Urgent finishing works at new Nephro and Neuro ward in the fourth floor of Golden Jubilee Block attached to SAT Hospital Thiruvananthapuram General Civil Work

Amount

Urgent Finishing Works

OD151322/2022-2023:Providing and fixing frame work for partitions/ wall lining etc. made of hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to centre both ways (vertically & horizontally) or at required spacing near opening, with necessary welding at junctions and fixing the frame to wall/ceiling/floors with steel dash fasteners of 8 mm dia, 75 mm long bolt, including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of approved steel primer etc. complete, all as per direction of Engineer-in- charge. (Based on 9.154)

OD149835/2022-2023:Providing and fixing shelves and false ceiling with 4 mm thick aluminium composite pannelin approved shades. Cutting the ACP sheet in required shape for fixing. After cutting filling the edges for accurate position. Then remove scratch preotection stickers from aluminium composite panels on both sides. The stickers have gum under it, so the gum should be cleaned using cleaning solution ans banniyan waste. Then fixing the ACP panel using gumrebate, 55 screw, nuts, bolt, washes, cleats and wether silicon sealent. Then the masking tapes are used for designing the silicon in a perfect line. After designing the silicon the masking tape is removed from both sides, including cleaning searfolding loading unloading etc. complete.

13.80:Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

13.83.2:Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile including applying additional coats wherever required to achieve even shade and colour.Two coats

OD150452/2022-2023:Labour engaging for cleaning the premises, shifting the materials before and after the completion of work.

21.3.2:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness

VIJAYAN K

ANUKUMAR

S SAJEEV

Bidder Name

N A NAJEEB

ANUKUMAR

VIJAYAN K

S SAJEEV