General Civil Maintenance Work of Viaduct, 06 Metro Stations (i.e. Apparel Park, Amraiwadi, Rabari Colony, Vastral, Nirant Cross Road and Vastral Gam) & Apparel Park Depot of East-West Corridor Reach-1 Section from Apparel Park to Vastral Gam Dead End, including Apparel Park Depot Line of Ahmedabad Metro Rail Project Phase - 1

BILL OF QUANTITIES

1.0 The Bill Quantities shall be read in conjunction with Notice Inviting Tenders, Instructions to tenderers,

Special Conditions of contract, Scope of Work, Technical Specifications etc.

2.0 Schedule ‘A’ consists of DSR items for Civil works & AMC/R&B SOR works as detailed in Tender documents.

Tenderer has to quote percentage above/below/at par the rates against BOQ amount given in Schedule ‘A’.

3.0 Schedule ‘B’ consists of Non DSR items for Civil works as detailed in Tender documents. Tenderer has to

quote percentage above/below/at par the rates against BOQ amount given in Schedule ‘B’

4.0 The rates and prices to be tendered in the unit Priced Bill of Quantities of Schedule ‘A’, ‘B’ are for completed

and finished items of works and complete in all respect. It will be deemed to include cost of all plants,

labour, supervision, materials, transport, all temporary works, erection, maintenance, utility identification,

contractor’s profit, taxes and establishment/overheads, together with preparation of design and drawings,

all general risks, insurance liabilities, compliance of labour laws and obligations set out or implied in the

5.0 The Summary Sheet of Bill of Quantity is given in Annexure – 1. The bidder may note that the quote shall

be inclusive of all taxes. The tax bifurcations is to be given in Annexure – 2 of the BOQ.

6.0 If the tenderer fails to quote rates against any item, the tender may be treated as incomplete and non-

responsive and shall be rejected.

7.0 Tenderers shall quote their offer in Indian Rupees (Rs.) only. Tenderers are required to quote percentage

(%) above/below/at par in figures in the appropriate highlighted cell in the summary sheet.

8.0 Errors will be corrected by the employer for any arithmetical errors in computation or summation as per

contract conditions.

9.0 All the unit rates/ percentages should be filled in figures. In case of any discrepancy, the value provided in

words shall be treated as sacrosanct.

10.0 The work executed against all the BOQ items in Schedule ‘A’ & ‘B’ as detailed in tender document would be

paid on measurement basis.

11.0 The contractor may raise their “On Account” payments on monthly basis as per the status of work on the

last day of the respective month.

12.0 In case of Schedule A item the description is given in brief and detailed description of item should be as

given in respective ie., DSR, AMC SOR, R&B SOR.

13.0 The financial bid is to be submitted online on https://tender.nprocure.com. The other relevant clauses of

submission of bid is clarified in ITT, Para / Clause D1 to D11

GMRC 2026 Page 2 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

FINANCIAL BID FORM

To : The Managing Director,

Gujarat Metro Rail Corporation (GMRC) Limited

Address : Block No.1, First Floor, Karmayogi Bhavan, Behind Nirman Bhavan,

Sector 10/A, Gandhinagar: 382010, Gujarat, India

Name of work: - “General Civil Maintenance Work of Viaduct, 06 Metro Stations (i.e. Apparel

Park, Amraiwadi, Rabari Colony, Vastral, Nirant Cross Road and Vastral Gam) & Apparel

Park Depot of East-West Corridor Reach-1 Section from Apparel Park to Vastral Gam Dead

End, including Apparel Park Depot Line of Ahmedabad Metro Rail Project Phase – 1.”

1. Having examined the site of works and Bid Documents, comprising Instructions to Bidders, Scope of

works, Conditions of Contract, Technical Specifications, Bill of Quantities I/we, the undersigned offer to

execute and complete such works and remedy any defects therein in conformity with the said bid

documents for the sum of Rs. (Refer Annexure – 1 ) or such other sum as may be ascertained in

accordance with the said Bid documents.

2. We undertake, if our Bid is accepted, to commence the work from issuance of LOA / receipt of the

order to commence the work, and to complete and deliver the sections and whole of the works

comprised in the Contract within the period (i.e. 24 Months) stated in the bid hereto.

3. If our Bid is accepted, we will furnish Performance Security (ies) in the form of a Bank Guarantee to be

jointly and severally bound on us, in accordance with the Conditions of Contract.

4. We agree to abide by this Bid for the period of One Hundred & eighty (180) days from the last date

fixed for Bid Submission and it shall remain binding upon us and may be accepted at any time before

the expiry of that period.

5. We confirm our agreement to treat the Bid documents and other records connected with the works as

secret and confidential documents and shall not communicate information contained therein to any

person other than the person authorised by the Employer or use such information in any manner

prejudicial to the safety and integrity of the works.

6. Unless and until an agreement is prepared and executed, this Bid, together with your written

acceptance thereof, shall constitute a binding Contract between us, but without prejudice to your right

to withdraw such acceptance without assigning any reasons thereof.

7. We understand that you are not bound to accept the lowest or any bid you may receive.

We attach herewith proof of submission of income tax returns along with profit & loss statement attached

with tax returns.

Yours faithfully,

Authorised Signature :

GMRC 2026 Page 3 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

Tender Notice No. : GMRC/CIVIL MAINTENANCE / REACH-1/PH-1/2026

“General Civil Maintenance Work of Viaduct, 06 Metro Stations (i.e. Apparel Park, Amraiwadi, Rabari Colony,

Vastral, Nirant Cross Road and Vastral Gam) & Apparel Park Depot of East-West Corridor Reach-1 Section from

Name of Works Apparel Park to Vastral Gam Dead End, including Apparel Park Depot Line of Ahmedabad Metro Rail Project

Annexure – 1 (i.e. Summary Sheet of Bill of Quantity)

Rate to be Quoted by the Tenderer

Sr. No Schedule

In Figures In Words

(% above/below) (% above/below)

(DSR/SOR Items)

(Non DSR Items)

Total Amount (INR) In Figures

Total Amount (INR) In Figures

(Inclusive of all taxes)

1.0 The tenderer shall quote a single percentage (Above/Below/At Par ) at SN. 1 & 2 of this Summary Sheet only and nowhere else.

2.0 The bidder’s quote to be filled in Annexure – 1 (i.e. Summary Sheet of Bill of Quantity), it should be inclusive of all taxes.

3.0. The tax bifurcations to be filled in Annexure – 2 (i.e. Details of Taxes and Duties).

GUJARAT METRO RAIL CORPORATION

GMRC 2026 Page 4 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

Bill of Quantity

“General Civil Maintenance Work of Viaduct, 06 Metro Stations (i.e. Apparel Park, Amraiwadi, Rabari Colony, Vastral, Nirant

Name of Cross Road and Vastral Gam) & Apparel Park Depot of East-West Corridor Reach-1 Section from Apparel Park to Vastral Gam

Work: Dead End, including Apparel Park Depot Line of Ahmedabad Metro Rail Project Phase – 1.”

SN. Schedule - A Unit Qty Rate Amount

All item of work which are not covered in BOQ but are required to be carried out as per

direction of Engineer, will be based on list of concerned item as available in latest Schedule of

Rates (SOR) of work.

i. Schedule of Rates DSR -2023 CPWD

ii. Schedule of Rates of SCHEDULE OF RATES FOR BUILDING WORKS AHMEDABAD CITY (AMC)

YEAR:-2023-24 issued by GOVERNMENT OF GUJARAT ROAD AND BUILDING DEPARTMENT.

iii. SCHEDULE OF RATES FOR BUILDINGS, ROADS & BRIDGES WORKS OF AHMEDABAD DISTRICT

for the year 2023-24 of Road & Building (R&B) Department of Government of Gujarat.

iv.Delhi Schedule of Rates (E&M)

v.Delhi Schedule of Rates (mechanical)

Note:The order of preference for adopting the Rates will be in accordance with as first

preference being at (i) and the last preference being at (iii) above, till the availability of

concerned items in the respective schedule of Rates.

Total of Schedule-A

GMRC 2026 Page 5 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

1 NDSR-1 Providing & fixing 10mm dia stainless steel tower bolt 200mm long with all screws Each ₹

etc. complete as directed by engineer

Providing & fixing of stainless steel L-drop 12 inch with all nuts, screws drilling by

2 NDSR-2 employing skilled carpenter in non-fire door along with a pad lock (pad lock make; Each ₹

Harrisons or its equivalent) all complete as per the direction of Engg-in-

3 NDSR-3 Providing and fixing stainless steel D-shaped door handle as confirming to grade Each ₹

304.(Minimum length of 200 mm to pair

250mm, Make-dorma or equivalent) complete as per direction of engineer in charge.

4 NDSR-4 Providing and fixing chromium plated brass 100mm mortice latch and lock with 6 Set ₹

levers and a pair of lever

handles of approved quality with necessary screws etc. complete.

5 NDSR-5 Providing and fixing Aluminium door stops/wall stoppers to flush doors or panelled Each ₹

solid and glazed doors, etc., Shutter

complete as per drawings and directions of engineer in charge.

Providing and fixing aluminium extruded section body tubular type universal

6 NDSR-6 hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, each ₹

door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm),

with double speed adjustment with necessary accessories and screws etc. complete.

GMRC 2026 Page 6 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

7 NDSR-7 Providing & fixing EL Bihari hinge in aluminium door /window Each Set ₹

8 NDSR-8 Providing & fixing of aluminium handle set with locking arrangement for aluminium Each ₹

window shutter as per approved

quality with required screws complete as per direction of Engineer-in-Charge.

Providing and fixing of high pressure laminated board confirming to code BS EN-438-

9 NDSR-9 2015 of 12mm thickness for partition and doors with all necessary fittings, fasteners, Sqm ₹

screws and rubber strip for the groove in the plaster for reducing noise level of door

closing etc. required as per approve design and colour, complete as per direction of

engineer in charge.

Spraying and applying aldrine for anti-termite treatment of wall doors and wooden

cupboard /almirah and kitchen cabinet. Aldrine to be sprayed on wall by making hole

10 NDSR-10 using drilling machine and on doors & wooden cupboard/almirah and kitchen cabinets Each ₹

by injection/gun/applicator. Work will be carried out in presence of qualified

supervisor to ensure safety of applicator and other staff as well as residents of the

flats. Rates are inclusive of all required material, machine, gun and all skilled and

unskilled labour, lead and lift, ascent-decent complete as per direction of Engineer-in-

Applying general insecticide pest control treatment to floors, cupboards etc

including labour materials etc. complete. Using Imidacloprid 30.5 SCas Per IS

part -II( (0.075% concentration by mass) is recommended 10.5ml chemical diluted

11 NDSR-11 with 5 liters SMT ₹

of water application 0.5 litre chemical /Sqm of surface is recommended as per I.S.

GMRC 2026 Page 7 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

Carring out plinth treatment to post construction / existing structure by spraying

chemical solution for termite control treatment including labour and material

consistment with I.S.I specification. Using Chlordene and Chiorpurfiles 20 EC. As Per

12 NDSR-12 6131_paret-II Consentration Weight one percent is recommended i.e one litre 20 EC SMT ₹

chemical emulsion with 19 liter give 1 % concrentration inclusive of one litre

chemical emulsion appication at the rate of 5 Litre chemical / Sqm of surface is

recommended as per I.S

Carrying out wall treatment for termite control including spraying with chemical

solution in oil base including labour and material Using Chlorpyriphos 20 ECAs per IS

6313 part - II (1% concentration by mass) is recommended i.e one litre chemical

13 NDSR-13 emulsion diluted with 19 liter oil base. Total solution will be 20 liters inclusive of SMT ₹

one liter chemical emulsion application at the rate of 7.5 litre

chemical / Sqm of surface is recommended as per I.S.

Providing and fixing panic bar / latch (Double point) fitted with a single

14 NDSR-14 body, Trim Latch & Lock on back side of the Panic Latch of reputed brand Nos ₹

and manufacture to be approved by the

Engineer- in- charge, all complete.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,

channels, plates etc., including welding, grinding, buffing, polishing and making

curvature (wherever required)

15 NDSR-15 and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing Kg ₹

the railing with necessary accessories & stainless steel dash fasteners , stainless steel

bolts etc., of required size, on the top of the floor or the side of waist slab with suitable

arrangement as per approval of Engineer-in-charge, (for payment purpose only weight

GMRC 2026 Page 8 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

of stainless steel members shall be considered excluding fixing accessories such as

nuts, bolts, steners etc.).

Providing and fixing hand rail of approved size by welding etc. to steel

16 NDSR-16 ladder railing, balcony railing, staircase railing and similar works, Kg ₹

including applying priming coat of approved steel primer.

Steel work in built up tubular (round, square or rectangular hollow tubes

17 NDSR-17 etc.) trusses etc., including cutting, hoisting, fixing in position and Kg ₹

applying a priming coat of approved steel primer, including welding and

bolted with special shaped washers etc. complete.

Hot finished welded type tubes

Sr No Sub-Schedule- B.2 (Toilet/Washroom/Plumbing/PHE) Unit Rate

18 NDSR-18 Providing and fixing of CI grating 200x200 mm with all required materials and labour Each ₹

complete as per direction of Engineer-in-Charge, nothing shall be paid extra.

19 NDSR-19 Providing and fixing Floor trap Stainless Steel jali over existing floor trap. Nos ₹

20 NDSR-20 Providing and fixing white vitreous china pedestal type water closet (European type Each ₹

)with seat and lid, 10 litre low white various china flushing system & C.P flush bend

with fittings & C.I Basets, 40mm flush bend, overflow arrangement with special of

standard make and mosquito proof coupling of approved municipal design complete

GMRC 2026 Page 9 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

, including painting of fittings and brackets, cutting and making good the walls and

floors wherever required.

21 NDSR-21 Providing and fixing Flushing Cistern (Make - Hindware or Equivalent) Cat. No. 21001 Each ₹

22 NDSR-22 Providing and fixing wash basin with C I brackets, 15 mm C. P. brass pillar taps, 32mm Each ₹

C.P. brass waste of standers pattern including painting of fittings and brackets , cutting

and making good the walls wherever require. White Vitreous China wash basin size

630x450 mm with a pair of 15mm Cc.P brass pillar taps

23 NDSR-23 Providing and fixing Angle Valve (Make - Jaquar or Equivalent) Code: FLR-5053N Each ₹

24 NDSR-24 Providing and fixing Bib Cock (Make - Jaquar or Equivalent) Code: FLR-5037N Each ₹

25 NDSR-25 Providing and fixing Pillar Cock (Make - Jaquar or Equivalent) Code: PRS-031 Each ₹

26 NDSR-26 Providing and fixing of jet spray with flexible tube made of Volga or approved quality. Each ₹

27 NDSR-27 Providing and fixing of bib cock with health faucet with flexible pipe of appropriate Each ₹

length with a separate stop cock for the health faucet. The cost to include all fittings

and fastenings all complete as required

28 NDSR-28 Providing and fixing PVC Connection (Make - Jaquar or Equivalent)Code: ALD-805 Each ₹

29 NDSR-29 Providing and fixing white vitreous china flat back or wall corner type lipped front Each ₹

urinal basin of 430x260x350 mm size with automatic flushing cistern with standard

flush pipe and C.P brass spreaders with brass unions and GI clamps complete,

including painting of fittings and each brackets cutting and making good the walls and

GMRC 2026 Page 10 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

floors wherever required. One urinal wash basin with 5 litre white PVC automatic

flushing cistern

30 NDSR-30 Providing and Fixing of WC seat Cover , complete with all accessories required as per Each ₹

direction of Engineer-in-charge.

CERA make (B1510108) or equivalent

31 NDSR-31 Testing of potable water as per the standard of local (As per IS 10500) water supply Each ₹

authority (I/c supplying of water sample to the laboratory) and providing the sample

test report to EIC.

32 NDSR-32 Cleaning of underground water tank of all the sections/Capacity of tank by emptying Per Tank ₹

of water in other tanks or in a separate storage device to avoid the wastage of water.

The rates are inclusive of all taxes, men, materials, safety equipments and other

required resources. Nothing shall be paid extra and work shall be paid extra and work

shall be carried out as per direction of Engineers in charge. The tank shall be cleaned

on half yearly basis and report shall be submitted to GMRC.

33 NDSR-33 Providing and fixing UPVC soil and waste pipes ISI marked / SWR with solvent cement

/ rubber ring joints and further protected with fibreglass paste, including all specials

such as bends, tees, reducers etc with or without door as required, including any

cutting and making good of floors / walls that may be necessary, clamps and stays as

per requirements. The pipes laid above the floor level (sunken level) should be rigidly

fixed with PCC bedding and levelled at every one metre intervals

34 NDSR-33.1 [A] 50mm Dia 6 Kg/cm2 Rmt ₹

35 NDSR-33.2 [A] 75mm Dia 6 Kg/cm2 Rmt ₹

GMRC 2026 Page 11 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

36 NDSR-33.3 [B] 110mm Dia 6 Kg/cm2 Rmt ₹

37 NDSR-33.4 [C] 160mm Dia 6 Kg/cm2 Rmt ₹

38 NDSR-34 PVC PIPE 160 MM: Providing and laying 160mm dia & 6kg pressure PVC pipe for Rmt ₹

drainage, all work complete as directed by engineer in charge. (make - as per approved

39 NDSR-35 Providing and fixing PVC P-trap /multi-trap /Nahani-trap of 110mm dia for kitchen Each ₹

/bathroom with demolishing of kota stone/cement concrete flooring of required area

or up to 1.0 sqm for rectification of seepages and repairing the same as above,

including the cost of materials i.e. PVC P-trap/multi-trap/Nahani trap, solvent, piece

of PVC pipe, Kota stone, cement concrete or other materials, labour charges, taxes

etc. complete as per direction of Engineer-in-charge.

40 NDSR-36 Providing and fixing UPVC/CPVC ball valve of approved quality, High or low pressure

,with plastic floats complete as directed by engineer in charge.

41 NDSR-36.1 20 mm nominal bore Each ₹

42 NDSR-36.2 25 mm nominal bore Each ₹

43 NDSR-36.3 32 mm nominal bore Each ₹

44 NDSR-36.4 40 mm nominal bore Each ₹

GMRC 2026 Page 12 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

45 NDSR-36.5 50 mm nominal bore Each ₹

46 NDSR-36.6 65 mm nominal bore Each ₹

47 NDSR-37 Mirror of staff toilet - Providing and fixing toilet mirror made of 6mm thick BWP ply Sqm ₹

with craft paper fixed to wall with screws/wooden plugs 5mm thick float glass mirror

etc. including all necessary arrangement complete as per direction of engineer in

charge. (Make - as per approved list).

48 NDSR-38 Providing and fixing vitreous toilet paper holder of vitr with mortar / white cement Nos ₹

with all fittings and fastenings all complete as required

49 NDSR-39 Providing and fixing of CP grab rail in PWD Toilet. The cost to include all fittings and Nos ₹

fastenings all complete as required

50 NDSR-40 Providing and fixing Urinal Partition of 20mm thick of approved material granite as Nos ₹

specified. The cost shall include all fittings and fastenings all complete as required

Providing and fixing automatically operated Hand Dryer with in-built heating unit and

51 NDSR-41 Nos ₹

twin blowers of NovoTech or equivalent make

Cleaning of terrace/loft water storage tank (inside surface area) upto

2000 litre capacity at all heights with coconut brushes, duster etc.,

removal of silt, rubbish from the tank and cleaning the tank with fresh

52 NDSR-42 water disinfecting with bleaching powder @ 0.5gm per litre capacity litre ₹

of tank including marking the date of cleaning on the side of tank

body with the help of stencil and paint and disposing of malba all

complete as per direction of Engineer-in-Charge. (The old date already

GMRC 2026 Page 13 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

written on tank should be removed with paint remover or black paint

and if date is not written with the stencil or old date is not removed

deduction will be made @ Rs. 0.10 per litre) (if during cleaning any

GI fittings or ball cock is damaged that is to be repaired by contractor

at his own cost and nothing extra will be paid on this account)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply including all CPVC plain & brass threaded fittings

53 NDSR-43 This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching,

refilling & testing of joints complete as per direction of Engineer in Charge.

54 NDSR-43.1 [A] 15 mm. Rmt ₹

55 NDSR-43.2 [B] 20 mm. Rmt ₹

56 NDSR-43.3 [C] 25 mm. Rmt ₹

57 NDSR-43.4 [D] 32 mm. Rmt ₹

58 NDSR-43.5 [E] 40 mm. Rmt ₹

59 NDSR-43.6 [F] 50 mm. Rmt ₹

Supply and Fixing PVC floor trap 125 x 75mm self-cleansing design with or without

60 NDSR-44 vent arm, Inlet receiving cap of 50 & 40mm dia complete Including cutting and making Nos ₹

good the walls and floors

61 NDSR-45 Supply of materials & Constructing brick masonry Rain Water Chambers with

!!. 'A' class Table Molded bricks in cement mortar 1:S (1 cement: 5 fine sand),

GMRC 2026 Page 14 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

!. R.C.C. Top slab"wlth 1:2:4 Mix (1 Cement: 2 coarse sand: 4 graded stone

,s aggregate), foundation concrete

62 NDSR-45.1 Inside size of 600 x 600 depth of 600mm with RCC cover Each ₹

Supply installation testing and commissioning water cooler having nominal cooling

capacity of 40 liters per hours, with 40 liters storage tank with 2 nos. of faucets, one

no goose neck type (for glass filling) and other one fountain type {for drinking} both

63 NDSR-46 Set ₹

with separate mechanical lever control with 1.5 HP electric otor for compressor to

work on one phase 230 volts SO Hz AC power supply WI th complete accessories

including cutting and making wall as required.

Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated

high pressure suction cum jetting sewer cleaning machine fitted with pump having

4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled

64 NDSR-47 operator, supervising engineer etc. for cleaning and partial desilting of manholes and Metre ₹

dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole

to another by high pressure jetting system of 2200 PSI for sewer line from 150 mm dia

Sub-Schedule-B.3 (ACP/Rolling Shutter)

Providing and fixing (Aluminium Composite Panel) Sheet any colour on existing frame

as per requirement all complete in all respect as per direction and satisfaction of

65 NDSR-48 sqm ₹

Engineer-in-Charge

4mm thick ACP (FR grade) of Aludecor ALAS color AD09

GMRC 2026 Page 15 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

Annual repairing and maintenance of exixting rolling shutters including dismentaling

shutter and refinig the same and fixing of new items as per requirement including

cleaning,oiling,greasing,alignment and testing complete.The cost of new items will be

66 NDSR-49 Each ₹

paid separatly except small hardware like nuts/bolts and nails which are included in

this item.The scopre of work includes checking of shutters for smooth functioning

quarterly or as & when requires in emergency.

Providing hardware or other parts for smooth functioning of rolling shutter, items

will be supplied as per CPWD specifications.

68 NDSR-50.1 Brackets (sides) Each ₹

69 NDSR-50.2 Each ₹

70 NDSR-50.3 Each ₹

MS-Gararee device

71 NDSR-50.4 Each ₹

72 NDSR-50.5 Gear -Box Each ₹

73 NDSR-50.6 Rolling shutter Handle Each ₹

74 NDSR-50.7 Locking Naka/Kundee including welding Each ₹

75 NDSR-50.8 Ball Bearing Each ₹

GMRC 2026 Page 16 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

76 NDSR-50.9 Gararee Rod Each ₹

77 NDSR-50.10 MS-Top Cover Mtr ₹

78 NDSR-50.11 Bottom Locking rail Mtr ₹

79 NDSR-50.12 M.S. Lathe Mtr ₹

MS pipe shaft 2" dia

80 NDSR-50.13 Mtr ₹

81 NDSR-50.14 Side guide rail Mtr ₹

82 NDSR-50.15 MS Grill (for existing pattern) Sqm ₹

83 NDSR-50.16 Rolling shutter lever lock Each ₹

Oiling & greasing, repairing and welding of rolling shutter with accessories fittings all

84 NDSR-51 Each ₹

work completed as per direction of engineer in charge.(Accessories will be paid extra).

Sub-Schedule-B.4 (Carriage/Disposal)

Supply of canter on hire charges basis, for carriage of any material from metro stations

85 NDSR-52 Each ₹

to GMRC depots.

GMRC 2026 Page 17 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

Clearing grass / bushes from ground level with the help of tractor mulcher

assembly/talwar/ hand held grass / bush cutting machine including machine operator,

86 NDSR-53 fuel and all kind of blades required for cutting grass stems of bushes upto 5 cms dia at Sqm ₹

a height of 15 cms from ground level and disposal of material so cleared within 50m

lead and as per satisfaction of E-I-C.

Disposal of Malba away from the premises through Dumper. Rates are for each trip.

87 NDSR-54 Per Trip ₹

(Minimum quantity of Malba = 8 cum).

Sub-Schedule-B.5 (Core Cutting/Expansion Joint/Grouting/Cold

Bitumen/Waterproofing/PCC)

88 NDSR-55 Core cutting as per direction of engineer incharge

a) Core cutting work in RCC structure(Vertical as well as horizontal) -50 MM

b) Core cutting work in RCC structure(Vertical as well as horizontal) -100 MM Inches

Providing and fixing Hilti Chemical fastener HIT-V-5.8, M12x220mm of 12mm dia.

91 NDSR-56 including injecting HIT-RE 500 V3 chemical grout using injection gun including drilling Each ₹

of hole in RCC, concrete or brick masonry, cleaning the hole with pump, fixing the

GMRC 2026 Page 18 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

fastener, injecting the chemical etc. as per direction of Engineer-in-Charge (Work

during block hours in night) rates are inclusive of GST and Carriage.

Providing, cutting and fixing Hilti chemical fastener M16x200mm with HILTI chemical

grout RE 500 V3 including drilling of hole in RCC, Concrete or brick masonary, cleaning

92 NDSR-57 Each ₹

the hole with blow out pump, fixing the fastener with chemical grout using chemical

injecting gun etc. complete as per direction of Engineer-in-charge.

Applying bonding agent on old surface of concrete including cleaning and preparation

93 NDSR-58 per set ₹

of surface with all T&P. (make - as per approved list ).

Expansion Joint: Compression seal joint

Providing and installing compression seal joint confirming to specification including

94 NDSR-59 provision of edge beams at end edges of both at joining precast diaphragm segments, RM ₹

cast in situ units and all related operations as required to complete the work as

specified in specifications.

Cleaning of existing joints (Expansion dummy and construction joints) by removing old

existing sealing compound by kerosene oil, drying with blow lamp and filling again

95 NDSR-60 Mtr ₹

with Polysulphide Sealant of approved make including painting the sides of slabs with

primer of approved make complete as per satisfaction of Engineer-in-charge.

Providing , placing and pasting Silicone Sealant WX of approved make for sealing the

surface of concrete to aluminium, aluminium to glass , aluminium to aluminium,

96 NDSR-61 Mtr ₹

aluminium to masonry surface etc. With preparing the surface and placing the sealent

with the help of gun ,complete in all respect as per satisfaction of E.I.C.

GMRC 2026 Page 19 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

Providing and pasting of Sika multiseal tape 100 mm wide at all locations including all

97 NDSR-62 T&P, labour etc for cleaning the surface, applying the tape all complete as per Mtr ₹

direction of EIC.

Providing and supplying CICO Grout V1, premixed ultra high strength non-shrink

98 NDSR-63 Bag ₹

cementitious grout or equivalent as approved by Engineer-in-Charge.

Supplying of micro concrete chemical in 25 kg per bag make as per approved list of

99 NDSR-64 Each ₹

Supplying Cold Bitumen to site as per per dirction of Engineer-in-Charge Each

101 NDSR-66 PROVIDING AND LAYING SBR POLYMER AND CEMENT MIXTURE (1:3) Sqm ₹

PROVIDING AND LAYING APP MODIFIED POLYMERIC MEMBRANE (3 MM THICK,

102 NDSR-67 Sqm ₹

REINFORCED WITH GLASS FIBRE MATT)

Providing and applying polysulphide sealant including cost of backer rod and

103 NDSR-68 application of primer of different location as per direction of Engineer-in-Charge for RM

groove of size 80mm width

Providing, mixing and applying SBR polymer (of approved make) modified Cement

in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by

104 NDSR-69 wt. of

cement used) as per specifications and directions of Engineer-in-charge.

Note: Measurement and payment: The pre-measurement of thickness shall be done

GMRC 2026 Page 20 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

the surface preparation is completed and Payment under this item shall be made only

proper wet curing has been done and surface has been satisfactorily evaluated by

/ tapping with a blunt metal instrument and/or the 75mm size cube crushing strength

end of 28 days to be not less than 30 N/Sqmm2).

105 NDSR-69.1 12 mm average thickness. Sqm ₹

106 NDSR-69.2 25 mm average thickness in 2 layers. Sqm ₹

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded

107 NDSR-70 stone Cum ₹

aggregate 40 mm nominal size derived from natural sources)

Sub-Schedule-B.6 (Carriage/Disposal)

108 NDSR-71 Providing & fixing in position glass

109 NDSR-71.1 5 mm thick heat reflecting glass Sqm ₹

110 NDSR-71.2 Extra for toughening 5 mm thick clear float glass Sqm ₹

GMRC 2026 Page 21 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

Providing and fixing 6mm-10mm thick clear float glass in aluminium door, window,

ventilator, shutter and partitions etc. with PVC and neoprene gasket etc. complete as

111 NDSR-72 per architectural drawing and as per the directions of engineer in charge. (make - as Sqm ₹

per approved list)

Providing and fixing of structural toughened glass 13.52 mm( 6.00+1.52+6.00) in all

locations of metro stations including the cost of sealing gaps with clear / coloured

112 NDSR-73 sealant / silicon of approved make and brand, cutting of groove (wherever required ) Sqm ₹

including fixtures & fitings etc. complete as per site requirement. ( make- as per

Providing and replacing 1000 mm TO mirror, covered with powder coated covering

having sun shade to existing hanging member support from station roof/floor at the

113 NDSR-74 Each ₹

location as directed by Engineer- in - charge. Rates are inclusive of all material, labour,

scaffolding, cartage and all taxes etc. all complete.

Providing and fixing toughened glass in partitions ,doors, faced, counter etc.

supported at bottom and sides with all necessary fitting

114 NDSR-75 and fixture of approved make the glass to be fixed in wall/S.S pipe/M.S framed

structure as per approved design complete as per direction of EIC(frame work and

fittings to be paid separately and for payment glass area only will be measured)

115 NDSR-75.1 a) 12 mm thick toughened glass Sqm ₹

116 NDSR-75.2 b) 10 mm thick toughened glass Sqm ₹

117 NDSR-75.3 c) 8 mm thick toughened glass Sqm ₹

GMRC 2026 Page 22 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

118 NDSR-75.4 d) 6 mm thick toughened glass Sqm ₹

Sub-Schedule-B.7 (False Ceiling/Flooring/Granite)

Providing and fixing tiled false ceiling of approved materials of size 595 x 595 mm in

true horizontal level, suspended on inter locking metal grid of hot dipped galvanized

steel sections (galvanized @ 120 grams /sqm, both side inclusive) consisting of main

"T" runner with suitably spaced joints to ger required length and of size 24 x 38 mm

made from 0.30mm thick (minimum) sheet, spaced at 1200mm centre to centre to

form a grid of 1200 x 600mm and secondary cross "T" of length 600mm and size 24x25

mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the

x 600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3mm

and laying false ceiling tiles of approved texture in the grid including, required

119 NDSR-76 cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke sqm ₹

detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats

of size 27x37x25x1.6mm fixed to ceiling with 12.5 mm dia and 50 mm long dash

fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size

85x30x0.8mm spaced at 1200mm centre to centre along main T, bottom exposed

width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete

for all heights as per specifications, drawings and as directed by Engineer-in-charge.

Providing and fixing of Flex alum metal tile ceiling system manufactured by M/s.

Hunter Douglas India Pvt. Ltd or equivalent comprising of tile of 600 mm wide and

mm long manufactured out of 0.50mm thick GI perforated for desired openings and

patterns giving a 22% open area. The tile will be manufactured on advanced

GMRC 2026 Page 23 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

equipment that includes several levelling stages in the manufacturing process. Tile

ends will be raised with pips and stops to ensure positive engagement into the spring

to enable for de-mounting of individual panels. The tile sides will be sufficiently high

to ensure a minimum deflection across the length of tile. All tiles will be bevel edged.

The tile shall be polyester based, powder coated in white colour. The tiles shall be

clipped into clip in profile of 0.50 mm thick G.I. The clip in profile shall be supported

from slab by means of rigid suspension of 4 mm G.I. rod hold on clamps with clip.

Providing and fixing aluminium lineal ceiling using 84 mm x 16 mm deep, aluminium

alloy AA 3105 with panel ceiling, type 84 R Exterior grade, manufactured by Hunter

Douglas/ Interarch Building Products Ltd. or approved equivalent in approved colour

and enamelled aluminium panel carriers of satin black colour, panel carriers

suspension system, including cut-outs and additional framing around light fixtures,

120 NDSR-77 grilles, diffusers, access panels, etc. all as per specifications and as directed complete. sqm ₹

Rates shall be inclusive of linear cell panels, Horizontal and vertical suspension, Grid

elements, Perimeter trims, Carriers, wire clips and all other accessories etc. complete

inclusive. The carrier spacing shall not exceed 1 metre centre to centre and these will

be suspended at every 800 mm centre to centre. It includes a. Coil Coated finish or b.

Powder coated finish

Providing and fixing in position GI Gutter of 2mm thick sheet of approved quality

including fabrication and erection with self tapping screws epdm washers with

121 NDSR-78 necessary laps and stiffeners, application of sealant, making provision for drainage Sqm ₹

spout with all leads and lifts etc. Complete as per drawing and specifications. (

Measurement to be as per profile area)

GMRC 2026 Page 24 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

Providing and fixing removable raised/ false access flooring with system and its

components of approved make for different plenum height with possible height

adjustment upto 50mm, comprising of modular load bearing floor panels supported

on G.I. rectangular stinger frame work and G.I. Pedestal etc. all complete, as per the

architectural drawings, as specified and as directed by Engineer-in-charge consisting

of:a) Providing at required spacing to form modular frame work, pedestals made out

of GI tube of thickness minimum 2 mm and 25mm outer diameter, fully welded on to

the G.I. Base plate of size 100mm X 100mm X 3mm at the bottom of the pedestal tube,

G.I. pedestal head of size 75mm x 75mm x 3.5mm welded with GI fully threaded stud

16mm outer diameter with two Gi check nuts screwed on the stud for level

adjustment upto 50mm, locking and stabilizing the pedestal head in position at the

required level. The pedestals shall be fixed to the subfloor (base) through base plate

122 NDSR-79 using epoxy based adhesive of approved make or the machine screw with rawl plug.b) Sqm ₹

Stringers system in all steel construction hot dipped galvanized of rectangular size

570x20x30x0.80mm thick having holes at both ends for securing the stringers on to

the pedestals head using fully threaded screws ensuring maximum lateral stability in

all directions, the grid formed by the pedestal dns stringer assembly shall receive the

floor panel, this system shall provide adequate solid, rigid support for access floor

panel, the system shall provide a minimum clear uninterrupted clearance between

the bottom of the floor for electrical conduits and wiring etc. all complete as per the

architectural drawings, as specified and as directed by the Engineer-in-charge.c)

Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled steel

antistatic high pressure Lamination of 800H grade (FS800H). Access Floor panel shall

be steel welded construction with an enclosed bottom pan with uniform pattern of

64 hemispherical cones. The top and bottom plates of steel Gauges : top 0.6mm and

bottom 0.7mm fused spot welded together (minimum 64 welds in each dome and

GMRC 2026 Page 25 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

welds along each flange). The panel should be Corroresist epoxy coated for lifetime

rust protection and cavity formed by the top and bottom plate is filled with Pyro grip

non-combustible Portland cementitious core mixed with lightweight floaming

compound. The access floor shall be factory finished with Anti-static High Pressure

laminate with Non Warp technology upto 1mm thickness for superior adhesion and

Surface flatness within 075mm. The panel is to withstand a Concentrated Load of

kgs applied on area 25mm X 25mm without collapse in the panel which is placed on

four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL)

minimum 1500 kg/sqm and an impact load of 50kg all complete as per the approved

manufacturers specification and as per the direction of Engineer-in-charge. All

specification must be printed on the side of the panel to ensure the quality of the

product.450 mm Finished Floor Height (FFH)

Providing and fixing 10 mm thick acid and / or alkali resistant vitrified tiles of approved

make and colour using acid and /or alkali resisting mortar bedding and joints filled

123 NDSR-80 with acid and / or alkali resisting cement as per IS:4457 complete as per the direction Sqm ₹

of Engineer-in-charge. For flooring on a bed upto 30 mm thick mortar 1:4 (1

appropriate cement : 4 coarse sand).

Providing and laying tactile tile (for vision impaired persons as per standards) of size

300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:

15622 of approved make in all colours and shades in for outdoor floors such as

124 NDSR-81 footpath, court yard, multi modals location etc., laid on 20mm thick base of cement Sqm ₹

mortar 1:4 (1cement : 4 coarse sand) in all shapes & patterns including grouting the

joints with white cement mixed with matching pigments etc. complete as per

direction of Engineer-in-Charge.

GMRC 2026 Page 26 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

Providing and laying broken white glazed China mosaic flooring for plain and curved

surfaces on terraces, floors, balconies, roofs etc. comprising of 12mm to 20mm size

broken pieces of ceramic/ glazed tiles, laid over cement mortar 1: 3 bedding on plain

or sloped surfaces. The Treatment includes preparation of surface as required for

water proofing of roofs, balconies, terraces etc consisting of following operations: (a)

Apply of slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water

proofing compount confirming to IS 2645 and approved by engg. incharge over the

slab including adjoining walls upto 300mm height including the cleaning the surface

before the treatment. (b) Laying brick bats with mortar using broken bricks/ Brick bats

25-115mm size with 50% cement mortar (1:5) admixed with water proofing

compound confirming to IS 2645 and approved by engg. incharge over 20mm thick

layer of cement mortar of Mix 1:5 admixed with water proofing compound confirming

125 NDSR-82 to IS 2645 to required slope and treating similarly the adjoining walls upto 300 mm Sqm ₹

height including rounding of junctions of walls and slabs. (c) After 2 days of proper

curing applying coat of cement slurry using 2.75kg/sqm of cemment admixed jointless

cement mortar of mix 1:4 admixed with water proofing compound confirming to IS

2645. (d) Providing and laying broken white glazed China mosaic flooring for plain and

curved surfaces on terraces, floors, balconies, roofs etc. comprising of 12mm to 20mm

size broken pieces of ceramic/ glazed tiles, laid over cement mortar 1: 3 bedding on

plain or sloped surfaces. The flooring shall be tamped to bring the cement mortar

cream upto the surface, including rounding of junctions and extending them upto

cm along the parapet. The rate shall include bands, if different colour is used, any

pattern or design as per drawing and direction, finishing with white cement, curing,

cleaning with water and oxalic acid, etc. complete at all levels, as directed and to

satisfaction to the engineer in charge. Rate shall include all tools, tackles, machines,

necessary scaffolding, adding of waterproofing material as recommended in the

GMRC 2026 Page 27 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

bedding mortar by the Engineer in charge. (e) The Whole terrace so finished shall be

flooded with water for a min. period of 2 weeks for curing and for final testing as per

the direction of Engg. incharge.

Providing and laying vitrified floor tiles of light and dark shades, in different sizes

(thickness to be specified by the manufacturer) with water absorption less than 0.08%

and conforming to IS : 15622, of approved make, in all colours and shades, laid on

126 NDSR-83 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the Sqm ₹

joints (paper joints) with white cement and matching pigments etc., complete. Size of

Tile 600x600 mm. Laser machines shall be used for cutting tiles for cut / corner tiles

and the cut edges shall be grounded smooth to obtain straight and hairline joints.

Providing, laying, jointing, grouting including fixing in position to backing, prepolished,

20 mm thick granite, in sizes not less than 600x1200x20mm and rubbed to smooth

for Veneering/Cladding work to walls, beams, columns, pilasters, fascia, upstands,

jambs, sills, copings, soffits of openings and beams, with grout mortar of thickness to

be ascertained at site so as to achieve true lines, levels, plumb, planes etc. subject to

a minimum thickness of 20 mm for the grout cement mortar 1:4, and making of

127 NDSR-84 openings for service and other outlets etc. all to pattern, design and details as per Sqm ₹

drawings or as directed and including preparing the backing to receive the granite

work, white cement mortar, mixed with pigment to match colour of granite for

bedding and jointing, including curing, rubbing, sand blasting, washing, cleaning,

providing cut-out for services, machine cutting, providing machine drilled holes,

recesses, rebates for stainless steel attachments/ fixings, providing movement joints

etc. all as per drawings, specifications and as directed complete (stainless steel

attachments/fixings shall be paid separately). Provision to be made for "V"

GMRC 2026 Page 28 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

groove as per drawing, design and as approved by engineer. All shades and

textures of granite available in Quarries of Nearby states (Gujarat, Rajasthan etc.,)

Providing, laying mirror polished granite stones 20mm thick, all to required sizes,

design, details and pattern as per drawings, including diagonal, inlays, borders,

margins in one or more types of stone over prepared base mortar with ordinary

Portland Cement, fit jointed with/ without groove, with white cement slurry

mixed with pigment to match shade of granite including all finishing, all as required,

as per specifications and drawings and as directed complete in floors,

landings with upto 30mm thick base cement mortar 1:4 (1 cement : 4 coarse sand)

using hairline finish (unless otherwise specified) and curing, rubbing, mirror polishing

/ honing / sand blasting, washing, cleaning, making cut out for

services as instructed etc.. Note: Mirror polished granite of all shades

128 NDSR-85 Sqm ₹

and textures available in Quarries of Nearby States (Gujarat, Rajasthan etc.,), In

approved polished (mirror/honed) Base Light Coloured Granite stone slabs in

minimum size 1200 mm x 600 mm in flooring, In approved polished (mirror/honed)

Dark Coloured Type-1 Granite stone slabs in minimum size 1200 mm x 600 mm in

flooring, In approved polished (mirror/honed) Dark Coloured Type-2 Granite stone

slabs in minimum size 1200 mm x 600 mm in flooring, In approved sand blasted

Light Coloured Granite stone slabs in minimum size 1200 mm x 600 mm in flooring,

In approved sand blasted Dark Coloured stone slabs in minimum size 1200 mm x

mm in flooring, In approved mirror polished Green Kota stone slabs in minimum size

600 mm x 600 mm in flooring

129 NDSR-86 Dismantling of granite Sqm ₹

GMRC 2026 Page 29 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

Sub-Schedule-B.8(Reparing Work Granite/False celling/False

Flooring/Door/Windows/Door Lock/Tiles/Door Handle)

Repairing and refixing of door/windows shutter including removal of shutter from

chaukhat cutting where necessary removing and refixing butt hinges on other side of

130 NDSR-87 Each ₹

frame of shutter wherever required. (Cost of hinges including fixing shall be paid

Repairing of existing aluminium door and windows I/c opening the section and

131 NDSR-88 refining the section as per the existing as per direction of Each ₹

Repair of loose/damaged aluminium expansion joint strip with GP-2 or equivalent at

Platform and concourse level.

132 NDSR-89 Sqm ₹

Refixing of dry cladding upto 10 metre heights with 300mm thick gang saw cut stone

with (machine cut edges) of uniform colour and size upto 1m x 1m, fixed to structural

steel frame work and/or with the help of cramps, pins etc. and sealing the joints with

133 NDSR-90 Sqm ₹

approved weather sealant as per Architectural drawing and direction of Engineer-in-

charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for

GMRC 2026 Page 30 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

refixing of old 15-30mm thick granite stone of required size and shape of approved

shade, colour and texture in footpath,flooring in road side plasaz ,concourse,platform

134 NDSR-91 and similar locations, laid over 20mm thick base of cement mortar 1:4 incliuding Sqm ₹

grounting the joints with white cement mixed with mathing pigment, epoxy touch up

etc. asper direction of Engineer incharge.

Replacing existing floor tiles/granite including cutting existing fixed tile/granite,

dismantling tile/granite, removing all debris, cleaning and fixing new tile/granite using

135 NDSR-92 suitable adhesive of Laticrete or approved equivalent, all complete as per direction Sqm ₹

and satisfaction of Engineer-in- Charge. (This item does not include cost of

Tile/Granite which shall be paid extra)

Repairing/strengthening of existing raised false floor consisting of pedestal and floor

panels by providing extra support like the provision of stringers made of 25mm MS

square pipe etc. All complete as per the direction of the engineer in charge. The rates

136 NDSR-93 are inclusive of each individual materials, labours, machining/equipments all lead, Sqm ₹

lifts, transportation, painting and priming of stringers with anti corrosive/fire

retardent paints etc. complete, panels will be properly re-fixed by maintaining its

shape, size, level, alignments free from any undulation etc.complete.

Sub-Schedule-B.9(PEB Painting/Bolt Tightening)

Removing of old paint, rust with help of power tool and preparing the surface to

137 NDSR-94 various standards (ASA 3.0) before application of primer. The rate will include all the Sqm ₹

tools, paints, labour and other consumables and incidental charges. Nothing extra

GMRC 2026 Page 31 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

shall be paid except item no. 2, 4 & 5. The surface which are not accessible with the

help of power tool shall be prepared by the wire brush.

Cleaning the surface (roof truss at platform level) with detergent, wire brush, tools

for (inaccessible area) and making dust free. The work shall be carried out as per

138 NDSR-95 direction of engineer-in-charge and include all labour, maternilas. tools, plants, Sqm ₹

ladders, scaffoldings, spider, sfaety blets ect. all complete ( surface preparation to

Covering of flooring with terpoline to avoid any stain mark at granite floors on daily

139 NDSR-96 basis including labour charges for spreading and rolling back daily. (The dust Sqm ₹

collected should be disposed off to the specified place).

Providing and fixing of PP spider with necessary scaffolding, ladders, materiakls,

machines upto the height of 8m at platform shed with all lead, lifts ascent, descent

and transportation etc. All complete rates are inclusive of all highly skilled and semi-

140 NDSR-97 Sqm ₹

skilled labour. work wil be carried out strictly in non- operational hours as per

direction of engineer-in-charge. Wherever Spider net not possible to fix, payment of

scaffolding may be be given seperatly.

Applying surface tolerant epoxy coating in two coats with epoxy based primer with

minimum DFT of 200 micron and volume of solids not less than 75%. Paint is to be

141 NDSR-98 Sqm ₹

applied with spray painting in places where its inaccessible it may be applied with

brush. (Item to be used where surface is having scaling)

Application of finishing coat of(UV resistant coat) of minimum 50 micron thickness

142 NDSR-99 Sqm ₹

on surface which is not having any scaling

GMRC 2026 Page 32 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

Tighting of loose bolts pof all angles bracings in roof truss PEB Structure by

fitter/welder up to required torque using necessary T&P as per direction of

Engineer- In - Charge. Work will be carried out by using existing arrangement of PP

spider net with neccessary scaffolding ladder etc.done during truss painting of same

station (No extra payment will be given for height or any other arrangement, extra Per

payment will be given for additional MS plate/bolts/etc. if any). (Remark: If Only station

Tightening of Roof truss PEB Structure nut bolts is carried out and painting is not

executed, Payment will be made extra for extra arrangement of PP Spider and

necessary scaffolding at rate of NDSR 104) (To be carried out Annually for Metro

Providing and fixing of Hi-tensile galva lume steel sheets of 0.5mm thickness for

metro stations roof sheeting at all levels and height including all tools, materials,

labours, safety equipments, etc all complete as per direction of engineer in charge.

144 NDSR-101 Sqm ₹

(make-as per approved list) of requined shape, colur and size rate is also inclusive

dismantling of old hanging/ damaged roof sheets and stacking of the same at station

premises as per directions.

Providing and fixing 10 mm thick poly carbonate sheet make GE or equivalent and

make confirming to IS 14443:1987) of required colour, fasteners, silicon sealant,

EPDM gaskets and shade including self-drilling/self-taping screw as per requirement.

145 NDSR-102 Sqm ₹

146 NDSR-103 "Providing and repairing the damaged concrete portion with single component, fibre Sqm ₹

reinforced, dual shrinkage-compensated thixotropic, cementious patch repair

GMRC 2026 Page 33 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

mortar (having the technical parameters mentioned in material specifications)

capable of applying 25 mm thick in single layer initially by hand and finishing with

trowed carefully compacting the same around the rebars and finishing to bring it in

line with existing concrete surface with an average specified thickness inclusive of

manpower, material and equivalent Master Emaco 5348 of BASF renderoc HB-60 of

Fosroc/Sikadur 41 of Sika or equivalent.

(a) 25 mm thickness"

Sub-Schedule-B.10(Hire Machinary)

Providing, hiring, operating and maintaining Telescopic Manlift having boom length

of 25–30 meters on hire basis, complete in all respects including deployment of

skilled operator (driver), helper, fuel (diesel), lubricants, insurance and all

maintenance (routine, preventive and breakdown), repairs, insurance, statutory

approvals, permits and all operational costs as directed by the Engineer-in-Charge

147 NDSR-104 The equipment shall be kept in safe, efficient and fully functional condition at all Week ₹

times, and in case of breakdown the same shall be rectified within 12 hours failing

which no payment shall be made for the entire breakdown period and penalty shall

be applicable as per SCC, and if the breakdown exceeds 12 hours, an equivalent or

higher capacity standby machine shall be deployed immediately at no extra cost,

failing which penalty shall be imposed on the contractor.

The contractor shall ensure mobilization/shifting of the Man-lift within the contract

Scope area within a maximum time limit of 2 hours per km or part thereof as per EIC

GMRC 2026 Page 34 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

instructions with no extra payment for transportation, and any delay shall attract

proportionate penalty as per SCC; the rate shall be deemed to include deployment

of traffic marshal(s) and provision of all necessary safety arrangements including

barricades, reflective jackets, baton lights, cones and warning signage for operation

near traffic areas; the contractor shall ensure availability of the machine for all

working days except one (01) weekly off, and no payment shall be made for idle

time, non-availability, breakdown or any inefficiency; the quoted rate shall be firm,

fixed and inclusive of all taxes, duties, insurance, labour cess, statutory compliances

and incidental charges, and nothing extra shall be payable on any account

whatsoever, with payment being made only for actual working period duly certified

by the Engineer-in-Charge.

The machine deployed shall not be older than 5 years from the date of

Providing and Operating Diesel Truck mounted Boom Lift of 15-20

complete in all respects including deployment of skilled operator (driver), helper,

fuel (diesel), lubricants, insurance and all maintenance (routine, preventive and

breakdown), repairs, insurance, statutory approvals, permits and all operational

148 NDSR-105 costs as directed by the Engineer-in-Charge (EIC); Week ₹

The equipment shall be kept in safe, efficient and fully functional condition at all

times, and in case of breakdown the same shall be rectified within 12 hours failing

which no payment shall be made for the entire breakdown period and penalty shall

be applicable as per SCC, and if the breakdown exceeds 12 hours, an equivalent or

higher capacity standby machine shall be deployed immediately at no extra cost,

failing which penalty shall be imposed on the contractor.

GMRC 2026 Page 35 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

The contractor shall ensure mobilization/shifting of the Man-lift within the contract

Scope area within a maximum time limit of 2 hours per km or part thereof as per EIC

instructions with no extra payment for transportation, and any delay shall attract

proportionate penalty as per SCC; the rate shall be deemed to include deployment

of traffic marshal(s) and provision of all necessary safety arrangements including

barricades, reflective jackets, baton lights, cones and warning signage for operation

near traffic areas; the contractor shall ensure availability of the machine for all

working days except one (01) weekly off, and no payment shall be made for idle

time, non-availability, breakdown or any inefficiency; the quoted rate shall be firm,

fixed and inclusive of all taxes, duties, insurance, labour cess, statutory compliances

and incidental charges, and nothing extra shall be payable on any account

whatsoever, with payment being made only for actual working period duly certified

by the Engineer-in-Charge.

The machine deployed shall not be older than 5 years from the date of

Providing services for shifting/transportation of Man Lift (Telescopic Sky Lift / Hydra

Machine) from one work location/section to another, including movement outside

the assigned section, as and when required, strictly as per the instructions of the

Engineer-in-Charge.

149 NDSR-106 Each ₹

The transportation shall be carried out using suitable Truck/Trailer, including

loading, unloading, securing, transit handling, fuel, tolls, driver charges, and all other

incidental expenses, complete in all respects.

The rate shall be applicable for transportation distance up to 70 (Seventy) kilometers

GMRC 2026 Page 36 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

The contractor shall ensure timely mobilization and safe delivery of the equipment

without any damage

KSB Three Phase Submersible Pump Set 9.3 kiloWatt Discharge Capacity

150 NDSR-107 Each ₹

IS:8034:2018 Compliant

Supply of 10KV generator set including the cost of diesel and generator including Each

cost of operator. Day

Sub-Schedule-B.11 (Signage/Other Misc)

Reparing Signages :Repair damaged sign without replacing it Preparing surface by

removing all existing letters, symbols, base paint, lamination if any etc. including

152 NDSR-109 required scaffolding etc. Providing and fixing digital print vinyl (3630 series of 3M or

equivalent) to existing sign board required colour with printing as per signage

schedule, laminated.

153 NDSR-109.1 300mm X 300mm Nos ₹

154 NDSR-109.2 600mm X 400mm Nos ₹

155 NDSR-109.3 1200mm X 400mm Nos ₹

156 NDSR-109.4 1500mm X 400mm Nos ₹

GMRC 2026 Page 37 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

157 NDSR-109.5 1800mm X 400mm Nos ₹

Manufacturing, supplying and fixing retro reflective signage boards of 3mm ACP with

158 NDSR-110 high intensity encapsulated lens retro reflective vinyl Type-III, including all materials, Sqm ₹

fixing, rounding corners, complete as per specification.

Steel work in tubular sections with 50 micron pure polyester powder coating for

159 NDSR-111 signage frames, posts, suspenders; cutting, hoisting, welding/bolting complete as Kg ₹

Driver of 60W/100W/220W, IP65, lens option, 1W with 5-year warranty

(Osram/Vin/Samsung).

161 NDSR-112.1 60 watt Nos ₹

162 NDSR-112.2 100 watt Nos ₹

163 NDSR-112.3 200 watt Nos ₹

Site layout/main sign board (3mm ACP with retro reflective vinyl), SS post 50mm dia,

1.6mm thick, height 1.6m.

165 NDSR-113.1 Size 1500mm X 1200mm Nos ₹

166 NDSR-114 Supplying & installation of ACM material for photo-luminescent fire exit sign.

GMRC 2026 Page 38 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

167 NDSR-114.1 Size 275mm X 150mm Nos ₹

168 NDSR-115 Directory board – frame of SS pipe 50mm X 50mm X 1.6mm with ACP base.

169 NDSR-115.1 Size 1500mm X 1350mm Nos ₹

170 NDSR-115.2 Size 750mm X 1350mm Nos ₹

171 NDSR-115.3 Size 600mm X 900mm Nos ₹

172 NDSR-116 Supply & installation of laminated printed vinyl sheet (3M/LG equivalent) on glass. sqft ₹

173 NDSR-117 Supply & installation of flex single side print as per design. sqft ₹

174 NDSR-118 Supply & installation of flex board single-side digital print with aluminium stand. sqft ₹

Providing and pasting vinyl digital print signages at all locations including all T&P,

175 NDSR-119 labour etc for cleaning the surface, pasting signages all complete as per direction of

176 NDSR-119.1 a) On 3mm Sunboard Base Sqm ₹

177 NDSR-119.2 b) On 3mmAcrylic Base Sqm ₹

GMRC 2026 Page 39 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

178 NDSR-119.3 c) On 3mm ACP base Sqm ₹

Providing, supplying and fixing High Intensity Retro reflective sheet of approved

make on 3mm ACP Sheet. (Cost of ACP Sheet shall be paid extra) as per direction and

179 NDSR-120 Sqm ₹

satisfaction of Engineer-in-Charge.

Printing Matter for Signage

Providing and fixing acrylic hanging plate with printing on both sides of size 1 ft x

180 NDSR-121 Each ₹

ft all complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing 6mm thick SS Plate matt finish with 4no. of holes of dia

8mm/10mm and four edge mirror grinding and duly chamfered,

181 NDSR-122 Kg ₹

finishing with floor, including drilling holes in floor and fixing with screws, all

complete as per direction and satisfaction of Engineer-in- Charge.

Additional wiring for illuminated signage: Supply and wiring for lighting/Receptacle

in the existing conduit for lighting circuits/single phase sockets from DB to the switch

box with P + N _+E copper FRLSZH 1.1 KV grade cable to connect all signage’s, LEDs,

Lights, switches sockets etc. All wires shall be terminated with Pin tyle lugs and

provided with ferrules for identification normally circuit mains start from DB, MCB

and run up to the switch box/MCB controlled lights up to first point.

Single circuit consisting of 3 Run 2.5 sqmm copper conductor FRL SZH 1.1 KV Grade

183 NDSR-123.1 RM ₹

Double circuit consisting of 6 Run 2.5 sqmm copper conductor FRLSZH 1.1 KV Grade

184 NDSR-123.2 RM ₹

GMRC 2026 Page 40 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

185 NDSR-123.3 LED Rope light for Glow type signage RM ₹

186 NDSR-123.4 Adapter Nos. ₹

Providing and fixing of Anti Birds Spikes made of high quality of Poly Carbonate,

187 NDSR-124 Row 304mm. Rates are inclusive of screws, cable ties, adhesives, fasteners up to 5 Mtr ₹

meter Height complete as per direction of Engineer-in-Charge.

Attending various day to day complaints consisting of repairs to the doors, windows,

tables, chairs, ventilation, leakage of pipe lines, fixing the fittings using putty, nails,

screws, minor paints in parts not exceeding 0.50 sqm and rectifying the defects,

cause of complaints, with necessary T&P but without changing/replacing the

fittings/fixtures and its internal parts and it shall be treated as one complaint only.

188 NDSR-125 This includes maintenance of all the buildings and installations, involving repairs &

maintenance & attending the complaints/faults/breakdowns and taking rectification

action, within specified time to ensure the 24 x7 operation of Metro systems and

installation/fixtures etc. [ material like screws/nails for fixing of tower bolts/door

handles etc. and washers/ thread/ sefeda etc. in bib cock pillar cocks etc. to prevent

the leakage is included in the rates.]

Note:- For one location attending one complete unit (such as one door, one window,

189 NDSR-125.1 one table, one ceiling unit of one room , one Almirah etc. shall be treated as one

190 NDSR-125.2 Cost for Each complaint Each ₹

GMRC 2026 Page 41 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

Fabricating and supply & fixing of stainless steel (conforming to grade SS 304 stain

191 NDSR-126 Each ₹

finish) four seater bench without backrest as per drawing.

192 Face (Wall mounted)

Modular signages using aluminum extrusions (Alloy 6060) with anodizing (thickness

20-75 micron) ISO-9001-2008 product with premium grade anodizing as per

qualanod and qualicoat international standards. With lifetime warranty under

normal working conditions. Signage depth 25mm and inner thickness 1.5 mm with

profile weight of 0.492 kg per meter. Corners used to create frame.

4mm FR grade ACP AL45 used on both sides with 3M IJ 180C vinyl with 8520 over

laminate/IJ480C non pvc vinyl with 8550 non pvc over laminate/Diamond grade

type-11. Retro reflective fixed inside with the help of double sided tape. Signage will

be fixed by passing screws from star corner which will be fixed by drilling into the

194 NDSR-127.1 Non-Lit Sqm ₹

195 NDSR-127.2 Lit/Illuminated (Less than 0.5 sqm face area) Sqm ₹

196 NDSR-127.3 Lit/Illuminated (Equal to or More than 0.5 sqm face area) Sqm ₹

198 NDSR-128 Modular signage using aluminum extrusions (Alloy 6060) with anodizing (thickness

20-75 micron) ISO-9001-2008 product with premium grade anodizing as per

GMRC 2026 Page 42 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

qualanod and qualicoat international standards. With lifetime warranty under

normal working conditions. Signage depth 50mm. Profile outer thickness

2.5 mm and inner thickness 1.5 mm with profile weight of 0.839 kg per meter.

Corners used to create frame. 4mm FR grade ACP AL45 used on both sides with 3M

IJ 180C vinyl with 8520 over laminate/IJ480C non pvc vinyl with 8550 non pvc over

laminate/Diamond grade type-11 Retro reflective.For a IDDS display box of approx.

size 950 x 450 mm: A MS ( mild steel) RHS 50 x 25 x 3 mm horizontal member

welded on a 10 mm thick mounting plate supported by triangular gusset plate of

mm thick. This structural mounting is stable enough for IDDS. A cover plate of full or

half size covers the mounting and gusset plate.

199 NDSR-128.1 Non-Lit (Two sided) Sqm ₹

200 NDSR-128.2 Suspended (At Concourse Level)

Modular signages using aluminum extrusions (Alloy 6060) with anodizing (thickness

20-75 micron) ISO-9001-2008 product with premium grade anodizing as per

qualanod and qualicoat international standards. With lifetime warranty under

normal working conditions.

Signage depth 50mm. Profile outer thickness 2.5 mm and inner thickness 1.5 mm

201 NDSR-129 with profile weight of 0.839 kg per meter. Corners used to create frame.

4mm FR grade ACP AL45 used on both sides with 3M IJ 180C vinyl with 8520 over

laminate/IJ480C non pvc vinyl with 8550 non pvc over laminate/Diamond grade

type-11. Retro reflective.

The height of the pipe can be as per different locations on site, height can be

maximum up to 1.8 meter.

GMRC 2026 Page 43 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

At Concourse Level - with two nos. SS sections for suspension. SS316 CHS (Circular

Hollow Section) of dia 38mm/1.5" to be used to suspend a Display box of approx.

202 NDSR-129.1 Non-Lit (Two sided) Sqm ₹

203 NDSR-129.2 Lit (Two sided) Sqm ₹

204 Suspended (At Platform Level)

Modular signages using aluminum extrusions (Alloy 6060) with anodizing (thickness

20-75 micron) ISO-9001-2008 product with premium grade anodizing as per

qualanod and qualicoat international standards. With lifetime warranty under

normal working conditions.

Signage depth 50mm. Profile outer thickness 2.5 mm and inner thickness 1.5 mm

with profile weight of 0.839 kg per meter. Corners used to create frame. 4mm FR

205 NDSR-130 grade ACP AL45 used on both sides with 3M IJ 180C vinyl with 8520 over

laminate/IJ480C non pvc vinyl with 8550 non pvc over laminate/Diamond grade

type-11. Retro reflective.

The height of the pipe can be as per different locations on site, height can be

maximum upto 1.8m. At Platform Level - with MS sections for suspension.

40x40x3mm MS Pipe box sections to be used to suspend a Signage box of approx.

GMRC 2026 Page 44 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

206 NDSR-130.1 Non-Lit (Two sided) Sqm ₹

207 NDSR-130.2 Lit (Two sided) Sqm ₹

208 Post (Non-lit)

(Thickness 20-75 microns). ISO-9001-2008 product with premium grade anodizing as

per qualanod and qualicoat international standards. With lifetime warranty under

normal working conditions. The weight per meter is 2.148 kgs and profile thickness

I sign display frame: modular signages using aluminum extrusions (Alloy 6060) with

anodizing (thickness 20-75 micron).ISO-9001-2008 product with premium grade

anodizing as per qualanod and qualicoat international standards. With lifetime

warranty under normal working conditions.

Signage depth 50mm. profile outer thickness 2.5 mm and inner thickness 1.5 mm

with profile weight of 0.839 kg per meter. Corners used to create frame.

4mm FR grade ACP AL45 used on both sides with 3M IJ 180C vinyl with 8520 over

laminate/IJ480C non PVC vinyl with 8550 non pvc over laminate/Diamond grade

type-11- Retro reflective fixed inside with the help of double sided tape.

For mounting the poles MS section fixed inside the octagonal post, top covered with

plastic caps and bottom base plate made out of 10mm thick MS plate with round

GMRC 2026 Page 45 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

At Ground Level

210 NDSR-131.1 For mounting the poles MS Hollow Section 80 x 80 x 3.2mm Thk SHS, fixing with Sqm ₹

16mm dia 600mm long J-bolts in Concrete foundations.

At Platform Level

211 NDSR-131.2 For mounting the poles MS Hollow Section 80 x 80 x 3.2mm Thk SHS, fixing with Sqm ₹

16mm dia 250mm long Threaded Rods/bolts.

Provding and fixing Modular Totems using aluminum extrusions (Alloy 6060) with

anodizing (Thickness 20-75 microns). ISO-9001-2008 product with premium grade

anodizing as per qualanod and Qualicoat international standards. With lifetime

warranty under normal working conditions. Sections can be used to create totems

up to 6m with variable depths as per requirement. Basic profile with thickness 2mm

213 NDSR-132 and 1.525 kg/meter. Round cover profile of thickness 2mm and Sqm ₹

1.136 kg/meter. Ease of graphic change and maintenance.

The cost shall include complete foundation works including earthwork, excavations,

centering, shuttering, steel/RCC materials, bolts etc.

Totem size shall be 1000mm breadth x 4000mm height excluding foundations and

214 Channel Letters

Main station identity name shall be illuminated, exterior LED channel letters, reverse

215 NDSR-133 letter made with 3 mm aluminum.

100 mm sides of signage by bendable Aluminum alloy. Both back & side assemble

GMRC 2026 Page 46 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

with by argon welding. Top signage sheet fabricated of 5mm thick, Opal cast A grade

PMA sheet 3/4" ring made of 5mm plexi.

IP-65 high power chips LED modules (CE certified) 12V DC-1-1.4 watt beam angle

Input Voltage 220V AC-input frequency 47Hz Max. Output power 300/200/100W.

The sign and the logo shall hallow lit effect by LED's.

216 NDSR-133.1 Lit Channel Letters 600mm height Nos ₹

217 NDSR-133.2 Lit GMRCL Logo 1000 x 1000mm Nos ₹

218 Additional Structural steel required for ceiling Suspension

All structural steel shall be of tested quality and shall conform to one of the

219 NDSR-134 Kgs ₹

IS:226 Structural steel (Standard Quality)

IS:2062 Structural steel (Fusion welding quality) Grade A (1992) IS:961 High Tensile

Structural Steel (Ordinary)

220 Offices / Door signages

Providing and fixing plate signs made in 2mm Aluminum Brush finish Sheet neatly

221 NDSR-135 trimmed and corners rounded and dressed with holes punched/drilled as per size Sqm ₹

given in drawing. Graphics to be Plotter cut over self-adhesive vinyl as per artwork

and complete plate covered with a protective over laminate as specified and duly

GMRC 2026 Page 47 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

approved by Engineer-in-charge. Cost to include fixing of sign at location on to

plastered surface/concrete/Granite cladding etc. including all marking, alignment,

drilling, and plugs. 4nos. mirror head bolt per signage.

Mirror bolt head stainless steel screws complete as specified in drawings and at

locations approved by the Engineer-in charge.

Providing and fixing graphics printed on Opaque Vinyl directly pasted on the glass

surfaces. Printed over Opaque self-adhesive vinyl as per artwork and completed and

laminated with protective over laminate as specified and duly approved by Engineer-

in charge. Cost to include fixing of sign at location on to glass surface including its

cleaning, marking, alignment, complete as specified in drawings and at locations

approved by the Engineer-in-charge.Signs including all operations from printing,

223 NDSR-136 fixing graphics with protective laminate, and installation all complete as per relevant Sqm ₹

drawings and technical specifications.

Providing and fixing non-illuminated Photo-luminescent Safety Way Guidance

System (SWGS) Signages on rigid sheet with Strong Self Adhesive and protective

laminates, Life: 10 Years and Weather Proof. The sign should be easily cleanable with

a dry cloth or with a cloth humidified with water, Self-Extinguishing, and should not

contain any radioactive substances in toxic terms.

Photoluminescent

(Glow) Signages

225 NDSR-137 Signs including all operations from printing, fixing graphics with protective

laminate, and installation all complete as per relevant drawings and technical

GMRC 2026 Page 48 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

specifications.

Providing and fixing non-illuminated Photo-luminescent Safety Way Guidance

System (SWGS) Signages on rigid sheet with Strong Self Adhesive and protective

laminates, Life: 10 Years and Weather Proof. The sign should be easily cleanable

with a dry cloth or with a cloth humidified with water, Self-Extinguishing, and

should not contain any radioactive substances in toxic terms.

The product should be safe , Non Peelable, Non Scratchable, Non Breakable, Silk

Screen Printed: high quality paint with UV resistance, As Per PSPA Class - A / DIN

67510 Part 2 / 60 Minutes / > 700 mcdl with High photo-luminescent luminous

intensity Certified By Government Of India Lab

For A Glow Period > 24 Hrs. DRDO & ARAI Certified for All require QC test to

Confirm As per the IS 9457-2005 ,IS 12349 (To be approved by EIC) the color

Should be RED/ GREEN/ BLUE/ YELLOW with Graphics Symbol in White as

approved by GMRCL/ Engineer-in-charge.

226 NDSR-137.1 Exit direction and Emergency Exit signages - 150 x 400mm Nos ₹

227 NDSR-137.2 Escape arrow Path Marking Tape sign - 80mm thk RM ₹

228 Additional Conduiting for Illuminated Signages

Providing conduit embedment or surface laying on the roof slab / wall/ structures

including supply of heavy duty GI conduit pipe with minimum 20 micron thick

229 NDSR-138 galvanizing along with all required G.I conduit accessories like bends elbows,

junction boxes square boxes etc. With specification as covered under special

specifications of electrical works .The conduit shall be installed and GI fish wire

GMRC 2026 Page 49 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

shall be provided a pulling wire. The conduit shall be provided as pulling wire,

surface laying conduit shall be used with spacer type saddle clamps with brass

32mm Dia - GI Conduit pipe for lighting and power circuits including conduit

230 NDSR-138.1 Rm ₹

25mm Dia - GI Conduit pipe for lighting and power circuits including conduit

231 NDSR-138.2 Rm ₹

accessories and all junction as required.

232 Additional Wiring for Illuminated Signages

25mm Dia - GI Conduit pipe for lighting and power circuits including conduit

accessories and all junction as required. Supply and wiring for lighting/receptacle

in the existing conduit for Lighting Circuits / Single phase sockets from DB to the

switch control box (SB) with P+N+E-copper FRLSZH 1.1 KV grade cable to connect

all signages, LEDs, lights, switches, sockets etc. All wires shall be terminated with

pin type lugs and provided with ferrules for identification normally circuit mains

start from the DB, MCB and run up to the switch box/ MCB Controlled lights up to

Single circuit consisting of 3 Run 2.5 sq.mm copper conductor FRL SZH ,1.1 KV

234 NDSR-139.1 Rm ₹

Double circuit consisting of 6 Run 2.5 sq.mm copper conductor FRLSZH 1.1 KV

235 NDSR-139.2 Rm ₹

GMRC 2026 Page 50 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

Single circuit consisting of 2 Run 4.0 sqmm and 1x2.5 sq.mm copper conductor

236 NDSR-139.3 Rm ₹

FRL SZH ,1.1KV grade cable

Double circuit consisting of 4 Run 4.0 sq.mm and 2x2.5 sq.mm copper conductor

237 NDSR-139.4 Rm ₹

FRLSZH 1.1 KV grade cable

238 Spike for birds

Providing and fixing spikes over suspended/post/projected signage for birds

made with latest technology that do not harm bird but make signage bird proof.

Spikes for birds made in 3 inch Uv stabilized polycarbonate protecting it from the

sun's rays. That will not go brittle even in direct sunlight. It shall be also

temperature resistant tested from -20 °C to +150 °C. It shall be effective against

239 NDSR-140 even the heaviest pigeon infestation. Bird spike shall be designed to protect Rm ₹

broad and narrow ledges.

Maximum height shall be 3 Inch. Length shall be as per signage. Color shall be

Cost to include fixing of spike on signage including all marking & alignment.

Locations approved by the Engineer-in charge.

240 NDSR-141 Installation of Low Height Ticket Counter Sqm ₹

241 NDSR-142 Installation of Drop off Signage Board Sqm ₹

GMRC 2026 Page 51 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

SCHEDULE B.12:( Borewell items)

Supplying and Installation as Specified the following ,as per direction of engineer-in -

charge,including all taxes and duties applicable

Water type check valve 100mm dia of Odco,sant,kirloskar, leader or equivalent make

243 NDSR-143.1 Each ₹

conforming to PN-10

Pressure gauge with isolating valve of 10mm dia confirming to IS: 3624 of H-Guru,

244 NDSR-143.2 Each ₹

Dan-Fuss or equivalent make

Supply of submersible pump set with 4 HP, 3 phase, 440 volt, 50 Hz motor 10 stage

245 NDSR-143.3 pump suitable for 80 feet water level and discharge 1800 ltr/hr model no. CORA- Each ₹

12C/') make - KSB.The rates are inclusive of all taxes and duties complete.

Supply erection of 2.5 sqmm submersible cable make- Finolex, CCI, skyone.The rates

246 NDSR-144 Meter ₹

are inclusive of all taxes and duties complete.

Lowering of pump submwersible pump into the existing bore as per direction of

247 NDSR-145 Each Job ₹

engineer-in-charge.The rates are inclusive of all taxes and duties complete.

Lifting of pump set from the existing bore as per direction of engineer-in-charge.The

248 NDSR-146 Each Job ₹

rates are inclusive of all taxes and duties complete.

Providing and fixing ISI mark 4 x 2.5 sqmm. Copper conductor armoured cable. All

249 NDSR-147 work shall be carried out as per direction from Engineer-in-charge.The rates are RM ₹

inclusive of all taxes and duties complete.

GMRC 2026 Page 52 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

Providing and fixing ISI mark 1' PVC conduit pipe. All work shall be carried out as per

250 NDSR-148 direction from Engineer-in-charge.The rates are inclusive of all taxes and duties RM ₹

Removal of water and existing filter materials from the structures, Development and

cleaning of bore Cleaning of material and putting back to the system as required

251 NDSR-149 Each ₹

and per direction of engineer-in -charge. The rates are inclusive of all taxes and

duties, Nothing shall be paid extra.

Miscellanecous civil works like cleaning of ground rain water drain , meshes, minor

252 NDSR-150 repairing of drains, meshes, manhole covers etc. The rates are inclusive of all taxes Each ₹

and duties complete

Cartage of equipment required for maintenance of Borewell as required as per

253 NDSR-151 direction of engineer-in-charge. The rate are inclusive of all taxes and duties Each job ₹

Sinking bore well of 150mm dia clear, using fast rig in all strata including I Lot

overburden up to 20m, fixing of casing pipes, collars and cap with necessary

254 NDSR-152 cutting and threading Including transportation of rig and supporting vehicle, Lot ₹

crew charges and cost of consumables etc. complete including yield test at the

final depth with a minimum working of comeressor for one hour

255 NDSR-152.1 Up to 60 m depth @Rs. 200 perm

256 NDSR-152.2 Above 60m and up to 90m@ Rs. 220 perm

GMRC 2026 Page 53 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

257 NDSR-152.3 Above 90m to 120m @ Rs. 250 per m

Supplying 150mm n.b MS 'C' class bore well casing pipe with collars

conforming to IS Standards

Supply, delivery, Installation, testing and commissioning of vertical multistage

259 NDSR-154 submersible pump of Suitable Capacity (HP) and providing necessary piping and Set ₹

valves upto ground level comprising of

One set vertical multistage suitable submersible pump of 3 Phase 415 V, 50 Hz

AC, pump capable of pumping 600LPM against an approximate total head of

110m from all causes, Including providing 4C x 4 Sqmm 440 V flat core double

sheathed water proof submersible cable, Star Delta starter, control panel with

dry run preventer, overload protection and backup protection and capacitor as

260 NDSR-154.1 required, installed Inside a weather proof kiosk with locking arrangement of

approved design near the bore well, including making necessary electrical

connections from mains to the starter panel and from starter panel to pump.

Submersible pumps may be of Atlanta/ KS8 / Klrloskar / Calama makes

Note: The 4C x 4 Sqmm 440 V flat core double sheathed water proof

submersible cable shall be in scope of contractor as e_er site condition.

Providing & fixing gun metal gate valve & non return valve of 50mm nominal

bore on delivel\l_ side

Supply & Fixing 50mm n.b GI Pipe conforming to IS Specifications from bore

well pump up to ground level.

GMRC 2026 Page 54 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

lowering the pump & pipe assembly using tripod & chain pulley block in a neat

workmanship manner with all necessary accessories for supporting the pump,

providing & fixing necessary bore well clamps on the delivery pipe to securely

position & retain the pump & pipe in position etc., come_lete

Supply, delivery, installation, testing and commissioning of vertical multistage

submerslble pump of suitable HP or nearest standard manufacturing size and

264 NDSR-155 providing necessary piping and valves up to ground level suitable for 601pm at Set ₹

25 mtr head complete with 4m delivery pipe, submersible electrical cable, DOt.

starter, Level switch [Float sensor.

Providing, erecting approved make horizontal mono submersible pump set I

having flow rate of 60 LPM and 25 m head with suitable motor working on

265 NDSR-156 Phase, 50 Hz, 415 volt+-10% with dual starter, cables of required size, GI Set ₹

medium delivery pipes, specials, suction strainers etc. complete including

manlfoldL control and measuring devices.

Sub-Schedule-B.13(Paver Block Work)

Providing and laying factory made chamfered edge Cement Concrete paver blocks in

266 NDSR-157 parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & Sqm ₹

shape, made by table vibratory method using PU mould, laid in required colour &

GMRC 2026 Page 55 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

over 50mm thick compacted bed of sand, compacting and proper embedding/laying

locking paver blocks into the sand bedding layer through vibratory compaction by

plate vibrator, filling the joints with sand and cutting of paver blocks as per required

and pattern, finishing and sweeping extra sand. complete all as per direction of

60mm thick cement concrete paver block of M-35 grade with approved colour,

Taking out existing CC interlocking paver blocks from footpath/ central verge,

removal of rubbish etc., disposal of unserviceable material to the dumping ground,

267 NDSR-158 for which Sqm ₹

payment shall be made separately and stacking of serviceable material within

as per direction of Engineer-in-Charge.

Laying old cement cocrete interlocking paver blocks of any design/ shape laid in

268 NDSR-159 line, level, curvature, colour and pattern over and including 50 mm thick compacted Sqm ₹

coarse sand, filling the joints with fine sand etc. all complete as per the direction of

GMRC 2026 Page 56 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

charge. (Old CC paver blocks shall be supplied by the department free of cost).

Sub-Schedule-B.14 (Paint Work)

Finishing with Deluxe Multi surface paint system for interiors and exteriors using

Primer as per manufacturers specifications :

269 NDSR-160 Sqm ₹

Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat

of Special primer applied @ 0.75 ltr /10 sqm

Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two

270 NDSR-161 Sqm ₹

or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface

Painting with synthetic enamel paint of approved brand and manufacture of

271 NDSR-162 required colour to give an even shade : Sqm ₹

One or more coats on old work

Removing white or colour wash by scrapping and sand papering and preparing the

272 NDSR-163 Sqm ₹

surface smooth including necessary repairs to scratches etc. complete

Applying priming coats with primer of approved brand and manufacture, having low

VOC (Volatile Organic Compound ) content.

273 NDSR-164 Sqm ₹

With water thinnable cement primer on wall surface having VOC content less than

GMRC 2026 Page 57 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

Sub-Schedule-B.15 (Sprinkler Work)

Providing &fixing of Pop up sprinkler full/part circle having radius of throw 6.7 m-

15.2 m &floww of 0.09 -0.16 Ltr /sec at an operative pressure of 2.5- 4.5 kg/cm sq

The sprinkler is gear driven ratary type with RC technology having 3/4" bottom inlet,

with slip clutch mechanism and heavy duty retract spring memory arc,non strippable

274 NDSR-165 and brass reinforced nozzle turret.The sprinkler shall have multi-function, pressure nos ₹

activated wiper seal for low pressure operation the sprinkler shall have internal seal

Metric device which prevents low head drainage up to 3.1 m) &hence pudding &

erosion. The body of sprinkler is non corrodable heavy duty ,ABS plastic

Providing &fixing of POP up spray head having variable adjustable arc and two pieces

stem ratchet (0 to 360 degres )nozzle capable of covering 0.9-5.5 m at 1.0- 2.1 bars

275 NDSR-166 with a discharge rate of 0.23- 0.33 lps .The spray head body ,stem,nozzle,ratchet and nos ₹

screen shall be constructed of heavy duty , ultra voilet resistant plastic and stainless

steel with multifunctional wiper seal with small exposed cover US400

Providing &fixing of 1/2" pop up connecting swing joint assembly. The tubing

shall be made of polythene having wall thickness of 2.3 mm a working pressure of

276 NDSR-167 nos ₹

5.5 kg/sq cm at 43* c and a surge pressure of 16.6 kg/sq cm .The fittings shall be

made of UV resistant thermo plastic SA series

GMRC 2026 Page 58 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

S.N. Description of Items Unit Basic Rate

Providing &fixing of 3/4" pop up connecting swing joint Assembly. The tubling

shall be made of polythylene having wall thickness of 2.3 mm a working pressure of

277 NDSR-168 nos ₹

5.5 kg/s q cm at 43* C and a surge pressure of 16.6 kg/ cm Sq .The fitting shall be

made of UV resistant thermo plastic SA series.

Providing valve 63mm providing & fixing Brass Ball valve security pivot to maintain

level in space double water tight joint direct injection stem non mechanical with a

278 NDSR-169 nos ₹

base which permits maximum penetration in to the valve etc complete as per

specification and drawing (Ball vaive 63mm dia)

Providing &fixing of a double acting Air release valve 3/4" made of high strength

aluminum/plastic with fiber glassreinforced. The Air release valve shall be capable of

279 NDSR-170 both releasing and admitting air from and into the line. The working pressure shall nos ₹

12" Rectangle valve Box with green lid and corrugated structure with unique shovel

280 NDSR-171 nos ₹

access slot and bolt hole knockout.

Quick coupling valve made up of solid brass with locking cover corrosion resistant

281 NDSR-172 nos ₹

and stainless steel spring 3RC.

B Total Amount of Schedule-B

B Total Amount of Schedule-B

GMRC 2026 Page 59 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

Annexure – 2, DETAILS OF TAXES AND DUTIES (Tax Bifurcation) INR: Indian Rupees

GST (Goods and Services Tax)

Customs Duty Total

CGST SGST IGST Any other Tax Amount of

t on t on Amount Amount

Amou Amount on Amoun Amoun

which Rate which Rate Amount Rate on which Rate Amount on which Rate (6) = sum

nt which tax/ t t

tax/ (%) tax/ (%) (INR) (%) tax/ duty (%) (INR) tax/ duty (%) of (1) to

(INR) duty levied (INR) (INR)

duty duty levied levied (5)

al Note :1 Contractor at any point of time shall be bound to share the details pertaining to the Input Tax Credit availed or to be availed along with the supporting documents.

Note:2 In the Tax Schedule Contractor shall require to furnish component wise tax details.

Note:4 GST TDS will be deducted from the invoice considering the prevailing rates

Note 5 : It shall be sole responsibility of Contractor to pass all the accrue or to be accrued Input tax credit to GMRC as per Section 171 of CGST Act.

GMRC 2026 Page 60 of

Tender No: GMRC/CIVIL MAINTENANCE/REACH-1/PH-1/2026 BOQ

PROFORMA FOR STATEMENT OF MINOR DEVIATIONS

(Refer C15 & C26 of ITT)

1The following are the particulars of minor deviations from the requirements of the Tender Document:

Sr. No Clause Deviations Price adjustment for each

1 The Tenderer shall indicate price adjustment against each deviation in Annexure 13A of BOQ. This price is the price

which the tenderer shall reduced from this tender price if deviation(s) is/are accepted by the Employer.

2 Where there is no deviation, the statement should be returned duly signed with an endorsement indicating ‘No

Deviations’.In case, Performa of deviations is not submitted or submitted as blank, it will be construed that the

tenderer has not proposed any deviations from tender documents.

3 If the tenderer proposes deviations in tender documents, and/or any other terms and conditions of the tender,

other than in this Annexure, it will have no effect.

Signature of authorized signatory on behalf of tenderers

GMRC 2026 Page 61 of