Construction of Secondary School building at district JUNAGADH.

Excavation for foundation upto 1.5 m depth including sorting out

and stacking of useful materials and disposing off the excavated

stuff upto 50 Meter lead.(A)

Loose or soft soil

Excavation for foundaation for depth from 1.5 m to 3.0 m including

2 sorting out and stacking of useful materials and disposing off the 237.46 136.30 Cum

excavated stuff upto 50 Meter lead.(A) Loose or soft soil

Excavation for foundation upto 1.5 m depth including sorting

out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(D) Soft rock not requiring

Filling Available Excavated Earth (Excluding Rock) In Trenches.

Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20 Cm. In

Depth Consolidating Each Disposited Layer By Ramming And

5 layers of 20cm. thickness including watering, ramming and 208.80 301.78 Cum

consolidating etc. complete.

Providing and laying cement concrete 1:4:8 (1- Cement : 4- coarse

sand : 8- hand broken stone aggregates 40 mm nominal size) and

curing complete excluding cost of formwork in (A) Foundation

and Plinth

Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse

7 sand : 6- crushed stone aggregates 20 mm nominal size) and curing 6.10 4152.60 Cum

complete including cost of formwork in (A) Wall Caps / Coping

Providing and laying controlled cement concrete M.200 for curing

complete including cost of formwork and excluding cost of

reinforcement for reinforced concrete work in Lintel for all

floors level. (Cement Level 360 Kg)

Providing and laying controlled cement concrete M.200 for curing

complete including cost of formwork and excluding cost of

reinforcement for reinforced concrete work in coping for all

floors level. (Cement Level 360 Kg)

Providing and laying controlled cement concrete M.200 for curing

complete including cost of formwork and excluding cost of

10 reinforcement for reinforced concrete work in Chhajja for all 2.79 5364.11 Cmt.

floors level including finishing with cement mortar 1:3 ( 1 cement :3

Sand ) and curing etc complete. (Cement Level 360 Kg)

Providing and laying controlled cement concrete M.200 for curing

complete including cost of formwork and excluding cost of

reinforcement for reinforced concrete work in Beams for all

floors level. (Cement Level 360 Kg)

Providing and laying controlled cement concrete M.200 for curing

complete including cost of formwork and excluding cost of

reinforcement for reinforced concrete work in Slab for all floors

level. (Cement Level 360 Kg)

Providing and laying controlled cement concrete M.200 for curing

complete including cost of formwork and excluding cost of

13 reinforcement for reinforced concrete work in sloping slabs & 10.66 5410.57 Cmt.

Staircase having thickness more than 10 cm and upto 20 cm

thickness.For all floors. (Cement Level 360 Kg)

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and excluding cost of

reinforcement for reinforced concrete work in (A) Foundations,

footings, Base of columns and Mass concrete. (upto 10 ton)

Providing and laying controlled cement concrete M.250 for curing

complete including cost of formwork and excluding cost of

reinforcement for reinforced concrete work in Plinth Beams.

(Cement Level 380 Kg)

Providing and laying controlled cement concrete M.250 for curing

complete including cost of formwork and excluding cost of

reinforcement for reinforced concrete work in Lintel for all

floors level. (Cement Level 380 Kg)

Description Of Item Quantity Rate Unit Amount

Providing & laying Controlled cement concrete M-250 and finishing

smooth with curing etc. complete including the cost of formwork but

17 excluding the cost of reinforcement for R.C.C. work in slabs, Sunk 514.99 6418.55 Cmt.

Slab & Beam having thickness more than 10 cm and upto 20 cm

thickness.For all floors

Providing and laying controlled cement concrete M.250 for curing

complete including cost of formwork and excluding cost of

18 reinforcement for reinforced concrete work in Chhajja for all 2.79 5507.53 Cmt.

floors level including finishing with cement mortar 1:3 ( 1 cement :3

Sand ) and curing etc complete. (Cement Level 380 Kg)

Providing and laying controlled cement concrete M.250 for curing

complete including cost of formwork and excluding cost of

reinforcement for reinforced concrete work in Column Up to

Plinth & all floors.. (Cement Level 380 Kg)

Providing and laying controlled cement concrete M.250 for curing

complete including cost of formwork and excluding cost of

reinforcement for reinforced concrete work in Slab for all floors

level. (Cement Level 380 Kg)

Providing and laying controlled cement concrete M.250 for curing

complete including cost of formwork and excluding cost of

21 reinforcement for reinforced concrete work in sloping slabs & 5.00 5587.32 Cmt.

Staircase having thickness more than 10 cm and upto 20 cm

thickness.For all floors. (Cement Level 380 Kg)

Providing TMT Bar FE 500D reinforcement for R.C.C. work

22 including bending, binding and placing in position complete upto 130836.41 77.29 KG

floor two level

Uncoursed Rubble Masonry with hard stone of approved quality in

23 foundations and plinth in Lime Mortar 1:1.5 (1-Lime : 1.5-coarse 328.65 2431.50 cum

sand including levelling up etc. complete

White Stone Bela mesonry block in course in superstructure with

24 stone of approved quality in Lime Mortar 1:5 (1 Cement :5- course 651.41 6507.74 cum

sand) including packing the joints etc. complete.

Brick work using common burnt clay building bricks having crushing

25 strength not less than 35 kg./Sq.Cm. in foundation and plinth in Lime 31.98 4245.09 Cum

Mortar 1: 2 (1- Lime putty : 2 -fine sand)(B) Conventional

Extra for masonry work with precast concrete block in superstructue

above plinth upto floor two level.

White Stone Bela mesonry block in course in superstructure with

27 stone of approved quality in Lime Mortar 1:6 (1-Cement : 6- course 713.72 6479.69 Cum

sand) including packing the joints etc. complete.

White Stone Bela mesonry work in partition walls upto 15 cm

thickness in cement Mortar 1:4 ( 1- Cement : 4- course sand)

Providing 10mm thick cement plaster in single coat on on

brick/concrete walls & Ceilling & Soffit of stair interior plastering in

cement mortar 1:4(1 cement 4 sand) watering, curing etc.

complete.For all floors

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering upto

floor two level and finished even and smooth in (i) Cement mortar

1:3 (1-cement:3-sand)

20mm thick sand faced cement plaster on walls above ground level

consisting of 12mm thick backing coat of cement mortar 1:3(1

cement 3 sand) and 8mm thick finishing coat of cement mortar 1:1(1

cement 1 sand) watering, curing etc.complete for any Height.

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in

flooring treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1-cement : 3-coarse sand )

finishing with flush pointing in white cement.

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in

33 skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1- 250.67 1195.02 Sqmt

cement : 3-coarse sand) and jointed with white cement slurry

Description Of Item Quantity Rate Unit Amount

Providing & laying 24" x 24" vitrified 8 mm thick tile

flooring over 20 mm (average) base of cement mortar 1:6 (

1 cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including

dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing &

cleaning the surface etc. complete for antiskit. (As Per List of

Approved Materials)

25mm thick polished Kota stone flooring/staircase treads (two

pieces with three groves in front of steps) over 20mm (average) thcik

35 base of cement mortar 1:6 (1 cement 6 coarse sand) laid over and 175.24 643.72 Smt.

jointed with grey cement slurry including curing, rubbing, and

polishing etc. complete.

Providing and laying average 25mm (20 to 30 mm) thick machine cut

for uniform colour, including fine smooth, and scratchless polishing,

(without waxing) and having thin paper joints as per sample

approved by Architect, for platforms, staircases (treads and risers),

sinks, shelves, morry, parapet top, window sill, door window jambs,

residue etc. in floor, dado or facia etc. up to 1000-1500mm. long and

with maximum width of 600 mm, including necessary machine - cut

edges (uniform thickness) rounded edges, necessary cement mortar

bedding in CM 1:3 of required thickness and jointed with grey

36 cement and fixing with anchor fastner as per drawing / specification 122.00 979.95 Smt.

and / or as directed by EIC. The rate shall be inclusive of making

rebates of 10x10mm for forming the grooves betweeen treads and

risers polishing by Six or more coats of polishing using different

grades of Emery from 40 no (one coat) 60 no (two coats) 120 no

220 no synthetic emery, 320 no emery, and protecting the flooring

uptill handing over etc. including curing, daily moping with water &

kerosene as directed for at least 15 days after final polishing or up to

the satisfaction of the Architect or Engineer-in-charge etc. complete.

(NO WAXING WILL BE PERMITTED). For all floors / all levels /

all heights.

Providing & fixing average 25mm thick Double polished Kota stones

37 for shelves in cup board, seating plat form, including curing, rubbing, 6.00 789.82 Smt.

polishing etc. complete. (As directed by Engineer in charge)

Providing and laying cement concrete flooring 1:2:4 (1- cement

: 2-coarse sand : 4-graded stone aggregate 20mm nominal

size) laid in one layer and finished with a floating coat of neat

cement. (A) 40mm thick.

providing & laying cement water proofing of average 60mm thick for

terrace for all floors using first layer cement mortar (1:3) over an

exsisting surface second layer of arranging brick bats acording to slop

adding suitable chemical to make water tieght & again third layer of

cement mortar 1:3 on above including adding water proffing

compound and finishing top with net cement slury using cement @

2.75 kg/sq mt. making any patterns and design on the top etc.

complete as directed.(As directed by Engineer in charge)

Providing and laying white glazed tiles 6mm thick in flooring treads

of steps and landing laid on a bed of 12mm thick cement mortar 1:3

(1-cement : 3-coarse sand ) finishing with flush pointing in white

Providing and laying white glazed tiles 6mm thick in skrtingrisers of

41 steps and dedo on 10mm thick cement plaster 1:3(1-cement : 3-coarse 493.45 1127.48 Rmt

sand) and jointed with white cement slurry (Tile Size 300x600)

Description Of Item Quantity Rate Unit Amount

Providing & laying Sandwich platform of maximum 700mm width a)

Sandwich type platform of top stone as 18 mm thick Granite of

approved shade and sample and bottom stone as 25 mm thick single

side polished kota stone with 25 mm thick screed of cement mortar

1:4 in between two stones. The stone shall be fixed by chasing in to

the wall surface and providing necessary MS supports of

50x50x6mm Angle or "T" (hot dip galvanised) and embedded in

between the two stones etc as per the drawing / specification and / or

as instructed of EIC complete and b) 75 mm raised platform (Otli) at

floor level with polished kota laid on 50mm screed of (1:2:4) and

skirting of kota stone as per design and approved sample. The rate

includes rounding, champhering and mirror polishing of edges, facias

of granite, MS supports, all material labour and wastage, as per

drawing, including necessary bonding adhesive (if required) of

Araldite or equivalent. Rate shall be also inclusive of making holes &

cutouts for SS sink, Oval wash basin, Piller tap / Bib tap etc. as

directed by engineer in charge. (Only finished single side granite

work shall be measured & paid for).

Providing and fixing 600mm x 450mm bevelled edge mirrror of

superior glass mounted on 6mm thick A.C. sheet or plywood sheet

and fixing to wooden pluge with C.P.

brass screws and washers.

Providing & Laying Broken China Mosaic flooring for plain & curve

surface 12mm to 20mm of broken piece of ceramic tiles or Glazed

tiles ( one or more colour as directed by Engg. In charge ) to be laid

over cement mortar bedding of CM 1:3 to plain or and slopes and to

44 be tempered to bring mortar cream up to and colour pigment 628.08 499.50 Smt.

including rounding of junctions and extending them pu to 15cms

along the wall and curing with bends any patterns of designs as per

deawing or directions including cleaning with water and oxilic acid

using 1 kg / 1 bag of water proofing materials.

Providing cement vata (10 cm X 10 cm size) quartar round in cement

mortar 1:1 including neat cement finishing, watering etc. complete

Respectely plaster acitivity shall be commenced only after completion

of vata work.

Providing wood work in frames of Doors, windows cleare story

46 windows and othersimilar works wrought, framede and fixed in 279.43 610.23 10CU.DM.

position. (A) Indian Teak Wood

Providing and fixing 35 mm thick shutters for Doors, windows and

47 clearstory windows including blackenamelled M.S. butt hinges with 46.20 4101.06 Sqm

necessary screws. (A) Indian teak wood. (i) Fully Panelled.

(ii) Providing and fixing glazed louvered glass windows and

ventilators with teak wood frame 10cm. x 7cm. size including 3 coats

of oil painting to wood work etc.complete. with wooden louvers

plank 12mm thick

Providing & fixing in position mild steel door with ventilation frame

40x40x6 mm and shutter frame 35x35x5mm ,75x5 mm ms flate at

lock rail,10 mm square bar in vent at10 cm c/c coverd with

49 corrugated ms sheet 0.6 mm thick, including applying a priming coat 50.40 3888.50 Smt.

of read lead paint including cleanicn the surface of all dirt, dust and

other foreign matter (As directed by Engineer in charge& approved

drawing and design etc.)

Providing & fixing in position mild steel window with ventilation

frame 35x35x5 mm and shutter frame 25x25x5mm ,10 mm square

bar grill at10 cm c/c coverd with corrugated ms sheet 0.6 mm

thick,including applying a priming coat of read lead paint including

cleanicn the surface of all dirt, dust and other foreign matter (As

directed by Engineer in charge& approved drawing and design etc.)

Providing & fixing M.S. railing & m.s grill as per approved drawing

& design including one coat of red lead paint etc. complete including

applying a priming coat of read lead paint with two coat of Oil

Painting over new steel surfaces,brushing, interior to give an even

shade including cleaning the surface an even shade including cleanicn

the surface of all dirt, dust and other foreign matter as per approved

drawing and design etc. (As directed by Engineer in charge&

approved drawing and design etc.)

Description Of Item Quantity Rate Unit Amount

Providing and fixing 30mm thick FACTORY MADE SOLID

SINGLE SIDE PRELAM PANEL PVC DOOR SHUTTER

consisting of frame made out of M.S. tubes of 19 gauge thckness and

size of 19mm x 19mm for stiles, and 15mm x 15mm for top and

bottom rails. The M.s. frame shall have coat of steel primers of

approved makde and manufacture. The M.S. frame shall be covered

with 5mm thick heat moulded single side prelim PVC ‘C’ channel of

size 30 x 50mm to form stiles and 5mm thick and 75mm wide single

side prelim PVC sheets shallbe for the top, bttom and lock rails.

Paneling of 5mm thick one side prelim sheet to be fitted in the M.S.

frame and sealed to the front (Prelam side) stiles and rails (which

should have a 5mm 45 degree bent portion as beading) and attached

to the back (white/lvory) stiles and rails (which should have a 10mm

90 degree bent portion as beading) using 2 nos. 15mm wide x 5mm

thick PVC sheet beading inside the 9 degree bent beading. All stiles,

rails and beading to be joined to the panel using solvent cement.An

additional 5mm thick PVC strip of 20mm width is to be struck on the

interior side of the ‘C’ channel using PvC solvent adhesive and

10mm thick (5mm x 20) thick 20mm width cross PVC sheet to be

fitted as gap insert for top and bottom rails, etc. complete as per

direction of Engineer in charge, manufacture’s specification and

Fixing Metallic tower bolts of sizes with necessary screws etc.

complete (Tower bolts and screws to be paid under separate items)

Fixing metallic or plastic door handles of sizes with necessary screws

54 etc. complete (Door handles and screws to be paid under separate 54.00 3.85 Each

Fixing metallic door latches of sizes with necessary screws etc.

complete (Door latches and screws to be paid under separate items)

Fixing metallic floor door stoppers of sizes with rubber cushion

56 screws etc. to suit shutter thickeness complete (Floor door stopper 54.00 4.35 Each

with rubber cushion and screws to be paid under separate items)

Fixing metallic door handles or knobs for mortice locks with

57 necessary screws etc. complete (Door handles /knobs and screws to 54.00 3.85 Each

be paid spearately)

Providing and fixing post and pipe railing as per detailed drawing

58 including 3 coats of painting to steel works 14.40 1214.22 Rmt

Applying two coats of putty & two coats of primer of approved brand

and manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth.

Distempeing (Two coats) with oil bound distemper of approved

brand and manufacture and of required shade on wall surfaces to give

an even shade, over and including a priming coat with distemper

primer of approved brand and manufacture after thoroughly brushing

the surface free from mortar dropping and other foreign matter and

also including preparing the surface even and sand papered smooth.

Painting two coates (Including Priming coat) over new steel and other

metal surfaces with enamel paint, brushing, interior to give an even

shade including cleaning the surface of all dirt, dust and other foreign

matter etc. complete.

Finishing wall with weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of

loose powdered materials.etc complete

Wall painting (two coats) with plastic emulsion paint of approved

brand and manufacture on undecorated wall surface to give an even

shade including throughly brushing the surface free from mortar

droppings and other foreign matter and sand papered smooth

including Applying Two coats of Birla or Asian Lapy Putty etc

complete on celing, wall, stair soffit, etc. complete. For all floor.

Painting of SSA logo on front side wall as directed by Engineer in

charge and as per approved drawing.

Description Of Item Quantity Rate Unit Amount

Landscaping work

Providing and laying Neelgiri/Mexican grass turf with earth 50mm to

60mm thickness of existing ground prepared with proper level and

65 ramming with tools wooden (Dhurmos) and than rolling the surface 665.00 216.54 Sqmt

with light roller make the surface smoothen and light waterning with

sprinkler and maintenance for 30 days or more till the grass establish

properly, as per direction of officer-in-charge.

Providing and fixing pre-cast concrete kerb stone of gray cement

based concrete block 30cm length,30cm height and 15cm thick of

66 M250 grade concret as per approved design and including excavation 112.90 374.92 Rmt

for fixing in proper line and level,filling the joint with C:M 1:3

(1cement:3fine sand) etc complete.

Providing and laying broken chine mosaic flooring for terrace using

12 mm to 20 mm broken pieces of glazed tiles to be laid over cement

mortar 1:3 to plain or slope and to be tempered to bring mortar creme

out upto surface using white cement including rounding off junctions

and extending them upto 15 cm along the wall,clearing with water

and oxalic acid etc. as directed.

Carring out plinth treatment to post construction / existing structure

by spraying chemical solution for termite control treatment including

labour and material consistment with I.S.I specification. Using

Chlordene and Chiorpurfiles 20 EC. As Per 6131_paret-II

Consentration Weight one percent is recommended i.e one litre 20 EC

chemical emulsion with 19 liter give 1 % concrentration inclusive of

one litre chemical emulsion appication at the rate of 5 Litre chemical /

Sqm of surface is recommended as per I.S

Supply, transportation, lifting , handling and installation of Fiberglass

Reinforced polymer resin (F.R.P.) design Cornice of size 450mm

x300mm[to be confirmed as per final approved design], Minimum

mm thick of required colour, size and design as per Architect dwgs in

perfect void free surface, having smooth gradual slope curvature

including required MS reinforcement to avoid deformation. The

cornices shall be UV-resistant,weather-proof and should be

manufactured using Standard Polyester resin duly reinforced with

fiber glass chopped strand mat. All to be as per design details as per

dwgs, 3D, of various sizes as per elevation dwg. All Cornices will be

fixed with ss screws/ fastners will have to be countershunk, the caps

to be filled with resin, sanded etc ready to recieve paint. Fixing to be

done at First Floor & 7th Floor *(Not Restrcited to), tools tackles,

and with all safety PPE such as halmet, safety shoes and safety belts

etc. Joining of moulding to be exactly match the design, with resin,

sanding etc

ready to recieve paint. etc, screws / fastners will be ss to avoid

corrosion, will be countershunk and cap filled with resin to show a

continous cornices.The Cornice shall be UV-resistant, weather-proof

& should be manufactured using Standard material TDS aapproved

and complete satisfaction of the engg incharge with safety PPE, other

required measure.

Including necessary support frame works, Anchors, fixtures,

consumables, screws, End Termination, GFRC surface to receive

Texture paint.

Ref Dwg- WD- 900,WD -901 Mode of Measurement - "Linear in

covered Length".

Description Of Item Quantity Rate Unit Amount

Supply, transportation, lifting , handling and installation of Fiberglass

Reinforced polymer resin (F.R.P.) design Cornice of size 450mm

mm[to be confirmed as per final approved design], Minimum 4 mm

thick of required colour, size and design as per Architect dwgs in

perfect void

free surface, having smooth gradual slope curvature including

required MS reinforcement to avoid deformation. The cornices shall

be UV-resistant,

weather-proof and should be manufactured using Standard Polyester

resin duly reinforced with fiber glass chopped strand mat. All to be as

design details as per dwgs, 3D, of various sizes as per elevation dwg.

All Cornices will be fixed with ss screws/ fastners will have to be

countershunk,

the caps to be filled with resin, sanded etc ready to recieve paint.

Fixing to be done at First Floor & 7th Floor *(Not Restrcited to),

tools tackles,

and with all safety PPE such as halmet, safety shoes and safety belts

etc. Joining of moulding to be exactly match the design, with resin,

sanding etc

ready to recieve paint. etc, screws / fastners will be ss to avoid

corrosion, will be countershunk and cap filled with resin to show a

continous cornices.

The Cornice shall be UV-resistant, weather-proof & should be

manufactured using Standard material TDS aapproved and complete

satisfaction of

the engg incharge with safety PPE, other required measure.

Including necessary support frame works, Anchors, fixtures,

consumables, screws, End Termination, GFRC surface to receive

Texture paint.

Providing & fixing G.I rain water Spout of 65mm dia and 60cm

Total Rs. :

I/We am/are willing to carry out the work at………………….% above/below percent

(Should be written in figures and words) of the estimated rate mentioned above.

Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct……………………… % below Deduct……………………… % Above

In words In words