Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹1.4 Cr
EMD Value
₹1.4 L
Closing Date
20 Nov 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer, R&B Panchayat Division, Nadiad
Resurfacing of Shelgadh Bhimpura Aaghat Muvada Road Under MMGSY (N) 2026-27 Package No 08 ,Ta. Kapadwanj Dist:- Kheda
364642
14/2026-27
Open
Civil Works - Roads
Works
Nadiad
6 documents required · 6 mandatory
₹3,600
Executive Engineer, Panchayat (R and B) Division, NADIAD
₹1.4 L
7 Nov 2026
7 Nov 2026
7 Nov 2026
20 Nov 2026
7 Nov 2026
90 days
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
1 Clearing and Grubbing road land including 1.25 28393.04 Hect.
uprooting rank vegetation grass bushes,
shrubs, sapling and trees girth up to 300 mm
removal of stumps of trees cut earlier and
Disposal of Uunserviceable Materials (C) By
Mechanical means in Area of Light Jungle.
2 Earthwork for embankment including breaking 3782.00 126.68 Cum
clods, dressing with all lead and lift and
including watering rolling and consolidation of
subgrade in layers at O.M.C. to required dry
density including filling the depression which
occur during the process using power roller 8T
to 10T. (E) From Borrow area within Land
Width (upto 10 ton)
3 Providing, laying, and compacting Quarry 498.00 371.13 Cum
spall for Road side shoulders including
spreading in uniform thickness, including
rolling with vibratory roller 80-100 kN static wt.
to proper grade and camber including
watering etc. complete.
4 Providing and applying Tack coat, using VG- 15835.00 20.39 Sqmt
30 bitumen at the rate 2.50 Kg/10 Sqm on
B.T. surface including cleaning the surface
etc. complete
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
5 Providing & laying 37.50 mm thick Bituminous 1188.00 2641.66 M.T.
grout base course (BUSG) using B.T. stone
aggregate as per required gradation with
asphalt of VG-30 grade at the rate of 1.99 %
i.e. 19.90 Kg / M.T. including heating & mixing
in drum mix plant transporting the mix
spreading the same by paver finisher and
consolidation by vibratory roller as per
MORT&H specification including cost of all
materials fuel, labours, tools and plant etc
using contractors own drum mix plant etc.
6 Providing & laying 37.50 mm thick Bituminous 1307.00 3946.58 M.T.
macadam with VG-30 for tack coat @ 2.50 kg/
10 smt on BT surface using B.T. stone
aggregate as per required gradation with
asphalt of VG-30 at the rate of 3.40% i.e.
Kg/ M.T. by weight mix including heating &
mixing in drum mix plant transporting the mix
spreading the same by paver finisher and
consolidation by vibratory roller as per
MORT&H specification including cost of all
materials fuel, labours, tools and plant etc
using contractors own drum mix plant etc.
7 Providing & laying 20.00 mm thick Mix Seal 755.00 4986.47 M.T.
Surface (MSS) using specified graded
machine crushed aggregates with VG-30
grade bitumen at the rate of 5.1% i.e.
Kg/M.T. by weight mix including heating &
mixing in drum mix plant transporting the mix
spreading the same by paver finisher and
consolidation by vibratory roller as per
MORT&H specification including cost of all
materials fuel, labours, tools and plant etc.
comp. and flushind sand @ rate of 0.30 cmt/
8 Providing and fixing ordinary Kilometer stone 5.00 704.33 No.
of precast C. C. 1:2:4 including necessary
reinforcement as per I.R.C. type design in
C.C. 1:4:8 including painting, lettering etc.
complete (For O.D. road V.R.)
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
9 Providing and fixing Hectometer as per I.R.C. 17.00 356.50 No.
type design including painting, lettering etc.
complete. (ii) Fixing in C. C. 1:5:10
10 Providing and fixing indicator stone of 233.00 343.27 No.
approved stoneas per I.R.C. type design in
C.C. 1:4:8 including white washing etc.
complete. (ii) Fixing in C. C. 1:5:10
11 Providing and fixing guard stone as per I.R.C. 85.00 349.11 No.
type design including white washing etc.
complete.(ii) Fixing in C.C. 1:5:10
12 Cautionary Warning Sign :-Providing and 10.00 3218.09 No.
fixing sing boards made out of 2mm
aluminium sheet; size 90 x 90 x 90 cms.
equilateral triangle as per design of IRC-67-
1977. Pre treated with phospheting process &
acid etching; coated with one coat of epoxy
primer and two coats of best quality epoxy
paint ;reflectorised with retro
refiectivesheeting as per latest
M.O.S.T.Specifications; 3.1m long stand
postand frame fabricated from suitable
sizeiron angle of 35 x 35 x 3mm, 75 x 75 x
6mm as required; painted with bestquality
epoxy coatings in black andwhite bends. The
details of symbol foreach board shall be as
per theinstruction of engineer in charge. The
fixing at site shall be in 1:2:4 CC blockof size
45 x 45 x 60 Cms. for each leg.including
excavation, curing etc.complete under the
supervision of engineer in charge. (A)
Engineer Grade (VR)
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
13 Facility Informatory Sign :- Providing and 8.00 3741.44 No.
fixing sing boards made out of 2mm
aluminium sheet; size 80 x 60 cms. rectangle
as per the design of IRC-67-1977 pre treated
with phospheting process & acid teching;
coated with one coat of epoxyprimer and two
coats of best qualityepoxy paint; reflectorised
with retro refiective sheeting as per latest
M.O.S.T. Specifications; 3.1m long stand
postand frame fabricated from suitable
sizeiron angle of 35 x 35 x 3 mm 75 x 75 x
mm as required; painted with best
qualityepoxy coatings in black and
whitebends. the details of symbol for
eachboard shall details of symbol for
eachboard shall be as per the instruction
ofengineer in charge. The fixing at site shall
be in 1:2:4 CC block of size 45 x 45 x 60 cms.
for each leg. including excavation curing tec.
complete under the supervision of engineer in
charge. (A) Engineer Grade(VR)...
14 Regulatory / Mandatory signs :Providing and 6.00 3113.10 No.
fixing sing boards made out of 2mm
aluminium sheet; size 60 cms. diameter circle
as per the design of IRC-67-1977 pre treated
with phospheting process & acid eteching;
coated with one coat of epoxy primer and two
coats of best quality epoxy paint; reflectorised
with retro refiective sheeting as per latest
M.O.S.T. Specifications; 3.1m long stand post
and frame fabricated from suitable size iron
angle of 35 x 35 x 3 mm 75x75x6mm as
required; painted with best quality epoxy
coatings in black and white bends. the details
of symbol for each board shall be as per the
instruction of engineer in charge. The fixing at
site shall be in 1:2:4 CC block of size 45 x
x 60cms. for each leg. including excavation
curing etc. complete under the supervision of
engineer in charge.(A) Engineer Grade(VR)...
15 Providing and fixing Junction board of M.S. 3.00 5236.70 No.
plates and angles as per standard I.R.C.
design including fixingin C.C.1:4:8 with
necessary excavation painting figuring and
lettering on board etc. complete.
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
16 Chevron sign :-Providing and fixing sign 10.00 3711.75 No.
boards made out of 1.5 mm aluminium sheet /
3mm ACP (Aluminum composite Panel); size
60x50cm rectangular as per design of IRC-67-
2012. Pre treated with phospheting process
& acid etching; coated with one coat of epoxy
primer and two coats of best quality epoxy
paint ; reflectorised with High Intensity
Prismatic Grade retro refiectivesheeting of
Type-4 as per ASTM D-4956 and latest
M.O.S.T.Specifications; 3.3 mtr long stand
post of Iron Angle 75 x 75 x 6mm / 65NB
Circular MS Pipe as required and frame
fabricated from suitable size iron angle of 35 x
35 x 3 mm; painted with bestquality epoxy
coatings in black and white bends. the details
of symbol or inscription / numerals for each
board shall be as per the instruction of
engineer in charge. The fixing at site shall be
in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for
each leg including excavation, curing
etc.complete under the supervision of
engineer in charge. A warranty for 7 years for
the Retro reflective sheeting from original
manufacturer & a certified copy of 3 year
outdoor exposure test report from third party
test lab for the product offered shall be
submitted by contractor. (A) Class-B Type-4
Retro Reflective sheeting
17 Citizen' s information Board- Providing and 1.00 12266.65 No.
fixing of typical MMGSY information board as
per instruction. Two MS plates of 1.6 mm
thick, of 900 mm x 750mm size fixed at top &
bottom duly welded with MS angles of 25 x
25 x 5 mm thick M.S plate shall be welded by
two vertical M.S flats & four horizontal M.S
flates 5 mm thick to 75 mm x 75 mm of
SWG square tubes posts duly embedded in
cement concrete M-15 grade blocks of
600mm x 600mm x 75mm, below ground
level. Painting New letters & figure of any
shade with ready mixed synthetic enample
paint of superior quality in required shade and
colour, All sections of framed posts and steel
tube will be painted with primer and two coats
of epoxy paints as per drawing Clause
and Annexure 1700.1 (10.16)
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
18 MMGSY "LOGO" Board : Providing and fixing 1.00 4677.92 No.
of MMGSY LOGO informatory sign board with
Logo as per section 1700 of MORD
specifications and drawing. The board will be
a composite unit consisting of Two Plates of
ACM (Aluminum Composite Material),
material specifications as per clause 17001.3.
The top most plate will be of 3mm ACP in
diamond shape of 600x600mm size, riveted
with MS angle iron frame of
25mmx25mmx5mm size on back on edges.
The Lower plate will be of 4mm ACP of
1100x300mm size riveted with MS angle iron
frame of 25mmx25mmx5mm size on back on
edges. Riveting of all the sheets over angle
and flat iron frame will be done neatly to have
plain surface on one side. The angle iron
frame of Both the plates will be welded to a
75mm x75mmx6mm Mild steel post at Centre
and this post will be embeded in cement
concrete M15 grade block of
450x450x600mm below ground level. The
height of the bottom of the lower plate will be
1200mm from normal ground level. The
spacing between the diamond shaped plate
and Lower Plate is kept 150mm. MMGSY
logo, letters and numerals on the ACM should
be made up of Retro Reflective sheeting of
Type-1 AEGP Class-A grade as per the latest
MORD section 1700 and IRC 67-2012
specifications. Al the section of the frame and
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
19 MMGSY Project Information Board: Providing 1.00 8752.96 No.
and fixing of typical PMGSY Project
informatory sign board with Logo as per
of MORD specifications and drawing. The
board will be a composite unit consisting of
Three Plates ACM (Aluminum Composite
Material), material specificaitons as per clause
17001.3. The top most plate will be of 3mm
ACM in diamond shape of 600x600mm size,
riveted with MS angle iron frame of
25mmx25mmx5mm size on back on edges.
The middle 4mm ACM plate of will be
1200x150mm size riveted with MS angle iron
frame of 25mmx25mmx5mm size on back on
edges. The main 4mm ACM lower most plate
will be 1500mmx600mm size, riveted with MS
angle iron frame of 25mmx25mmx5mm size.
Riveting of all the sheets over angle and flat
iron frame will be done neatly to have plain
surface on one side. The angle iron frame of
lower most plate and flat iron frame of the
middle plate will be welded to two nos. 75mm
x75mm (12 SWG) sheet tubes posts placed at
1125mm apart centre to centre. the top of the
middle plate will be flushed with the top of
75mm dia medium steel tube posts and these
posts will be embeded in cement concrete
M15 grade block of 450x450x600mm below
ground level. The height of the bottom of the
lower plate will be 1200mm from normal
20 ground level and
Road marking the hot
with bottom of the
applied middle
thermoplastic 869.00 367.72 Sqmt
paints with reflectorising glass beads on
bitumin surface providing and laying a hot
applied thermoplastic compound 2.5 mm thick
including reflectorising glass beads @
250gms per sqm area, thickness of 2.5mm is
excluding of surface applied glass beds as per
IRC:35-2015. The finished surface to be level,
uniform and free from streaks and holes.
zebra patta /bump patta lane/center line/ edge
line/cut patta. The white color marking should
provide liminance coefficinet on cemend road
shalll be min 130 mcd/m2/lux and Asphalt
road shall be min 100 mcd/m2/lux during the
service life during the day time. The marking
should meet the performance criteria for night
time reflectivity, wet reflectivity and skid
resistance as mentioned in the section-15 of
IRC 35-2015. Warranty for the Retro
reflectivity should be two years.
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
21 Cat Eye / Road Stud / RPM: Supplying of 923.00 326.23 No.
Molded Twin Shanks Raised Pavement
Markers made of polycarbonate and ABS
moulded body and reflective panels with micro
prismatic lens capable of providing total
internal reflection of the light entering the lens
face and shall support a load of 13635 kgs.
tested in accordance to ASTM D 4280 Type H
and complying to Specifications of Category A
of MORTH Circular No RW/NH/33023/10-97
DO III Dt 11.06. 1997. The height, width and
length shall not exceed 20 mm, 130 mm and
130 mm and with minimum reflective area of
13 Sqcm on each side and the slope to the
base shall be 35 +/- 5 degree. The strength of
detachment of the integrated cylindrical
shanks, (of diameter not less than 19 +/-
mm and height not less than 30+/- 2 mm) from
the body is to be a minimum value of 500 Kgf.
Fixing will be by drilling holes on the road for
the shanks to go inside, without nails and
using epoxy resin based adhesive as per
manufacturers recommendation and The color
of the marker should be as per the IRC 35-
2015 and as directed by Engineer-in-charge.
Total Rs.
Rupees One Crore ThirtyNine Lakh EightyTwo Thousand Seven Hundred SixtyThree and Paisa
NinetySeven Only
Description of Item
Item Rate In
(with brief specification and reference to Quantity Unit Amount
No. figures
book of specifications)
I / We / am/are willing to carry out the work at ________________________________% above / below
percent (should be written in figure and words) of the estimated rates mentioned above. Amount of my/our
tender Works out as under.
Estimated Amount Estimated Amount
put to tender Rs. _________ put to tender Rs. _________
Deduct_______% below Add_______% above
Net Rs._________ Net Rs._________
in words ___________ in words ___________
1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the
Engineer-In-Charge for which no extra payment shall be made.
2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3 GST and Income tax TDS will be deducted at a source while making payments of bills.
4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.
G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in
R.C.C. items where there is a change as per actual mix design the cost of difference of cement
consumption have been deducted from the rate of original item at the rate of input rate mentioned in
all the tender.
5 Dismentalling of Credit materials amounting of Rs. -0.00 must be recovered from Contractor's
respective R.A. Bill.
Signature of Contractor
Dy. Executive Engineer Executive Engineer
Panchayat R.&B. Sub Division Panchayat R.&B.Division
Kapadwanj Nadiad
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
06 Specification -MMGSY 2026-27 Pkg No 08 Kapadwanj.pdf
BOQ Resurfacing of Shelgadh Bhimpura aaghat Muvada Road.pdf
Enviromental.pdf
General Specification.pdf
GR - 1.pdf
GR - 2.pdf
SBD Book MMGSY 2026-27 Pkg No 08 Kapadwanj.pdf
SPECIAL CONDITION - FMG - Resurfacing.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .