Providing, installation, testing and commissioning of submersible pumpset of 8000 GPH x 60 mtrs head along with allied electro-mechanical works at tube well cum p/stn. Kamilla II.

Amount

Providing, Installation, Testing and Commissioning of 8000 GPH X 60 Mtr. head submersible pump set-01 no. as per IS reputed make along with allied electro-mechanical works at Tube Well cum P/Stn. Kamila IInd. Providing of 8000GPHx60mtr head submersible pump set to the site of installation. Fabrication of adopter Nipple and threading the Pipe for screwing into the delivery portion to the submersible pump and other end of the adopter nipple is welded with MSflange of required size fabricated out of MS Plate for fixing with the column pipe. Two number nuts of required size are to be welded on opposite side so that clamping bolt ofthe tie rod can pass through it. Fabrication of the tie rod clamping arrangement for clamping the pump and motor to the upper adopter nipple, fabricated out of MS Plate asper required size at site. The upper ends of these flat strips should be welded with full threaded bolt. These bolts are to be passed through the nuts welded on the adopternipple piece, fastening of double nuts on both sides. Coupling of both pump and motor, properly checking of movement of the pump, tightening of the adopter nipples to thedelivery side of both the pumps, tightening of tie rods. Providing and fitting of 2 no’s sets of 80mm MS Clamp set for holding column pipes. Shifting of the submersible pump to the site of installation at tube well. Providing &fitting of 3 core 10mm sq submersible cable with suitable length as per lowering in tube well, connecting of one end of cable to submersible motor and other end shall be duly connected with control Panel/MUG. Extraction of the existing submersible pump set and Lowering of new submersible pumpset into the tube well alongwith the column pipes and requisite material such as rubber flanges, nut/ bolts by using special tools and tackles. The job also includes repair/replacement of damaged column pipes if any. Making all electrical connections of submersible Pump set with control panel by proper thimbling and crimpling all cable ends and then testing and checking for specified amperage on full load. Providing /fitting of MUG 30 for the operation of submersible pump set. The job includes cost of material, manual as well as mechanical carriage, cost of hiring tools and tackles, labour charges etc. Complete Job.

Radiant Engineering Works

JAGDEMBAY MECH ENGG WORKS