PROVN OF HIGH MAST LIGHTS ANCILLARIES AND SECURITY LIGHTS WITH UG CABLE ALONG THE PERIMETER OF OTM ACCN OF MED REGT UNDER GE UTILITY AMBALA CANTT

Amount

Excavation in trenches n.exc 1.5 Mtr wide and not exc 1.5 Mtr in depth loose/soft and getting out for underground cable/erection of poles, stays etc complete all as specified and directed.

Material and Labour for sand cushioning for cables with river washed sand and punning to provide required cover as per SSR part I complete all as specified and directed.

Supply and laying bricks common burnt clay sub class 'B' old size for cable protection complete all as specified and directed.

Material & labour for Plain cement concrete type B1, 1:2:4 using 20 mm graded stone agregate as coping to poles, foundations to poles complete all as specified and directed.

Returning, filling in (Soil) including spreading, levelling, watering and well ramming in layers not exc 25CM thick layers complete all as specified and directed.

Removal of excavated material n,exc 50 Mtr away and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

Supply, laying, connecting and testing XLPE underground cable insulated, overall sheathed with aluminium conductor heavy duty 1100 volts grade 16 sqmm 4.0 core laid in trenches/ on pole/road crossing or passing through existing/new pipe under road crossing clamping on wall etc complete all as specified and directed. Note : (i) Earth work, sand, bricks removing, returning filling, Aluminium thimbles/lugs will be paid seperately. (ii) Cost of laying electrical cable through new pipe under road, buildings, railway tracks, highways are incl in the quoted rates (iii) All equiments, machinery or tool if required for laying electrical cable through new pipes are provided by the contractor without any extra cost.

Supply and fixing of GI tubing 50 mm bore light grade on poles, on walls under floors, road crossing as reqd at site complete all as specified and directed. Note : Clamps. Nuts bolts, saddle etc will be measured and paid seperately.

Supply and errection of 15 M galvanised high mast system with its accessories. Mast shaft shall be in two sections, hot dip galvanised and suitable for wind velocity as per IS 875. It shall also include accessories for high mast including head frame, stainless steel wire rope 6 mm dia (97/19 gauge), trailing cable double drum winch, galvanised Lantern carriage arrangement suitable for 8 luminaires symmetrically & its control gear boxes and lightening finial. The mast shall have an integral power tool installed inside the base compartment for its operation. The rates quoted includes the following :- (a) Supply & fixing of foundation bolts manufactured from special steel along with nuts, washers, anchor plate as per manufacture drawing and templates. (b) Construction of suitable shallow foundation with 1:2:4 concrete for the high mast considering the safe soil bearing capacity at site as 2 metre depth with all materials and labour with 1:4:8 base for 0.5 mtr (c) Erection of the high mast with the help of suitable equipments/crane and wiring of luminaries with all wiring materials and labour. (d) Provision of pully assembly, aviation obstruction light, lightning arrester spike and connection of day light sensors complete all as specified and directed. Make- Bajaj/Philips/Wipro/Havells/Crompton Greaves.

Supply and fixing LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp incl proper fixing and testing of flood lights on mast pole and provide facility of power supply shall be provide as suitable for maint work of lights without removing light fitting from mast pole incl make proper connection complete including cutting , welding , drilling holes, nut bolts, washer complete all as specified and directed.

Taking down existing earthing and material and labour for earthing complete with galvanized steel earth plate electrode 60 x60x6 mm thick , buried directly in ground ( earth pit not less than 2.25 meter deep below ground level) with using galvanised iron strip 32x6 mm thick as earth lead by means of bolts , nuts , check nuts and washers of galvanised iron or steel all as shown in electrical plate no 5 , with top edge of plate not less than 1.5 m below normal ground level , surrounded from all sides by charcoal dust and common salt in alternative layers of 15 cm depth and earth connected with equipment by means of bolts , nuts, check nuts and washers of galvanised iron and connection to earth mesh including welding and complete with charcoal after installing earth strip , earth work and filling pit with PCC 12:4 type B-1 and pre cast RCC cover mix (1:1.5:3) complete all as specified and directed. Note : (i) The quoted rate shall include the cost of earth work, GI pipe for watering, GI protection pipe, funnel, wire mesh, RCC cover, etc. complete. RCC cover shall be 50mm thick in 1:2:4 type B-1 using 8mm bars @10cm c/c both way. (ii) The quoted rate shall include the cost of the earth pit covers to be conspicuously marked of plate with stand grouted in PCC. (iii) On testing after completion if the desired earth resistance is more than 2Ώ the earthing will be redone at no extra cost.

All as per Srl Item No 11.00 here in before but for connected to galvanised earth lead wire of 4.0 mm dia by means of GI nuts bolts, check nuts and washers and connected to earthing test point drawn through 15 mm bore GI pipe medium grade for protection of GI earth lead wire including 20mm bore GI pipe medium grade for watering GI funnel complete all as specified and directed.

Supply and fixing or passing through pipe, 1100 volts grade heavy duty, PVC insulated round 4 core 2.5 sqmm copper cable including electrical connection complete all as specified and directed.

Supply, fixing and testing of auto day/ night on and off photocell LDR sensor switch 6 Amps for lighting on and off photocell, LDR sensor switch 6amps for lighting on and off water proof 220volt 50HZ,AC supply, model No Quick Sense QS-301 complete with all accessories internally pre-wired including connection with 1.5 Sqmm copper conductor from main supply to sensor, sensor to fittings with plastic caps incl soldering to connections( No tape to be used) complete all as specified and directed.

Excavation in trenches not exceeding 1.5 metre wide and exceeding 1.5 metre deep but not exceeding 3.0 metre deep in loose / soft soil and getting out for under ground cable / errection of poles stays etc complete all as specified and directed.

Material and labour PCC 1:4:8 type D-2 using 40mm graded aggregate, mechanically crushed stone for mass filling in pole pit and foundation etc. complete all as specified and directed.

Material and labour cement concrete (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in coping of pole and strut, stay around the pole etc complete all as specified and directed.

Supply and erection of steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts,nuts and screws as specified type 410 SP-31 , 09 meter long, providing synthetic enamel aluminium paint over one coat of red oxide and black and white strips with synthetic enamel paint 30 cm each alternatively upto 1.5 mtr above the coping of pole starting with black strip, incl holes & glands for incoming & out going cable/wire from pole box to streel litht incl numbering on poles with yellow background & white letters on radium tape complete all as specified and directed.

Supply, laying , connecting and testing XLPE armoured cable underground insulated and overall sheathed with aluminium conductor of size 95 Sqmm 3.5 core heavy duty 1100 volts grade laid in trenches/ on poles/ road crossing or passing through existing/new pipe under road crossing, clamping on wall etc complete all as specified and directed. Note : (i) Earth work, sand, brick, removing, returning filling will be paid seperately. (ii) Cost of laying electrical cable through new/existing pipe under road, buildings, railway tracks, highways are incl in the quoted rates. (iii) All equipments , machinery or tools if required for laying electrical cable through new/existing pipes are provided by the contractor without any extra cost.

All as per item Srl Item No 20.00 here in before but for 25 Sqmm 4 core.

Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique or manual boring and necessary machine including HDPE pipe of 50mm to 100 mm dia suitable for 0.4 mpa working pressure complete all as specified and directed.

Supply, fixing or passing through PVC conduit pipe of 1100 volts grade heavy duty, PVC insulated round 3 core 1.5 sqmm copper cable with PVC conduit pipe fixed with clamp & nuts bolts including electrical connection suitable size of lugs,complete all as specified and directed.

Supply & fixing of Sunbeam Senso LED Sensor street light fitting 45 watts made up of pressure die cast aluminium housing with high efficiency LEDs as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 consisting of suitable number of LEDs with sealed toughened glass cover, 5700K, LED efficiency >110 lm/Watt and system efficiency 110 lm/W , 230 Volts AC, 50 Hz, CRI>70% operating voltage range 140 V-270 V, Power factor> 0.95,mains current 0.210A, working temperature range -10ºC to 50ºC,built in surge protection of more than 10 KV, autonomous sensor based dusk to dawn SL, IR sensor to mitigate the effect of surrounding, artificial lightbetter optics for uniform distrubution with multiple LEDs not less than 2 watt each and having optical grade polycarbonate lens with all accessories , suitable for side entry, pole mounting with bracket arm OD 40 mm, recommended mounting height with suitable inground reinforcement is 8 mtrs, Confirm the safety test as per IS 16107 part-2 from auth labs : LM79 & LM 80, incl proper fixing and testing of street lights on 9/11 mtr long steel tubular pole and provide facility of power supply shall be provide as suitable for maint work of light fittings incl make proper connection of new and existing light fittings complete with cutting , welding , drilling holes, nut bolts, washer complete all as specified and directed. Make :- Havells cat part no ENDURASUNBEAMSL45WLED757SASYTOPCSENSO or equivalent Philips/Bajaj/Crompton/Wipro Note :- PVC heavy duty conduit pipe along with 3/1 run of 1.5/2.5 sqmm PVC insulated unsheathed/sheathed copper multistranded conductor from MCB box to street shall be measured and paid for separately.

Supply and fixing of fabrication of Kiosk box made out of fibre material complete with TPN ,aluminium busbar and suitable for one number MCB (SP) including one No MCB (SP) 6 Amps 240 volts with glands for incoming & out going cable including fixing of flat iron clamps of size 20x4mm on PCC/Steel tubular pole complete all as specified and directed. Make:Sintex/Hensel/Siemens/Rittal.

Supply & Fixing of bracket made out of GI tubing single piece bended at proper angle of size 40mm dia, light grade 1.5 mtr long including painting with aluminium paint over one coat of red oxide primer to the bracket of street light fitting complete all as specified and directed.

Supply & Fixing of MS clamp suitable for holding street light bracket on steel/PCC pole made out of 40 mm x6 mm thick flat iron with M.S nuts bolts 50 mm long 10 mm dia -3 Nos with flat washer 3mm thick -02 No for each including painting with aluminium paint over one coat of red oxide primer to the M.S clamps complete all as specified and directed.

Supply, installing, testing & commissioning of outdoor type cubical panel board of size 1.0mX0.9mX0.5m (W x H x T) outer shell made out of 3.15 mm thick CRCA sheet and inner shell made out of 2 mm thick CRCA sheet and MS angle section 50x50x6 mm mounted on PCC 1:2:4 type B-1 platform 80 cm above and 45 cm below the ground level, frame factory fabricated with front and back openable double door system having 50% area as perspex sheet of min 5 mm thickness and cable alley (Each door hinged with body at 3 places with body and hinges should be welded with body and door) lockable/open able with arrangement of pad locking on both doors incl 2 no. of pad locks of three keys shall be used to make the outer shell completely vermin proof suitable for 3 phase 4 wire 415 Volt, 50 Hz, incl Cu bus bar of 350 A , tested at factory approved from CPRI factory fabricated having modern fabrication and testing process followed by powder coat painting having thickness not less than 100 microns provided with suitable gasket to make it dust/vermin proof and general construction confirming to IS:61439/2011 Part-1 and part -2 type test certificate with not less than IP-65 and breaking capacity 56 KA comprising of the following :- (a) Incoming MCCB 200 Amps, 25 KA 4 pole 415 Volts AC, adjustable type, -01 No. (Make :- Havells/L&T /Schneider/ C&S/Siemens (b) Out going MCCB 63 Amp, 16 KA, 4 pole, 415 volt AC -03 Nos (Make :- Havells/L&T /Schneider/ C&S/Siemens). (c) Out going MCB 32 Amp, 10 KA, 4 pole, 415 volt AC -02 Nos (Make :- Havells/L&T /Schneider/ C&S/Siemens (d) RYB indication LED type, 22.5 mm dia, protected with MCB SP 2 Amp showing 3 phase supply -03 Nos (e) Multi function meter with KWH, voltage, Amp, frequency meter. Make AE/L&T/Havells (f) Misc items like screws, cable tie, copper cable 1.5/2.5 Sqmm, cabe lugs, sleeves, glands etc complete are included in quoted rates complete all as specified and directed. Note :- (i) The quoted rate shall include minor items such as lugs, nuts & bolts, washers, top insulators, sleeves, provision of extra holes in bus bar etc. (ii) All internal wiring shall be done with suitable size of PVC insulated solid copper conductor FRLS cable conforming to IS-694. (iii) Panel drawing shall be got approved before placing of order from Engr-in-Charge/GE. (iv) The bus bar connection for cable from main bus bar to outgoing MCCB will be connected through suitable rating bus bar strip type duly insulated. (v) Cable will be entered in panles through gland. (vi) Cost of marking description and matter on the front door as specified and directed by Engr-in-Charge is incl in quoted rate.

supply and fixing of Retro reflective sign board print both side of size 600 mm x 750 mm made of ACP sheet of 3mm thick ACP sheet shall be fixed on MS frame with legs of MS angle section 35mm X 35mm X 5mm grouted in PCC 1:3:6 type C-1, 800mm above the ground level and 600mm below the ground level. The background of board to be provided with red colour, letters and border with white retro reflective tape. Same description shall be mentioned on both sides of ACP sheet complete all as specified and directed. Note:- (i) Excavation, earth work, PCC, nuts, bolts, fasners, paint on MS frame and legs shall be included in quoted rates by contractor. (ii) The size of letters and description shall be all as per sample approved by Engr-in-Charge.

Supply and fixing of outdoor end termination joint heat shrinkable 1100 Volts for XLPE cable of size 3.5 x 70 to 150 Sqmm complete all as specified and directed.

Supply and fixing of MCCB 200 Amps, 415 Volts, 25 KA, 4 pole , Ics=100% Icu, overload adjustable short circuit adjustable type for fixed on existing LT panel incl connection complete all as specified and directed.

KULWANT SINGH (BID ID -3201156)

R. P. Suppliers and Construction Co. (BID ID -3198610)

Raman Electric Trading Co (BID ID -3194267)

M/s badrinath Traders (BID ID -3199851)

UNITED ENGINEERING CORPORATION (BID ID -3195291)