PAINTING WORK AND CONSTRUCTION OF SMALL BRIDGE FROM RAJAPUR LINK ROAD (GRAM PANCHAYAT JALALPUR) TO VILLAGE SHIVPURA (R.V. SHIVPUR SEMRA) IN BLOCK NAWABGANJ IN DISTRICT-BAHRAICH FINANCIAL YEAR 2026-27 (VIDHANSABHA-MATERA)

Construction of embankment with approved materials excavated from roadway sides in cutting or filling lift upto 1.50m with normal lead upto 50m. spreading, grading to required slope and compacting to meet requirement of table 300.1 and 300.2 as per technical specification clause 301.5.

Earth work in excavation in trenches for widening of road in ordinary soil (loan clay or sand) including lift upto 1.5m lead upto 50m and dressing of sides and ramming of bottom and disposal of surplus excavated earth as directed by the E/I within a lead of 50m

Granular Sub-base with well Graded Material (Table400.1) By Mix in Place Method-Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.

WBM Grading 2-Providig, laying, spreading and compacting stone aggregated of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth whee roller 80-100 Kn in stages to proper grade and camber, applying and brooming, stone screening / binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clauses 405.

WBM Grading 3-Providing, laying, spreading and compacting stone aggregate of 22.4-53 mm size to water bound macadam grade-3 specification including spreading in uniform thickness, hand packing, rolling with smooth whee roller 80-100 Kn in stages to proper grade and camber, applying and brooming, stone screening / binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density Clauses 405.

Providing and applying primer coat with bitumen emulsion (SS-2) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means clause 502 ( Including cost of Primer)

Providing and applying Tack coat with bitumen VG-10 using rate of 0.35 kg per sqm on the prepared granular surfaces treated with primer & cleand with Hydraulic broom clause 503 ( Including cost of Bitmen

Providing, laying and rolling of open - graded premix carpet of 20mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of Type C as per Technical Specification Clause 508. ( Including cost of Bitmen)

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510 ( Including cost of Bitmen)

Cement Concrete Pavement -Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days including Trimixing by floating method & adding hardener in required quantity and depth upto 5 cm complete as per directions of Engineer-In-charge to meet Tenchinal specifications.