Extinguisher ball 150mm dia approved make. With powder coated MS stand

Supply,Installation,Testing & Commissioning of Fire Extinguisher dry chemical powder (ABC) Stored pressure type 4 kg capacity as per IS:15683 with ISI mark and with initial charger and installation brackets.

Supply,Installation,Testing & Commissioning of 6 kgs. Carbon Di-oxide Type, Gas Conforming to ‘IS 15222’, Cylinder Conforming to ‘IS 7285’ & PESO Approved, Controllable Discharge Mechanism, Discharge Hose & Horn, as per ‘IS 15683:2018’ with ISI Mark Fire Extinguishers Wheel type Valve Operating Temperature:- (-) 20oC to (+) 60oC

Supply of 2 Loop Addressable fire alarm Panel which consists of display board, 160(4 x40) Character LCD dispaly with Touch key pad, Mother board which will have ARM CORTEX M3 32 Bit Processor, Inbuilt RS-485 Networking Circuit for peer to peer networking, Inbuilt USB 2.0 Port for upload and download the Configuration tools, Two inbuilt programmable inputs, Two inbuilt NAC's, and Three Programmable Relays, and Loop Card circuits. power Supply ,Installation and Commissioning Board which will have SMPS fully protected board, which its operates on 120 to 220V AC ± 10% with 50/60 Hz, battery backup 24V DC with built-in charger. the panel have IP-50 rating Optional: for BMS integration thru MODBUS converter, Graphical Software, Software for TCP/IP Module, provision for GSM based Auto dialler,provision for printer thru compatible module, Approval: UL Listed,

Supply,Installation,Testing & Commissioning of Manual Call Point break glass type red colour powder coated MS/ABS box fix on existing wall /frame,24/12 Volt DC operated push OFF/ON switching mechanism with inner, outer frame, operation label and necessary attachments.

Supply,Installation,Testing & Commissioning of Audio alarm hooter (sounder ) powder coated MS/ABS box fix on existing wall/frame, 24/12 Volt DC operated siren circuit with diaphram speaker, maxium sound 60 db intensity under stautory with necessary attachments.

Supply,Installation,Testing & Commissioning of Monitor Module

Supply,Installation,Testing & Commissioning of Control Module

Supply,Installation,Testing & Commissioning of Flow switch

Supply,Installation,Testing & Commissioning of Sealed Lead Acid Battery 12 V DC x 7 Ah for fire alarm control panel.

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.

Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required.

SIGNAGES - Led type -Supplying and installing in position LED "EXIT"/Fire Exit sign boards of with 6 hrs battery backup.

Supply of fire exit sign boards in photoluminascent with the symbol and written as “FIRE EXIT” / "EXIT" in block letters with arrow markings with a contrasting colour in the background. SIZE 10CM X 30 CM

Supplying and installing in position of self glowing " FIRE DUCT" sign board of size 100mm x 300 mm made of luminescent safely, rigid sheet in green colour, photo luminescent rigid sheet with two each hanging chains & necessarry supports to hang it on ceiling.

Supplying and installing in position of self glowing " FIRE PUMP ROOM " sign board of size 100mm x 300 mm made of luminescent safely, rigid sheet in green colour, photo luminescent rigid sheet with two each hanging chains & necessarry supports to hang it on ceiling.

Supply & installing in position laminated sheet of " FIRE Assembly point " of suitable size fixed on wall & necessarry accessories to fix the plan on wall.

Supply & installing in position laminated sheet of "Way to Fire Assembly point ", Floor Identification, MCP, Fire Lift, of suitable size fixed on wall & necessarry accessories to fix the plan on wall.

Supplying and installing in position laminated sheet of "Fire Evacuation Plan". Providing wall mounting display board with double side 3mm thick imported acrylic sheet & glowsheet with SS Studs Digital color print on Traceperacy Sheets : Size 24"X18"

Supplying, installation, testing & commissioning talk back slave station in surface/recess suitable for operation on simplex mode complete with P.T.T. knob & speaker microphone enclosed in a M.S.(16 SWG)/ ABS box with break glass in front etc.complete as required : Talk back slave station in surface/recess suitable for operation on simplex mode complete with P.T.T. Knob & speaker/microphone enclosed in a M.S (16 SWG)/ABS.Box, break glass in front etc

Supplying, installing, testing &commissioning of 6W Wall Mount Speaker

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, 1.5 sqmm single core cable in the existing surface / recessed steel/ PVC conduit

Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess as required 20 mm.

Preparation of necessary documents , forms,drawings, scheme , certificate etc. Preparation of As built drawings. Procuring approvals for the drawings, cordinating site inspection and statutory sanctions from the state fire authority for the installation.(Fee for challan not including.)

Supply and installation of 3 star rated Non Inverter 5.5TR Ductable AC with necessary supports connecting to outdoor unit using cu pipe with sufficient drain system, sufficient stabilizer if required and hence complete

Supply and installation of 3 star rated 1.5TR Non Inverter Hi-Wall split AC with necessary supports connecting to outdoor unit using cu pipe with sufficient drain system, sufficient stabilizer if required and hence complete

Supply and installation of 5 star rated 1.8TR Inverter Hi-Wall split AC with necessary supports connecting to outdoor unit using cu pipe with sufficient drain system, sufficient stabilizer if required and hence complete

Supply and installation of 3 star rated 2TR Non Inverter Hi-Wall split AC with necessary supports connecting to outdoor unit using cu pipe with sufficient drain system, sufficient stabilizer if required and hence complete

Supply and installation of 5star rated 2TR Inverter Hi-Wall split AC with necessary supports connecting to outdoor unit using cu pipe with sufficient drain system, sufficient stabilizer if required and hence complete

Supply and installation of 3 star rated 2TR Non Inverter CASSETTE AC with necessary supports connecting to outdoor unit using cu pipe with sufficient drain system, sufficient stabilizer if required and hence complete

Supply and installation of 3 star rated 2.5TR Non Inverter CASSETTE AC with necessary supports connecting to outdoor unit using cu pipe with sufficient drain system, sufficient stabilizer if required and hence complete

Supply and installation of 3 star rated 2.5TR Inverter CASSETTE AC with necessary supports connecting to outdoor unit using cu pipe with sufficient drain system, sufficient stabilizer if required and hence complete

Supply and installation of 3 star rated 3TR Non Inverter CASSETTE AC with necessary supports connecting to outdoor unit using cu pipe with sufficient drain system, sufficient stabilizer if required and hence complete

Air Distribution System: Supply, Installation, Testing & Balancing of Air Disribution system consist of site fabricated rectangular duct Galvanized iron sheet metal ducting (Zinc coating 120 GSM) with TDF/TDC flanges(Outside duct shall be painted with black paint) - 22 Gauge

Air Distribution System: Supply, Installation, Testing & Balancing of Air Disribution system consist of site fabricated rectangular duct Galvanized iron sheet metal ducting (Zinc coating 120 GSM) with TDF/TDC flanges(Outside duct shall be painted with black paint) - 24 Gauge

Supply, installation and testing of 10 mm Thermal insulation of ducts using closed cell nitrile rubber insulation with selfe adhesives and sealed with black adhesive tape as per specification and relevant standards

Supply, installation and testing of accoustic lining of ducts using anti fungal open cell nitrile rubber insulation with recommended adhesives and as per specifications and relevant standards

Supply, Installation Canvas connection of fire retardant quality for connecting indoor unit to ducting / Plenum

Supply, Installation, testing and balancing of grilles of Aluminium construction with powder coated finish : Supply, Installation of 6 inch Air grilles with damper

Condensate Piping Supply and erection of the condensate UPVC pipes with all joints, reducers, necessary elbows and tees, supporting arrangements etc. Rate shall inclusive of thermal insulation with 13mm thickness FM approved closed cell nitrile rubber insulation covering with fire resistant fibre cloth fabric as a resistant to scratch and mechanical impacts - 25mm Dia UPVC

ODU STAND Supply and Installation of AC outdoor unit MS stand with suitable accessories for the following Machines - 1.5 TR SPLIT

ODU STAND Supply and Installation of AC outdoor unit MS stand with suitable accessories for the following Machines- 1.8 TR SPLIT

ODU STAND Supply and Installation of AC outdoor unit MS stand with suitable accessories for the following Machines- 2.0 TR SPLIT

ODU STAND Supply and Installation of AC outdoor unit MS stand with suitable accessories for the following Machines - 2.0 TR CASSETTE

ODU STAND Supply and Installation of AC outdoor unit MS stand with suitable accessories for the following Machines - 2.5 TR CASSETTE

ODU STAND Supply and Installation of AC outdoor unit MS stand with suitable accessories for the following Machines - 3.0 TR CASSETTE

ODU STAND Supply and Installation of AC outdoor unit MS stand with suitable accessories for the following Machines - 5.5 TR DUCTABLE

A.M.MOHAMMED ALI

Lee Builders

Vellapally Constructions