SPL REPAIR TO ROAD AT VARIOUS AREA OF RAMGARH CANTT UNDER GE RAMGARH

Repair to pot holes any depth, n.exc 1 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in road, path etc cutting around edge to at least 25 mm in depth, making good by filling in screened & graded road metal, watering, well ramming, compacted and rolled with 8 to 10 tonne power road roller to a uniform smooth surface completed all as directed.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces exc 50 mm and n. exc 100 mm deep in area exc 400 sqm complete all as directed.

M&L for preparation of unsurfaced WBM/BM surface by wire brushing for removing caked mud etc and sweeping with brooms and finally fanning the cleaned surfaces with compressed air to remove all dirt and applying a priming coat of bitumen primer @ 10kg/10 Sqm of VG-10 grade bitumen complete all as directed.

M & L for premix bitumious macadam maximum up to 75mm consolidated thickness with 4% binder content (VG-30 grade) by weight of total mix, paving bitumen of any penetration laid/spread uniformly by means of mechanical paver over WMM/BM surface and rolled with 8 to 12 tonne power roller to required camber and gradient complete all as directed.

M&L of preparation of existing black top surfaces by wire brushing for removing caked mud etc and sweeping with brooms and finally fanning the cleaned surfaces with compressed air to remove all dirt and applying a priming coat of bitumen primer @5 kg/10 sqm of VG-10 grade bitumen complete all as directed.

M&L Bituminous premixed semi dense asphaltic concrete 40 mm consolidated thickness with 5.5% binder content (VG-30) by weight of total mix rolled and compacted to required camber and gradient complete prepared in hot mix plant and spread with mechanical paver and rolled complete all as directed.

Demoliton of cement concrete (un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as directed.

M&L Cement concrete in , as in hardstanding/ flooring etc. and casting in alternate panel, type B- 1, 1:2:4 (using 20mm graded stone aggregates) including necessary form work etc complete all as per directed.

M&L Forming 12mm thick Expansion joints filled up to 100mm thick with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ complete all as per directed.

M&L Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound, Grade ‘A’ complete all as per specified and directed.

Spike rolling to paving / Path/Harrdstanding surfaces or making impressions of expanded metal, whilst the concrete is green complete all as directed.

Dismantling of Interlocking tiles,Stone slabs and tiles of any description or thickness in floors, aprons complete all as directed.

M&L Sand cushining/filling under floor compacted bed of sand complete all as directed.

M&L for Machine pressed precast concrete interlocking paver block (Red & Yellow) 80mm thick with grey cement and no pigment any shape and size confirming to IS 15658-2006 of M-40 grade Complete all as directed.

M&L 100mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars etc. complete as directed.

Demolition of cement concrete reinforced as in chullah hoods , shelves, cover slab and plate form etc complete all as directed.

M&L Precast RCC (1:2:4) Type B 1 using 20mm graded stone aggregate as in cover slab of drain set in cement mortar 1:4 complete all as directed.

M&L mild steel TMT bars 10mm dia & over, cut to length bent to shape as required including cranking bending spirally for columns, hooking ends binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as directed.

S&F mild steel TMT bars 6 to 8mm dia cut to length bend to shape as required including cranking bending spirally for hooping for columns, hooking and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as directed.

Demolition of brick work built in cement mortar incl all quoins, arches, pillar etc complete all as directed.

M & L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as directed.

Taking down cement plaster on wall of any description incl racking out joints hacking for key and scrubbing down with water complete all as directed.

M&L 15mm thick rendering on fair faces of brick /concrete surfaces in cm (1:4), finished even and fair (without using extra cement ) complete all as directed.

M&L Cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregates) as in levelling course, coping, window cill etc. including necessary form work etc. complete all as directed.

M&L PCC (1:2:4) type B1 using 20 mm graded aggregete as in surface channel or drain finish even & smooth including necessary form work etc complete all as directed.

M&L three coat of white wash on newly prepared surfaces on wall , etc complete all as directed.

M&L for preparing bituminous surfaces of road and marking paint with hot applied thermoplastic road marking paint 1.50 mm thick centre lines ,stop lines, dashes ,arrows etc. and the like n. exc 10 cm wide having clear and sharp edges over road surfaces including straightening portion, curve etc in any situation of approved colour white/yellow, in a layer of CRYSTALEX and use of all ingrediants such as binder, glass, beads, titanium dioxide, calcium carbonate,filler thermoplastic required for glass beads per sqr mtr white glass beads for reflectivitiy all as per manufacturers instruction confirming to BS 3262-1989 with special applicator machine complete all as directed..

S&F in repair road stud reflective type of metal body with PAMA strip lens reflector with MS stud of of size 100mm x 100mm x 20mm fixed with adhesive as per manufacturer’s instructions complete all as directed.

S&F in repair metal tubular delineator made out of ABS round body fitted with 02 nos 65 mm dia highly reflective reflectors made out of PMPA and mounted on 45/50 mm dia 16 gage, mild steel pipe of 750 mm height duly powder coated and thermo plastic elastomer three bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x450mm) as per manufacturer's instructions complete all as directed.

S&F in repair Solar road stud of size 125mm x 125mm x 25mm (shank 65mm) made of aluminium alloy , 100% water proof with high efficiency mono crystalling solar panel 2.4 V/ 0.30 watt , one Ni-Mh or Ni-Cd rechargable battery (1.2v/1600MA), six super bright LEDs with 10000 to 18000 mcd, bearing weight of 10 tonnes (appx) fixed as per manufacturer's instructions complete all as directed.

S&F in repairs of convex mirror 90cm dia polycarbonate wide angle unbreakable safety convex mirror with installation kit and adjustable fixing bracket and provided with suitable MS pipe post, duly powder coated complete all as directed.

Screening road metal, Chippings, etc. on the site of the work, when specially ordered, including removing screened materials clear of screen and stacking in separate heaps for measuring (Materials from both sides of screen measured) complete all as directed.

S&F in repairs of reflective glow sign board of trapezoids size [(0.80m*0.85m) +1/2*(0.40m+0.80m) *0.55m] made out of 1.25mm thick stainless steel sheets, welded to SS grade 304 frame of 40mm SS pipe & fixed with stainless steel clip to joint with 70mm dia SS posts up to 3.00 & 3.40 m height (1+1 Nos) and letters on both side (Hindi and English) of size not less than 75mm height and width not less than 50mm each embeded with PCC 1:3:6 type C2 complete all as directed. Note : The rate quoted is inclusive of earth work, concrete etc complete.

S&F in repair Rubber speed bump/ breakers made from heavy tough rubber and polythene with high resistance wear and tear properly best suitable height of 3" for speed reflective mark showing arrows in white are marked on both sides of yellow and black pieces. Each side have a end cap of size 250 × 350 × 50mm and middle size of the speed breaker is 250 × 350 × 50mm with four holes the whole breaker is fixed along with epoxy and hardener and bolts supply with epoxy and hardner as required complete all as directed.